Facile Generation of Tumor‐pH‐Labile Linkage‐Bridged Block Copolymers for Chemotherapeutic Delivery

Successful bench‐to‐bedside translation of nanomedicine relies heavily on the development of nanocarriers with superior therapeutic efficacy and high biocompatibility. However, the optimal strategy for improving one aspect often conflicts with the other. Herein, we report a tactic of designing tumor‐pH‐labile linkage‐bridged copolymers of clinically validated poly(d,l ‐lactide) and poly(ethylene glycol) (PEG‐Dlink_m‐PDLLA) for safe and effective drug delivery. Upon arriving at the tumor site, PEG‐Dlink_m‐PDLLA nanoparticles will lose the PEG layer and increase zeta potential by responding to tumor acidity, which significantly enhances cellular uptake and improves the in vivo tumor inhibition rate to 78.1 % in comparison to 47.8 % of the non‐responsive control. Furthermore, PEG‐Dlink_m‐PDLLA nanoparticles show comparable biocompatibility with the clinically used PEG‐b‐PDLLA micelle. The improved therapeutic efficacy and safety demonstrate great promise for our strategy in future translational studies.     

Synthesis of New Graft Copolymers by Combining the DPE Technique and Cationic Polymerization

The synthesis of a new macroinitiator for cationic polymerization via radical polymerization is presented. The macroinitiator, consisting of poly(methyl methacrylate)‐block‐poly[styrene‐co‐(4‐chloromethylstyrene)], was synthesized by heating poly(methyl methacrylate), prepared in the presence of 1,1‐diphenylethylene, in a mixture of styrene and 4‐chloromethylstyrene to 85°C without any additional initiator. The resulting macroinitiator could be used for the cationic polymerization of isobutylene yielding graft copolymers.     

Self‐Assembled Micelles Based on PEG‐Polypeptide Hybrid Copolymers for Drug Delivery

A series of amphiphilic poly(L ‐leucine)‐block‐poly(ethylene glycol)‐block‐poly(L ‐leucine) (PLL‐PEG‐PLL) hybrid triblock copolymers have been synthesized. All the blocks in this system have good biocompatibility and low toxicity. The PLL‐PEG‐PLL copolymers could self‐assemble into micelles with PLL blocks as the hydrophobic core and PEG blocks as the hydrophilic shell, which were characterized by FT‐IR, ¹H NMR, and transmission electron microscopy analysis. The critical micellar concentration of the copolymer was 95.0 mg · L⁻¹. The circular dichroism spectrum shows that the PLL segments adopt a unique α‐helical conformation, which is found to play an important role in controlling the drug release rate. The drug release could be effectively sustained by encapsulation in the micelles. The copolymers may have potential applications in drug delivery.

     

In Vitro Drug and Gene Delivery Using Random Cationic Copolymers Forming Stable and pH‐Sensitive Polymersomes

Stimuli‐sensitive polymeric vesicles or polymersomes as self‐assembled colloidal nanocarriers have received paramount importance for their integral role as delivery system for therapeutics and biotherapeutics. This work describes spontaneous polymersome formation at pH 7, as evidenced by surface tension, steady state fluorescence, dynamic light scattering, and microscopic studies, by three hydrophilic random cationic copolymers synthesized using N ,N‐(dimethylamino)ethyl methacrylate (DMAEM) and methoxy poly(ethylene glycol) monomethacrylate in different mole ratios. The results suggest that methoxy poly(ethylene glycol) chains constitute the bilayer membrane of the polymersomes and DMAEM projects toward water constituting the positively charged surface. The polymersomes have been observed to release their encapsulated guest at acidic pH as a result of transformation into polymeric micelles. All these highly biocompatible cationic polymers show successful gene transfection ability as nonviral vector on human cell line with different potential. Thus these polymers prove their utility as a potential delivery system for hydrophilic model drug as well as genetic material.

     

Molecular Nanoworm with PCL Core and PEO Shell as a Non‐spherical Carrier for Drug Delivery

Core/shell wormlike polymer brushes with densely grafted poly(ϵ‐caprolactone)‐b‐poly(ethylene oxide) (PCL‐b‐PEO) are synthesized via grafting an alkynyl terminated PCL‐b‐PEO (ay‐PCL₁₇‐b‐PEO₁₁₃) onto a well‐defined azido functionalized polymethacrylate (PGA₉₄₀) and are evaluated preliminarily as a single molecular cylindrical vehicle for drug delivery. Water soluble molecular worms of ca. 230 nm are obtained and then the anticancer drug doxorubicin (DOX) is loaded into its PCL core by hydrophobic interaction. Compared with spherical micelles from linear PCL₁₇‐b‐PEO₁₁₃, the brushes demonstrate a lower loading efficiency but a faster release rate of DOX. Confocal laser scanning microscopy measurements show that DOX‐loaded cylindrical molecular brushes can easily enter into HeLa and HepG2 cells in 1 h.     

The Influence of Crosslinking Amylose-Methacrylic Acid Graft Copolymers on the Release of BSA

Summary: One of the biggest challenges in the drug delivery field is to obtain oral systems for the release of peptides and proteins, enabling their use as therapeutic agents for clinical applications. The aim of this work is to obtain biodegradable copolymers suitable for the development of matrices which offer controlled release of proteins to be administered orally.Graft copolymers of amylose-methacrylic acid were synthesized using different amounts of the crosslinker N, N′-methylenediacrylamide. The influence on the release profiles of bovine serum albumin (BSA) was researched.     

An All‐ROMP Route to Graft Copolymers

A new versatile synthesis strategy for macromonomers has been developed that uses the living ring‐opening metathesis polymerization (ROMP) with commercial Grubbs first generation ruthenium initiators. Homopolymers as well as diblock copolymers were end‐functionalized with norbornene derivatives to serve as macromonomers. The graft copolymerization of the macromonomers was also carried out employing ROMP. Well‐defined and highly functional graft copolymers are accessible by this new synthetic route.

     

N‐Boc‐Histidine‐Capped PLGA‐PEG‐PLGA as a Smart Polymer for Drug Delivery Sensitive to Tumor Extracellular pH

A pH‐sensitive polymer was synthesized by introducing the N‐Boc‐histidine to the ends of a PLGA‐PEG‐PLGA block copolymer. The synthesized polymer was confirmed to be biodegradable and biocompatible, well dissolved in water and forming micelles above the CMC. DOX was employed as a model anticancer drug. In vitro drug release from micelles of N‐Boc‐histidine‐capped PLGA‐PEG‐PLGA exhibited significant difference between pH = 6.2 and pH = 7.4, whereas DOX release from micelles composed of un‐capped virgin polymers was not significantly sensitive to medium pH. Uptake of DOX from micelles of the new polymer into MDA‐MB‐435 solid tumor cells was also observed, and pH sensitivity was confirmed. Hence, the N‐Boc‐histidine capped PLGA‐PEG‐PLGA might be a promising material for tumor targeting.

     

Synthesis of Cationic and Ampholytic Starch Graft Acrylamide and their Aqueous Salt Absorption

Acrylamide was grafted onto starch using ceric(IV) ion as initiator. Starch–graft-polyacrylamide was then modified through Mannich reaction using formaldehyde and diethylamine to give poly(N, N′-[(diethylamino) methyl]-acrylamide). The modified-graft copolymer was quaternized using different reagents; methyl iodide, n-butylbromide, sodium chloroacetate and propane sultone to give cationic and ampholytic graft materials. The absorbing properties of the produced materials toward deionized water and aqueous salt solutions were investigated. Studies of the absorbing properties of polyampholytes have revealed that these materials do not shrink upon increasing salt concentration. Kinetics of swelling in deionized water is also discussed.     

Solvent Controlled Multi‐Morphological Self‐Assembly of Amphiphilic Graft Copolymers

Summary: Amphiphilic graft polyphosphazenes (EtTrp/PNIPAm‐PPP) with different mole ratios of hydrophobic groups to hydrophilic segments were synthesized by ring‐opening polymerization and subsequent substitution reactions. The self‐assembly behavior of these graft copolymers was studied in detail by TEM, SEM, CLSM, and AFM. Depending on the copolymer composition and common organic solvent employed in dialysis process, supramolecular aggregates ranging from network, nanospheres, high‐genus particles to macrophage‐like aggregates were produced with graft copolymers.

     

Diffusion of Oligonucleotides from within Iron‐Cross‐Linked,Polyelectrolyte‐Modified Alginate Beads: A Model System for Drug Release

An analytical model to describe diffusion of oligonucleotides from stable hydrogel beads is developed and experimentally verified. The synthesized alginate beads are Fe³⁺‐cross‐linked and polyelectrolyte‐doped for uniformity and stability at physiological pH. Data on diffusion of oligonucleotides from inside the beads provide physical insights into the volume nature of the immobilization of a fraction of oligonucleotides due to polyelectrolyte cross‐linking, that is, the absence of a surface‐layer barrier in this case. Furthermore, the results suggest a new simple approach to measuring the diffusion coefficient of mobile oligonucleotide molecules inside hydrogels. The considered alginate beads provide a model for a well‐defined component in drug‐release systems and for the oligonucleotide‐release transduction steps in drug‐delivering and biocomputing applications. This is illustrated by destabilizing the beads with citrate, which induces full oligonucleotide release with nondiffusional kinetics.     

Novel PEGylated Amphiphilic Copolymers as Nanocarriers for Drug Delivery: Synthesis,Characterization and Curcumin Encapsulation

Amphiphilic polymers can self assemble into micellar nano-particles and can be effectively used as nano carriers for drug delivery. A number of macromolecular delivery systems are under investigation to improve the efficacy of prospective drugs. In this study, seven new co-polymers were synthesized under mild reaction conditions in bulk (without solvent) by chemoenzymatic approach using Candida antarctica lipase (Novozyme 435) and molecular sieves, subsequently these polymers were treated with different long chain bromoalkanes and acid chlorides for attachment of the lipophilic moieties to the backbone polymer via an ether or an ester linkage, respectively in order to make them amphiphilic. These synthesized nano-particles demonstrated high drug loading capacity and have the potential to encapsulate hydrophobic drugs.     

Systemic Brain Delivery of Antisense Oligonucleotides across the Blood–Brain Barrier with a Glucose‐Coated Polymeric Nanocarrier

Current antisense oligonucleotide (ASO) therapies for the treatment of central nervous system (CNS) disorders are performed through invasive administration, thereby placing a major burden on patients. To alleviate this burden, we herein report systemic ASO delivery to the brain by crossing the blood–brain barrier using glycemic control as an external trigger. Glucose‐coated polymeric nanocarriers, which can be bound by glucose transporter‐1 expressed on the brain capillary endothelial cells, are designed for stable encapsulation of ASOs, with a particle size of about 45 nm and an adequate glucose‐ligand density. The optimized nanocarrier efficiently accumulates in the brain tissue 1 h after intravenous administration and exhibits significant knockdown of a target long non‐coding RNA in various brain regions, including the cerebral cortex and hippocampus. These results demonstrate that the glucose‐modified polymeric nanocarriers enable noninvasive ASO administration to the brain for the treatment of CNS disorders.     

Arborescent polystyrene‐graft‐poly(tert‐butyl methacrylate) copolymers: Synthesis and enhanced polyelectrolyte effect in solution

A technique is described for the preparation of arborescent graft copolymers containing poly(tert‐butyl methacrylate) (PtBMA) segments. For this purpose, tert‐butyl methacrylate is first polymerized with 1,1‐diphenyl‐2‐methylpentyllithium in tetrahydrofuran. The graft copolymers are obtained by addition of a solution of a bromomethylated polystyrene substrate to the living PtBMA macroanion solution. Copolymers incorporating either short (M_w ≈ 5000) or long (M_w ≈ 30,000) PtBMA side chains were prepared by grafting onto linear, comb‐branched (G0), G1, and G2 bromomethylated arborescent polystyrenes. Branching functionalities ranging from 9 to 4500 and molecular weights ranging from 8.8 × 10⁴ to 6.3 × 10⁷ were obtained for the copolymers, while maintaining a low apparent polydispersity index (M_w/M_n ≈ 1.14–1.25). Arborescent polystyrene‐graft‐poly(methacrylic acid) (PMAA) copolymers were obtained by hydrolysis of the tert‐butyl methacrylate units. Dynamic light scattering measurements showed that the arborescent PMAA copolymers are more expanded than their linear PMAA analogues when neutralized with NaOH. This effect is attributed to the higher charge density in the branched arborescent copolymer structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2335–2346, 2008     

A Novel Temperature‐Responsive Polymer as a Gene Vector

A temperature‐responsive polymer poly{2‐(dimethylamino)ethyl methacrylate‐co‐[cis‐butenedioic anhydride‐poly[(N‐isopropylacrylamide)‐co‐(butyl methacrylate)]]} (PDMNIB) was synthesized by free radical polymerization. The polymer had a significant temperature‐responsive behavior with a lower critical solution temperature (LCST) at 20 °C. Gel retardation assay showed that PDMNIB could efficiently interact with DNA. Dynamic light scattering (DLS) and zeta potential measurement indicated that the average sizes and the surface electric charges of the PDMNIB/DNA complexes could be changed by temperature. Due to the thermosensitive interaction between PDMNIB and DNA, the gene transfection efficiency of PDMNIB could be improved by temperature.