Theoretical Study on Second‐order Nonlinear Optical Properties of Substituted Thiazole Derivatives

On the basis of ZINDO program, we have designed a program to calculate the nonlinear second‐order polarizability β_yk and β_μ according to the SOS expression. The second‐order nonlinear optical properties of 4‐nitro‐4′‐dimethylamino‐stilbene and a series of its thiazole derivatives were studied. The calculated results were that: When replacing a benzene ring in 4‐nitro‐4′‐dimethylamino‐stilbene by a thiazole ring, the influence on β values depends on the position of thiazole ring. When the thiazole ring connects with nitro group (acceptor), the β values increase significantly compared with corresponding stilbene derivatives. The β values of 2‐(p‐donor‐β‐styryl)‐5‐nitro‐thiazole derivatives (2–7) are larger than those of 2‐(p‐nitro‐β‐styryl)‐5‐donor‐thiazole derivatives (8–13) and 2‐(p‐donor‐phenyl)‐azo‐5‐nitro‐thiazole derivatives (14–19). The 2‐(p‐donor‐β‐styryl)‐5‐nitro‐thiazole derivatives (2–7) are good candidates as chromophores duo to their high nonlinearities and potential good thermal stability.     

Report on an Unusual Cascade Reaction between Azulenes and 2,3‐Dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐Dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ)

The oxidation of 1‐(3,8‐dimethylazulen‐1‐yl)alkan‐1‐ones 1 with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ) in acetone/H₂O mixtures at room temperature does not only lead to the corresponding azulene‐1‐carboxaldehydes 2 but also, in small amounts, to three further products (Tables 1 and 2). The structures of the additional products 3 – 5 were solved spectroscopically, and that of 3a also by an X‐ray crystal‐structure analysis (Fig. 1). It is demonstrated that the bis(azulenylmethyl)‐substituted DDQ derivatives 5 yield on methanolysis or hydrolysis precursors, which in a cascade of reactions rearrange under loss of HCl into the pentacyclic compounds 3 (Schemes 4 and 7). The found 1,1′‐[carbonylbis(8‐methylazulene‐3,1‐diyl)]bis[ethanones] 4 are the result of further oxidation of the azulene‐1‐carboxaldehydes 2 to the corresponding azulene‐1‐carboxylic acids (Schemes 9 and 10).     

NIR‐Absorbing π‐Extended Azulene: Non‐Alternant Isomer of Terrylene Bisimide

The first planar π‐extended azulene that retains aromaticity of odd‐membered rings was synthesized by [3+3] peri‐annulation of two naphthalene imides at both long‐edge sides of azulene. Using bromination and subsequent nucleophilic substitution by methoxide and morpholine, selective functionalization of the π‐extended azulene was achieved. Whilst these new azulenes can be regarded as isomers of terrylene bisimide they exhibit entirely different properties, which include very narrow optical and electrochemical gaps. DFT, TD‐DFT, as well as nucleus‐independent chemical shift calculations were applied to explain the structural and functional properties of these new π scaffolds. Furthermore, X‐ray crystallography confirmed the planarity of the reported π‐scaffolds and aromaticity of their azulene moiety.     

Synthesis and Reactivity of 3‐oxoprop‐1‐en‐1‐olate Derivative as a Building Block for the Synthesis of Azole and Azine Derivatives

Several new heterocyclic compounds such as 7‐substituted pyrazolo[1,5‐a ]pyrimidine ( 5a–e ) derivatives have been synthesized by the reactions of the versatile unreported sodium 3‐(4‐methyl‐2‐(4‐methylphenylsulfonamido)thiazol‐5‐yl)‐3‐oxoprop‐1‐en‐1‐olate (2) with amino heterocyclic ( 3a–e ) derivatives. Reaction of (2) with hydrazonyl halide ( 7a–d ) and hydroximoyl chloride ( 11a,b ) derivatives followed by reaction with hydrazine hydrate afforded pyrazolo[3,4‐d ]pyridazine and isoxazolo[3,4‐d ]pyridazine derivatives, respectively incorporating a thiazole moiety have been described. All newly synthesized compounds were elucidated by considering the data of both elemental and spectral analysis.     

Formation of 6,10‐Diphenyl‐Substituted Heptalene‐4,5‐dicarboxylates

It is shown that 4,8‐diphenylazulene ( 1 ) can be easily prepared from azulene by two consecutive phenylation reactions with PhLi, followed by dehydrogenation with chloranil. Similarly, a Me group can subsequently be introduced with MeLi at C(6) of 1 (Scheme 2). This methylation led not only to the expected main product, azulene 2 , but also to small amounts of product 3 , the structure of which has been determined by X‐ray crystal‐structure analysis (cf. Fig. 1). As expected, the latter product reacts with chloranil at 40° in Et₂O to give 2 in quantitative yields. Vilsmeier formylation of 1 and 2 led to the formation of the corresponding azulene‐1‐carbaldehydes 4 and 5 . Reduction of 4 and 5 with NaBH₄/BF₃ ? OEt₂ in diglyme/Et₂O 1 : 1 and BF₃ ? OEt₂, gave the 1‐methylazulenes 6 and 7 , respectively. In the same way was azulene 9 available from 6 via Vilsmeier formylation, followed by reduction of azulene‐1‐carbaldehyde 8 (Scheme 3). The thermal reactions of azulenes 1, 6 , and 7 with excess dimethyl acetylenedicarboxylate (ADM) in MeCN at 100° during 72 h afforded the corresponding heptalene‐4,5‐dicarboxylates 11, 12 , and 13 , respectively (Scheme 4). On the other hand, the highly substituted azulene 9 gave hardly any heptalene‐4,5‐dicarboxylate.     

Synthesis of 1,3‐thiazole and 1,2,4‐oxadiazole substituted spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones

Some new derivatives of spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐dione with the heterocyclic ring such as substituted thiazole and 1,2,4‐oxadiazole attached to the indolinone ring via CH₂ linkage has been synthesized in moderate yields. The synthesis have been carried out by making use of the reactivity of the NH group of the indolinone moiety present in spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐dione.     

5′‐Allyl‐2′‐benzoyloxy‐3′‐methoxy‐4‐nitroazobenzene

The structure of the title compound, 4‐allyl‐2‐methoxy‐6‐[(4‐nitrophenyl)diazenyl]phenyl benzoate, C₂₃H₁₉N₃O₅, displays the characteristic features of azobenzene derivatives. The azobenzene moiety of the molecule has a trans configuration and in this moiety, average C—N and N=N bond lengths are 1.441 (3) and 1.241 (3) Å, respectively.     

Synthesis of 4-(4-Methylsulfonylphenyl)-3-phenyl-2(3H)-thiazole Thione Derivatives as New Potential COX-2 Inhibitors

Synthesis of novel 4-（4-methylsulfonylphenyl）-3-phenyl-2（3H）-thiazole thione derivatives with functionalized diarylheterocycle pharmacophore as potential COX-2 inhibitors was described. The title compounds were synthesized by cyclocondensation of corresponding dithiocarbamate and 2-bromo-1-（4-methylsulfonylphenyl）ethanone, followed by dehydration with H2SO4. All of the target compounds were characterized by ^1H NMR, IR and mass spectral data.     

Azulene‐substituted pyranylium salts. Syntheses and products characterization

The synthesis of 4‐azulene‐substituted 2,6‐diphenyl‐ and 2,6‐dimethyl‐pyranylium salts and 2‐azulenesubstituted 4,6‐dimethyl‐pyranylium salts by nucleophilic substitution at pyranylium moiety with various azulenes was studied. The starting materials for 2,6‐diphenyl derivatives were 4 chlorinated pyranylium salts. They were obtained by the halogenation with PCl₅ of corresponding pyranones and were used either in situ or after separation. For the synthesis of dimethyl derivatives the corresponding pyranones were treated with POCl₃ and the resulted intermediate was reacted in situ with azulene. In the aim to study the influence of dihedral angle between azulene and pyranylium planes on the recorded spectra, both moieties were adequately substituted. The obtained results were in accord with the calculated values.     

A novel azocompound, 2‐(4‐phenylazoaniline)‐4‐phenylphenol: Spectroscopic and quantum‐chemical approach

A novel azocompound with two nonequivalents azo groups, 2‐(4‐phenylazoaniline)‐4‐phenylphenol, was synthesized and characterized by spectroscopic and computational analysis. An intramolecular hydrogen bonding (HB), ? O₁? H₁ ··· N₁? , involving the ? N₁?N₂? group and the proton in a neighbor hydroxyl moiety, was identified. It was found responsible for a characteristic π‐conjugated H₁? O₁? C₁₈?C₁₃? N₂?N₁? six‐membered cyclic fragment. It is worth noting that this azo group is involved in an azo‐hydrazo equilibrium, being the azo form the most stable one. This resonance‐assisted HB was characterized using the OH‐related infrared bands and the corresponding signals in ¹H NMR. In addition, conformational studies and geometrical and electronic parameter calculations were performed using the density functional theory, at B3LYP/6‐311++G** level. Bond and ring critical points were identified using the atoms in molecules theory, which allowed confirming the intramolecular HB. The second azo‐group cannot be involved in HB, but it also presents two stereoisomerics forms corresponding to cis (Z) and trans (E) configurations, with the later being the one with the lowest energy. © 2013 Wiley Periodicals, Inc.     

One‐pot three‐component synthesis of novel 2‐(3‐nitro‐phenyl)‐quinazoline‐4‐carboxylic acid derivatives

A simple and easy synthesis of 2‐(3‐nitro‐phenyl)‐quinazoline‐4‐carboxylic acid ( 3 ) has been successfully developed through a one‐pot three‐component condensation reaction of (2‐amino‐phenyl)‐oxo‐acetic acid sodium salt ( 1 ) obtained from the hydrolysis of isatin with ammonium acetate and 3‐nitrobenzaldehyde. Some novel quinazoline‐ester derivatives 4‐7 were then obtained by the reaction between the new compound 3 and various alcohols. Then, quinazoline‐amide derivatives 10‐14 were synthesized from the reaction of various amines and 2‐(3‐nitro‐phenyl)‐quinazoline‐4‐carbonyl chloride ( 8 ), obtained by the reaction of compound 3 with SOCl₂. Finally, some novel quinazoline‐azo derivatives 17‐19 were synthesized by the coupling reaction between β‐dicarbonyl compounds and the novel amino‐quinazoline derivative compound 15 , obtained by reduction of nitro‐quinazoline derivative compound 11 . Thus, a new series of quinazoline‐4‐carboxylic acid, ester, amide, and azo derivatives was synthesized and fully characterized by ¹H NMR, ¹³C NMR, IR, and mass spectrometry analysis.     

(RS)‐6‐Ethyl 2‐carboxy‐1,2,3,4‐tetra­hydro­azulene‐6‐carboxylate

The title compound, C₁₄H₁₆O₄, was obtained during the synthesis of 2,6‐disubstituted azulene derivatives. In the partially reduced azulene skeleton, the absence of a H atom at the ester substitutent position of the seven‐membered ring, as well as lengthened double bonds, indicate a conjugative stabilized system with two overlaid tautomers.     

One‐Pot Syntheses of 2‐(2‐Sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic Acid Derivatives via Reactions of 3‐(2‐Isothiocyanatophenyl)prop‐2‐enoic Acid Derivatives with Thiols or Sodium Sulfide

Two efficient methods for the preparation of 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 3 under mild conditions have been developed. The first method is based on the reaction of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoates 1a – 1c with thiols in the presence of Et₃N in THF at room temperature, leading to the corresponding dithiocarbamate intermediates 2 , which underwent spontaneous cyclization at the same temperature by an attack of the S‐atom at the prop‐2‐enoyl moiety in a 1,4‐addition manner (Michael addition) to give 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetates in one pot. The second method involves treatment of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoic acid derivatives 1b – 1d with Na₂S leading to the formation of 2‐(2‐sodiosulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid intermediates 5 by a similar addition/cyclization sequence, which are then allowed to react with alkyl or aryl halides to afford derivatives 3 . 2‐(2‐Thioxo‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 6 can be obtained by omitting the addition of halides.     

Synthesis and Antimicrobial Activities of Novel 2‐[substituted‐1H‐pyrazol‐4‐yl] Benzothiazoles,Benzoxazoles, and Benzimidazoles

In an endeavor to find a new class of antimicrobial agents, a series of novel substituted benzimidazole, benzoxazole, and benzothiazole derivatives 6 containing pyrazole moiety have been synthesized by reaction of 3‐aryl‐4‐formyl pyrazole 4 with substituted phenylenediamine or o‐aminophenol or o‐aminothiophenol 5 . Reaction of phenyl hydrazine or 2‐hydrazinopyridine 1 with substituted acetophenones 2 gave the corresponding hydrazones 3 , which on Vilsmeier–Haack reaction with POCl₃–DMF gave substituted 3‐aryl‐4‐formyl pyrazoles 4 . All final compounds 6a , 6b , 6c , 6d , 6e , 6f , 6g , 6h , 6i , 6j , 6k were evaluated for in vitro antibacterial activities against Escherichia coli and Staphylococcus aureus strains and in vitro antifungal activity against Candida albicans and Aspergillus niger strains by using serial dilution method. The antimicrobial activities were expressed as the minimum inhibitory concentration in µg/mL. The compound containing benzimidazole and benzoxazole moiety gave better antibacterial and antifungal activities than benzothiazole compounds.     

2‐Pyrazolin‐5‐One‐Based Heterocycles: Synthesis and Characterization

A novel series of pyrazoline and thiazole derivatives incorporating 2‐pyrazolin‐5‐one moiety were synthesized starting from α,β‐unsaturated ketones under the effect of hydrazine derivatives and thiosemicarbazide. The obtained pyrazolines 4a , 4b were treated with different reagents to afford N‐substituted pyrazolines 5a , 5b , 6a , 6b , 7a , 7b , 8a , 8b . N‐Thiocarbamoyl pyrazolines 12a , 12b were cyclized using phenacyl bromide, 2,3‐dichloroquinoxaline, and monochloroacetic acid afforded the novel pyrazolinyl thiazoles 13a , 13b , 14a , 14b , 15a , 15b , 16a , 16b , 16c , 16d , 16e , 16f . The newly synthesized compounds were characterized by analytical and spectral data.     

2‐Nitro‐1,4‐diaminobenzene‐Functionalized Poly(vinyl amine)s as Water‐Soluble UV‐Vis‐Sensitive pH Sensors

Summary: Nucleophilic aromatic substitution of 2,6‐O‐dimethyl‐β‐cyclodextrin (β‐DMCD)‐complexed 4‐fluoro‐3‐nitroaniline derivatives with poly(vinyl amine) (PVAm) in water results in 2‐nitro‐1,4‐benzenediamine‐functionalized water‐soluble PVAms in one step. The 2‐nitro‐1,4‐benzenediamine moiety linked to the polymer is solvatochromic and undergoes protonation and deprotonation as function of pH as shown by UV‐Vis spectroscopy. The occurrence of an isosbestic point in the UV‐Vis spectrum is suitable to directly determine the pK_a value using the Henderson‐Hasselbalch equation. The influence of the methyl group substitution of the polymer and the 2‐nitro‐1,4‐benzenediamine moiety on the pK_a is discussed.

Structure of the 4‐N,N‐dimethyl‐2‐nitro‐1,4‐benzenediamine‐functionalized PVAm and its solution in water at varying pH.     

2‐(4‐Methoxyphenyl­azo)‐4‐phenyl­phenol

The crystal structure of the title compound, C₁₉H₁₆N₂O₂, displays a trans configuration of the azo moiety, which forms an intramolecular O—H?N=N hydrogen bond. The H?N and O?N distances are 1.81 (3) and 2.581 (4) Å, respectively. The azo­benzene moiety is approximately planar, and has a dihedral angle of ca 23° with the substituted phenyl group.     

Metal‐4,4′‐azobis(3,5‐dimethyl‐1H‐pyrazole) Complexes with Seven‐ and Nine‐membered Hydrogen‐bonded Rings Originating from the Pyrrolic NH Function

The metal complexes [Cu(NO₃)₂(H₂O)₂(H₂azbpz)₂] · 2H₂O ( 1 ) and [Ni(H₂O)₄(H₂azbpz)₂](NO₃)₂ · 2H₂O ( 2 ) of 4,4′‐azobis(3,5‐dimethyl‐1H‐pyrazole) (H₂azbpz) incorporate the bipyrazole as a monodentate ligand and are associated into supramolecular architectures by hydrogen bonds and azo‐pz π interactions in the solid state. In 1 a cis configuration is integrated and the NH function adjacent to the metal‐coordinating nitrogen atom gives rise to a seven‐membered anion‐assisted hydrogen‐bonded ring around the central metal atom bringing the NH function in endo‐position to the azo‐bridge. The interplay of hydrogen‐bonds and dimeric azo‐pz π interactions in 1 forms one‐dimensional supramolecular chains, which are further interconnected by a heterodromic D_2h symmetric tetrameric water ring. In 2 a trans form of H₂azbpz is mono‐coordinated and the synergy of hydrogen‐bonded rings around the central metal atom and continuous azo‐pz π interactions form a two‐dimensional supramolecular network structure. The supramolecular packings of 1 and 2 is further underpinned by the analysis of their Hirshfeld surface areas.     

7‐Halogenated 7‐Deaza‐2′‐deoxyxanthine 2′‐Deoxyribonucleosides

The synthesis of the 7‐halogenated derivatives 1b (7‐bromo) and 1c (7‐iodo) of 7‐deaza‐2′‐deoxyxanthosine ( 1a ) is described. A partial Br→I exchange was observed when the demethylation of 6‐methoxy precursor compound 4b was performed with Me₃SiCl/NaI. This reaction is circumvented by the nucleophilic displacement of the MeO group under strong alkaline conditions. The halogenated 7‐deaza‐2′‐deoxyxanthosine derivatives 1b , c show a decreased S‐conformer population of the sugar moiety compared to the nonhalogenated 1a . They are expected to form stronger triplexes when they replace 1a in the 1 ?dA?dT base triplet.     

Synthetic Approaches towards the Sulfonamide Substituted‐1,5‐Diarylimidazole‐2‐thiones as Selective Cyclooxygense‐2 inhibitors

A new series of sulfonamide substituted 1,5‐diarylimidazole, possessing C‐2 alkylthio moiety, were synthesized for their cyclooxygense‐2 (COX‐2) inhibitory activity starting from condensation of N,N‐dibenzylaminosulfonylphenacylamine hydrochloride ( 2 ) and corresponding isothiocyanate in the presence of Et₃N, followed by alkylation in the basic medium. In concomitant with these intermediates, 2‐arylamino‐5‐arylthiazole derivatives 5 were also produced. The ratio of these two products was variable with different isothiocyanates. Final debenzylation was achieved using concentrated sulfuric acid to give the title sulfonamides 8 .