Rheology of Polydisperse Star Polymer Melts: Extension of the Parameter‐Free Tube Model of Milner and McLeish to Arbitrary Arm‐Length Polydispersity

Summary: This paper considers the extension of the parameter‐free tube model of Milner and McLeish for stress relaxation in melts of monodisperse star polymers to star polymers whose arms have a continuous molecular weight distribution such as the Flory distribution in the case of star‐nylons and star‐polyesters. Exact expressions are derived for the relaxation spectrum and the relaxation modulus for star polymers having an arbitrary continuous arm‐length distribution. For a Flory distribution a comparison is made with results of dynamic measurements on a melt of 8‐arm poly(ε‐caprolactone) (PCL) stars. An excellent quantitative agreement over a large frequency range is found, however, only if one treats, in contrast with the original parameter‐free tube model approach, the entanglement molecular weight that determines the relaxation spectrum as a fitting parameter independent of the entanglement molecular weight of the linear PCL. This discrepancy is not in anyway related to the polydispersity in arm‐length, but a consequence of the thermorheological complexity of the PCL stars. A similar discrepancy has been observed for hydrogenated polybutadiene stars, as described by Levine and Milner.

Measured and calculated storage moduli G′ as a function of frequency ω.     

Synthesis and Ring Opening Polymerization of a New Functional Lactone, α‐Iodo‐ε‐caprolactone: A Novel Route to Functionalized Aliphatic Polyesters

A new functional lactone, α‐iodo‐ε‐caprolactone (αIεCL), was synthesized from ε‐caprolactone by anionic activation using a non‐nucleophilic strong base (lithium diisopropylamide) followed by an electrophilic substitution with iodine chloride. Ring‐opening (co)polymerizations of the resulting monomer with ε‐caprolactone were carried out using tin 2‐ethylhexanoate as a catalyst in toluene at 100 °C. Homopolymerization of αIεCL was achieved, and poly(αIεCL) was fully characterized by SEC, ¹H NMR and elemental analysis. Random copolymerizations of αIεCL with εCL were controlled with experimental molecular weights close to the theoretical values, narrow molecular weight distributions and a good agreement between experimental and theoretical molar compositions of αIεCL.

     

Crystallization of Poly(ε‐caprolactone)/Poly(vinyl chloride) Miscible Blends Under Strain: The Role of Molecular Weight

Summary: The effect of poly(ε‐caprolactone) (PCL) molecular weight on the orientation of crystalline PCL in miscible poly(ε‐caprolactone)/poly(vinyl chloride) (PCL/PVC) blends, melt crystallized under strain, has been studied by a combination of wide angle X‐ray diffraction (WAXD) and small angle X‐ray scattering (SAXS) studies. An unusual crystal orientation with the b‐axis parallel to the stretching direction was observed in miscible PCL/PVC blends with PCL of high molecular weight (>21 000). SAXS showed the presence of nanosize confined PCL in the PCL/PVC blends, which could be preserved at temperatures higher than the T_m of PCL but lower than the T_g of PVC. A mechanism based on the confinement of PCL crystal growth was proposed, which can explain the formation of b‐axis orientation in PCL/PVC blends crystallized under strain.

SAXS pattern of stretched PCL/PVC blend after annealing at 90 °C for 5 min.     

Ring‐Opening Polymerization of ε‐Caprolactone by Poly(ethylene glycol) by an Activated Monomer Mechanism

Summary: The polymerization of ε‐caprolactone (CL) in the presence of HCl · Et₂O by an activated monomer mechanism was performed to synthesize diblock or triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(ε‐caprolactone) (PCL). The obtained PCLs had molecular weights close to the theoretical values calculated from the CL to PEG molar ratios and exibited monomodal GPC curves. We successfully prepared PEG and PCL block copolymers by a metal‐free method.

The non‐metal catalyzed living ring‐opening polymerisation of ε‐caprolactone by PEG.     

Span‐Length Distributions of Star‐Branched Polymers

Many relations between the physical, rheological or mechanical properties of linear polymers and their molar mass are well known. For disperse polymers, parameters that express these relations are typically related to (a combination of) the moments of the molar‐mass distribution. Properties of branched, nonlinear polymers have been far more difficult to describe in the form of general relations. Monodisperse star polymers or regular stars, with a distinct number of arms and equal arm length, are the simplest member of the family of branched polymers and have served as model compounds in many studies. For these regular stars, the relation between zero shear viscosity and arm or span length has been determined. To establish equivalent relations for disperse star‐branched polymers, it is important to assess the span‐length distribution and its moments; these parameters can be calculated when the distribution of the molar mass of the arms of a star‐branched polymer is known, for instance, for a known polymerization mechanism.

Span‐length probability functions of star‐branched polycondensates with x_n = 100: f = 1 (•), f = 2 (○), f = 3 (▪), f = 5 (□), and f = 10 (+).     

Uniform PEO Star Polymers Synthesized in Water via Free Radical Polymerization or Atom Transfer Radical Polymerization

Amphiphilic star shaped polymers with poly(ethylene oxide) (PEO) arms and cross‐linked hydrophobic core were synthesized in water via either conventional free radical polymerization (FRP) or atom transfer radical polymerization (ATRP) techniques using a simple “arm‐first” method. In FRP, PEO based macromonomers (MM) were used as arm precursors, which were then cross‐linked by divinylbenzene (DVB) using 2,2′‐azoisobutyronitrile (AIBN). Uniform star polymers ( < 1.2) were achieved through adjustment of the ratio of PEO MM, DVB, and AIBN. While in case of ATRP, both PEO MM, and PEO based macroinitiator (MI) were used as arm precursors with ethylene glycol diacrylate as cross‐linker. Even more uniform star polymers with less contamination by low MW polymers were obtained, as compared to the products synthesized by FRP.

     

Preparation of Robust Poly(ε‐caprolactone) Hollow Spheres with Controlled Biodegradability

Summary: This work reports a new type of poly(ε‐caprolactone) (PCL) robust hollow sphere with controllable biodegradability, produced by grafting PCL shells from the surface of silica sphere cores and removing the template cores. Bis(ε‐caprolactone‐4‐yl) (BCY) composed of two ε‐caprolactone molecules was used as the crosslinker, which not only greatly strengthened the PCL hollow spheres but also brought hardly any non‐biodegradable component into the system. Solubility experiments and biodegradation tests show that the crosslinked PCL hollow spheres were robust both in water and acetone, and were completely biodegradable with characteristics of controllable biodegradability according to the content of the BCY. The Rhodamine release test indicated that the release rate of encapsulated drugs in the PCL hollow spheres was controlled by diffusion and the biodegradability of the PCL molecules, and the latter mechanism will dominate when more enzymes are involved.

Reaction scheme for synthesis of linear and crosslinked hollow poly(ε‐caprolactone) spheres.     

Transport of Guest Molecules by Unimolecular Micelles Evidenced in Analytical Ultracentrifugation Experiments

The ability of star‐shaped, block copolymer‐based unimolecular micelles to encapsulate and transport guest molecules was studied. Analytical ultracentrifugation studies clearly showed that methyl‐orange guest molecules could be encapsulated and transported, together with unimolecular micelles consisting of 5‐arm, star‐shaped block copolymers with a poly(ethylene glycol) core and a poly(ε‐caprolactone) corona. Sedimentation‐velocity and equilibrium measurements were performed to determine the sedimentation coefficients, molar masses, and diffusion coefficients of the loaded, unimolecular micelles. It was observed that the transport of guest molecules by unimolecular micelles was a function of the molecular weight of the star‐shaped block copolymers and therefore also of their size.

     

Acid‐Cleavable Unimolecular Micelles from Amphiphilic Star Copolymers for Triggered Release of Anticancer Drugs

In this contribution, amphiphilic star copolymers (H40‐star‐PCL‐a‐PEG) with an H40 hyperbranched polyester core and poly(ε‐caprolactone)‐a‐poly(ethylene glycol) copolymer arms linked with acetal groups are synthesized using ring‐opening polymerization and a copper (I)‐catalyzed alkyne‐azide cycloaddition click reaction. The acid‐cleavable acetal groups between the hydrophilic and hydrophobic segments of the arms endow the amphiphilic star copolymers with pH responsiveness. In aqueous solution, unimolecular micelles can be formed with good stability and a unique acid degradability, as is desirable for anticancer drug carriers. For the model drug of doxorubicin, the in vitro release behavior, intracellular release, and inhibition of proliferation of HeLa cells show that the acid‐cleavable unimolecular micelles with anticancer activity can be dissociated in an acidic environment and efficiently internalized by HeLa cells. Due to the acid‐cleavable and biodegradable nature, unimolecular micelles from amphiphilic star copolymers are promising for applications in intracellular drug delivery for cancer chemotherapy.

     

Design of Heterocomplementary H‐Bonding RAFT Agents – Towards the Generation of Supramolecular Star Polymers

Supramolecular poly(vinyl acetate) PVAc 3‐arms stars were successfully generated by Reversible Addition–Fragmentation chain Transfer (RAFT)‐polymerized chains bearing hydrogen‐bonding heterocomplementary associating units. Chain Transfer Agents (CTA) bearing thymine‐ and diaminopyridine‐based units were first synthesized and proved to mediate efficiently the polymerization of VAc. The binding ability of the chains in solution was then demonstrated by ¹H NMR and GPC measurements, proving the formation of the supramolecular stars.

     

Enzyme‐Catalyzed Preparation of Aliphatic Polyesters Containing Thioester Linkages

Aliphatic polyesters containing thioester linkages were enzymatically prepared by both the copolymerization of lactone with mercaptoalkanoic acid and by the transesterification of polyesters with mercaptoalkanoic acids. The enzymatic copolymerization of ε‐caprolactone with 11‐mercaptoundecanoic acid (11MU) and 3‐mercaptopropionic acid (3MP) was performed under reduced pressure using an immobilized lipase from Candida antarctica (CA). The transesterification of poly(ε‐caprolactone) and poly[(R)‐3‐hydroxybutyrate] was carried out with 11MU and 3MP using lipase CA under reduced pressure.

     

Enhanced Templating in the Crystallisation of Poly(ε‐caprolactone) Using 1,3:2,4‐di(4‐Chlorobenzylidene) Sorbitol

We show that small quantities of 1,3:2,4‐di(4‐chlorobenzylidene) sorbitol dispersed in poly(ε‐caprolactone) provide a very effective self‐assembling nanoscale framework which, with a flow field, yields extremely high levels of polymer crystal orientation. During modest shear flow of the polymer melt, the additive forms highly extended nano‐particles which adopt a preferred alignment with respect to the flow field. On cooling, polymer crystallisation is directed by these particles. This chloro substituted dibenzylidene sorbitol is considerably more effective at directing the crystal growth of poly(ε‐caprolactone) than the unsubstituted compound.

     

Porous Biodegradable Scaffold: Predetermined Porosity by Dissolution of Poly(ester‐anhydride) Fibers from Polyester Matrix

A novel selective leaching method for the porogenization of the biodegradable scaffolds was developed. Continuous, predetermined pore structure was prepared by dissolving fast eroding poly(ε‐caprolactone)‐based poly(ester‐anhydride) fibers from the photo‐crosslinked poly(ε‐caprolactone) matrix. The porogen fibers dissolved in the phosphate buffer (pH 7.4, 37 °C) within a week, resulting in the porosity that replicated exactly the single fiber dimensions and the overall arrangement of the fibers. The amount of the porosity, estimated with micro‐CT, corresponded with the initial amount of the fibers. The potential to include bioactive agents in the porogen fibers was demonstrated with the bioactive glass.

     

Spatioselective Modification of Bicompartmental Polymer Particles and Fibers via Huisgen 1,3‐Dipolar Cycloaddition

Precise nano‐ and microscale control of the architecture of biodegradable biomaterials is desirable for several biotechnological applications such as drug delivery, diagnostics, and medical imaging. Herein, we combine electrohydrodynamic co‐jetting and highly specific surface modification (via Huisgen 1,3‐dipolar cycloaddition) to prepare particles and fibers with spatioselective surface modification. We first prepared biphasic particles and fibers from commercial poly(lactide‐co‐glycolide) copolymers via electrohydrodynamic co‐jetting of two organic solutions loaded with fluorescent macromolecules and acetylene‐modified PLGA derivatives. (i) Spatially controlled reaction of poly[lactide‐co‐(propargyl glycolide)] with O‐(2‐aminoethyl)‐O′‐(2‐azidoethyl)heptaethylene glycol and (ii) subsequent conversion of the newly introduced amino groups with fluorescence probes resulted in particles and fibers with surface modification of one hemisphere only.

     

Microwave‐Assisted Ring‐Opening Polymerization of ε‐Caprolactone in the Presence of Ionic Liquid

Summary: Microwave‐assisted ring‐opening polymerization of ε‐caprolactone in the presence of 1‐butyl‐3‐methylimidazolium tetrafluoroborate ionic liquid using zinc oxide as a catalyst is investigated. By adding 30 wt.‐% ionic liquid, poly(ε‐caprolactone) with a weight‐average molar mass of 28 500 g · mol⁻¹ is obtained at 85 W for 30 min. The results indicate that the polymerization could be efficiently enhanced in the presence of ionic liquids under microwave irradiation because ionic liquids can effectively absorb microwave energy.

     

Synthesis of a Multi Alternating‐Arm‐Containing Dendritic Star Copolymer by RAFT and Cationic Ring‐Opening Polymerization

A new dendritic heteroarm star copolymer that contains multi‐alternating arms of poly(ethylene oxide‐tetrahydrofuran) (P(EO‐THF)) and poly(methyl methacrylate) (PMMA) on a dendritic polyester core has been synthesized by a ‘core‐first’ approach by combination of sequential cationic ring‐opening polymerization (CROP) and reversible addition–fragmentation transfer (RAFT) polymerization initiated by a dendritic macroinitiator ( 3 ) capped with multi‐alternating terminal carboxylic acid groups (used directly to initiate the ROP of THF in the presence of EO as a polymerization promoter to attain P(EO‐THF) arms) and dithiobenzoate groups (used to initiate RAFT polymerization of MMA to attain PMMA arms). The structures of the products were confirmed by NMR spectroscopy, GPC‐MALLS, and DSC measurements.

     

The Self‐Assembled Structure of the Diblock Copolymer PCL‐b‐P4VP Transforms Upon Competitive Interactions with Octaphenol Polyhedral Oligomeric Silsesquioxane

This paper describes the miscibility and self‐assembly, mediated by hydrogen‐bonding interactions, of new block copolymer/nanoparticle blends. The morphologies adopted by the immiscible poly[(ε‐caprolactone)‐block‐(4‐vinyl pyridine)] (PCL‐b‐P4VP) diblock copolymer changes upon increasing the number of competitive hydrogen‐bonding interactions after adding increasing amounts of octaphenol polyhedral oligomeric silsesquioxane (OP‐POSS). Transmission electron microscopy reveals morphologies that exhibit high degrees of long‐range order, such as cylindrical and spherical structures, at relatively low OP‐POSS contents, and short‐range order or disordered structures at higher OP‐POSS contents. Analyses performed using differential scanning calorimetry, wide‐angle X‐ray diffraction, and FT‐IR spectroscopy provide positive evidence that the pyridyl units of the P4VP block are significantly stronger hydrogen‐bond acceptors toward the OH group of OP‐POSS than are the CO groups of the PCL block, thereby resulting in excluded and confined PCL phases.

     

L,L‐Lactide and ε‐Caprolactone Block Copolymers by a ‘Poly(L,L‐lactide) Block First’ Route

L,L ‐lactide (LA) and ε‐caprolactone (CL) block copolymers have been prepared by initiating the poly(ε‐caprolactone) (PCL) block growth with living poly(L,L ‐lactide) (PLA*). In the previous attempts to prepare block copolymers this way only random copolyesters were obtained because the PLA* + CL cross‐propagation rate was lower than that of the PLA–CL* + PLA transesterification. The present paper shows that application of Al‐alkoxide active centers that bear bulky diphenolate ligands results in efficient suppression of the transesterification. Thus, the corresponding well‐defined di‐ and triblock copolymers could be prepared.

     

Micelles Formed by Cylindrical Brush‐Coil Block Copolymers

Summary: Amphiphilic cylindrical brush‐coil block copolymers consisting of a polystyrene coil and a cylindrical brush block with poly(acrylic acid) side chains are prepared by ATRP of t‐butylacrylate from a block comacroinitiator. Upon acidolysis of the poly(t‐butylacrylate), water‐soluble polymers were obtained that were observed to form micelles consisting of 4–5 block copolymers on average in aqueous solution. The star‐like nature of such micelles was clearly visualized by scanning force microscopy.

Schematic of coil‐cylindrical brush block copolymer PS‐b‐(PⁱBEMA‐g‐PAA), its AFM image clearly showing the main chain and the PAA corona of the cylindrical brush block.     

New Strategy for Controlling Biodegradability of Biodegradable Polyesters by Enzyme‐Catalyzed Surface Grafting

A novel preparation method for the core‐shell type biodegradable polyesters or biodegradable materials grafted with biodegradable polyesters was developed by alkaline surface treatment of biodegradable polyester films and subsequent enzymatic polymerization of aliphatic lactones, one example of which is shown in this study, i.e., the preparation of poly(L ‐lactide) (PLLA) film grafted with poly(ε‐caprolactone). It is revealed that only alkaline surface treatment or the combination of alkaline surface treatment and enzyme‐catalyzed grafting, the former and the latter, respectively accelerating and delaying the enzymatic degradation of PLLA, will give PLLA materials having a wide variety of biodegradability. Also, the specificity of the enzyme used for hydrolysis could be used to confirm the grafted chain species.