Synthesis,characterization, corrosion inhibition of mild steel in HCl (0.5 N) solution and solid‐state electrical conductivity of new Co(II), Ni(II), Cu(II) and Zn(II) complexes

This work consists of a study of the corrosion‐inhibiting and semiconducting properties of new binuclear Co(II), Ni(II), Cu(II) and Zn(II) complexes with a Schiff base, H₂L, obtained from the 2:1 M condensation of salicylaldehyde and o‐dianisidine, respectively. Elemental, spectral and thermal analyses were used to characterize these complexes. The magnetic susceptibilities of these complexes were also determined. Weight loss, potentiodynamic polarization and scanning optical microscopy were the techniques used to investigate the efficiency of these new compounds as corrosion inhibitors. The antibacterial activity of the compounds was measured against sulfate‐reducing bacteria. It was found that inhibition occurs via the chemisorption of metal complexes on the steel surface. This absorption obeys the Langmuir adsorption isotherm model.     

Effectiveness of 2‐mercaptobenzothiazole, 8‐hydroxyquinoline and benzotriazole as corrosion inhibitors on AA 2024‐T3 assessed by electrochemical methods

In this study, the effectiveness of 2‐mercaptobenzothiazole (2‐MBT), 8‐hydroxyquinoline and benzotriazole as corrosion inhibitors for AA 2024‐T3 aluminium alloy was evaluated. The corrosion behaviour in the presence of each compound was investigated by image‐assisted electrochemical noise analysis, electrochemical impedance spectroscopy, potentiodynamic polarization and the split cell technique. It was found that 2‐MBT has superior inhibition properties compared with the other inhibitors. In particular, the specimens immersed in 3.5% NaCl in the presence of 2‐MBT displayed high values of noise resistance that were maintained for over 400 h of testing, and high values of low‐frequency impedance, measured after immersion for 24 h. The split cell technique and potentiodynamic polarization tests indicated that only 2‐MBT decreases significantly both the anodic and the cathodic reaction rates. Scanning electron microscopy observations and energy dispersive X‐ray measurements complement the findings from electrochemical measurements indicating that only 2‐MBT protects the second phase particles, preventing dealloying, trenching and initiation of corrosion. © 2015 The Authors. Surface and Interface Analysis published by John Wiley & Sons Ltd.     

Anti‐corrosion properties of bis(benzimidazole) derivatives for N80 steel in H2S solution

In this work, we systematically investigated the effect of four bis(benzimidazole) derivatives containing different heteroatoms in molecular structures on inhibiting corrosion of N80 steel in 0.5 mmol·l^?1 H₂S solution by potentiodynamic polarization, electrochemical impedance spectroscopy and metallographic microscope. The results showed that within the range of 0.1–1.0 mmol·l^?1, the adsorption of bis(benzimidazole) derivatives on N80 steel surface was found to follow Langmuir adsorption isotherm. Meanwhile, stable adsorbing monolayer between inhibitors and the metal surface was formed, which was confirmed by thermodynamic adsorption parameters (K_ads, ). This series of bis(benzimidazole) derivatives exhibited obvious corrosion inhibitory properties for N80 steel. Moreover, they could both slow down the anodic dissolution of iron and the cathodic reduction reaction as mixed type corrosion inhibitors. The optimal inhibition efficiency was obtained for 1,3‐bis(benzimidazl‐2‐yl)‐2‐thiapropane (BBMS). Hopefully, this series of inhibitors might find applications in anti‐corrosion and many other areas. Copyright © 2012 John Wiley & Sons, Ltd.     

Benign‐by‐Design Solventless Mechanochemical Synthesis of Three‐, Two‐, and One‐Dimensional Hybrid Perovskites

Organic–inorganic hybrid perovskites have attracted significant attention owing to their extraordinary optoelectronic properties with applications in the fields of solar energy, lighting, photodetectors, and lasers. The rational design of these hybrid materials is a key factor in the optimization of their performance in perovskite‐based devices. Herein, a mechanochemical approach is proposed as a highly efficient, simple, and reproducible method for the preparation of four types of hybrid perovskites, which were obtained in large amounts as polycrystalline powders with high purity and excellent optoelectronics properties. Two archetypal three‐dimensional (3D) perovskites (MAPbI₃ and FAPbI₃) were synthesized, together with a bidimensional (2D) perovskite (Gua₂PbI₄) and a “double‐chain” one‐dimensional (1D) perovskite (GuaPbI₃), whose structure was elucidated by X‐ray diffraction.     

Corrosion inhibition and performance evaluation on 2,5‐diaryl‐1,3,4‐thiadiazole and its derivatives

Using electrochemical impedance spectroscopy (EIS) and scanning electronic microscopy (SEM), this paper evaluated the inhibition effect of four 2,5‐diaryl‐1,3,4‐thiadiazole and its derivatives named 2,5‐diphenly‐1,3,4‐thiadiazole (DPTD), 2,5‐di(2‐hydroxyphenly)‐1,3,4‐thiadiazole (2‐DHPTD), 2,5‐di(3‐hydroxyphenly)‐1,3,4‐thiadiazole (3‐DHPTD), and 2,5‐di(4‐hydroxyphenly)‐1,3,4‐thiadiazole (4‐DHPTD) on silver strip corrosion in 50 mg/l sulfur–ethanol solution under room temperature. The experiments indicated that the inhibition efficiency increased with increasing inhibitor concentrations, and the increasing order was (4‐DHPDT) > (3‐DHPDT) > (2‐DHPDT) > (DPDT). Quantum chemical calculation was applied to correlate inhibition performances with their electronic structural parameters of thiadiazole derivatives. Molecular dynamics simulations (DFT) were used to optimize the equilibrium configurations of the inhibitor molecules on the silver surface and to investigate the molecular structure effect on the corrosion inhibition efficiency. The efficiency order of the investigated inhibitors, which was obtained by experimental results, was verified by theoretical calculations. Contact angle (CA) analysis was also carried out, and finally confirmed the existence of the adsorbed film which prevailed in addition of thiadiazole derivatives. CA analysis indicated that the film of n‐DHPTD (n = 2,3,4) was hydrophilic, owing to two hydroxyl groups in their molecular. The adsorption of these compounds onto silver strip from 50 mg/l S‐ethanol system obeys Langmuir adsorption isotherm, and it belongs to mixed‐type adsorption mainly dominated by chemisorption. Copyright © 2016 John Wiley & Sons, Ltd.     

Development of completely bio‐based epoxy networks derived from epoxidized linseed and castor oil cured with citric acid

Bio‐based epoxy resins were synthesized from nonedible resources like linseed oil and castor oil. Both the oils were epoxidized through in situ method and characterized via Fourier transform infrared and ¹H‐NMR. These epoxidized oils were crosslinked with citric acid without using any catalyst and their properties compared with diglycidyl ether of bisphenol A‐epoxy. The tensile strength and modulus of epoxidized linseed oil (ELO) were found to be more than those of epoxidized castor oil (ECO)‐based network. However, elongation at break of ECO was significantly higher than that of both ELO and epoxy, which reveals its improved flexibility and toughened nature. Thermogravimetric analysis revealed that the thermal degradation of ELO‐based network is similar to that of petro‐based epoxy. Dynamic mechanical analysis revealed moderate storage modulus and broader loss tangent curve of bio‐based epoxies confirming superior damping properties. Bioepoxies exhibit nearly similar contact angle as epoxy and display good chemical resistant. The preparation method does not involve the use of any toxic catalyst and more hazardous solvents, thus being eco‐friendly.     

Synthesis of poly(quinoxaline‐2,3‐diyl)s with alkoxy side chains by aromatizing polymerization of 4,5‐dialkoxy‐substituted 1,2‐ diisocyanobenzenes

Poly(quinoxaline‐2,3‐diyl)s bearing alkoxy pendants was synthesized by living polymerization of 4,5‐dialkoxy‐3,6‐dimethyl‐1,2‐diisocyanobenzenes, which were easily accessible from 3,6‐dimethylcatechol, using organonickel complexes as initiators. Thermal properties of the obtained polymers were fully determined by thermogravimetric analysis and differential scanning calorimetry, exhibiting strong dependence on their side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and evaluation of polyisobutylene‐based imido‐amine‐type dispersants containing exclusively non‐nucleophilic nitrogen

Lubricating oils for gasoline and diesel engines are formulated to include amphiphilic dispersants for soot particle stabilization and prevention of particle aggregation. Primary and secondary amines used within the polar group of traditional dispersants provide basic nitrogen, which is able to neutralize acidic by‐products from combustion and does not contribute to sulfated ash. However, these active‐hydrogen‐containing amines present significant problems for fluoroelastomer seals and metals in terms of degradation and corrosion. Polyisobutylene (PIB)‐based dispersants containing only tertiary amines, intended to remediate these problems, were synthesized from primary‐bromide‐terminated PIB, 1‐(2‐aminoethyl)piperazine, and an anhydride such as phthalic anhydride. Intermediates and final dispersant molecules were characterized by NMR, GPC, TGA, and MALDI‐TOF MS. Using Langmuir adsorption studies with carbon black as a surrogate for soot, a direct dependence on the affinity for adsorption of the dispersant with respect to the number of phenyl rings present was identified. Performance testing revealed increased compatibility of the dispersants, including limited degradation of seals and corrosion of metals, while retaining total base number. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1657–1675     

Effect of comonomer on thermal/mechanical and shape memory property of L‐lactide‐based shape‐memory copolymers

In this study, three kinds of L ‐lactide‐based copolymers, poly(lactide‐co‐glycolide) (PLGA), poly(lactide‐co‐p‐dioxanone) (PLDON) and poly(lactide‐co‐caprolactone) (PLC), were synthesized by the copolymerization of L ‐lactide (L) with glycolide (G), or p‐dioxanone (DON) or ε‐caprolactone (CL), respectively. The copolymers were easily soluble in common organic solvents. The compositions of the copolymers were determined by ¹H‐NMR. Thermal/mechanical and shape‐memory properties of the copolymers with different comonomers were compared. Moreover, the effect of the chain flexibility of the comonomers on thermal/mechanical and shape‐memory properties of the copolymers were investigated. The copolymers with appropriate lactyl content showed good shape‐memory properties where both the shape fixity rate (R_f)and the shape recovery rate (R_r) could exceed 95%. It was found that the comonomers with different flexible molecular chain have different effects on their thermal/mechanical and shape‐memory properties. Among them, PLGA has the highest mechanical strength and recovery rate while PLC copolymer has high recovery rate when the lactyl content exceeded 85% and the lowest transition temperature (T_trans). Copyright © 2007 John Wiley & Sons, Ltd.     

Magnetically Recoverable Efficient Demulsifier for Water‐in‐Oil Emulsions

A magnetically recoverable and efficient demulsifier is shown to demulsify surfactant‐stable water‐in‐oil emulsions rapidly. Ferroferric oxide (Fe₃O₄) particles are firstly coated by amorphous silicon dioxide (SiO₂), and further functionalized with a commercial dodecyltrimethoxysilane solution (KH‐1231). Owing to their paramagnetic properties, the demulsifier particles can be easily recovered with a magnet. Upon addition of demulsifier to emulsions and subsequent sonification, the supernatant becomes completely transparent and no droplets are observed in the micrographs. It was also demonstrated that this demulsifier is effective for emulsions prepared with a variety of oils. Moreover, magnetically recovered demulsifier can be recycled after simple treatment without any decline of efficiency. This work presents a feasible approach for demulsifying water‐in‐oil emulsions, and has potential value in industry.     

Ionic‐liquid‐based ultrasound‐assisted extraction of isoflavones from Belamcanda chinensis and subsequent screening and isolation of potential α‐glucosidase inhibitors by ultrafiltration and semipreparative high‐performance liquid chromatography

The separation of a compound of interest from its structurally similar homologues to produce high‐purity natural products is a challenging problem. This work proposes a novel method for the separation of iristectorigenin A from its structurally similar homologues by ionic‐liquid‐based ultrasound‐assisted extraction and the subsequent screening and isolation of potential α‐glucosidase inhibitors via ultrafiltration and semipreparative high‐performance liquid chromatography. Ionic‐liquid‐based ultrasound‐assisted extraction was successfully applied to the extraction of tectorigenin, iristectorigenin A, irigenin, and irisflorentin from Belamcanda chinensis . The optimum conditions for the efficient extraction of isoflavones were determined as 1.0 M 1‐ethyl‐3‐methylimidazolium tetrafluoroborate with extraction time of 30 min and a solvent to solid ratio of 30 mL/g. Ultrafiltration with liquid chromatography and mass spectrometry was applied to screen and identify α‐glucosidase inhibitors from B. chinensis , followed by the application of semipreparative high‐performance liquid chromatography to separate and isolate the active constituents. Four major compounds including tectorigenin, iristectorigenin A, irigenin, and irisflorentin were screened and identified as α‐glucosidase inhibitors, and then the four active compounds abovementioned were subsequently isolated by semipreparative high‐performance liquid chromatography (99.89, 88.97, 99.79, and 99.97% purity, respectively). The results demonstrate that ionic liquid extraction can be successfully applied to the extraction of isoflavones from B. chinensis .     

Synthesis of a One‐dimensional Coordination Polymer Based on Copper(II) Nitrate and 1,2‐Bis(5‐monomethylhydrazinyl‐1H‐tetrazolyl)ethane

A one‐dimensional coordination polymer based on copper(II) nitrate and 1,2‐bis(5‐monomethylhydrazinyl‐1H‐tetrazolyl)ethane as ligand was prepared. The thermal and physical stability was determined by differential scanning calorimetry and BAM methods. The polymer was investigated by vibrational spectroscopy and single X‐ray diffraction. Moreover, the ligand itself and the 1,2‐bis(1H‐tetrazolyl)ethane were characterized as energetic material by bomb calorimetric measurements along with calculations using the EXPLO5 software. Both compounds have moderate energetic properties along with a high thermal and physical stability. These findings render these compounds into promising environment friendly gas generating agents.     

Formation of α‐SF5‐Enolate Enables Preparation of 3‐SF5‐Quinolin‐2‐ones, 3‐SF5‐Quinolines,and 3‐SF5‐Pyridin‐2‐ones: Evaluation of their Physicochemical Properties

This study describes, for the first time, the generation of a SF₅‐substituted ester enolate from benzyl SF₅‐acetate under soft enolization conditions, which in turn participates in aldol addition reactions in high yield. The reaction was applied in the synthesis of 3‐SF₅‐quinolin‐2‐ones, 3‐SF₅‐quinolines, and 3‐SF₅‐pyridin‐2‐ones, none of which have previously been reported. To provide guidelines for their use in drug discovery, the physicochemical properties of these building blocks were determined and compared with those of their CF₃‐ and t‐Bu‐analogues.     

Indole‐3‐acetic acid and N‐acetyltryptophan corrosion inhibition effects on mild steel in 1 M hydrochloric acid solution

Corrosion inhibition of indole‐3‐acetic acid and N‐acetyl tryptophan on carbon steel was investigated using polarization and electrochemical impedance spectroscopy (EIS). Polarization results revealed that corrosion inhibitors could reduce the rate of cathodic and anodic reactions on metal surface. EIS analysis showed inhibition efficiency of indoles increases by increasing the inhibitor concentration. The maximum inhibition efficiency was 97% and 80% in solutions containing 10 mM indole‐3‐acetic acid and 10 mM N‐acetyl tryptophan, respectively. The adsorption of inhibitors was found to follow Langmuir isotherm. Adsorption and film formation of inhibitors on the metal substrate were confirmed by calculating thermodynamic adsorption parameter (ΔG⁰_ads) and characterization of exposed metals' surface through contact angle measurements. Copyright © 2014 John Wiley & Sons, Ltd.     

Energetic Materials with Promising Properties: Synthesis and Characterization of 4,4′‐Bis(5‐nitro‐1,2,3‐2H‐triazole) Derivatives

Using a variety of functionalization strategies, derivatives of 4, 4′‐bis(5‐nitro‐1,2,3‐2H‐triazole) were designed, synthesized, and characterized. The isomers were separated, their structures were confirmed with single‐crystal X‐ray analysis, and their properties were determined by differential scanning calorimetry, density, impact sensitivity, heat of formation, and detonation velocity and pressure (calculated by EXPLO5 V6.01). Those materials were found to exhibit superior detonation performance when compared with the other fully carbon‐nitrated bis(azoles).     

DFT study of the physicochemical characteristics and spectral behavior of new 8‐substituted 1,3,7‐trimethylxanthines

Nine biologically active theophylline derivatives were investigated using quantum chemical methods (density functional theory level). All calculations were performed at B3LYP/6‐31G** level of theory. The electrostatic potential charges, highest occupied molecular orbital (HOMO)/lowest unoccupied molecular orbital (LUMO) gap, dipole moment, vibration frequencies, and electronic spectra were calculated. Log P was determined by Ghose‐Crippen method. All of the compounds under study are polar and negatively charged, which is necessary for their interaction with the receptors/enzymes. Majority of the compounds are lipophilic and they can easily diffuse through the cell membrane. The observed differences between the calculated and the experimental vibration frequencies in the Fourier Transform Infrared Spectroscopy (FTIR) spectra are established to be mainly in NH and OH bands, due to hydrogen bonds formation. The discrepancies between theoretical and experimental electronic spectra may be due to vibration effects and H‐bonding with the solvent molecules. The obtained results show that this type of spectrum is formed mainly by the xanthine fragment of the molecule, especially in the fingerprint region. All calculated properties could be useful for future qualitative‐structure activity relationship (QSAR) analysis. © 2012 Wiley Periodicals, Inc.     

Synthesis and characterization of novel fluorinated aromatic polyimides derived from 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane and various aromatic dianhydrides

A novel fluorinated aromatic diamine, 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane (9FMA), was synthesized by the coupling reaction of 3′,5′‐ditrifluoromethyl‐2,2,2‐trifluoroacetophenone with 2,6‐dimethylaniline under the catalysis of 2,6‐dimethylaniline hydrochloride. A series of fluorinated aromatic polyimides were synthesized from 9FMA and various aromatic dianhydrides, including pyromellitic dianhydride, 3,3′4,4′‐biphenyl tetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), and 4,4′‐hexafluoroisopropylidene diphthalic anhydride, via a high‐temperature, one‐stage imidization process. The inherent viscosities of the polyimides ranged from 0.37 to 0.74 dL/g. All the polyimides were quickly soluble in many low‐boiling‐point organic solvents such as tetrahydrofuran, chloroform, and acetone as well as some polar organic solvents such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, and N,N′‐dimethylformamide. Freestanding fluorinated polyimide films could be prepared and exhibited good thermal stability with glass‐transition temperatures of 298–334 °C and outstanding mechanical properties with tensile strengths of 69–102 MPa and elongations at break of 3.3–9.9%. Moreover, the polyimide films possessed low dielectric constants of 2.70–3.09 and low moisture absorption (<0.58%). The films also exhibited good optical transparency with a cutoff wavelength of 303–351 nm. One polyimide (9FMA/BTDA) also exhibited an intrinsic negative photosensitivity, and a fine pattern could be obtained with a resolution of 5 μm after exposure at the i‐line (365‐nm) wavelength. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2665–2674, 2006     

Synthesis,Dissociation Constants,and Some Pharmacological Properties of Schiff Base Hydrazones and their Cyclization to 1,3‐Thiazolidin‐4‐one Derivatives

This study presents the synthesis, dissociation constants, and pharmacological properties of Schiff base hydrazones. The derivatives were synthesized by the condensation reaction of carboxylic acid hydrazides containing 1,2,4‐triazole system with various aldehydes. The new derivatives of 1,3‐thiazolidin‐4‐one were prepared by the cyclization reaction of Schiff base hydrazones with the mercaptoacetic acid in the presence of 1,4‐dioxane. The structure of all obtained compounds was confirmed by means of ¹H NMR and ¹³C NMR spectra. The dissociation constants were determined using spectrophotometric method. The effects of four synthesized Schiff base hydrazones 6 , 7 , 11 and 12 on the central nervous system of mice in behavioral tests were examined.     

Near‐infrared spectroscopy and partial least squares‐class modeling (PLS‐CM) for metabolomics fingerprinting discrimination of intervention breakfasts ingested by obese individuals

Near‐infrared spectroscopy has been used in nutritional metabolomics fingerprinting for the assessment of the intake of intervention breakfasts prepared with four different vegetable oils that were previously subjected to a deep frying process of 20 cycles for 5 min at 180°C. The target oils were an extra virgin olive oil and three varieties of refined sunflower oil. Of the three latter, one of them was used as such, other was spiked with a synthetic oxidation inhibitor (dimethylsiloxane) and, finally, the last one was enriched with an extract of phenolic compounds from olive pomace, the antioxidant properties of which are well known. Urine sampled from individuals before intake and 2 and 4 h after intake was directly analyzed by NIRS to obtain fingerprint characteristics of the metabolome composition. The resulting urinary patterns were combined for statistical analysis by unsupervised and supervised approaches. Partial least squares‐class modeling enabled to develop class‐models for each intervention breakfast, thus achieving discrimination of urinary fingerprints from individuals after breakfast intake. The models were statistically characterized by estimation of sensitivity and specificity parameters for the training and evaluation (validation) steps. The application of variable importance in projection algorithm enabled to detect the spectral regions with higher significance to explain the variability observed in the partial least squares class‐models. Quantitative differences of variable importance in projection scores discriminated among the different classes under study. Copyright © 2013 John Wiley & Sons, Ltd.     

Copolymerization of fluorene‐based main‐chain benzoxazine and their high performance thermosets

A series of fluorene‐based benzoxazine copolymers were synthesized from the mixture of 9,9‐bis(4‐hydroxyphenyl)fluorene and bisphenol A, and 4,4′‐diaminodiphenyloxide and paraformaldehyde. And the cured polybenzoxazine films derived from these copolymers were also obtained. Fourier transform infrared spectroscopy (FTIR) and hydrogen nuclear magnetic resonances confirmed the structure of these benzoxazines. Their molecular weight was estimated by gel permeation chromatography. The curing behavior of the precursors was monitored by FTIR and differential scanning calorimetry. Dynamic mechanical analysis and thermogravimetric analysis were performed to study the thermal properties of the cured polymers. The cured polybenzoxazines exhibit excellent heat resistance with glass transition temperatures (T_g) of 286–317°C, good thermal stability along with the values of 5% weight loss temperatures (T₅) over 340°C, and high char yield over 50% at 800°C. The mechanical properties of the cured polymers were also measured by bending tests. Copyright © 2015 John Wiley & Sons, Ltd.