Gold‐Nanoparticle‐Loaded Carbonate‐Modified Titanium(IV) Oxide Surface: Visible‐Light‐Driven Formation of Hydrogen Peroxide from Oxygen

Gold nanoparticle‐loaded rutile TiO₂ with a bimodal size distribution around 10.6 nm and 2.3 nm (BM‐Au/TiO₂) was prepared by the deposition precipitation and chemical reduction (DP‐CR) technique. Visible‐light irradiation (λ>430 nm) of the BM‐Au/TiO₂ plasmonic photocatalyst yields 35 μm H₂O₂ in aerated pure water at irradiation time (t_p)=1 h, and the H₂O₂ concentration increases to 640±60 μm by the addition of 4 % HCOOH as a sacrificing electron donor. Further, a carbonate‐modified surface BM‐Au/TiO₂ (BM‐Au/TiO₂‐CO₃^2?) generates a millimolar level of H₂O₂ at t_p=1 h with a quantum efficiency (Φ) of 5.4 % at λ=530 nm under the same conditions. The recycle experiments confirmed the stable performance of BM‐Au/TiO₂.     

N21,N22‐carbonyl‐bridged biliverdin. red‐blue color change effected by conformation

An N₂₁,N₂₂‐carbonyl‐bridged mesobiliverdin, prepared in high yield by reaction of the unbridged parent (λ_max 639 nm, ? 15,700, chloroform) with 1,1′‐carbonyldiimidazole and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene, gave magenta‐colored solutions in chloroform that absorb strongly in the visible spectrum (λ_max 534 nm, ? 27,700) and shifted to bright blue (λ_max 669 nm, ? 35,300) upon addition of trifluoroacetic acid.     

Vapour‐Phase Epitaxial Growth of Dual‐Colour‐Emitting DCM‐Perylene Micro‐Heterostructure Optical Waveguides

Organic micro‐heterostructures (MHS) with dual optical emissions are essential to produce miniaturized optical waveguides for wavelength division multiplexing technologies. The bimolecular MHS produced by solution‐based bottom‐up self‐assembly technique often leads to poor surface smoothness, edge imperfection, defects, and unwanted thin films deposits. Conversely, sequential sublimation technique at ambient pressure facilitates effective integration of α‐perylene micro‐square with dicyanomethylene‐2‐methyl‐6‐(p‐dimethylaminostyryl) 4H‐pyran (DCM) microrods in an epitaxial manner to produce MHS. The obtained DCM/perylene MHS act as optical waveguides to produce red (λ_max≈670 nm) or/and yellow (λ_max≈607 nm) dual optical outputs via an energy transfer mechanism depending upon the heterostructures geometry and optical excitation positions. The presented dual‐color emitting MHS optical waveguides are essential for the integrated nano‐photonic and optoelectronic device structures.     

Ab initio investigation of 2,2′‐bis(4‐trifluoromethylphenyl)‐5,5′‐bithiazole for the design of efficient organic field‐effect transistors

The initial molecular structure of 2,2′‐bis(4‐trifluoromethylphenyl)‐ 5,5′‐bithiazole has been optimized in the ground state using density functional theory (DFT). The distribution patterns of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) have also been evaluated. To shed light on the charge transfer properties, we have calculated the reorganization energy of electron λ_e, the reorganization energy of hole λ_h, adiabatic electron affinity (EA_a), vertical electron affinity (EA_v), adiabatic ionization potential (IP_a), and vertical ionization potential (IP_v) using DFT. Based on the evaluation of hole reorganization energy, λ_h, and electron reorganization energy, λ_e, it has been predicted that 2,2′‐bis(4‐trifluoromethylphenyl)‐5,5′‐bithiazole would be a better electron transport material. Finally, the effect of electric field on the HOMO, LUMO, and HOMO–LUMO gap were observed to check its suitability for the use as a conducting channel in organic field‐effect transistors. © 2015 Wiley Periodicals, Inc.     

Effect of Medium Acidity and Photostability of 3‐(4‐Dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP): A New Green Emitting Laser Dye

On the line of a previous work on the spectral properties of some of heteroaryl chalcone, the effect of medium acidity and photoreactivity of 3‐(4‐dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP) has been investigated in dimethylformamide and in chloromethane solvents such as methylenechloride, chloroform and carbon tetrachloride. The dye solution (ca. 5×10⁻⁴ mol·L⁻¹ in DMF) gives a good laser emission in the range 470–560 nm with emission maximum at 515 nm upon pumping by nitrogen laser (λ_ex=337.1 nm). The laser parameters such as gain coefficient (α), emission cross section (δ_e) and half life energy (E_1/2) at maximum laser emission are also determined.     

Solvatochromism,Reversible Chromism and Self‐Assembly Effects of Heteroatom‐Assisted Aggregation‐Induced Enhanced Emission (AIEE) Compounds

Two compounds, 9,10‐bis[2‐(quinolyl)vinyl]anthracene (BQVA) and 9,10‐bis[2‐(naphthalen‐2‐yl)vinyl]anthracene (BNVA), have been synthesised and investigated. Both of them have aggregation‐induced enhanced emission (AIEE) properties. Heteroatom‐assisted BQVA shows solvatochromism, reversible chromism properties and self‐assembly effects. When increasing the solvent polarities, the green solution of BQVA turns to orange with a redshift of the fluorescence emission wavelengths from λ=527 to 565 nm. Notably, BQVA exhibits reversible chromism properties, including mechano‐ and thermochromism. The as‐prepared BQVA powders show green fluorescence (λ_em=525 nm) and the colour can turn into orange (λ_em=573 nm) after grinding. Interestingly, the orange colour can return at high temperature. Based on these reversible chromism properties, a simple and convenient erasable board has been designed. Different from BQVA, non‐heteroatom‐assisted BNVA has no clear chromic processes. The results obtained from XRD, differential scanning calorimetry, single‐crystal analysis and theoretical calculations indicate that the chromic processes depend on the heteroatoms in BQVA. Additionally, BQVA also exhibits excellent self‐assembly effects in different solvents. Homogeneous nanospheres are formed in mixtures of tetrahydrofuran and water, which are then doped into silica nanoparticles and treated with 3‐aminopropyltriethoxysilane to give amino‐functionalised nanoparticles (BQVA?AFNPs). The BQVA?AFNPs could be used to stain protein markers in polyacrylamide gel electrophoresis.     

Host–Guest Recognition and Fluorescence of a Tetraphenylethene‐Based Octacationic Cage

We report the synthesis and characterization of a three‐dimensional tetraphenylethene‐based octacationic cage that shows host–guest recognition of polycyclic aromatic hydrocarbons (e.g. coronene) in organic media and water‐soluble dyes (e.g. sulforhodamine 101) in aqueous media through CH???π, π–π, and/or electrostatic interactions. The cage?coronene exhibits a cuboid internal cavity with a size of approximately 17.2×11.0×6.96 ų and a “hamburger”‐type host–guest complex, which is hierarchically stacked into 1D nanotubes and a 3D supramolecular framework. The free cage possesses a similar cavity in the crystalline state. Furthermore, a host–guest complex formed between the octacationic cage and sulforhodamine 101 had a higher absolute quantum yield (Φ_F=28.5 %), larger excitation–emission gap (Δλ_ex‐em=211 nm), and longer emission lifetime (τ=7.0 ns) as compared to the guest (Φ_F=10.5 %; Δλ_ex‐em=11 nm; τ=4.9 ns), and purer emission (Δλ_FWHM=38 nm) as compared to the host (Δλ_FWHM=111 nm).     

Coordination of nickel and copper dithiolate to 2,2′‐bipyridine‐based π‐conjugated polymers

π‐Conjugated polymers (Poly1–Poly3) containing a 2,2′‐bipyridine (bpy) unit were subjected to coordination to nickel and copper dithiolate for the purpose of manipulating the photophysical properties. The absorption maximum peak of Poly1 [maximum wavelength (λ_max) = 446 nm] redshifted by 36 nm upon the coordination of bpy to NiCl₂, which produced Poly1–NiCl₂. A further bathochromic shift was observed in the spectrum of Poly1–mntNi [mntNi = (maleonitrile dithiolate)nickel; λ_max = 499 nm] bearing the dithiolate ligand, which stemmed from the extension of the conjugated system over the nickel dithiolate moiety through the bpy unit. An increase in the [Ni]/[bpy] ratio in Poly1–mntNi rendered the original maximum peak at 446 nm smaller and the lower energy charge‐transfer peak at 499 nm larger; the isosbestic points remained at 380 and 475 nm. The green fluorescence (λ_max = 504 nm) emitted from Poly1 markedly diminished upon the coordination of nickel dithiolate because of the effective energy transfer. The absorption maximum peak of Poly1–mntNi in chloroform at 499 nm blueshifted to 471 nm when the volume ratio of the chloroform/N,N‐dimethylformamide solvent reached 10:90. The coordination of nickel dithiolate to Poly2 and Poly3 also brought about redshifts of the absorption maximum peaks of as much as 55 and 61 nm, respectively. The absorption maximum peak of Poly1–(phenyldithiolate)nickel(pdtNi) (λ_max = 474 nm) redshifted by 28 nm in comparison with that of Poly1, whereas the magnitude of the shift of Poly1–bis(thiophenoxide)nickel(btpNi) bearing two thiophenoxide ligands was 20 nm. Poly1–mntCu with a tetrahedral copper center was also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2631–2639, 2004     

Covalent Modification of MoS2 with Poly(N‐vinylcarbazole) for Solid‐State Broadband Optical Limiters

New soluble MoS₂ nanosheets covalently functionalized with poly(N‐vinylcarbazole) (MoS₂–PVK) were in situ synthesized for the first time. In contrast to MoS₂ and MoS₂/PVK blends, both the solution of MoS₂–PVK in DMF and MoS₂–PVK/poly(methyl methacrylate) (PMMA) film show superior nonlinear optical and optical limiting responses. The MoS₂–PVK/PMMA film shows the largest nonlinear coefficients (β_eff) of about 917 cm GW^?1 at λ=532 nm (cf. 100.69 cm GW^?1 for MoS₂/PMMA and 125.12 cm GW^?1 for MoS₂/PVK/PMMA) and about 461 cm GW^?1 at λ=1064 nm (cf. ?48.92 cm GW^?1 for MoS₂/PMMA and 147.56 cm GW^?1 for MoS₂/PVK/PMMA). A larger optical limiting effect, with thresholds of about 0.3 GW cm^?2 at λ=532 nm and about 0.5 GW cm^?2 at λ=1064 nm, was also achieved from the MoS₂–PVK/PMMA film. These values are among the highest reported for MoS₂‐based nonlinear optical materials. These results show that covalent functionalization of MoS₂ with polymers is an effective way to improve nonlinear optical responses for efficient optical limiting devices.     

Simultaneous determination of three banned psychiatric drugs in pig feed and tissue using solid‐phase reactor on‐line oxidizing and HPLC‐fluorescence detection

The banned addition of psychiatric drugs such as phenothiazines to animal feed and foodstuffs increases the risk of human organ lesion. Phenothiazines usually exhibit weak native fluorescence and can be oxidized to strongly fluorescent compounds. In this study, a novel, sensitive and convenient method of HPLC‐fluorescence detection based on post‐column on‐line oxidizing with lead dioxide solid‐phase reactor has been developed for simultaneous determination of three banned psychotropic drugs, promethazine, chlorpromazine and thioridazine. Three compounds were successfully separated on an Agilent TC‐C₁₈ column with mobile phase of acetonitrile (A) and water (B), both containing 0.5% (v/v) formic acid. A gradient elution was programmed and fluorimetric detection was performed at λ_ex/λ_em of 332/373 nm for promethazine, 340/380 nm for chlorpromazine and 352/432 nm for thioridazine. The calibration graphs gave good linearity over the concentration ranges of 30.0–4976.4 µg/L for promethazine, 2.0–2153.2 µg/L for chlorpromazine, and 15.0–3088.0 µg/L for thioridazine, and correlation coefficients (r) were ≥0.995. The method was applied to the determination of phenothiazines in pig feed and pig tissue, and the average spiked recoveries were in the range 69.1–115.4%. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of novel blue‐light‐emitting polypyridine

A new regioregular head‐to‐tail (HT)‐type polypyridine with methoxyethoxyethoxy (MEEO) side chains, HT‐PMEEOPy, was synthesized by means of Kumada‐Tamao coupling polymerization of a Grignard monomer with a Ni catalyst. Although the polymer was precipitated in THF during polymerization, multiangle laser light scattering (MALLS) analysis indicated that the weight‐average molecular weight (M_w) was about 25,000. The HT content in the polymer was 95%. A solution of HT‐PMEEOPy in CHCl₃ was found to emit a strong blue light when the solution was irradiated with UV light; the UV‐vis absorption maximum (λ_max) and photoluminescence maximum (λ_{max em}) were at 392 and 460 nm, respectively. To clarify the effect of regioregularity of PMEEOPy on the photoluminescence, head‐to‐head (HH) PMEEOPy was synthesized by means of Yamamoto coupling polymerization. The photoluminescence of HH‐PMEEOPy (λ_max = 330 nm, λ_{max em} = 414 nm) was weaker than that of HT‐PMEEOPy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Steric Demand and Rate‐determining Step for Photoenolization of Di‐ortho‐substituted Acetophenone Derivatives

Laser flash photolysis of ketone 1 in argon‐saturated methanol yields triplet biradical 1BR (τ = 63 ns) that intersystem crosses to form photoenols Z‐1P (λ_max = 350 nm, τ ~ 10 μs) and E‐1P (λ_max = 350 nm, τ > 6 ms). The activation barrier for Z‐1P re‐forming ketone 1 through a 1,5‐H shift was determined as 7.7 ± 0.3 kcal mol^?1. In contrast, for ketone 2, which has a less sterically hindered carbonyl moiety, laser flash photolysis in argon‐saturated methanol revealed the formation of biradical 2BR (λ_max = 330 nm, τ ~ 303 ns) that intersystem crosses to form photoenol E‐2P (λ_max = 350 nm, τ > 42 μs), but photoenol Z‐2P was not detected. However, in more viscous basic H‐bond acceptor (BHA) solvent, such as hexamethylphosphoramide, triplet 2BR intersystem crosses to form both Z‐2P (λ_max = 370 nm, τ ~ 1.5 μs) and E‐2P. Thus, laser flash photolysis of ketone 2 in methanol reveals that intersystem crossing from 2BR to form Z‐2P is slower than the 1,5‐H shift of Z‐2P, whereas in viscous BHA solvents, the 1,5‐H shift becomes slower than the intersystem crossing from 2BR to Z‐2P. Density functional theory and coupled cluster calculations were performed to support the reaction mechanisms for photoenolization of ketones 1 and 2 .     

FRET‐Based Mitochondria‐Targetable Dual‐Excitation Ratiometric Fluorescent Probe for Monitoring Hydrogen Sulfide in Living Cells

Hydrogen sulfide (H₂S) is connected with various physiological and pathological functions. However, understanding the important functions of H₂S remains challenging, in part because of the lack of tools for detecting endogenous H₂S. Herein, compounds Ratio‐H₂S 1/2 are the first FRET‐based mitochondrial‐targetable dual‐excitation ratiometric fluorescent probes for H₂S on the basis of H₂S‐promoted thiolysis of dinitrophenyl ether. With the enhancement of H₂S concentration, the excitation peak at λ≈402 nm of the phenolate form of the hydroxycoumarin unit drastically increases, whereas the excitation band centered at λ≈570 nm from rhodamine stays constant and can serve as a reference signal. Thus, the ratios of fluorescence intensities at λ=402 and 570 nm (I₄₀₂/I₅₇₀) exhibit a drastic change from 0.048 in the absence of H₂S to 0.36 in the presence of 180 μM H₂S; this is a 7.5‐fold variation in the excitation ratios. The favorable properties of the probe include the donor and acceptor excitation bands, which exhibit large excitation separations (up to 168 nm separation) and comparable excitation intensities, high sensitivity and selectivity, and function well at physiological pH. In addition, it is demonstrated that the probe can localize in the mitochondria and determine H₂S in living cells. It is expected that this strategy will lead to the development of a wide range of mitochondria‐targetable dual‐excitation ratiometric probes for other analytes with outstanding spectral features, including large separations between the excitation wavelengths and comparable excitation intensities.     

Luminescent Palladium(II) Complexes with π‐Extended Cyclometalated [RC^N^NR′] and Pentafluorophenylacetylide Ligands: Spectroscopic,Photophysical, and Photochemical Properties

A series of cyclometalated Pd^II complexes that contain π‐extended R? C^N^N? R′ (R? C^N^N? R′=3‐(6′‐aryl‐2′‐pyridinyl)isoquinoline) and chloride/pentafluorophenylacetylide ligands have been synthesized and their photophysical and photochemical properties examined. The complexes with the chloride ligand are emissive only in the solid state and in glassy solutions at 77 K, whereas the ones with the pentafluorophenylacetylide ligand show phosphorescence in the solid state (λ_max=584–632 nm) and in solution (λ_max=533–602 nm) at room temperature. Some of the complexes with the pentafluorophenylacetylide ligand show emission with λ_max at 585–602 nm upon an increase in the complex concentration in solutions. These Pd^II complexes can act as photosensitizers for the light‐induced aerobic oxidation of amines. In the presence of 0.1 mol % Pd^II complex, secondary amines can be oxidized to the corresponding imines with substrate conversions and product yields up to 100 and 99 %, respectively. In the presence of 0.15 mol % Pd^II complex, the oxidative cyanation of tertiary amines could be performed with product yields up to 91 %. The Pd^II complexes have also been used to sensitize photochemical hydrogen production with a three‐component system that comprises the Pd^II complex, [Co(dmgH)₂(py)Cl] (dmgH=dimethylglyoxime; py=pyridine), and triethanolamine, and a maximum turnover of hydrogen production of 175 in 4 h was achieved. The excited‐state electron‐transfer properties of the Pd^II complexes have been examined.     

Environment‐Sensitive Fluorophores with Benzothiadiazole and Benzoselenadiazole Structures as Candidate Components of a Fluorescent Polymeric Thermometer

An environment‐sensitive fluorophore can change its maximum emission wavelength (λ_em), fluorescence quantum yield (Φ_f), and fluorescence lifetime in response to the surrounding environment. We have developed two new intramolecular charge‐transfer‐type environment‐sensitive fluorophores, DBThD‐IA and DBSeD‐IA, in which the oxygen atom of a well‐established 2,1,3‐benzoxadiazole environment‐sensitive fluorophore, DBD‐IA, has been replaced by a sulfur and selenium atom, respectively. DBThD‐IA is highly fluorescent in n‐hexane (Φ_f=0.81, λ_em=537 nm) with excitation at 449 nm, but is almost nonfluorescent in water (Φ_f=0.037, λ_em=616 nm), similarly to DBD‐IA (Φ_f=0.91, λ_em=520 nm in n‐hexane; Φ_f=0.027, λ_em=616 nm in water). A similar variation in fluorescence properties was also observed for DBSeD‐IA (Φ_f=0.24, λ_em=591 nm in n‐hexane; Φ_f=0.0046, λ_em=672 nm in water). An intensive study of the solvent effects on the fluorescence properties of these fluorophores revealed that both the polarity of the environment and hydrogen bonding with solvent molecules accelerate the nonradiative relaxation of the excited fluorophores. Time‐resolved optoacoustic and phosphorescence measurements clarified that both intersystem crossing and internal conversion are involved in the nonradiative relaxation processes of DBThD‐IA and DBSeD‐IA. In addition, DBThD‐IA exhibits a 10‐fold higher photostability in aqueous solution than the original fluorophore DBD‐IA, which allowed us to create a new robust molecular nanogel thermometer for intracellular thermometry.     

Ratiometric Fluorescent Nanosensors for Copper(II) Based on Bis(rhodamine)‐Derived PMOs with J‐Type Aggregates

By using pentyl‐linked bis(rhodamine)‐derived tetra‐siloxane (PRh‐Si₄) as the organosilica precursor, highly ordered PRh‐bridged periodic mesoporous organosilicas (PRhPMOs) were prepared. When excited at λ=500 nm, the PRhPMO suspension that contained metal ions showed two separate emission peaks at λ=550 and 623 nm. The first peak, located at λ=550 nm, was due to ring‐opening of the spiro structure in the rhodamine moiety and the second, located at λ=623 nm, originated from fluorescent aggregates of the PRh units embedded in the silica framework of the PRhPMO. By using the different intensity ratios of the two fluorescence signals (FI_550/623), PRhPMOs could be used as turn‐ON type fluorescent ratiometric chemosensors for Cu²⁺. Furthermore, based on the single‐exciton theory, it was deduced that the fluorescent aggregates formed were of the J‐type and had a coplanar configuration. Consequently, PRhPMOs display a longer fluorescence lifetime and greater fluorescent quantum yield than the respective monomers dissolved in solution, which is consistent with the experimental results.     

Synthesis and properties of through‐space conjugated polymers based on cyano‐substituted poly(p‐arylenevinylene)s

New through‐space cyano‐substituted poly(p‐arylenevinylene)s containing a [2.2]paracyclophane unit were synthesized by the Knoevenagel reaction. Polymers 5 and 7 have cyano groups at α‐positions and β‐positions from the dialkoxyphenylene unit, respectively. Their optical and electrochemical behaviors were investigated in detail in comparison with their model compounds. Polymers 5 and 7 exhibited through‐space conjugation via the cyclophane units. Polymer 5 showed greenish blue emission (λ_max = 477 nm) in diluted solution with fluorescence quantum efficiency (?_F) of only 0.007, whereas polymer 7 emitted in the bluish green region (λ_max = 510 nm) with ?_F of 0.32. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5979–5988, 2009     

Synthesis and properties of conjugated copolycondensates consisting of carbazole‐2,7‐diyl and fluorene‐2,7‐diyl

Carbazole and fluorene‐based random and alternating copolycondensates were synthesized to develop high‐performance blue light‐emitting polymers by improving electron injection ability of poly(N‐aryl‐2,7‐carbazole)s that showed intense blue electroluminescence (EL) with good hole‐injection and ‐transport ability. These copolycondensates absorbed light energy at about λ_max = 390 nm in CHCl₃ and 400 nm in film state, and fluoresced at about λ_max = 417 nm in CHCl₃ and 430 nm in the thin film state. Energy gaps between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of them were about 2.9 eV, and the energy levels of LUMO situated lower than that of corresponding polycarbazole. Polymer light‐emitting diode devices having configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)/polymer/CsF/Al using the copolycondensates, poly(N‐arylcarbazole‐2,7‐diyl), and poly(9,9‐dialkylfluorene‐2,7‐diyl), emitted bluish EL at operating voltages lower than 7 V. The device embedded the random copolycondensate showed notably higher performance with maximum luminance of 31,200 cd m^?2 at 11.0 V, and the current efficiencies observed under operating voltages lower than 7 V were higher than those of the other devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Light‐Regulated Polymerization under Near‐Infrared/Far‐Red Irradiation Catalyzed by Bacteriochlorophyll a

Photoregulated polymerizations are typically conducted using high‐energy (UV and blue) light, which may lead to undesired side reactions. Furthermore, as the penetration of visible light is rather limited, the range of applications with such wavelengths is likewise limited. We herein report the first living radical polymerization that can be activated and deactivated by irradiation with near‐infrared (NIR) and far‐red light. Bacteriochlorophyll a (Bachl a) was employed as a photoredox catalyst for photoinduced electron transfer/reversible addition–fragmentation chain transfer (PET‐RAFT) polymerization. Well‐defined polymers were thus synthesized within a few hours under NIR (λ=850 nm) and far‐red (λ=780 nm) irradiation with excellent control over the molecular weight (M_n/M_w<1.25). Taking advantage of the good penetration of NIR light, we showed that the polymerization also proceeded smoothly when a translucent barrier was placed between light source and reaction vessel.     

3‐aryl‐6‐methoxy‐2‐oxo‐1,2‐dihydroquinoline‐4‐carbonitriles as Solvent and pH Independent Green Fluorescent Dyes

Highly fluorescent and stable 3‐aryl‐6‐methoxy‐2‐oxoquinoline‐4‐carbonitriles 6 (λ_exc = 408 nm and λ_em = 510 nm) were synthesized starting from appropriate arylmalonates 2 . Ring closure reaction with p‐anisidine gave 4‐hydroxyquinolones 3 , which could be bis‐chlorinated to yield quinolines 4 . Regioselective hydrolysis produced reactive 4‐chloroquinolones 5 , which were converted to green fluorescent 4‐cyano quinolones 6 using toluenesulfinates as catalysts.