Evidence for Degradation of the Chrome Yellows in Van Gogh’s Sunflowers: A Study Using Noninvasive In Situ Methods and Synchrotron‐Radiation‐Based X‐ray Techniques

This paper presents firm evidence for the chemical alteration of chrome yellow pigments in Van Gogh’s Sunflowers (Van Gogh Museum, Amsterdam). Noninvasive in situ spectroscopic analysis at several spots on the painting, combined with synchrotron‐radiation‐based X‐ray investigations of two microsamples, revealed the presence of different types of chrome yellow used by Van Gogh, including the lightfast PbCrO₄ and the sulfur‐rich PbCr_1?xS_xO₄ (x≈0.5) variety that is known for its high propensity to undergo photoinduced reduction. The products of this degradation process, i.e., Cr^III compounds, were found at the interface between the paint and the varnish. Selected locations of the painting with the highest risk of color modification by chemical deterioration of chrome yellow are identified, thus calling for careful monitoring in the future.     

Kupferkomplexe des neuen Chelatliganden 1‐Methyl‐2‐(2‐thiophenolato)‐1H‐benzimidazol (mtpb) und dessen Oxidationsprodukten

Copper Complexes of the New Chelate Ligand 1‐Methyl‐2‐(2‐thiophenolato)‐1H‐benzimidazole (mtpb) and of its Oxidation Products Anodic electrolysis of copper in acetonitrile in the presence of Hmtpb leads to formation of yellow [Cu₄(mtbp)₄] which was crystallized as a dichloromethane solvate with two crystallographically independent cluster molecules in the unit cell. The copper(I) atoms exhibit slightly pyramidal S₂N coordination with bridging thiolate sulfur atoms. The two clusters contain the four copper atoms arranged in a more (Cu1‐Cu4) or less (Cu5‐Cu8) distorted bisphenoidal arrangement. Reaction of mtpb^— with Cu(ClO₄)₂ under anoxic conditions also produces [Cu₄(mtpb)₄]. However, the admittance of O₂ in the reaction of mtpb^— with copper(II) acetate in methanol causes oxidation of the sulfur atoms; a square‐pyramidal configurated copper(II) complex [Cu(CH₃CO₂‐κ²O)(L₁‐κN)(L₂‐κN, O)] has been isolated and crystallographically characterized in which L₁ is the neutral sulfinic methyl ester and L₂^— is the sulfonate derived from mtpb^—.     

Long‐Life Room‐Temperature Sodium–Sulfur Batteries by Virtue of Transition‐Metal‐Nanocluster–Sulfur Interactions

Room‐temperature sodium–sulfur (RT‐Na/S) batteries hold significant promise for large‐scale application because of low cost of both sodium and sulfur. However, the dissolution of polysulfides into the electrolyte limits practical application. Now, the design and testing of a new class of sulfur hosts as transition‐metal (Fe, Cu, and Ni) nanoclusters (ca. 1.2 nm) wreathed on hollow carbon nanospheres (S@M‐HC) for RT‐Na/S batteries is reported. A chemical couple between the metal nanoclusters and sulfur is hypothesized to assist in immobilization of sulfur and to enhance conductivity and activity. S@Fe‐HC exhibited an unprecedented reversible capacity of 394 mAh g^?1 despite 1000 cycles at 100 mA g^?1, together with a rate capability of 220 mAh g^?1 at a high current density of 5 A g^?1. DFT calculations underscore that these metal nanoclusters serve as electrocatalysts to rapidly reduce Na₂S₄ into short‐chain sulfides and thereby obviate the shuttle effect.     

A Carbon‐Sulfur Hybrid with Pomegranate‐like Structure for Lithium‐Sulfur Batteries

A carbon‐sulfur hybrid with pomegranate‐like core–shell structure, which demonstrates a high rate performance and relatively high cyclic stability, is obtained through carbonization of a carbon precursor in the presence of a sulfur precursor (FeS₂) and a following oxidation of FeS₂ to sulfur by HNO₃. Such a structure effectively protects the sulfur and leaves enough buffer space after Fe³⁺ removal and, at the same time, has an interconnected conductive network. The capacity of the obtained hybrid is 450 mA h g^?1 under the current density of 5 C. This work provides a simple strategy to design and prepare various high‐performance carbon‐sulfur hybrids for lithium‐sulfur batteries.     

Synthesis and characterization of the new ambidentate O‐cholesteryl‐O‐phenyl phosphorothioate ligand and its organoarsenic derivatives of phenoxarsin‐10‐yl and phenothiarsin‐10‐yl phosphorothioate

A new anionic phosphorothioate ligand that incorporates the bioactive cholesteryl group was obtained ( 2 ), Na(RR′P(S)O; R, O‐phenyl; R′, O‐cholesteryl) from the phenylphosphoramidate ( 1 ) and NaH in dioxane. In order to test the coordination ability of 2, two organoarsenic derivatives were prepared, O(C₆H₄)₂AsS(O)PRR′ ( 3 ) and S(C₆H₄)₂AsS(O)PRR′ ( 4 ) by reacting 2 with 10‐chlorophenoxarsine or 10‐chlorophenothiarsine. Compounds 2, 3 , and 4 were characterized by elemental microanalysis, IR, multi‐element NMR (¹H, ¹³C, and ³¹P), and mass spectrometry. The spectroscopic data suggest that the ligand is bonded to the arsenic only through the sulfur donor atom in both organoarsenic derivatives. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:6–10, 2000     

Symmetrical Bis‐Phosphorus Compounds and Macrocycles with two 1,3,2‐Benzodiazaphosphorinone Units – Oxidation and X‐Ray Structure Analysis of Selected Compounds

The hydrolysis of 1,2‐bis(5,6‐benzo‐1‐methyl‐2‐chloro‐1,3,2‐diazaphosphorin‐4‐on‐3‐yl)ethane ( 1 ) and its 1,3‐propane derivative ( 2 ) with excess water led, without decomposition, to the formation of the bis‐phosphoryl compounds 3 and 4 . Reaction of 1 and 2 with bis(trimethylsiloxy)ethane formed the symmetrical macrocycles 5 and 6 , which could readily be oxidized by (H₂N)₂C(:O) · H₂O₂ or elemental sulfur, leading to the formation of the phosphoryl compounds 7 and 10 , and the thiophosphoryl derivatives 9 and 11 , respectively. The influence of the ring size on the reaction rate of the oxidation was investigated. For the sulfurization of 6 , the stepwise addition of sulfur to phosphorus was proved by NMR spectroscopy. All compounds exist as single conformers in common organic solvents such as toluene, diethyl ether, dichloromethane or chloroform. For compounds 7 (dichloromethane solvate) and 9 , single crystal X‐ray structure analyses were conducted; both diastereomeric molecules were shown to display RR/SS configuration. In both structures one short non‐classical hydrogen bond was observed.     

Abnormal Anti‐Quenching and Controllable Multi‐Transitions of Bi3+ Luminescence by Temperature in a Yellow‐Emitting LuVO4:Bi3+ Phosphor for UV‐Converted White LEDs

Phosphors with an efficient yellow‐emitting color play a crucial role in phosphor‐converted white LEDs (pc‐WLEDs), but popular yellow phosphors such as YAG:Ce or Eu²⁺‐doped (oxy)nitrides cannot smoothly meet this seemingly simple requirement due to their strong absorptions in the visible range. Herein, we report a novel yellow‐emitting LuVO₄:Bi³⁺ phosphor that can solve this shortcoming. The emission from LuVO₄:Bi³⁺ shows a peak at 576 nm with a quantum efficiency (QE) of up to 68 %, good resistance to thermal quenching (T_{50 %}=573 K), and no severe thermal degradation after heating–cooling cycles upon UV excitation. The yellow emission, as verified by X‐ray photoelectron spectra (XPS), originates from the (³P₀,³P₁)→¹S₀ transitions of Bi³⁺. Increasing the temperature from 10 to 300 K produces a temperature‐dependent energy‐transfer process between VO₄^3? groups and Bi³⁺, and further heating of the samples to 573 K intensifies the emission. However, it subsequently weakens, accompanied by blueshifts of the emission peaks. This abnormal anti‐thermal quenching can be ascribed to temperature‐dependent energy transfer from VO₄^3? groups to Bi³⁺, a population redistribution between the excited states of ³P₀ and ³P₁ upon thermal stimulation, and discharge of electrons trapped in defects with a trap depth of 359 K. Device fabrication with the as‐prepared phosphor LuVO₄:Bi³⁺ has proved that it can act as a good yellow phosphor for pc‐WLEDs.     

Random poly(fluorenylene‐vinylene)s containing 3,7‐Dibenzothiophene‐5,5‐dioxide units: Synthesis,photophysical, and electroluminescence properties

The synthesis of new random poly(arylene‐vinylene)s containing the electron withdrawing 3,7‐dibenzothiophene‐5,5‐dioxide unit was achieved by the Suzuki–Heck cascade polymerization reaction. The properties of poly[9,9‐bis(2‐ethylhexyl)‐2,7‐fluorenylene‐vinylene‐co‐3,7‐dibenzothiophene‐5,5‐dioxide‐vinylene] (50/50 mol/mol, P1 ) and poly[1,4‐bis(2‐ethylhexyloxy)‐2,5‐phenylene‐vinylene‐co‐3,7‐dibenzothiophene‐5,5‐dioxide‐vinylene] (50/50 mol/mol, P2 ) were compared with those of terpolymers obtained by combining the fluorene, dibenzothiophene, and 1,4‐bis(2‐ethylexyloxy)benzene in 20/40/40 ( P3 ), 50/25/25 ( P4 ), and 80/10/10 ( P5 ) molar ratios. The polymers were characterized by ¹H NMR and IR, whereas their thermal properties were investigated by TGA and DSC. Polymers P1–5 are blue–green emitters in solution (λ_em between 481 and 521 nm) whereas a profound red shift observed in the solid state is emission (λ_em from 578 to 608 nm) that can be attributed both to the charge transfer stabilization exerted by the polar medium and to intermolecular interactions occurring in the solid state. Cyclic voltammetry permitted the evaluation of the ionization potentials and also revealed a quasi‐reversible behavior in the reduction scans for the polymers ( P1–4 ) containing the higher amounts of 3,7‐dibenzothiophene‐5,5‐dioxide units. Electroluminescent devices with both ITO/PEDOT‐PSS/ P1–5 /Ca/Al (Type I) and ITO/PEDOT‐PSS/ P1–5 /Alq₃/Ca/Al (Type II) configuration were fabricated showing a yellow to yellow–green emission. In the case of P4 , a luminance of 1835 cd/m² and an efficiency of 0.25 cd/A at 14 V were obtained for the Type II devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2093–2104, 2009     

A Facile Synthesis of High‐Surface‐Area Sulfur–Carbon Composites for Li/S Batteries

Small‐grained elemental sulfur is precipitated from sodium thiosulfate (Na₂S₂O₃) in a carbon‐containing oxalic acid (HOOC?COOH) solution through a novel spray precipitation method. Surface area analysis, elemental mapping, and transmission electron micrographs revealed that the spray‐precipitated sulfur particles feature 11 times higher surface area compared to conventional precipitated sulfur, with homogeneous distribution in the carbon. Moreover, the scanning electron micrographs show that these high‐surface‐area sulfur particles are firmly adhered to and covered by carbon. This precipitated S–C composite exhibits high discharge capacity with about 75 % capacity retention. The initial discharge capacity was further improved to 1444 mA h g^?1 by inserting a free‐standing single‐walled carbon nanotube layer in between the cathode and the separator. Moreover, with the help of the fixed capacity charging technique, 91.6 % capacity retention was achieved.     

A Green Synthesis of 2‐Amino‐4‐(9H‐carbazole‐3‐yl)thiophene‐3‐carbonitriles by a Step‐wise and One‐pot Three‐component Gewald Reaction

An eco‐friendly method has been developed for the synthesis of 2‐amino‐4‐(9H‐carbazole‐3‐yl)thiophene‐3‐carbonitriles from preliminary carbazole ( 1 ) through an intermediate of 2‐(1‐(9H‐carbazole‐3‐yl)ethylidene)malononitriles using the Knoevenagel condensation followed by the Gewald reaction. On the other hand, the target compounds could also be prepared in a one‐pot three‐component manner by treating equimolar quantities of 1‐(9H‐carbazole‐3‐yl)ethanone ( 3 ), malononitrile, and elemental sulfur. The merits of this preparation are mild reaction conditions. The Gewald reaction is executed with inorganic base NaHCO₃ (H₂O) in tetrahydrofuran, easy work‐up procedure with good yields.     

A Coordination Polymer from HAMTTO with Silver(I) (HAMTTO = 4‐Amino‐6‐methyl‐1,2,4‐triazine‐3‐thione‐5‐one)

The reaction of 4‐amino‐6‐methyl‐1,2,4‐triazine‐3‐thione‐5‐one, HAMTTO, with silver (I) nitrate in methanol led under deprotonation to the polymeric compound [(AMTTO)Ag]_n. The coordination polymer {[Ag(HAMTTO)]ClO₄}_n ( 1 ) is synthesized from the reaction of the latter polymeric compound with perchloric acid. Both compounds were characterized by elemental analysis and IR spectroscopy. Single‐crystal X‐ray diffraction studies on compound 1 showed that HAMTTO acts as a bidentate ligand and chelates the silver atom via its hydrazine nitrogen atom and its sulfur atom. Crystal data for 1 at ?90 °C: space group P2₁, Z = 2, a = 629.3(1), b = 748.7(1), c = 1071.7(1) pm, β = 98.28(1)°, R₁ = 0.0533.     

Greenish‐yellow‐, yellow‐, and orange‐light‐emitting iridium(III) polypyridyl complexes with poly(ε‐caprolactone)–bipyridine macroligands

A set of novel greenish‐yellow‐, yellow‐, and orange‐light‐emitting polymeric iridium(III) complexes were synthesized with the bridge‐splitting method. The respective dimeric precursor complexes, [Ir(ppy)₂‐μ‐Cl]₂ (ppy = 2‐phenylpyridine) and [Ir(ppy? CHO)₂‐μ‐Cl]₂ [ppy? CHO = 4‐(2‐pyridyl)benzaldehyde], were coordinated to 2,2′‐bipyridine carrying poly(ε‐caprolactone) tails. The resulting emissive polymers were characterized with one‐dimensional (¹H) and two‐dimensional (¹H? ¹H correlation spectroscopy) nuclear magnetic resonance and infrared spectroscopy, gel permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and the successful coordination of the iridium(III) centers to the 2,2′‐bipyridine macroligand was revealed. The thermal behavior was studied with differential scanning calorimetry and correlated with atomic force microscopy. Furthermore, the quantitative coordination was verified by both the photophysical and electrochemical properties of the mononuclear iridium(III) compounds. The photoluminescence spectra showed strong emissions at 535 and 570 nm. The color shifts depended on the substituents of the cyclometallating ligands. Cyclic voltammetry gave oxidation potentials of 1.23 V and 1.46 V. Upon the excitation of the films at 365 nm, yellow light was observed, and this could allow potential applications in light‐emitting devices. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2765–2776, 2005     

Novel Nucleophilic Substitution Reactions of 5‐Halo‐4‐Sulfur‐Substituted 5,6‐Dihydro‐2‐Pyridones

The title compounds ( 3 , 8 , 9 and 10 ) were efficiently synthesized, and their substitution reactions with various nucleophiles were carried out. The effects of leaving group, sulfur‐substituent, solvent, reaction temperature, and the nature of the nucleophiles on the reactivity and S_N2/S_N2′ regioselectivity were studied and rationalized with semi‐empirical calculations.     

Er2S[SiO4]: Ein Erbiumsulfid‐ortho‐Oxosilicat mit ungewöhnlicher Sulfidionen‐Koordination

During the reaction of cadmium sulfide with erbium and sulfur in evacuated silica ampoules pink lath‐shaped crystals of Er₂S[SiO₄] occur as by‐product which were characterized by X‐ray single crystal structure analysis. The title compound crystallizes orthorhombically in the space group Cmce (a = 1070.02(8), b = 1235.48(9), c = 683.64(6) pm) with eight formula units per unit cell. Besides isolated ortho‐oxosilicate units [SiO₄]^4?, the crystal structure contains two crystallographically independent Er³⁺ cations which are both eightfold coordinated by six oxygen and two sulfur atoms. The sulfide anions are surrounded by four erbium cations each in the shape of very distorted tetrahedra. These excentric [SEr₄]¹⁰⁺ tetrahedra build up layers according to by vertex‐ and edge‐connection. They are piled parallel to (010) and separated by the isolated ortho‐oxosilicate tetrahedra.     

Metal‐induced B–H Activation. Addition of Methyl Acetylene Carboxylates to Cp*Rh‐ and Cp*Ir 16 e Halfsandwich Complexes containing a Chelating 1,2‐Dicarba‐closo‐dodecaborane‐1,2‐diselenolato Ligand

Reactions of the 16e halfsandwich complexes Cp*M[Se₂C₂(B₁₀H₁₀)] ( 5 M = Rh, 6 M = Ir) with both methyl acetylene monocarboxylate and dimethyl acetylene dicarboxylate were studied in order to obtain information on the influence of the chalcogen (selenium versus sulfur), as well as further evidence for B–H activation, ortho‐metalation and substitution of the carborane. In the case of the rhodium‐selenium complex 5 , the reaction with methyl acetylene monocarboxylate gave products which were all structurally different compared to those of the sulfur analogue of 5 : a polycyclic derivative 12 with a B(6)‐substituted carborane cage was obtained as one of the final products; in addition, both geometrical isomers containing a Rh–B bond ( 10 , 11 ) and isomers without a Rh–B bond ( 8 , 9 ) were isolated, the latter being the result of twofold insertion into one of the Rh–Se bonds. In the case of the iridium‐selenium complex 6 , the reaction with methyl acetylene monocarboxylate led to the geometrical isomers 13 and 14 (similar to 10 and 11 ) with structures possessing an Ir–B bond. Both 5 and 6 reacted with dimethyl acetylene dicarboxylate at room temperature to give the complexes 15 and 16 which are formed by addition of the C≡C unit to the metal center and insertion into one of the metal‐selenium bonds. The proposed structures in solution were deduced from NMR data (¹H, ¹¹B, ¹³C, ⁷⁷Se, ¹⁰³Rh NMR), and an X‐ray structural analysis was carried out for the rhodium complex 12 .     

Isolable Boron Persulfide: Activation of Elemental Sulfur with a 2‐Chloro‐Azaborolyl Anion

The novel boron persulfide 2 LB(η²‐S₂) (L=[ArNC(R)CHC(R)]^?; Ar=2,6‐Me₂C₆H₃, R=tBu) was obtained by the reaction of the 2‐chloro‐azaborolyl anion 1 (LBCl)K(THF) with 0.25 equiv of elemental sulfur (S₈). Persulfide 2 is labile in solution and could be converted to the cyclic tetrasulfide LBS₄ ( 3 ) and hexasulfide LBS₆ ( 4 ) in the presence of sulfur at room temperature and 50 °C, respectively. Desulfination of 2 with triphenylphosphine resulted in the formation of the thioxoborane LB=S ( 5) . Alternatively, 3 and 4 could be obtained by the reaction of 1 with an excess of sulfur. Structural analysis of 2 disclosed the relatively long S?S bond of 2.1004(8) Å due to the lone‐pair repulsions of the two sulfur atoms, as disclosed by DFT calculations.     

Syntheses,and Crystal Structures of Indium Complexes with η2‐Piperidinyldithiocarbamate and η2‐Pyridine‐2‐Thionate Containing Ligands: Structures of [In(η2‐S2CNC5H10)3] and [In(η2‐pyS)3]

The η²‐thio‐indium complexes [In(η²‐thio)₃] (thio = S₂CNC₅H₁₀, 2 ; SNC₄H₄, (pyridine‐2‐thionate, pyS, 3 ) and [In(η²‐pyS)₂(η²‐acac)], 4 , (acac: acetylacetonate) are prepared by reacting the tris(η²‐acac)indium complex [In(η²‐acac)₃], 1 with HS₂CNC₅H₁₀, pySH, and pySH with ratios of 1:3, 1:3, and 1:2 in dichloromethane at room temperature, respectively. All of these complexes are identified by spectroscopic methods and complexes 2 and 3 are determined by single‐crystal X‐ray diffraction. Crystal data for 2 : space group, C2/c with a = 13.5489(8) Å, b = 12.1821(7) Å, c = 16.0893(10) Å, β = 101.654(1)°, V = 2600.9(3) ų, and Z = 4. The structure was refined to R = 0.033 and Rw = 0.086; Crystal data for 3 : space group, P2₁ with a = 8.8064 (6) Å, b = 11.7047 (8) Å, c = 9.4046 (7) Å, β = 114.78 (1)°, V = 880.13(11) ų, and Z = 2. The structure was refined to R = 0.030 and Rw = 0.061. The geometry around the metal atom of the two complexes is a trigonal prismatic coordination. The piperidinyldithiocarbamate and pyridine‐2‐thionate ligands, respectively, coordinate to the indium metal center through the two sulfur atoms and one sulfur and one nitrogen atoms, respectively. The short C‐N bond length in the range of 1.322(4)–1.381(6) Å in 2 and C‐S bond length in the range of 1.715(2)–1.753(6) Å in 2 and 3 , respectively, indicate considerable partial double bond character.     

Syntheses and Characterizations of Two Palladium(II) Complexes of 5‐Mercapto‐1‐methyltetrazole

Reaction of PdCl₂(CH₃CN)₂ with the sodium salt of 5‐mercapto‐1‐methyltetrazole (MetzSNa) in methanol solution affords an interesting dinuclear palladium complex [Pd₂(MetzS)₄ ] ( 1 ). However, treatment of PdCl₂(CH₃CN)₂ with neutral MetzSH ligand in methanol solution produces a mononuclear palladium complex [Pd(MetzSH)₄]Cl₂ ( 2 ). Both complexes were characterized by IR, ¹HNMR, UV‐Vis spectroscopy as well as X‐ray crystallography. Single‐crystal X‐ray diffraction analyses of two complexes lead to the elucidation of the structures and show that 1 possesses an asymmetric structure: one Pd atom is tetracoordinated by three sulfur atoms and one nitrogen atom to form PdS₃N coordination sphere, the other Pd atom is tetracoordinated by three nitrogen atoms and one sulfur atom to form PdSN₃ coordination sphere. The molecules of 1 are associated to 1‐D infinite linear chain by weak intermolecular Pd···S contacts in the crystal lattice. In 2 , the Pd atom lies on an inversion center and has a square‐planar coordination involving the S atoms from four MetzSH ligands. The two chloride ions are not involved in coordination, but are engaged in hydrogen bonding.     

Reversible Photothermal Isomerization of Carborane‐Fused Azaborole to Borirane: Synthesis and Reactivity of Carbene‐Stabilized Carborane‐Fused Borirane

A fully reversible photothermal isomerization between carborane‐fused trigonal‐planar azaborole (dark‐purple) and tetrahedral borirane (pale‐yellow) has been observed, leading to the isolation and structural characterization of the first example of carborane‐fused borirane. DFT calculations indicate that the azaborole is thermodynamically more stable than the borirane by 11.2 kcal mol⁻¹, and the energy barrier for the thermal conversion from azaborole to borirane is 35.5 kcal mol⁻¹. The reactivity studies show that the B−C(cage) bond in borirane can be broken in the reaction with CuCl, HCl, or elemental sulfur.     

Substituent Effect on the Competition between Hetero‐Diels‐Alder and Cheletropic Additions of Sulfur Dioxide to 1‐Substituted Buta‐1,3‐dienes

The reactivity of sulfur dioxide toward variously substituted butadienes was explored in an effort to define the factors affecting the competition between the hetero‐Diels‐Alder and cheletropic additions. At low temperature (<−70°), 1‐alkyl‐substituted 1,3‐dienes 1 that can adopt s‐cis‐conformations add to SO₂ in the hetero‐Diels‐Alder mode in the presence of CF₃COOH as promoter. In the case of (E)‐1‐ethylidene‐2‐methylidenecyclohexane ((E)‐ 4a ), the [4+2] cycloaddition of SO₂ is fast at −90° without acid catalyst. (E)‐1‐(Acyloxy)buta‐1,3‐dienes (E)‐ 1c , (E)‐ 1y , and (E)‐ 1z with AcO, BzO, and naphthalene‐2‐(carbonyloxy) substituents, respectively also undergo the hetero‐Diels‐Alder addition with SO₂+CF₃COOH at low temperatures, giving a 1 : 10 mixture of the corresponding cis‐ and trans‐6‐(acyloxy)sultines c‐ 2c,y,z and t‐ 2c,y,z , respectively). Above −50°, the sultines undergo complete cycloreversion to the corresponding dienes and SO₂, which that add in the cheletropic mode at higher temperature to give the corresponding 2‐substituted sulfolenes (=2,5‐dihydrothiophene 1,1‐dioxides) 3 . The hetero‐Diels‐Alder additions of SO₂ follow the Alder endo rule, giving first the 6‐substituted cis‐sultines that equilibrate then with the more stable trans‐isomers. This statement is based on the assumption that the S=O group in the sultine prefers a pseudo‐axial rather than a pseudo‐equatorial position, as predicted by quantum calculations. The most striking observation is that electron‐rich dienes such as 1‐cyclopropyl‐, 1‐phenyl‐, 1‐(4‐methoxyphenyl)‐, 1‐(trimethylsilyl)‐, 1‐phenoxy‐, 1‐(4‐chlorophenoxy)‐, 1‐(4‐methoxyphenoxy)‐, 1‐(4‐nitrophenoxy)‐, 1‐(naphthalen‐2‐yloxy)‐, 1‐(methylthio)‐, 1‐(phenylthio)‐, 1‐[(4‐chlorophenyl)thio]‐, 1‐[(4‐methoxyphenyl)thio]‐, 1‐[(4‐nitrophenyl)thio]‐, and 1‐(phenylseleno)buta‐1,3‐diene, as well as 1‐(methoxymethylidene)‐2‐methylidenecyclohexane ( 4f ) do not equilibrate with the corresponding sultines between −100 and −10°, in the presence of a large excess of SO₂, with or without acidic promoter. The hetero‐Diels‐Alder additions of SO₂ to 1‐substituted (E)‐buta‐1,3‐dienes are highly regioselective, giving exclusively the corresponding 6‐substituted sultines. The 1‐substituted (Z)‐buta‐1,3‐dienes do not undergo the hetero‐Diels‐Alder additions with sulfur dioxide.