Synthesis of Folic Acid Functionalized PLLA‐b‐PPEGMA Nanoparticles for Cancer Cell Targeting

Poly(L ‐lactic acid)‐block‐poly(poly(ethylene glycol) monomethacrylate) (PLLA‐b‐PPEGMA) has been prepared by the ring‐opening polymerization of lactide with a double‐headed initiator, 2‐hydroxyethyl 2′‐methyl‐2′‐bromopropionate (HMBP), followed by atom transfer radical polymerization (ATRP) of poly(ethylene glycol) monomethacrylate (PEGMA). PLLA‐b‐PPEGMA nanoparticles with encapsulated Fe₃O₄ are prepared by a solvent evaporation/extraction technique, and then further functionalized with folic acid, a cancer targeting ligand. Our results show that such functionalized PLLA‐b‐PPEGMA nanoparticles have good potential as carriers for targeted drug delivery in cancer treatment.

     

Synthesis and Characterization of Chitosan Grafted Oligo(L‐lactic acid)

Chitosan grafted oligo(L ‐lactic acid) copolymers with different length of side chain were prepared through the reaction of terminal aldehyde group of oligo(L ‐lactic acid) (OLLA) and amino groups of chitosan. The mean molecular mass of the grafting OLLA chain was ca. 600 ～ 5 000. The graft copolymers are soluble in DMSO, DMF and acetic acid. The synthesis method and structure described here provide chitosan‐g‐OLLA copolymers with broad applicability.

Structure of chitosan‐g‐oligo(L ‐lactic acid).     

L,L‐Lactide and ε‐Caprolactone Block Copolymers by a ‘Poly(L,L‐lactide) Block First’ Route

L,L ‐lactide (LA) and ε‐caprolactone (CL) block copolymers have been prepared by initiating the poly(ε‐caprolactone) (PCL) block growth with living poly(L,L ‐lactide) (PLA*). In the previous attempts to prepare block copolymers this way only random copolyesters were obtained because the PLA* + CL cross‐propagation rate was lower than that of the PLA–CL* + PLA transesterification. The present paper shows that application of Al‐alkoxide active centers that bear bulky diphenolate ligands results in efficient suppression of the transesterification. Thus, the corresponding well‐defined di‐ and triblock copolymers could be prepared.

     

Preparation of 5‐Fluorouracil‐Poly(L‐lactide) Microparticles Using Solution‐Enhanced Dispersion by Supercritical CO2

Summary: 5‐Fluorouracil‐poly(L ‐lactide) (5‐Fu‐PLLA) microparticles have been prepared by an SEDS process. First, the 5‐Fu is successfully micronized and is then used to produce the 5‐Fu‐PLLA microparticles. The 5‐Fu‐PLLA microparticles synthesized by the SEDS process exhibit a rather spherical shape and a narrow particle size distribution, where it ranges from 615 to 1 990 nm, with a mean particle size of 980 nm. The dichloromethane residue in the 5‐Fu‐PLLA microparticles without any further treatment is 46 ppm. The average drug load and encapsulation efficiency of the 5‐Fu‐PLLA microparticles are 3.05 and 17.8%, respectively. The rate of drug release from the 5‐Fu‐PLLA microparticles shows mainly first‐order kinetics.

Scanning electron spectroscopy image of 5‐Fu‐PLLA microparticles.     

Novel Anti‐Microbial Host‐Guest Complexes Based on Cationic β‐Cyclodextrin Polymers and Triclosan/Butylparaben

The preparation of novel cationic β‐cyclodextrin polymers (CPβCDs) and its complexes with butylparaben and triclosan were reported in this paper. FT‐IR and two‐dimensional (2D) ¹H–¹H gradient correlated spectroscopy (gCOSY) NMR spectra confirmed that the antibiotics could be included inside the lipophilic cavities of CPβCDs. The water solubility of the antibiotics was improved significantly after inclusion with CPβCDs. The results also suggest that it was easier for butylparaben, which had relatively small molecular size, to form the complexes with CPβCDs than triclosan. Due to the targeting effect after the inclusion with cationic CPβCDs, the anti‐microbial activity of butylparaben was also enhanced substantially. However, similar improvement was not obvious for triclosan.

     

Novel pH‐ and Temperature‐Responsive Block Copolymers with Tunable pH‐Responsive Range

A series of novel pH‐ and temperature‐responsive diblock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly[(L ‐glutamic acid)‐co‐(γ‐benzyl L ‐glutamate)] [P(GA‐co‐BLG)] were prepared. The influence of hydrophobic benzyl groups on the phase transition of the copolymers was studied for the first time. With increasing BLG content in P(GA‐co‐BLG) block, the thermal phase transition of the diblock copolymer became sharper at a designated pH and the critical curve of phase diagram of the diblock copolymer shifted to a higher pH region. Notably, when the BLG content in P(GA‐co‐BLG) block was more than 30 mol.‐%, the diblock copolymer responded sharply to a narrow pH change in the region of pH 7.4–5.5.

     

Synthesis and Characterization of a Block Copolymer Containing Regioregular Poly(3‐hexylthiophene) and Poly(γ‐benzyl‐L‐glutamate)

Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.

     

Fabrication of Poly(L‐lactide)‐block‐Poly(ethylene glycol)‐block‐Poly(L‐lactide) Triblock Copolymer Thin Films with Nanochannels: An AFM Study

This paper aims to report the fabrication of biodegradable thin films with micro‐domains of cylindrical nanochannels through the solvent‐induced microphase separation of poly(L ‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(L ‐lactide) (PLA‐b‐PEG‐b‐PLA) triblock copolymers with different block ratios. In our experimental scope, an increase in each of the block lengths of the PLA and PEG blocks led to both a variation in the average number density (146 to 32 per 100 µm²) and the size of the micro‐domains (140 to 427 nm). Analyses by atomic force microscopy (AFM) and fluorescence microscopy indicated that the hydrophilic PEG nanochannels were dispersed in the PLA matrix of the PLA‐b‐PEG‐b‐PLA films. We demonstrated that the micro‐domain morphology could be controlled not only by the block length of PEG, but also by the solvent evaporation conditions.

     

Effect of the Molecular Weights of Poly‐L‐Arginine on Membrane Strength and Permeability of Poly‐L‐Arginine Group Microcapsules

A novel poly‐L ‐arginine group microcapsule was produced to investigate its nutritional function and pharmacological efficacy. The molecular weight of poly‐L ‐arginine is an important parameter for its membrane strength, but does not obviously affect its release property. Thus, poly‐L ‐arginine can be used as a kind of new membrane material in microcapsules, and it is expected to be used as an therapeutic and biodegradable drug carrier.

Influence of the molecular weight of poly‐L ‐arginine on membrane thickness.     

New Strategy for Controlling Biodegradability of Biodegradable Polyesters by Enzyme‐Catalyzed Surface Grafting

A novel preparation method for the core‐shell type biodegradable polyesters or biodegradable materials grafted with biodegradable polyesters was developed by alkaline surface treatment of biodegradable polyester films and subsequent enzymatic polymerization of aliphatic lactones, one example of which is shown in this study, i.e., the preparation of poly(L ‐lactide) (PLLA) film grafted with poly(ε‐caprolactone). It is revealed that only alkaline surface treatment or the combination of alkaline surface treatment and enzyme‐catalyzed grafting, the former and the latter, respectively accelerating and delaying the enzymatic degradation of PLLA, will give PLLA materials having a wide variety of biodegradability. Also, the specificity of the enzyme used for hydrolysis could be used to confirm the grafted chain species.

     

Copolymerization of Ethylene with Sterically Hindered 3,3‐Dimethyl‐1‐Butene Using a Chain‐Walking Pd‐Diimine Catalyst

In this Communication, the copolymerization of ethylene with a sterically hindered α‐olefin comonomer, γ‐trisubstituted 3,3‐dimethyl‐1‐butene (DMB), using a chain‐walking Pd‐diimine catalyst, [(ArNC(Me) (Me)CNAr)Pd(CH₃)(NCMe)]SbF₆ (Ar2,6‐(iPr)₂C₆H₃) ( 1 ) is reported. In spite of its high steric bulkiness in the close proximity of the double bond, appreciable DMB incorporations (up to 3 mol‐%) are successfully achieved in the copolymers. The chain microstructure of the copolymers is elucidated, and the effect of DMB incorporation on polymer topology and thermal properties are examined. This work thus demonstrates the high capability of the Pd‐diimine catalyst in incorporating sterically encumbered α‐olefins.

     

Linear Azo Polymer Containing Conjugated 5,5′‐Azodisalicylic Acid Segments in the Main Chain: Synthesis,Characterization, and Degradation

Summary: Copolymers of poly(ethylene oxide) (PEO) and 5,5′‐azodisalicylic acid (Olsalazine, OLZ) were synthesized and evaluated by hydrolysis and in‐vitro biodegradation with azoreductase. It was found that changing the molecular weight of the PEO blocks affected the loading ratio of OLZ, and resulted in significant differences in the hydration and degradability of the copolymers. These novel azo‐containing copolymers can be used in colon‐specific drug delivery.

Release of 5‐ASA from OLZ and PEO‐OLZ copolymers incubated with rat cecum content in the presence of benzyl viologen and α‐D ‐glucose.     

Preparation of Silk‐Like Fibers Designed by Self‐Assembled Ionic Polypeptides

Natural protein fibers, such as silk, having high‐performance characteristics have been important materials in biopolymer research. This article reports the development of a silk‐like extensible poly(α,L ‐amino acid) fiber inspired by self‐assembly of polypeptides in living systems. Electrostatic interaction was employed as the driving force for building the fiber, and we succeeded in spinning the fiber from an aqueous solution interface between poly(α,L ‐lysine) (PLL) and poly(α,L ‐glutamic acid) (PLG). When the PLL/PLG fiber was formed, the conformations of PLL and PLG were changed from random to β‐structures. A remarkable feature of the PLL/PLG fiber is the high extensibility. Mechanical stretching of the PLL/PLG fiber resulted in a change from an extensible fiber to a rigid and strong fiber. These features depend on the molecular conformation and the deviation in the amino acid composition of the PLL/PLG fibers. This concept and the poly(α,L ‐amino acid) fibers themselves allow the production of new protein fibers and aid the development of the science of protein folding as well as giving insight into the noncovalent interactions involved in self‐assembly.

SEM micrograph showing that the surface of the stretched fiber is smooth.     

“Clip” and “Click” Chemistries Combination: Toward Easy PEGylation of Degradable Aliphatic Polyesters

α‐Methoxy‐ω‐alkyne poly(ethylene glycol) (PEG) was tagged with pendent N‐hydroxy‐succinimidyl activated esters by photografting of a molecular clip. This easily synthesized heterofunctional PEG was found to be a versatile building block for (i) conjugation with an amino derivative and (ii) grafting to azido functional aliphatic polyesters backbone by Huisgen's 1,3‐dipolar cycloaddition. This original combination of “clip” and “click” reactions provides a versatile and straightforward pathway for the synthesis of functional amphiphilic and degradable copolymers valuable for biomedical applications such as in drug‐delivery.

     

A Green Approach for the Synthesis and Thiol‐ene Modification of Alkene Functio1489lized Poly(2‐oxazoline)s

The bulk polymerization of 2‐(dec‐9‐enyl)‐2‐oxazoline ( DecEnOx ), a fatty acid‐based monomer for the cationic ring‐opening polymerization, is reported. Furthermore, under optimal conditions, namely microwave heating at 100 °C, the bulk copolymerization with 2‐ethyl‐2‐oxazoline yielded well‐defined copolymers. Due to its pendant alkene groups DecEnOx ‐based polymers possess the potential to be modified in efficient thiol‐ene reactions. The functionalization with thiols, e.g., dodecanethiol and 2,3,4,6‐tetra‐O‐acetyl‐1‐thio‐β‐D ‐glycopyranose in “green” solvents is demonstrated.

     

Chitinase‐Catalyzed Synthesis of a Chitin‐Xylan Hybrid Polymer: A Novel Water‐Soluble β(1 → 4) Polysaccharide Having an N‐Acetylglucosamine‐Xylose Repeating Unit

Summary: A chitin‐xylan hybrid polysaccharide having β(1 → 4)‐linked alternating structure of N‐acetyl‐D ‐glucosamine and D ‐xylose was synthesized via chitinase‐catalyzed polymerization. An oxazoline derivative of D ‐xylosyl‐β(1 → 4)‐N‐acetyl‐D ‐glucosamine ( 1 ) was effectively polymerized by the catalysis of chitinase from Bacillus sp., giving rise to a water‐soluble chitin‐xylan hybrid polysaccharide ( 2 ) in good yields. Molecular weights ( ) of 2 reached 1 500, which corresponds to 8–10 saccharide units.

A chitin‐xylan hybrid polysaccharide ( 2 ) synthesized via chitinase‐catalyzed polymerization.     

Synthesis and Characterization of Amphiphilic Biodegradable Copolymer,Poly(aspartic acid‐co‐lactic acid)

An amphiphilic biodegradable polymer, poly(aspartic acid‐co‐lactic acid) (PAL), was synthesized by simply heating a mixture of aspartic acid (Asp) and L ‐lactide without additional catalysts or solvents. The unique branched architecture comprising succinimide units and lactic acid units was confirmed by IR and NMR spectroscopy. A copolymer of sodium aspartate and lactic acid (PALNa) was prepared by reacting PAL with an aqueous sodium hydroxide solution. The PAL was soluble in many organic solvents, while the PALNa was soluble in methanol and water. The hydrolytic degradation behavior of PAL varied with the copolymer composition. A higher Asp content resulted in a faster molecular weight decrease, and introducing glycolic acid units accelerated the degradation rate.

Microphotograph of microsphere of PAL‐1/5.     

Rapid Ring‐Opening Polymerization of D,L‐Lactide by Microwaves

Summary: Poly(D ,L ‐lactide) with a molar mass of 10⁵ g · mol⁻¹ and a yield over 90% was produced in 10 min by the ring‐opening polymerization of D ,L ‐lactide under microwave irradiation with forward power of 255 W. A degradation of the poly(D ,L ‐lactide) was also induced by microwaves with a power level over 340 W. The molar mass of poly(D ,L ‐lactide) was dependent upon the competition between the polymerization of D ,L ‐lactide and the degradation of the resulting polymer.

Profiles of molar mass versus microwave irradiation time (1.8 g DLLA, 0.1% Sn(Oct)₂).     

Poly[lactic‐co‐(glycolic acid)]‐Grafted Hyaluronic Acid Copolymer Micelle Nanoparticles for Target‐Specific Delivery of Doxorubicin

PLGA‐grafted HA copolymers were synthesized and utilized as target specific micelle carriers for DOX. For grafting hydrophobic PLGA chains onto the backbone of hydrophilic HA, HA was solubilized in an anhydrous DMSO by nano‐complexing with dimethoxy‐PEG. The carboxylic groups of HA were chemically grafted with PLGA, producing HA‐g‐PLGA copolymers. Resultant HA‐g‐PLGA self‐assembled in aqueous solution to form multi‐cored micellar aggregates and DOX was encapsulated during the self‐assembly. DOX‐loaded HA‐g‐PLGA micelle nanoparticles exhibited higher cellular uptake and greater cytotoxicity than free DOX for HCT‐116 cells that over‐expressed HA receptor, suggesting that they were taken up by the cells via HA receptor‐mediated endocytosis.

     

Water‐Soluble N‐(n‐Fatty acyl)chitosans

Chitosan was partially N‐acylated by treatment with n‐fatty acid anhydrides in a homogeneous solution in 2 vol.‐% aqueous acetic acid‐methanol (1:2 v/v). The degree of substitution (d.s.) for N‐acyl groups in the water‐soluble N‐acylchitosan derivatives was in the range of 0.42–0.82 for N‐acetyl, 0.37–0.76 for N‐propionyl, 0.52–0.71 for N‐butyryl and 0.54–0.64 for N‐pentanoyl and ca. 0.58 for N‐hexanoyl, respectively.

Water soluble N‐(n‐fatty acyl)chitosans.