Synthesis and Characterization of Star‐Shaped Diblock Poly(ε‐caprolactone)/Poly(ethylene oxide) Copolymers

Summary: Star‐shaped hydroxy‐terminated poly(ε‐caprolactone)s (ssPCL), with arms of different lengths, were obtained by ring‐opening polymerization (ROP) of ε‐caprolactone initiated by pentaerythritol, and were condensed with α‐methyl‐ω‐(3‐carboxypropionyloxy)‐poly(ethylene oxide)s ( = 550–5 000) to afford four‐armed PCL‐PEO star diblock copolymers (ssPCL‐PEO). The polymers were characterized by ¹H and ¹³C NMR spectroscopy and size‐exclusion chromatography (SEC). The melting behavior of ssPCLs was studied by differential scanning calorimetry (DSC). X‐ray diffraction and DSC techniques were used to investigate the crystalline phases of ssPCL‐PEOs.

The part of the synthesis of four‐armed star‐shaped diblock poly(ε‐caprolactone)‐poly(ethylene oxide) copolymers as described.     

Synthesis,Characterization, and thermoresponsive properties of Helical Polypeptides Derivatized from Poly(γ−4‐(3‐chloropropoxycarbonyl)benzyl‐L‐glutamate)

A series of side‐chain‐functionalized α‐helical polypeptides, i.e., poly(γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamate) (6) have been prepared from n‐butylamine initiated ring‐opening polymerization (ROP) of γ‐4‐(3‐chloropropoxycarbonyl)benzyl‐_L‐glutamic acid‐based N‐carboxyanhydride. Polypeptides bearing oligo‐ethylene‐glycol (OEG) groups or 1‐butylimidazolium salts were prepared from 6 via copper‐mediated [2+3] alkyne‐azide 1,3‐dipolar cycloaddition or nuleophilic substitution, respectively. CD and FTIR analysis revealed that the polymers adopt α‐helical conformations both in solution and the solid state. Polymers bearing OEG (m = 3) side‐chains showed reversible LCST‐type phase transition behaviors in water while polymers bearing 1‐butylimidazolium and I^? counter‐anions exhibited reversible UCST‐type transitions in water. Variable‐temperature UV‐vis analysis revealed that the phase transition temperatures (T_pts) were dependent on the main‐chain length and polymeric concentration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2469–2480     

Aggregation behavior of poly(γ‐benzyl‐L‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L‐glutamate) rod‐coil‐rod triblock copolymer in N,N‐dimethylformamide

Solution property of poly(γ‐benzyl‐L ‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L ‐glutamate) (GIG copolymer) was studied by using dynamic light scattering and static light scattering for N,N‐dimethylformamide (DMF) solution and DMF/toluene mixed solutions. GIG copolymer proved to aggregate in DMF and under DMF‐rich condition, that is, high‐polar region. The aggregate decreased in size, and completely disappeared under toluene‐rich condition, that is, low‐polar region. The correlation between solubility parameter and aggregate size of GIG copolymer in the DMF/toluene solution systems quantitatively demonstrated how strongly polarity caused by hydrogen bond made an impact on the aggregation behavior. Because the main driving force to the aggregation under DMF‐rich condition originates with polyisoprene (PIP) blocks, the aggregate in DMF is considered to be a core‐shell micelle consisting of flexible PIP core surrounded by rigid poly(γ‐benzyl‐L ‐glutamate) (PBLG) shell. The values of dimensionless parameter ρ, defined as the ratio of radius of gyration 〈S²〉^1/2 to hydrodynamic radius R_H, revealed that a single chain of GIG copolymer had the form of rigid rod with flexibility, that is, once‐broken rod, caused by the incorporation of a flexible PIP chain between two rigid PBLG rods in the DMF/toluene solution system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1740–1748, 2010     

Synthesis and Characterization of a Block Copolymer Containing Regioregular Poly(3‐hexylthiophene) and Poly(γ‐benzyl‐L‐glutamate)

Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.

     

Star‐Shaped Polymer Consisting of a Porphyrin Core and Poly(L‐lysine) Dendron Arms: Synthesis,Drug Delivery,and In Vitro Chemo/Photodynamic Therapy

A novel star‐shaped polymer, porphyrin‐poly(L‐lysine) dendrons (PP‐PLLD), is synthesized by the click reaction between azido‐modified porphyrin and propargyl focal point poly(L‐lysine) dendrons. Its chemical structure is characterized by ¹H nuclear magnetic resonance, Fourier transform infrared spectroscopy, and gel permeation chromatography (GPC) is analyses etc. Due to its amphiphilic property, the obtained PP‐PLLD has a low critical micelle concentration in an aqueous solution, and can load doxorubicin (DOX) with a loading amount of 64 μg mg⁻¹. By in vitro toxicity assay, PP‐PLLD has no dark cytotoxicity but has significant phototoxicity. Moreover, DOX‐loaded PP‐PLLD shows a higher cytotoxicity under the light condition than PP‐PLLD or DOX alone, suggesting PP‐PLLD has a potential application in combined photodynamic therapy and chemotherapy.     

Advances in Star‐Shaped π‐Conjugated Systems: Properties and Applications

Until recently π‐conjugated organic materials are based mainly on linear systems. Recent years, however, have brought about increasing interest in molecules boasting a dendritic, branched, or star‐shaped architecture. This tendency is a direct result of the ongoing search for materials with progressively better properties. Such compounds, featuring novel, 3D architectures, exhibit a multitude of interesting qualities, making them stand out from well‐known materials. The direction of star‐shaped compound application is determined by whether they are able to form aggregates, π‐stacks. This feature is a source of some astounding properties, coveted in numerous applications. Among this class of compounds high charge mobility, high fluorescence efficiency, and good charge separation are all found. Depending on the structure of the core, the molecule may adopt various types of symmetry. Similarly, the conjugation of orbitals may extend over the whole structure or be interrupted at chosen segments. The number of papers pertaining to star‐shaped oligomers and polymers is ascending with each year, evidencing a growing interest in them. Consequently, this Review focuses particularly on the most recent reports concerning modification of the structure and properties of the aforementioned type of compounds, as well as on the development of devices based on them.

     

Convenient synthesis of poly(γ‐benzyl‐L‐glutamate) from activated urethane derivatives of γ‐benzyl‐L‐glutamate

A series of activated urethane‐type derivatives of γ‐benzyl‐L ‐glutamate were synthesized, and their potential as monomers for polypeptide synthesis was investigated. The derivatives of the focus of this work were a series of N‐aryloxycarbonyl‐γ‐benzyl‐L ‐glutamate 1 , of which aryl groups were phenyl, 4‐chlorophenyl, and 4‐nitrophenyl. These urethanes 1 were reactive in polar solvents such as dimethylsulfoxide, N,N‐dimethylformamide (DMF), and N,N‐dimethylacetamide (DMAc), and were efficiently converted into poly(γ‐benzyl‐L ‐glutamate) (poly(BLG)) under mild conditions; at 60 °C without addition of any catalyst. Among the three urethanes, that having 4‐nitrophenoxycarbonyl group 1c was the most reactive to give poly(BLG) efficiently, as was expected from the highly electron deficient nature of the nitrophenoxycarbonyl group. On the other hand, the urethane 1a having phenoxycarbonyl group was also efficiently converted into poly(BLG), in spite of the intrinsically less electrophilicity of the phenoxycarbonyl group. In addition, the successful formation of poly(BLG) by the reaction of 1a favored its diluted concentration (0.1 M) much more than 2.0 M, the optimum initial concentration for 1c . ¹H NMR spectroscopic analyses of the reactions in situ revealed that the predominant pathway from 1 to poly(BLG) involved the intramolecular cyclization of 1 into the corresponding N‐carboxyanhydride, with release of phenol and its successive ring‐opening polymerization with release of carbon dioxide. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2649–2657, 2008     

Synthesis of a Star‐Shaped Copolymer with a Hyperbranched Poly(3‐methyl‐3‐oxetanemethanol) Core and Tetrahydrofuran Arms by One‐Pot Copolymerization

A star‐shaped copolymer consisting of a hyperbranched poly(3‐methyl‐3‐oxetanemethanol) core and polytetrahydrofuran arms was obtained by a one‐step cationic copolymerization of 3‐methyl‐3‐oxetanemethanol with tetrahydrofuran initiated by BF₃·OEt₂. Tetrahydrofuran served as a solvent at the earlier stage of the polymerization. After 3‐methyl‐3‐oxetanemethanol was exhausted essentially, the resulting hyperbranched species acted as a macro‐initiator, and initiated the cationic polymerization of tetrahydrofuran. This can be attributed to the large difference in reactivities of the monomers.     

Shear piezoelectricity in single‐wall carbon nanotube/poly(γ‐benzyl‐L‐glutamate) composites

Single‐wall carbon nanotubes (SWCNTs) have been added to high molecular weight poly(γ‐benzyl‐L ‐glutamate), or PBLG, to evaluate their effects on the polymer's shear piezoelectricity. While the addition of SWCNTs increased various PBLG physical properties such as electrical conductivity, dielectric constant, several mechanical properties, and electrostriction coefficient, the shear piezoelectricity remained constant up to a 0.3 wt % SWCNT concentration. The composite crystallinity, orientation, and SWCNT alignment (measured by X‐ray diffraction, birefringence, and polarized Raman spectroscopy, respectively) were found to be constant up to this same concentration, corroborating the shear piezoelectric findings. PBLG composites made with acid‐treated (and therefore less electrically conductive) SWCNTs exhibited similar shear piezoelectric behavior, indicating that neither the SWCNT type, concentration (up to the percolation threshold), nor electrical conductivity influences PBLG shear piezoelectricity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Synthesis and characterization of macroinitiator‐amino terminated PEG and poly(γ‐benzyl‐L‐glutamate)‐PEO‐poly(γ‐benzyl‐L‐glutamate) triblock copolymer

Macroinitiator‐amino terminated poly(ethylene glycol) (PEG) (NH₂‐PEO‐NH₂) was prepared by converting both terminal hydroxyl groups of PEG to more reactive primary amino groups. The synthetic route involved reactions of chloridize, phthalimide and finally hydrazinolysis. Furthermore, poly(γ‐benzyl‐L ‐glutamate)‐poly(ethylene oxide)‐poly(γ‐benzyl‐L ‐glutamate) (PBLG‐PEO‐PBLG) triblock copolymer was synthesized by polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (Bz‐L‐GluNCA) using NH₂‐PEO‐NH₂ as macroinitiator. The resultant NH₂‐PEO‐NH₂ and triblock copolymer were characterized by FT‐IR, ¹H‐NMR and gel permeation chromatography (GPC) techniques. The results demonstrated that the degree of amination of the NH₂‐PEO‐NH₂ could be up to 1.95. The molecular weight of the PBLG‐PEO‐PBLG triblock copolymer could be adjusted easily by controlling the molar ratio of Bz‐L ‐Glu NCA to the macroinitiator NH₂‐PEO‐NH₂. Copyright © 2004 John Wiley & Sons, Ltd.     

New Linear and Star‐Shaped Thermogelling Poly([R]‐3‐hydroxybutyrate) Copolymers

The synthesis of multi‐arm poly([R]‐3‐hydroxybutyrate) (PHB)‐based triblock copolymers (poly([R]‐3‐hydroxybutyrate)‐b‐poly(N‐isopropylacrylamide)‐b‐[[poly(methyl ether methacrylate)‐g‐poly(ethylene glycol)]‐co‐[poly(methacrylate)‐g‐poly(propylene glycol)]], PHB‐b‐PNIPAAM‐b‐(PPEGMEMA‐co‐PPPGMA), and their subsequent self‐assembly into thermo‐responsive hydrogels is described. Atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide (NIPAAM) followed by poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) and poly(propylene glycol) methacrylate (PPGMA) was achieved from bromoesterified multi‐arm PHB macroinitiators. The composition of the resulting copolymers was investigated by ¹H and ¹³C J‐MOD NMR spectroscopy as well as size‐exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The copolymers featuring different architectures and distinct hydrophilic/hydrophobic contents were found to self‐assemble into thermo‐responsive gels in aqueous solution. Rheological studies indicated that the linear one‐arm PHB‐based copolymer tend to form a micellar solution, whereas the two‐ and four‐arm PHB‐based copolymers afforded gels with enhanced mechanical properties and solid‐like behavior. These investigations are the first to correlate the gelation properties to the arm number of a PHB‐based copolymer. All copolymers revealed a double thermo‐responsive behavior due to the NIPAAM and PPGMA blocks, thus allowing first the copolymer self‐assembly at room temperature, and then the delivery of a drug at body temperature (37 °C). The non‐significant toxic response of the gels, as assessed by the cell viability of the CCD‐112CoN human fibroblast cell line with different concentrations of the triblock copolymers ranging from 0.03 to 1 mg mL^?1, suggest that these PHB‐based thermo‐responsive gels are promising candidate biomaterials for drug‐delivery applications.     

Enhancing the Orienting Properties of Poly(γ‐benzyl‐L‐glutamate) by means of Additives

Residual dipolar couplings (RDCs) have recently become increasingly important in organic structure determination due to their unique information content. One main limitation for the use of RDCs in organic compounds is the orientation that needs to be induced to be able to measure RDCs. So far, there are very few possibilities to modulate the orientational properties of organic solutes and even less when chiral media are considered. Based on our recent findings that the critical concentration of the liquid‐crystalline phase of homopolypeptides depends on their molecular weight, we sought for further ways to modulate the orienting properties. We were especially interested in seeing whether we could not only influence the induced degree of orientation, but whether we could also change the solute′s preferred orientation and even enhance enantiodifferentiation. We thus tried different aprotic and protic additives and were successful in all of the above‐mentioned aspects by using CCl₄ as the additive. Furthermore, we consider DMSO to be a very useful additive. The LC phase of low MW poly(γ‐benzyl‐L ‐glutamate) (PBLG) is usually unstable when DMSO is added. The high MW PBLG used in this study, however, remained stable up to a DMSO/CDCl₃ ratio of 1:2. By using this combination of solvents, the alignment of the two enantiomers of a compound, which is insoluble in CDCl₃, namely, the HCl salt of a tryptophane ester, was possible leading to high‐quality spectra. The two enantiomers of the tryptophane ester showed different couplings, thus indicating that enantiodifferentiation is taking place. Thus we were able to modulate the orienting properties (degree of orientation, preferred orientation and enantiodifferentiation) of PBLG by using additives and to increase the accessible solvent and solute range significantly.     

Dielectric study of the phase diagram of the poly(γ‐benzyl‐L‐glutamate)/dimethylformamide system

The phase diagram for solutions of poly(γ‐benzyl‐L ‐glutamate) in dimethylformamide has been investigated over the entire composition and temperature ranges with dielectric spectroscopy. The dielectric response in this system is dominated by ionic mobility, and phase transitions have been detected as changes in the ionic conductivity. The phase boundaries, determined by dielectric spectroscopy, are consistent with earlier published results obtained by a combination of optical microscopy observations and nuclear magnetic resonance and differential scanning calorimetry studies. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3943–3952, 2004     

Self‐Assembly of Poly(γ‐benzyl L‐glutamate)‐graft‐Poly(ethylene glycol) and Its Mixtures with Poly(γ‐benzyl L‐glutamate) Homopolymer

Summary: Self‐association behaviors of poly(γ‐benzyl L ‐glutamate)‐graft‐poly(ethylene glycol) (PBLG‐graft‐PEG) and its mixtures with PBLG homopolymer in aqueous media were investigated by fluorescence spectroscopy, transmission electron microscopy (TEM), and nuclear magnetic resonance (NMR) spectroscopy. It was revealed that PBLG‐graft‐PEG could self‐assemble to form polymeric micelles with a core‐shell structure in the shape of spindle. The introduction of PBLG homopolymer not only decreases the critical micelle concentration, but also changes the morphology of the micelles.

The excitation fluorescence spectra of pyrene as a function of concentrations for the mixture of PBLG‐graft‐PEG with PBLG and a TEM image of the formed micelles.     

Poly(γ‐benzyl‐L‐glutamate)‐functionalized single‐walled carbon nanotubes from surface‐initiated ring‐opening polymerizations of N‐carboxylanhydride

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate) (PBLG) by ring‐opening polymerizations of γ‐benzyl‐L ‐glutamic acid‐based N‐carboxylanhydrides (NCA‐BLG) using amino‐functionalized SWCNTs (SWCNT‐NH₂) as initiators. The SWCNT functionalization has been verified by FTIR spectroscopy and transmission electron microscopy. The FTIR study reveals that surface‐attached PBLGs adopt random‐coil conformations in contrast to the physically absorbed or bulk PBLGs, which exhibit α‐helical conformations. Raman spectroscopic analysis reveals a significant alteration of the electronic structure of SWCNTs as a result of PBLG functionalization. The PBLG‐functionalized SWCNTs (SWCNT‐PBLG) exhibit enhanced solubility in DMF. Stable DMF solutions of SWCNT‐PBLG/PBLG with a maximum SWCNTs concentration of 259 mg L^?1 can be readily obtained. SWCNT‐PBLG/PBLG solid composites have been characterized by differential scanning calorimetry, thermogravimetric analysis, wide/small‐angle X‐ray scattering (W/SAXS), scanning electron microscopy, and polarized optical microscopy for their thermal or morphological properties. Microfibers containing SWCNT‐PBLG and PBLG can also be prepared via electrospinning. WAXS characterization reveals that SWCNTs are evenly distributed among PBLG rods in solution and in the solid state where PBLGs form a short‐range nematic phase interspersed with amorphous domains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2340–2350, 2010     

Synthesis of Poly(α‐alkyl β,L‐aspartate)s by Transesterification

A new procedure for the preparation of poly(α‐alkyl β,L ‐aspartate)s based on the transesterification of polyα‐benzyl β,L ‐aspartate) with alcohols in the presence of titanium tetrabutoxide is described. The reaction proceeded to almost total conversion without substantial racemization or imidation. Thermal properties of the resulting polymers were comparable to those of their homologues obtained by anionic ring‐opening polymerization of β‐lactams and their thermal stability is even higher.