适合于内窥成像的共路型光学相干层析成像系统

提出了一种采用光纤型迈克耳孙干涉仪进行光程补偿的菲佐型光学相干层析成像(OCT)系统.该系统的传感探头为共路干涉结构,以解决现有内窥光学相干层析成像系统中存在的探头运动导致图像失真、以及更换使用不同探头时需进行色散和偏振态调节等问题.光程补偿和振动干扰实验结果表明,光程补偿方法正确可行,系统对环境干扰不敏感.利用研制的系统对反射镜和近红外卡进行了成像实验,验证了系统的有效性.提出的方法非常适合于内窥成像,并给出了把系统扩展为内窥光学相干层析成像系统的具体实现过程.     

Detection Schemes for Optical-Coherence-Domain Imaging of Biological Tissues

Optical coherence tomography (OCT) is a novel imaging modality based on low-coherence interferometry. This paper summarizes some of our latest work on the development of OCT where we have taken two approaches. In the first approach we have developed a phase-drift-suppression method for stable heterodyne detection in the presence of phase fluctuations. In the second approach we have concentrated on the development of two-dimensional heterodyne detection techniques for real-time imaging. A novel detection scheme has been proposed, which enables parallel heterodyne detection with a commercially available imager such as a charge-coupled-device camera. Meanwhile, a non-scanning OCT system configuration based on off-axis interferometry is being studied. Using a newly developed angular-dispersion imaging scheme, we show that the axial reflectance profile in OCT measurement can be detected instantaneously with a sensor array.     

Achromatic nulling interferometer for stellar coronography

A common-path interferometer that is intended for observation of a faint off-axis light source against the background of an intense on-axis source is suggested. The on-axis source and its replicated image acquire an achromatic phase shift of 180° and interfere in antiphase. The achromatic phase shift is due to the geometrical phase in the configuration of a 3D interferometer. Interference spatially separates the dark and bright fields of the on-axis source by directing them to different sides of a beam splitter. At the same time, interference does not attenuate the field of the off-axis source, directing it to different sides of the beam splitter with equal intensities. Such a configuration of the common-path interferometer provides mechanical stability.     

离轴非球面零位补偿检验的非线性畸变校正

在大口径、快焦比非球面的补偿检验中，入射光线在短距离内发生大角度急剧折转，导致干涉仪面形检验结果图像产生非线性畸变，严重影响了数控小磨盘抛光的位置精度和误差去除效率。为了校正离轴非球面在补偿检验中产生的图像畸变，提出了一种校正非线性畸变图像的方法，通过同心环带法确定畸变中心位置并利用光线追迹建立被检镜到干涉图的映射关系。针对某一光学系统的520 mm×250 mm的离轴抛物面主镜进行了畸变图像的校正，校正结果面形与工件面形的位置偏差降到1 mm以下，满足小磨盘抛光的工作要求。     

Shack-Hartmann波前传感器非零位在轴检测离轴非球面反射镜

在离轴非球面反射镜研磨后期和粗抛光阶段,被测反射镜面形与理想面形存在着较大的偏差,表面反射率较低,采用干涉测量会因局部区域干涉条纹过密或条纹对比度过低,造成普通干涉仪无法进行全口径测量,而普通接触式轮廓仪测量精度此时已经不能满足加工要求。鉴于Shack-Hartmann波前传感器较大的动态范围和较高的测量精度,提出了采用Shack-Hartmann波前传感器非零位在轴检测离轴非球面面形,研究了该方法的检测原理并搭建了检测系统,分析了系统误差来源,并制作了用于在轴检测离轴非球面的参考波前,对两个不同加工精度的离轴非球面反射镜进行了测量,并与干涉仪的测量结果进行了对比。对比结果表明,Shack-Hartmann波前传感器的测量结果是正确可靠的,并且可以弥补轮廓仪测量和干涉仪测量的不足,从而证明了采用Shack-Hartmann波前传感器在轴检测离轴非球面的可行性和正确性。     

Off-axis low coherence interferometry contouring

In this article we present a method to achieve tri-dimensional contouring of macroscopic objects. A modified reference wave speckle interferometer is used in conjunction with a source of reduced coherence. The depth signal is given by the envelope of the interference signal, directly determined by the coherence length of the source. Fringes are detected in the interferogram obtained by a single shot and are detected by means of adequate filtering. With the approach based on off-axis configuration, a contour line can be extracted from a single acquisition, thus allowing to use the system in harsh environment.     

光学相干断层扫描成像新技术OCT

光学相干层析成像技术（optical coherence tomography,简称OCT）是一种新型成像方法,在生物医学和材料等许多领域有广泛的应用。本文介绍了OCT的基本原理,并给出了用该装置对生物组织样品的成像结果。此外还用计算机图像处理的方法,使得图像分辨率得到了进一步提高。     

干涉型计算层析成像光谱仪的图像重建

针对干涉型计算层析成像光谱仪(CTII)提出了一种光谱图像数据立方体的重建方法。干涉型计算层析成像光谱仪是一种将空间调制傅里叶变换成像光谱仪(FTIS)的原理与计算层析成像光谱仪(CTIS)的原理相结合的一种新型成像光谱仪,具有高通量、高光谱分辨力以及高空间分辨力的特点。分析和讨论了干涉型计算层析成像光谱仪的工作原理以及获取图像的特征,介绍了光谱图像数据立方体的重建方法。根据多角度投影数据的特点提出采用卷积反投影计算层析成像图像重建算法,给出了图像重建步骤以及相应的数学表达式。对D65光源照明条件下的396×396像素目标进行了仿真实验,投影角度为0~180°,步长为0.5°,列出了仿真实验部分结果。实验结果验证了干涉型计算层析成像光谱仪及其图像重建算法的可行性。     

Common-path phase-shifting digital holographic microscopy: A way to quantitative phase imaging and superresolution

We present an experimental setup useful for complex amplitude evaluation and phase image quantification of three-dimensional (3-D) samples in digital holographic microscopy (DHM). It is based on a common-path interferometric configuration performed by dividing the input plane in two contiguous regions and by placing a translation grating near to the Fourier plane. Then, complex amplitude distribution of the sample under test is recovered with phase-shifting standard method obtained by moving the grating using a linear motion stage. Some experimental results of an USAF resolution test are presented for different numerical aperture (NA) microscope lenses. In a second part, the proposed setup is tested under superresolution purposes. Based on the object’s spectrum shift produced by off-axis illumination, we use time multiplexing to generate a synthetic aperture enlargement that improves the final image resolution. Experimental results for the case of a biosample (human red blood cells) and a commercial low NA microscope lens validates the suggested superresolution approach.     

High-speed fiber based polarization-sensitive optical coherence tomography of in vivo human skin

A high-speed single-mode fiber-based polarization-sensitive optical coherence tomography (PS OCT) system was developed. With a polarization modulator, Stokes parameters of reflected flight for four input polarization states are measured as a function of depth. A phase modulator in the reference arm of a Michelson interferometer permits independent control of the axial scan rate and carrier frequency. In vivo PS OCT images of human skin are presented, showing subsurface structures that are not discernible in conventional OCT images. A phase retardation image in tissue is calculated based on the reflected Stokes parameters of the four input polarization states.     

Two-dimensional scanning probe driven by a solenoid-based single actuator for optical coherence tomography

We propose the two-dimensional scanning probe operating with a single actuator, which is thought useful as a sample probe for optical coherence tomography (OCT). The probe was designed to use a single-body lensed fiber cantilever loaded with an iron-bead and driven by a single-solenoid actuator. Elliptic spiral trace patterns were achieved using off-axis magnetic fields of the solenoid. A three-dimensional OCT image was obtained for a scanning area of 3.8 mm × 3.4 mm at an acquisition speed of 16.7 s/V. Up to 27 Hz B-scan rate, the proposed probe worked well, and 1000 A-scans were made per each B-scan.     

离轴抛物镜的最佳子午像面

分析指出,若满足一定的近似条件,离轴抛物镜存在一倾斜的最佳子午像面。文中导出了这一像面的倾角和其上子午弥散大小。理论分析和实际计算结果均表明,此像面上子午像质得到显著提高。     

Common-path achromatic interferometer-coronagraph: nulling of polychromatic light

A three-dimensional common-path interferometer is proposed, which can achromatically null out an on-axis source while it maintains the detectability of an off-axis source. A geometric phase in the three-dimensional interferometer introduces an achromatic pi-phase shift to the light from the on-axis source, such that destructive interference nulls out the axial light at one of the ports of the interferometer. Light from the off-axis source, which is exempt from the pi-phase shift, comes out from both ports with equal intensity. The common-path scheme makes the system highly immune to environmental disturbances.     

Influence of Phase Drift on Optical Coherence Tomography Using a CCD Camera-Based Heterodyne Detection Technique

The performance of a two-dimensional heterodyne detection technique in optical coherence tomography (OCT) was studied. This technique, which is based on the frequency synchronous detection method, enables the use of an imager such as a charge coupled device (CCD) camera as a heterodyne sensor array, so that horizontal cross-sectional image can be acquired in real time without lateral scanning. OCT measurements of scattering media including a biological object were demonstrated. To evaluate the influence of phase fluctuations on the present technique, we measured and analyzed the statistical relative-standard-deviation of heterodyne signal intensity as a function of the random phase shifts between two consecutive CCD frames. Practical limitations in the signal stability and possible solutions are discussed.     

Physical foundations of achromatic nulling interferometry for stellar coronagraphy

We propose an achromatic interferometer for the observation of a faint off-axis light source against the background of a bright on-axis light source. The on-axis source and its copy acquire an achromatic phase shift by 180° and interfere with a phase difference of π. The achromatic phase shift is attributable to the geometric phase in the three-dimensional interferometer scheme. Interference spatially separates the nulled and bright fields of the on-axis source, redirecting them on opposite sides of the beamsplitter. Interference does not attenuate the field of the off-axis source and redirects it with an equal intensity on both sides of the beamsplitter. We consider the principle of operation of the nulling interferometer and constraints on the attenuation of an extended source due to the decrease in coherence. The laboratory breadboard and experiment are briefly described.     

正交光栅干涉仪对二维分立点物体成像

本文将正交光栅干涉仪的条纹箱分离,获得两个方向上的条纹箱.对于由N个分立点组成的物体,从两个条纹箱可以得到由N~2个点组成的像.其中N个点是物的格实像点,N(N—1)个是交叉项点.将光栅干涉仪绕其对称轴转过一角度,得到第二个像.与第一个像相比,N(N—1)个交叉项点的空间位置发生了变化,而N个真实像点未变.因此,将这两个像相乘,即能消除交叉项点而获得真实像点.利用这一方法,给出了实验结果.     

利用变迹术和相干门相结合实现光学相干层析成像术轴向超分辨

光学相十层析成像（光学相干层析成像术）的轴向分辨力由光源带宽和探测光束的聚焦条件共同决定。提高光学相干层析成像术轴向分辨力的方法主要基于带宽光源技术。提出了一种将变迹术与光学相十层析成像术相干门有机结合的方法来提高其轴向分辨力。通过适当形式的光瞳滤波器．使光学相干层析成像术系统轴向响应的主瓣宽度缩小到相干门之内,而其旁瓣则处于相干门之外．不对相干成像产生有效贡献。这样．就能在光源带宽不变的条件下,有效提高光学相十层析成像术的轴向分辨力,避免了采用宽带光源所带来的费用昂贵和系统复杂等缺陷。     

Digital holographic shape measurement using Fizeau microscopy

We present a Fizeau interferometer using a microscopic objective as a tool for surface contouring without the need for a numerical lens for reconstruction. The interferometer is associated with a telescope system to feature the object with collimated light. The experiment is conducted on two objects possessing different step heights.The phase maps from the captured off-axis holograms are calculated numerically, which allows us to deduce the contours of the objects. The great advantages of the presented technique are that it can be done in real time and there is no need for numerical lenses for micro-objects reconstruction.     

离轴非球面在细磨与粗抛阶段的波面再现技术

基于付科法的离轴非球面波面再现检测技术,通过对付科检测过程的数学分析,建立了离轴非球面波面再现的数学模型,提出了波面整合算法,通过对两幅阴影图灰度值积分、去倾斜及波面整合等数据处理再现出被检离轴非球面的波面误差.在被检离轴非球面两个方向的弥散斑分别为0.152mm和0.284mm时,干涉检测得到其面形误差峰谷值为1.110μm、均方根值为0.194μm,且两种检测方法的波面轮廓相一致.实验结果验证了基于付科法的离轴非球面再现技术的正确性,可以应用于指导离轴非球面在细磨粗抛阶段的加工并且实现与精抛光阶段干涉检测的有效衔接.     

大口径凸非球面反射镜的拼接检测算法研究

大口径凸非球面子孔径拼接干涉检测中的各子孔径之间为离轴形式,各子孔径之间除了平移和倾斜变换外,还含有旋转变换,测量结果中不可避免地会出现参考面未对准的情况,当进行数据拟合处理时,需要把由未对准造成的误差去除。本文在平面检测的最小二乘拟合基础上,对拟合算法进行了改进,从而实现了离轴子孔径的拼接检测拟合。为了验证算法的有效性,采用Matlab对口径为1m的大口径凸非球面的子孔径拼接检测的拟合过程进行了仿真实验,实验结果表明,离轴式大口径凸非球面干涉检测的子孔径拼接可采用改进后的最小二乘法拟合而成,且拟合精度可达到0.0048λ。