Mono-, bi-, and trinuclear CuII-Cl containing products based on the tris(2-pyridylmethyl)amine chelate derived from copper(I) complex dechlorination reactions of chloroform

The ligand TMPA (tris(2-pyridylmethyl)amine) and its copper complexes have played a prominent role in recent (bio)inorganic chemistry studies; the copper(I) complex [CuI(TMPA)(CH3CN)]+ possesses an extensive dioxygen reactivity, and it is also known to effect the reductive dechlorination of substrates such as dichloromethane and benzyl and allyl chlorides. In this report, we describe a set of new analogues of TMPA, ligand 6TMPAOH, binucleating Iso-DO, and trinucleating SYMM. Copper(I) complexes with these ligands and a previously described binucleating ligand DO react with chloroform, resulting in reductive dechlorination and production of [CuIIx(L)Clx]x+ (x = 1, 2, or 3). X-ray crystal structures of [CuII(6TMPAOH)Cl]PF6, [CuII2(Iso-DO)Cl2](PF6)2, [CuII2(DO)Cl2](PF6)2, and [Cu3(SYMM)Cl3](PF6)3 are presented, and the compounds are also characterized by UV-vis and EPR spectroscopies as well as cyclic voltammetry. The steric influence of a pyridyl 6-substituent (in the complexes with 6TMPAOH, Iso-DO, and SYMM) on the solid state and solution structures and redox potentials are compared and contrasted to those chlorocopper(II) complexes with a pyridyl 5'-substituent (in [CuII2(DO)Cl2](PF6)2 and in [CuII(TMPA)Cl]+). Some insights into the reductive dechlorination process have been obtained by using 2H NMR spectroscopy in following the reaction of [Cu2(Iso-DO)(CH3CN)2](PF6)2 with CDCl3, in the presence or absence of a radical trap, 2,4-di-tert-butylphenol.     

Structures and redox reactivities of copper complexes of (2-pyridyl)alkylamine ligands. Effects of the alkyl linker chain length

Ligand effects on the structures and redox reactivities of copper complexes have been examined using (2-pyridyl)alkylamine derivatives as the supporting ligands, where particular attention has been focused on the effects of the alkyl linker chain length connecting the tertiary amine nitrogen atom and the pyridine nucleus: N[bond]CH(2)[bond]Py (Pym) vs N[bond]CH(2)CH(2)[bond]Py (Pye). X-ray crystallographic analysis of the copper(I) complex of tridentate ligand (Phe)L(Pym2) [N,N-di(2-pyridylmethyl)-2-phenylethylamine] (complex 1) has demonstrated that it possesses a trigonal pyramidal geometry in which a d[bond]pi interaction with an eta(1)-binding mode exists between the metal ion and one of the ortho carbons of the phenyl ring of the ligand side arm (phenethyl). The result shows sharp contrast to the d[bond]pi interaction with an eta(2)-binding mode existing in the copper(I) complex of (Phe)L(Pye2) [N,N-di[2-(2-pyridyl)ethyl]-2-phenethylamine] (complex 2). Such a d-pi interaction has been shown to affect the stability of the copper(I) complex in CH(2)Cl(2). Oxygenation of copper(I) complex 1 supported by (Phe)L(Pym2) produces a bis(mu-oxo)dicopper(III) complex, also being in sharp contrast to the case of the copper(I) complex 2 with ligand (Phe)L(Pye2), which preferentially affords a (micro-eta(2):eta(2)-peroxo)dicopper(II) complex in the reaction with O(2). Such an effect of the alkyl linker chain length of the metal binding site has also been found to operate in the RSSR (disulfide)/2RS(-) (thiolate) redox system. Namely, ligand (S2,R)L(Pym1) (di[2-[(alkyl)(2-pyridinylmethyl)amino]ethyl] disulfide) with the methylene linker group (Pym) induced the reductive disulfide bond cleavage in the reaction with copper(I) ion to give a bis(micro-thiolato)dicopper(II) complex, while the ligand with the ethylene linker group (Pye), (S2,Bn)L(Pye1) (di[2-[(benzyl)(2-(2-pyridinyl)ethyl)amino]ethyl] disulfide), gave a disulfide-dicopper(I) complex. These ligand effects in the Cu(2)[bond]O(2) and Cu(2)[bond]S(2) systems have been discussed by taking into account the difference in electron-donor ability of the pyridine nucleus between the Pym and Pye ligand systems.     

Structural comparison of copper(I) and copper(II) complexes with tris(2-pyridylmethyl)amine ligand

Copper(I) complexes with the tris(2-pyridylmethyl)amine (TPMA) ligand were synthesized and characterized to examine the effect of counteranions (Br(-), ClO(4)(-), and BPh(4)(-)), as well as auxiliary ligands (CH(3)CN, 4,4'-dipyridyl, and PPh(3)) on the molecular structures in both solid state and solution. Partial dissociation of one of the pyridyl arms in TPMA was not observed when small auxiliary ligands such as CH(3)CN or Br(-) were coordinated to copper(I), but was found to occur with larger ones such as PPh(3) or 4,4'-dipyridyl. All complexes were found to adopt a distorted tetrahedral geometry, with the exception of [Cu(I)(TPMA)][BPh(4)], which was found to be trigonal pyramidal because of stabilization via a long cuprophilic interaction with a bond length of 2.8323(12) ?. Copper(II) complexes with the general formula [Cu(II)(TPMA)X][Y] (X = Cl(-), Br(-) and Y = ClO(4)(-), BPh(4)(-)) were also synthesized to examine the effect of different counterions on the geometry of [Cu(II)(TPMA)X](+) cation, and were found to be isostructural with previously reported [Cu(II)(TPMA)X][X] (X = Cl(-) or Br(-)) complexes.     

Asymmetric sulfur atom coordination in a copper(II) dipicolylamine (DPA) complex with a thioglycoside ligand

The 2,2'-dipicolylamine (DPA)-tethered thioglycoside ligand, N,N-bis(2-pyridylmethyl)-2-aminoethyl 1-deoxy-1-thio-2,3,4,6-tetra-O-acetyl-beta-d-glucopyranoside (sL1), has been prepared and its copper(II) complex synthesized. Using copper(II) chloride, the copper complex was isolated as a chloride-bound species formulated as [Cu(sL1)Cl(ClO(4))](1). The corresponding O-glycoside complex ([Cu(L1)Cl](ClO(4)), 2) was also prepared using L1 (N,N-bis(2-pyridylmethyl)-2-aminoethyl 2,3,4,6-tetra-O-acetyl-beta-d-glucopyranoside), and both complexes were characterized and compared by means of X-ray crystallography, cyclic voltammetry, electronic absorption and circular dichroism (CD) spectra. Although both complexes exhibited similar copper coordination geometries, the absolute configuration of the O/S chiral center generated by the copper coordination was inverted. The electronic and CD spectra of acetonitrile solutions of 1 and 2 were different likely due to the presence of a copper-sulfur charge-transfer band for 1. Complex also exhibits a large Cotton effect around 700 nm. The corresponding d-d transition of the copper(II) center reveals that the asymmetric copper-sulfur (oxygen) coordination remains even in solution.     

Binuclear copper(II) oxidation products from copper(I) complexes with tridentate ligands. Magnetostructural characterization

The bis-pyridine tridentate ligands (6-R-2-pyridylmethyl)-(2-pyridylmethyl) benzylamine (RDPMA, where R = CH(3), CF(3)), (6-R-2-pyridylmethyl)-(2-pyridylethyl) benzylamine (RPMPEA, where R = CH(3), CF(3)), and the bidentate ligand di-benzyl-(6-methyl-2-pyridylmethyl)amine (BiBzMePMA) have been synthesized and their copper(I) complexes oxidized in a methanol solution to afford self-assembled bis-micro-methoxo-binuclear copper(II) complexes (1, 2, 4, 6) or hydroxo- binuclear copper(II) complexes (3). Oxidation of the nonsubstituted DPMA (R = H) in dichloromethane gives a chloride-bridged complex (5). The crystal structures for [Cu(MeDPMA)(MeO)](2)(ClO(4))(2) (1), [Cu(RPMPEA)(MeO)](2)(ClO(4))(2) (for 2, R= Me, and for 4, R = CF(3)), [Cu(BiBzMePMA)(MeO)](2)(ClO(4))(2) (6), [Cu(FDPMA)(OH)](2)(ClO(4))(2) (3), and [Cu(DPMA)(Cl)](2)(ClO(4))(2) (5) have been determined, and their variable-temperature magnetic susceptibility has been measured in the temperature range of 10-300 K. The copper coordination geometries are best described as square pyramidal, except for 6, which is square planar, because of the lack of one pyridine ring in the bidentate ligand. In 1-4 and 6, the basal plane is formed by two pyridine N atoms and two O atoms from the bridging methoxo or hydroxo groups, whereas in 5, the bridging Cl atoms occupy axial-equatorial sites. Magnetic susceptibility measurements show that the Cu atoms are strongly coupled antiferromagnetically in the bis-methoxo complexes 1, 2, 4, and 6, with -2J > 600 cm(-)(1), whereas for the hydroxo complex 3, -2J = 195 cm(-)(1) and the chloride-bridged complex 5 shows a weak ferromagnetic coupling, with 2J = 21 cm(-)(1) (2J is an indicator of the magnetic interaction between the Cu centers).     

Ligand effect on reversible conversion between copper(I) and bis(mu-oxo)dicopper(III) complex with a sterically hindered tetradentate tripodal ligand and monooxygenase activity of bis(mu-oxo)dicopper(III) complex

A new sterically hindered tetradentate tripodal ligand (Me2-etpy) and its labeled analogue having deuterated methylene groups (d4-Me2-etpy) were synthesized, where Me2-etpy is bis(6-methyl-2-pyridylmethyl)(2-pyridylethyl)amine. Copper(I) complexes [Cu(Me2-etpy or d4-Me2-etpy)]+ (1 and 1-d4, respectively) reacted with dioxygen at -80 degrees C in acetone to give bis(mu-oxo)dicopper(III) complexes [Cu2(O)2(Me2-etpy or d4-Me2-etpy)2](2+) (1-oxo and 1-d4-oxo, respectively), the latter of which was crystallographically characterized. Unlike a bis(mu-oxo)dicopper(III) complex with a closely related Me2-tpa ligand having a 2-pyridylmethyl pendant, 1-oxo possessing a 2-pyridylethyl pendant is not fully formed even under 1 atm of O2 at -80 degrees C and is very reactive toward the oxidation of the supporting ligand. Thermal decomposition of 1-oxo gave an N-dealkylated ligand in yield approximately 80% based on a dimer and a corresponding aldehyde. The deuterated ligand d4-Me2-etpy greatly stabilizes the bis(mu-oxo)dicopper(III) complex 1-d4-oxo, indicating that the rate determining step of the N-dealkylation is the C-H bond cleavage from the methylene group. The reversible conversion between 1-d4 and 1-d4-oxo in acetone is dependent on the temperature, and the thermodynamic parameters (DeltaH and DeltaS) of the equilibrium were determined to be -53 +/- 2 kJ mol(-1) and -187 +/- 10 J mol(-1) K(-1), respectively. The effect of the 2-pyridylethyl pendant in comparison with the 2-pyridylmethyl and 6-methyl-2-pyridylmethyl pendants on the physicochemical properties of the copper(I) and bis(mu-oxo)dicopper(III) species is discussed.     

Copper(I) coordination chemistry of (pyridylmethyl)amide ligands

Copper(I) chloro complexes were synthesized with a family of ligands, HL(R) [HL(R) = N-(2-pyridylmethyl)acetamide, R = null; 2-phenyl-N-(2-pyridylmethyl)acetamide, R = Ph; 2,2-dimethyl-N-(2-pyridylmethyl)propionamide, R = Me3; 2,2,2-triphenyl-N-(2-pyridylmethyl)acetamide, R = Ph3)]. Five complexes were synthesized from the respective ligand and cuprous chloride: [Cu(HL)Cl]n (1), [Cu2(HL)4Cl2] (2), [Cu2(HL(Ph))2(CH3CN)2Cl2] (3), [Cu2(HL(Ph)3)2Cl2] (4), and [Cu(HL(Me)3)2Cl] (5). X-ray crystal structures reveal that for all complexes the ligands coordinate to the Cu in a monodentate fashion, and inter- or intramolecular hydrogen-bonding interactions formed between the amide NH group and either amide C=O or chloro groups stabilize these complexes in the solid state and strongly influence the structures formed. Complexes 1-5 display a range of structural motifs, depending on the size of the ligand substituent groups, hydrogen bonding, and the stoichiometry of the starting materials, including a one-dimensional coordination polymer chain (1) and binuclear (2-4) or mononuclear (5) structures.     

Copper(I) and -(II) complexes of neutral and deprotonated N-(2,6-diisopropylphenyl)-3-[bis(2-pyridylmethyl)amino]propanamide

As part of a study of atom-transfer radical polymerization (ATRP) catalysts, four new copper(I) and -(II) compounds of a new monoanionic, tripodal tetradentate ligand, N-(2,6-diisopropylphenyl)-3-[bis(2-pyridylmethyl)amino]propanamide (DIPMAP), were prepared. Ligand synthesis followed from the addition-elimination reaction of 2,6-diisopropylaniline with acryloyl chloride and then a Lewis acid catalyzed Michael addition of bis(2-pyridylmethyl)amine to this product. The ligand was complexed to CuCl to yield monomeric Cu(DIPMAP)Cl featuring an intramolecular hydrogen bond between the free amide hydrogen and the coordinated chloride ligand. Deprotonation of the amide hydrogen in Cu(DIPMAP)Cl using n-BuLi led to the incorporation of LiCl in the resulting product, Li2Cu2(DIPMAP)2Cl2. This complex exhibited an unusual dimeric structure, with the amine nitrogens of one ligand coordinated to a lithium ion, the amide oxygen of the same ligand bridging between the lithium ions, and the amidate nitrogen of that ligand coordinated to a CuCl unit that has a structure analogous to dihalocuprate ions. Deprotonation of Cu(DIPMAP)Cl using KOtBu yielded an alkali-metal chloride free product, Cu2(DIPMAP)2, that also exhibited a dimeric structure in which the three amine nitrogens of one ligand were coordinated to one CuI ion and the amidate nitrogen of the same ligand was coordinated to the other CuI ion. Cu2(DIPMAP)2 was effective in abstracting halogen atoms from organic halides, but in the attempted ATRP of tert-butyl acrylate, molecular weight versus conversion behavior reminiscent of a redox-initiated polymerization was observed. DIPMAP was coordinated to CuBr2 to yield [Cu(DIPMAP)Br]Br with a square-pyramidal structure. The amide hydrogen in this complex could be deprotonated using KOtBu to form complex [DIPMAP]CuBr. Spectral characterization of complex confirmed deprotonation of the ligand and that it most likely had an axially distorted trigonal-bipyramidal structure, although crystals suitable for X-ray analysis could not be obtained. Solution oxidation of Cu2(DIPMAP)2 using CBr4 yielded a product, complex, whose spectral signatures did not match those of complex. The dimeric structure of Cu2(DIPMAP)2 might be a significant contributing factor to the slow rate of deactivation observed in atom-transfer reactions using Cu2(DIPMAP)2 as the catalyst.     

Coordination polymers of copper(I) halides and neutral heterocyclic thiones with new coordination modes

Reaction of copper(I) chloride or bromide with equimolar amounts of the neutral pyrimidine-2-thione ligand (pymtH) afforded linear chain polymers [Cu(pymtH)X]n (X = Cl, Br) with the pymtH ligand acting as a bridging N, S donor. In contrast, copper(I) iodide under the same conditions gave the dimeric complex [Cu(pymtH)2I]2 with the pymtH ligand adopting monodentate coordination mode through the exocyclic sulfur atom in terminal and bridging modes. Reactions of the heterocyclic thione ligand 2,4,6-trimercaptotriazine (H3TMT) with copper(I) halides afforded novel three-dimensional polymers, which crystallized in the cubic space group Pa. Each copper(I) ion is coordinated by three S atoms of three distinct H3TMT ligands, and each H3TMT acts as a tridentate bridging ligand linking three copper(I) ions through its sulfur atoms, thus forming two independent three-dimensional (3D) networks. The network belongs to a three-connected (10, 3)-a topology, which is enantiometric and interpenetrating. In all complexes the ligands are present in the thione form, and all halides are terminally coordinated to copper(I) ions. The photoluminescent and thermal properties of the complexes have also been investigated.     

Site selectivity in the reactions of the hexanuclear platinum cluster [Pt6(mu-PtBu2)4(CO)6][CF3SO3]2

The previously reported hexanuclear cluster [Pt(6)(mu-PtBu(2))(4)(CO)(6)](2+)[Y](2) (1-Y(2): Y=CF(3)SO(3) (-)) contains a central Pt(4) tetrahedron bridged at each of the opposite edges by another platinum atom; in turn, four phosphido ligands bridge the four Pt-Pt bonds not involved in the tetrahedron, and, finally, one carbonyl ligand is terminally bonded to each metal centre. Interestingly, the two outer carbonyls are more easily substituted or attacked by nucleophiles than the inner four, which are bonded to the tetrahedron vertices. In fact, the reaction of 1-Y(2) with 1 equiv of [nBu(4)N]Cl or with an excess of halide salts gives the monochloride [Pt(6)(mu-PtBu(2))(4)(CO)(5)Cl](+)[Y], 2-Y, or the neutral dihalide derivatives [Pt(6)(mu-PtBu(2))(4)(CO)(4)X(2)] (3: X=Cl; 4: X=Br; 5: X=I). Moreover, the useful unsymmetrically substituted [Pt(6)(mu-PtBu(2))(4)(CO)(4)ICl] (6) was obtained by reacting equimolar amounts of 2 and [nBu(4)N]I, and the dicationic derivatives [Pt(6)(mu-PtBu(2))(4)(CO)(4)L(2)](2+)[Y](2) (7-Y(2): L=(13)CO; 8-Y(2): L=CNtBu; 9-Y(2): L=PMe(3)) were obtained by reaction of an excess of the ligand L with 1-Y(2). Weaker nitrogen ligands were introduced by dissolving the dichloride 3 in acetonitrile or pyridyne in the presence of TlPF(6) to afford [Pt(6)(mu-PtBu(2))(4) (CO)(4)L(2)](2+)[Z](2) (Z=PF(6) (-), 10-Z(2): L=MeCN; 11-Z(2): L=Py). The "apical" carbonyls in 1-Y(2) are also prone to nucleophilic addition (Nu(-): H(-), MeO(-)) affording the acyl derivatives [Pt(6)(mu-PtBu(2))(4)(CO)(4)(CONu)(2)] (12: Nu=H; 13: Nu=OMe). Complex 12 is slowly converted into the dihydride [Pt(6)(mu-PtBu(2))(4)(CO)(4)H(2)] (14), which was more cleanly prepared by reacting 3 with NaBH(4). In a unique case we observed a reaction involving also the inner carbonyls of complex 1, that is, in the reaction with a large excess of the isocyanides R-NC, which form the corresponding persubstituted derivatives [Pt(6)(mu-tPBu(2))(4)(CN-R)(6)](2+)[Y](2), (15-Y(2): R=tBu; 16-Y(2) (2-): R=-C(6)H(4)-4-C triple bond CH). All complexes were characterized by microanalysis, IR and multinuclear NMR spectroscopy. The crystal and molecular structures of complexes 3, 5, 6 and 9-Y(2) are also reported. From the redox viewpoint, all complexes display two reversible one-electron reduction steps, the location of which depends both upon the electronic effects of the substituents, and the overall charge of the original complex.     

Tripodal bis(imidazole) thioether copper(I) complexes: mimics of the Cu(M) site of copper hydroxylase enzymes

Tripodal bis(imidazole) thioether ligands, (N-methyl-4,5-diphenyl-2-imidazolyl)2C(OR)C(CH3)2SR' (BIT(OR,SR'); R = H, CH3; R' = CH3, C(CH3)3, C(C6H5)3), have been prepared, offering the same N2S donor atom set as the CuM binding site of the hydroxylase enzymes, dopamine beta hydroxylase and peptidylglycine hydroxylating monooxygenase. Isolable copper(I) complexes of the type [(BIT(OR,SMe))Cu(CO)]PF6 (3a and 3b) are produced in reactions of the respective tripodal ligands 1a (R = H) and 1b (R = Me) with [Cu(CH3CN)4]PF6 in CH2Cl2 under CO (1 atm); the pyramidal structure of 3a has been determined crystallographically. The infrared (IR) nu(CO)'s of 3a and 3b (L = CO) are comparable to those of the Cu(M)-carbonylated enzymes, indicating similar electronic character at the copper centers. The reaction of [(BIT(OH,SMe))Cu(CH3CN)]PF6 (2a) with dioxygen produces [(BIT(O,SOMe))2Cu2(DMF)2](PF6)2 (4), whose X-ray structure revealed the presence of bridging BIT-alkoxo ligands and terminal -SOMe groups. In contrast, oxygenation of 2b (R = Me) affords crystallographically defined [(BIT(OMe,SMe))2Cu2(mu-OH)2](OTf)2 (5), in which the copper centers are oxygenated without accompanying sulfur oxidation. Complex 5 in DMF is transformed into five-coordinate, mononuclear [CuII(BIT(OMe,SMe))(DMF)2](PF6)2 (6). The sterically hindered BIT(OR,SR') ligands 9 and 10 (R' = t-Bu; R = H, Me) and 11 and 12 (R' = CPh3; R = H, Me) were also prepared and examined for copper coordination/oxygenation. Oxygenation of copper(I) complex 13b derived from the BIT(OMe,SBu-t) ligand is slow, relative to 2b, producing a mixture of (BIT(OMe,SBu-t))2Cu2(mu-OH)2-type complexes 14b and 15b in which the -SBu-t group is uncoordinated; one of these complexes (15b) has been ortho-oxygenated on a neighboring aryl group according to the X-ray analysis and characterization of the free ligand. Oxygenation of the copper(I) complex derived from BIT(OMe,SCPh3) ligand 12 produces a novel dinuclear disulfide complex, [(BIT(OMe,S)2Cu2(mu-OH)2](PF6)2 (17), which is structurally characterized. Reactivity studies under anaerobic conditions in the presence of t-BuNC indicate that 17 is the result of copper(I)-induced detritylation followed by oxygenation of a highly reactive copper(I)-thiolate complex.     

Reaction behaviour of dinuclear copper(I) complexes with m-xylyl-based ligands towards dioxygen

Intramolecular ligand hydroxylation was observed during the reactions of dioxygen with the dicopper(I) complexes of the ligands L(1)(L(1)=alpha,alpha'-bis[(2-pyridylethyl)amino]-m-xylene) and L(3)(L(3)=alpha, alpha'-bis[N-(2-pyridylethyl)-N-(2-pyridylmethyl)amino]-m-xylene). The dinuclear copper(I) complex [Cu(2)L(3)](ClO(4))(2) and the dicopper(II) complex [Cu(2)(L(1)-O)(OH)(ClO(4))]ClO(4) were characterized by single-crystal X-ray structure analysis. Furthermore, phenolate-bridged complexes were synthesized with the ligand L(2)-OH (structurally characterized [Cu(2)(L(2)-O)Cl(3)] with L(2)=alpha, alpha'-bis[N-methyl-N-(2-pyridylethyl)amino]-m-xylene; synthesized from the reaction between [Cu(2)(L(2)-O)(OH)](ClO(4))(2) and Cl(-)) and Me-L(3)-OH: [Cu(2)(Me-L(3)-O)(mu-X)](ClO(4))(2)xnH(2)O (Me-L(3)-OH = 2,6-bis[N-(2-pyridylethyl)-N-(2-pyridylmethyl)amino]-4-methylphenol and X = C(3)H(3)N(2)(-)(prz), MeCO(2)(-) and N(3)(-)). The magnetochemical characteristics of compounds were determined by temperature-dependent magnetic studies, revealing their antiferromagnetic behaviour [-2J(in cm(-1)) values: -92, -86 and -88; -374].     

Synthesis and characterization of copper(I) halide/pseudohalide adducts of 2-benzoylpyridine and x-ray crystal structure of [di-μ-iodo-bis(N,O-2-benzoylpyridine)dicopper(I)]

Dark-brown copper(I) complexes of the type CuXL, for X = Cl, Br, I, SCN and N₃, and orange-yellow complexes of the type (CuX)₂L, for X = Cl or Br, where L = 2-benzoylpyridine, have been prepared and characterized. All complexes exhibit strong CT bands in the visible region and gave non-conducting solutions in acetone and nitrobenzene. The IR spectral data suggest that 2-benzoylpyridine acts as a monodentate ligand in the orange-yellow complexes and as a bidentate chelating ligand in the brown complexes, whereas bridging halides and pseudohalides exist in both types. The structure of the 1 : 1 black iodide complex, as determined by X-ray crystallography, features a discrete, centrosymmetric [CuI(2-benzoylpyridine)]₂ molecule with a short CuCu distance of 2.587(1) Å. Each copper atom in the dimeric molecule is tetrahedrally coordinated by two μ-iodine atoms and the carbonyl oxygen and nitrogen atoms of the chelating 2-benzoylpyridine ligand. The orange-yellow complexes display visible emission when excited in the UV region, whereas the brown complexes do not.     

C(arenium)-C(alkyl) bond making and breaking: key process in the platinum-mediated C(aryl)-C(alkyl) bond formation. Analogies to organic electrophilic aromatic substitution

The reaction of cationic platinum aqua complexes 2 [Pt(C(6)H(2)[CH(2)NMe(2)](2)-E-4)(OH(2))](X') (X' = SO(3)CF(3), BF(4)) with alkyl halides RX gave various air-stable arenium complexes 3-5 containing a new C-C bond (R = Me, 3; Et, 4; Bn, 5). Electron-releasing oxo-substituents on the aromatic ligand (E = e.g., OH, b; OMe, c) enhance the reactivity of the aqua complex 2 and were essential for arenium formation from alkyl halides different from MeX. This process is initiated by oxidative addition of alkyl halides to the platinum(II) center of 2, which affords (alkyl)(aryl) platinum(IV) complexes (e.g., 9, alkyl = benzyl) as intermediates. Spectroscopic analyses provided direct evidence for a subsequent reversible 1,2-sigmatropic shift of the alkyl group along the Pt-C(aryl) bond, which is identical to repetitive C(arenium)-C(alkyl) bond making and breaking and concerted metal reduction and oxidation. Temperature-dependent NMR spectroscopy revealed DeltaH degrees = -1.3 (+/- 0.1) kJ mol(-1), DeltaS degrees = +3.8 (+/- 0.2) J mol(-1) K(-1), and DeltaG degrees (298) = -2.4 (+/- 0.1) kJ mol(-1) for the formation of the arenium complex 5b from 9 involving the migration of a benzyl group. The arenium complexes were transformed to cyclohexadiene-type addition products 7 or to demetalated alkyl-substituted arenes, 8, thus completing the platinum-mediated formation of a sp(2)-sp(3) C-C bond which is analogous to the aromatic substitution of a [PtX](+) unit by an alkyl cation R(+). The formation of related trimethylsilyl arenium complexes 6 suggests arenium complexes as key intermediates, not only in (metal-mediated) sp(2)-sp(3) C-C bond making and breaking but also in silyl-directed cyclometalation.     

Synthesis, characterization, and DFT studies of thione and selone Cu(I) complexes with variable coordination geometries

Coordination of Cu(I) halides with N,N'-dimethylimidazole selone (dmise) and thione (dmit) ligands was examined by treating CuX (X = Cl, Br, I) with one or two equivalents of dmise or dmit. The reaction of CuI and CuBr with one molar equivalent of dmise results in unusual selenium-bridged tetrameric Cu(4)(μ-dmise)(4)(μ-X)(2)X(2) copper complexes with average Cu-Se bond lengths of 2.42 ? and a Cu(2)(μ-X)(2) core (X = I (1) or Br (6)) that's in a rhomboidal structure. The reaction of CuX (X = Cl, Br, and I) with two equivalents of dmit or dmise results in trigonal planar Cu(I) complexes of two different conformations with the formula Cu(dmit)(2)X (3a, 3b, 4, and 7) or Cu(dmise)(2)X (2, 5, and 8) with average Cu-S and Cu-Se bond lengths of 2.23 ? and 2.34 ?, respectively. The coordination geometry around the copper center in complexes 1 to 8 is determined by the type of halide and chalcogenone ligand used, intramolecular π-π interactions, and short contact interactions between X-H (X = I, Br, Cl, Se or S). The theoretical DFT calculations are in good agreement with experimental X-ray structural data and indicate that dmise ligands are required for formation of the tetrameric complexes 1 and 6. Electrochemical studies show that the trigonal copper selone complexes have more negative potentials relative to analogous copper thione complexes by an average of 108 mV.     

Stable gold(III) complexes with thiosemicarbazone derivatives

Novel thiosemicarbazonato complexes of gold(III) have been prepared from reactions of [Au(damp-C1,N)Cl2(damp- = 2-(N,N-dimethylaminomethyl)phenyl) or [NBu4][AuCl4] with 2-pyridineformamide thiosemicarbazones (HL). The thiosemicarbazones deprotonate and coordinate as mononegative, tridentate NNS ligands to gold to give [Au(Hdamp-C1)(L)]Cl2 or [AuCl(L)]Cl complexes. The organometallic damp- ligand is protonated during the reactions and the Au-N bond is cleaved. The [AuCl(L)]+ cations represent the first gold(III) complexes with thiourea derivatives which are not stabilised by an additional organometallic ligand. Reactions of [NBu4][AuX4](X = Cl, Br) with diphenylthiocarbazone (dithizone) result in reduction of the metal and the formation of gold(I) complexes of the composition [AuX(SCN4-3,4-Ph2)] where SCN4-3,4-Ph2 is 3,4-diphenyltetrazole thione which is formed from cyclisation of dithizone.     

Binuclear and polymeric Hg(II) complexes of an ambidentate phosphorus ylide: Synthesis,crystal structure,antibacterial activity,and theoretical studies

The new α-keto-stabilized phosphorus ylide Ph₃PCHC(O)PhCN ( Y ) was synthesized by addition of triphenylphosphine to 2-bromo-4′-cyanoacetophenone, followed by treatment with NaOH 10%. Reaction of ligand ( Y ) with methanolic solution of mercury(II) halides under mild conditions yielded the binuclear complexes [Y·HgX₂]₂ [X=Cl ( 1 ), Br ( 2 ), I ( 3 )]. The new organic/inorganic composite polymer [Hg(NO₃)₂(Y)]_n ( 4 ) was synthesized by the reaction of mercury(II) nitrate with the phosphorus ylide Y . Compounds synthesized were characterized by Fourier-transform infrared, ¹H, ³¹P, and ¹³C nuclear magnetic resonance spectroscopic methods, which confirmed the coordination of ylide to the metal center through the ylidic carbon atom. Single-crystal X-ray structures of phosphorus ylide Y and polymeric complex 4 were also determined and the crystallographic data of complex 4 showed that the title complex has an infinite one-dimensional structure. Furthermore, the electronic and molecular structures of complexes 1 – 3 were investigated at the BP86/def2-SVP level of theory, indicating an increasing trend for C→M bond lengths: Hg₂I₂ > Hg₂Br₂ > Hg₂Cl₂ in [Y→HgX₂]₂ (X = Cl, Br, I) complexes. In addition, the antibacterial activity of ligand Y and all complexes using the agar disc diffusion method was examined against both selected gram-positive and gram-negative bacteria. Results indicated that the ligand Y and complexes 1 and 4 show good antibacterial effect against gram-positive bacteria tested; besides, the inhibition zones of complexes were significantly larger than those of chloramphenicol as standard.     

Tetraphosphinitoresorcinarene complexes: cationic silver(I) and copper(I) halide complexes as mercurate(II) anion receptors

The reactions of mercury(II) halides with the tetraphosphinitoresorcinarene complexes [P4M5X5], where M=Cu or Ag, X=Cl, Br, or I, and P4=(PhCH2CH2CHC6H2)4(O2CR)4(OPPh2)4 with R=C6H11, 4-C6H4Me, C4H3S, OCH2CCH, or OCH2Ph, have been studied. The reactions of the complexes with HgX2 when M=Ag and X=Cl or Br occur with elimination of silver(I) halide and formation of [P4Ag2X(HgX3)], but when M=Ag and X=I, the complexes [P4Ag4I5(HgI)] are formed. When M=Cu and X=I, the products were the remarkable capsule complexes [(P4Cu2I)2(Hg2X6)]. When M=Ag and X=I, the reaction with both CuI and HgI2 gave the complexes [P4Cu2I(Hg2I5)]. Many of these complexes are structurally characterized as containing mercurate anions weakly bonded to cationic tetraphosphinitoresorcinarene complexes of copper(I) or silver(I) in an unusual form of host-guest interaction. In contrast, the complex [P4Ag4I5(HgI)] is considered to be derived from an anionic silver cluster with an iodomercury(II) cation. Fluxionality of the complexes in solution is interpreted in terms of easy, reversible making and breaking of secondary bonds between the copper(I) or silver(I) cations and the mercurate anions.     

Synthesis and characterisation of benzyl phosphino-thioether and -thiolato Pd(II) complexes and their applications in Suzuki coupling reactions

The synthesis of the benzyl phosphinothioether derivatives Ph(2)PCH(2)CH(Et)SR and their corresponding palladium complexes are reported, where R = CH(2)Ph, R = CH(2)-3,5-Me-C(6)H(3) and R = 1-CH(2)C(10)H(7)(5). Crystallographic data obtained for the complexes Pd(3)Cl(2) and Pd(4)Cl(2) show intra- and inter-molecular pi-pi interactions between the aromatic rings on the P and S substituents, and NOE experiments for Pd(4)Cl(2) show that these interactions persist in solution. The performance of the phosphinothioether palladium complexes in aryl-aryl cross-coupling reactions is compared with that of the corresponding complex of the parent phosphinothiolato ligand Ph(2)PCH(2)CH(Et)S(-)(1). High turnover numbers up to 2000000 are reported for the coupling of bromobenzene, using the palladium dimer [Pd(1)I](2) as the catalyst precursor. Kinetic studies show a linear dependence of the reaction on catalyst loading. The effect of other variables on the cross-coupling reaction, such as temperature, solvent and base, is also reported.     

Copper(I) and mercury(II) halide complexes of 1,2-bis(diphenylthioylphosphino)hydrazine

The reaction of 1,2-bis(diphenylthioylphosphino)hydrazine (L) with copper(I) and mercury(II) halides affords the complexes, [{CuLX}₂] (X = I, Br or Cl), [HgLX₂] (X = Cl or Br) and the tetrametallic complex, [{L(HgI₂)₂}₂]. Single crystal X-ray structures have been performed on the uncoordinated ligand, L, as well as the complexes [{CuLX}₂] (X = I, Br and Cl), [HgLBr₂] and [{L(HgI₂)₂}₂. The molecules of L exist as dimers as a result of pairs of N–HS hydrogen bonds. The copper(I) complexes are centrosymmetric dimetallic species, the two copper atoms being bridged by L and the X atoms. In all cases the coordination sphere around the Cu atoms is approximately trigonal pyramidal with an ‘S₂X₂’ donor set. The complex, [HgLBr₂], is a distorted tetrahedral monomer with an ‘S₂Br₂’ donor set and L acting as a bidentate thus forming a seven-membered chelate ring. The tetramercury iodo complex, [{L(HgI₂)₂}₂], contains two ‘L(HgI₂)₂’ units linked centrosymmetrically via an I atom from each moiety. The geometry around the Hg atoms is distorted tetrahedral. The influence of hydrogen bonding between the hydrazine backbone hydrogens of L and the coordinated halide ions in for the structures of the metal complexes is discussed.