血红素蛋白质-琼脂糖膜修饰电极的表征和电催化特性

利用琼脂糖(agarose)水凝胶将肌红蛋白(Mb)、血红蛋白(Hb)、辣根过氧化物酶(HRP)和过氧化氢酶(Cat)4种血红素蛋白质固定在裂解石墨电极表面,形成稳定的血红素蛋白质-agarose膜修饰电极.用紫外-可见和红外光谱及原子力显微法对血红素蛋白质-琼脂糖膜修饰电极进行了表征.紫外-可见和红外光谱显示,在琼脂糖凝胶中,血红素蛋白质保持原始构象.溶液的pH(3.0～10.0)可逆地改变血红素蛋白质的构象,从而影响其光谱性质.原子力显微图象表明血红素蛋白质与agarose水凝胶之间存在较强的作用.研究了血红素蛋白质催化还原O2、H2O2的机理.稳定的血红素蛋白质-agarose修饰电极能运用于H2O2的定量测定.     

碳纳米管促进氧化还原蛋白质和酶的直接电子转移

将血红蛋白(Hb)、辣根过氧化物酶(HRP)和葡萄糖氧化酶(GOx)分别固定在经碳纳米管修饰的玻碳电极(CNT/GC)上,制成Hb CNT/GC、HRP CNT/GC和GOx CNT/GC电极.Hb、HRP和GOx在CNT/GC电极表面均能发生有效和稳定的直接电子转移反应,其相应的循环伏安曲线均显示出一对几近对称的氧化还原峰;在60mV/s下,其式量电位E0'分别为-0.343V、-0.319V和-0.456V(vs.SCE,pH6.9),且不随扫速而变;以上三者在CNT/GC电极表面直接电子转移的表观速率常数ks依次为1.25±0.25、2.07±0.56和1.74±0.42s-1;根据式量电位E0'随缓冲溶液pH值的变化关系,确知在CNT/GC电极上,Hb或HRP发生的直接电化学遵从(1e+1H+)电极过程机理,而GOx发生的直接电化学反应则遵从(2e+2H+)机理.此外,固定在CNT/GC电极表面的Hb、HRP和GOx也同时表现出对各自底物的生物电催化活性.由本文制备的碳纳米管修饰电极及其固定生物蛋白质(酶)的方法具有简单、易于操作等优点,并可用于对其它生物氧化还原蛋白质和酶的直接电子转移测试.     

红外光谱和圆二色光谱研究氰根配位的辣根过氧化物酶（HRP）的热伸展过程

典型的辣根过氧化物酶同功酶C（HRP）是用于过氧化物酶生物化学研究的原型酶。HRP的血红素辅基的铁是五配位的,血红素口袋的远端和近端位点都存在一个氢键网络。HRP结构的稳定性已用随温度变化的FTIR光谱法^[1]和圆二色及荧光光谱法^[2]进行了研究,并与细胞色素c过氧化物酶进行了比较。HRP的氰根加合物的活性位点的动力学稳定性和分子结构也用二维核磁共振法进行了表征^[3]。但是关于氰根配体对HRP在热伸展过程中的结构影响未见到报道。本文用傅里叶变换红外光谱（FTIR）和圆二色（CD）光谱法详细研究了氰根配位的HRP随温度的热伸展过程。研究发现氰根（CN－）取代后,酶中血红素铁的自旋状态和配位状态都与天然态完全不同,氰根取代水分子成为血红素Fe(Ⅲ）的第六配体,这时血红素周围的氢键也会遭受一定程度的破坏,从而使HRP的热稳定性急剧下降。FTIR和Soret-CD的光谱分析表明HRP－CN的热变性过程与天然态HRP完全不同,其途径可表示为：Ⅰ→Ⅰ′→U→A,存在二级和三级结构同时部分破坏的伸展中间态（Ⅰ′）和完全伸展后蛋白质的聚集态（A）。     

PAOAA修饰金电极固定过氧化氢酶的电化学研究

设计了一种基于金属离子螯合法固定蛋白质的新方法.首先电化学聚合苯胺(ANI)/邻氨基苯甲酸(OAA)得到在中性溶液中具有导电性的聚(苯胺-邻氨基苯甲酸)(PAOAA)共聚物膜,并对膜进行了SEM、EDS表征.随后膜负载Cu2+,Cu2+作为螯合离子通过配位作用固定过氧化氢酶(Cat).用EDS测量了铜的负载量为0.49%.脉冲伏安法(DPV)研究了Cat在金电极表面的固定过程,显示随着ANI/OAA在电极表面聚合成膜、Cat在修饰电极表面固定,电极在10mmol/LK3Fe(CN)6/K4Fe(CN)6(Fe(CN)63-/4-)溶液中的扫描峰电流由裸电极的121μA依次降到92.6、71.8μA,表明电极表面修饰的PAOAA膜和固定的Cat阻碍了电荷的传递.电化学阻抗法(EIS)对固定过程中电极表面阻抗变化的研究也得到同样结论.用线性扫描伏安法(LSV)研究了固定到电极表面后Cat对H2O2的催化还原活性.最后以计时电流法(CA)作为检测手段,Cat修饰电极作为探针实现了对H2O2的定量检测,同时该电极显示出良好的重建性.     

血红蛋白的过氧化物酶催化特性研究

探讨了用血红蛋白（Hb)作为辣根过氧化物酶（HRP）的替代物，用于率H2O2氧 化对甲基酚的反应体系，研究了血红蛋白的过氧化物酶特征及其酶催化动力学特性 。稳态速率法测定了米氏常数（Km)、米氏速率（Vm)及反应级数等动力学参数。讨 论了对甲基酚作为血红蛋白的氢供体底物的酶催化反应机理，确立了反应速率方程 。实验比较发现血红蛋白作为过氧化物酶（HRP）的替代物，其催化活性比氯化血 红素（Hemin)，β-环糊精－氯化血红素（β－CD－Hemin)等过氧化物模拟酶要高。     

酶的光谱电化学研究（Ⅰ）：辣根过氧化物酶的电化学性质

利用薄层光谱电化学技术研究了辣根过氧化物酶(HRP)及其化合物的氧化还原过程。指出HRP可在固体电极上进行直接电子传递,该电极反应不是酶中二硫键的还原,而是血红素辅基中心金属离子的氧化态转变。测定了HRP(Fe~(3+)/Fe~(2+))电对的标准氧化还原电位和电化学动力学参数,讨论了HRP氧化性中间物的电化学性质。     

层层自组装法制备碳纳米管/酶多层膜电极及其检测酚类物质

将十二烷基硫酸钠（SDS）分散的碳纳米管(CNTs)和辣根过氧化物酶(HRP)通过层层组装方法构筑HRP多层膜酶电极,并将其用于酚类物质的分析检测研究。紫外-可见光谱表明,SDS分散的CNTs可与HRP均匀有效地组装构筑多层酶膜。电化学研究表明,CNTs的引入很好地提高了HRP电极的灵敏度;随着CNTs/HRP组装层数的增加,电极的电化学响应增加。研究结果表明该HRP电极对酚类物质（邻苯二酚、对苯二酚和苯酚）的分析检测具有宽的线性范围、好的灵敏度和抗干扰性。     

基于室温离子液体和有序大孔金膜的酶传感器

将室温离子液体1-丁基-3-甲基咪唑四氟硼酸盐([BMIM]BF4)、N,N-二甲基甲酰胺(DMF)、及不同种类的膜材料与各种酶一起通过混合涂布、逐层修饰的方式固定于三维有序大孔金膜电极表面,构建一种新型的生物酶传感器。血红蛋白(Hb)、肌红蛋白(Mb)和辣根过氧化物酶(HRP)在该修饰电极上呈现出明显的还原峰,这归因于三种酶活性中心的直接电化学行为。分别构建四种不同膜材料的修饰电极,研究了硅凝胶、壳聚糖、Nafion膜和琼脂糖水凝胶四种材料对于L-乳酸脱氢酶(LDH)修饰电极催化响应的影响,结果表明选择壳聚糖作为膜材料是最优选择。将壳聚糖修饰的LDH金膜电极用做检测乳酸浓度的生物传感器,该传感器表现出良好的催化性能,线性响应范围为10~250nmol/L,检测限(S/N=3)为3.3nmol/L。     

辣根过氧化物酶的电化学固定化及其对H2O2的生物电催化还原作用

利用电化学固定化方法制备了聚吡咯/辣根过氧化物酶(PP/HRP)膜电极,并研究了其电化学行为。在除氧的磷酸盐缓冲液介质中,PP/HRP电极加速H₂O₂的还原,归因于酶加成物的直接电子传递。探索HRP与电子传递体K₄Fe(CN)₆在聚吡咯(PP)膜中的同时固定化条件及其膜电极的电化学行为,实验证实,K₄Fe(CN)₆在酶膜中的存在使得H₂O₂的还原电位强烈正移,在-0.05V的工作电位下能对H₂O₂进行检测,相应的电极过程可用间接氧化还原催化机理解释。     

糖蛋白-凝集素自组装构筑有序膜及在酶电极的应用

利用糖蛋白-凝集素的识别作用交替沉积伴刀豆球蛋白（Con A）与辣根过氧化物酶(HRP)制备酶自组装多层膜，用原子力显微镜（AFM）观测了自组装膜的表面形貌、表面粗糙度； AFM和椭圆偏振研究测定了自组装膜的厚度.结果表明, Con A和HRP膜厚分别为9.0和4.6 nm，与两者的晶体衍射结果一致，说明生物识别自组装方法能很好地保持分子的原有形态.以亚甲蓝（MB）溶液为介体，用循环伏安法测定了表面修饰了三层（Con A/HRP）自组装膜的金电极对H2O2的电化学催化还原作用，在H2O2浓度为0.2～1.0 mmol•L－1时，响应电流对H2O2浓度变化成线性，酶电极灵敏度为24.0 mA•mol－1•L，表观米氏常数为4.2 mmol•L－1.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.