Magnetization reversal in a novel gradient nanomaterial

The deposition of Co/Pd multilayer films onto self-assembled particle arrays with particle sizes down to 50 nm leads to pronounced curvature-induced physical properties. Unlike in classical nanosystems, the so-formed single caps on top of the spherical particles exhibit a radial symmetric anisotropy orientation across their surface. Its impact on the magnetization reversal process was analyzed experimentally for different particle sizes and compared to micromagnetic simulations, offering new opportunities in the functionalization of magnetic nanostructures.     

Magnetization reversal in granular thin films

The paper discusses the physics of magnetization reversal in granular magnetic films. It gives an overview of the key physical properties that determine the collective and macroscopically observable magnetization reversal behavior. In particular, the multitude of observable hysteresis loops is reduced to three key physical quantities, namely the single grain switching field distribution D(h_s), the inter-granular exchange coupling constant J_ex, and the magnetostatic interaction constant J_ms. By varying the relative influence of these quantities, many different shapes of hysteresis loops can occur, which is documented by experimental examples. The regime of partially and strongly correlated reversal is discussed in detail, and minor loop measurements are presented that show scaling behavior for strongly correlated magnetization reversal in the vicinity of hysteresis loop criticality.     

Magnetization reversal processes in FeSm thin films

We have investigated the in-plane magnetization reversal in FeSm thin films and discovered that it can be controlled through an induced anisotropy. For films with an induced easy direction, reversal is ultra fast and can be characterized approximately using the Fatuzzo model. In films with no pronounced induced easy axis, the reversal is much slower and can be described using a logarithmic model. We have also investigated the short time (1–50 s) dependence of the remanent coercivity and fitted to logarithmic equations. For films with no pronounced easy axis, the time dependence of the coercivity correlates with the film thickness, indicating that the switching volume scales with thickness. For films with an induced easy direction, the time dependence of the coercivity is essentially constant, independent of film thickness, indicating no scalable switching volume.     

Magnetization reversal in weakly coupled magnetic patterns

Ion irradiation is an original process to pattern the structural and as a consequence the magnetic properties of ultra-thin films, down to the nanometer scale. Patterns of dots and tracks have been fabricated by focused Ga⁺ ion beam scanned onto a Co layer with perpendicular magnetic anisotropy. Depending on the dose, the magnetic behaviour of the nanometric irradiated lines can be tuned from the ferromagnetic with reduced coercivity to paramagnetic. The larger the fluence, the smaller is the exchange between dots or tracks. These systems enabled investigations of the competition between exchange and dipolar interactions. For arrays designed with high irradiation doses and only coupled by dipolar interactions, the magnetic relaxation proceeds by the magnetization reversal of individual dots and follows a power-law time decay. Monte Carlo simulations reproduce this time dependence.     

Magnetization reversal in amorphous ribbons studied by neutron depolarization

The magnetization process in an amorphous ribbon with an easy axis perpendicular to its plane has been studied with the three-dimensional neutron depolarization technique. A simplified model of three layers is used, describing the magnetization distribution in the bulk and the two closure domain structures at the surface. Our analysis with this model gives direct experimental evidence that the magnetization process due to an applied magnetic field in the ribbon plane is dominantly accounted for by rotation processes of the local magnetization in the bulk. The influence of different types of closure domain structures on the magnetization distribution during the reversal process are discussed and compared with the experimental results.     

Magnetization reversal dynamics in Co nanowires with competing magnetic anisotropies

We present the magnetization reversal dynamics of Co nanowires with competing magnetic anisotropies. The aspect ratio (R) of the nanowires is varied between 2.5 and 60, and we observe a cross-over of the directions of the magnetic easy and hard axes at R=6.8. Micromagnetic simulations qualitatively reproduce the observed cross-over and give detailed insight into the reversal mechanisms associated with the cross-over. The reversal mechanism for a field applied along the long axis of the nanowire exhibits a quasi-coherent rotation mode and a corkscrew-like mode, respectively, above and below the cross-over, with the formation of a Bloch domain near the cross-over region. For a field applied along the short axis, the reversal occurs by nucleation and propagation of reversed domains from the two ends of the nanowires for very high values of the aspect ratio down to the cross-over region, but it transforms into quasi-coherent rotation mode for smaller aspect ratios (below the cross-over region).     

Magnetization reversal mechanism of magnetic tunnel junctions

Using the ion-beam-sputtering technique,we have fabricated Fe/Al2O3/Fe magnetic tunnelling junctions (MTJs).We have observed double-peaked shapes of curves,which have a level summit and a symmetrical feature,showing the magnetoresistance of the junction as a function of applied field.We have measured the tunnel conductance of MTJs which have insulating layers of different thicknesses.We have studied the dependence of the magnetoresistance of MTJs on tunnel conductance.The microstructures of hard-and soft-magnetic layers and interfaces of ferromagnets and insulators were probed.Analysing the influence of MJT microstructures,including those having clusters or/and granules in magnetic and non-magnetic films,a magnetization reversal mechanism(MRM) is proposed,which suggests that the MRM of tunnelling junctions may be explained by using a group-by-group reversal model of magnetic moments of the mesoscopical particles.We discuss the influence of MTJ microstructures,including those with clusters or/and granules in the ferromagnetic and non-magnetic films,on the MRM.     

The structure and magnetic properties of amorphous magnetic thin films

A review of the structural and magnetic properties of amorphous ferromagnetic and ferrimagnetic thin films is presented. An attempt is made to report structural information on atomic and microstructural scales, and to stress its relevance to the magnetic properties of these materials. The more obvious microstructural features of deposited films are not present in the other important type of amorphous magnetic material prepared by rapid quenching from the melt, and present opportunities for differences in structure dependent magnetic properties. In the main, three classes of amorphous magnetic films are considered. Ferromagnetic transition metal (TM) films which are metastable only at temperatures well below room temperature are discussed. Their importance lies in the fact that they clearly represent the most fundamental amorphous phase. Ferromagnetic transition metal-metalloid (TM-Me) alloys have potential applications as magnetically soft materials. These alloys are, perhaps, the most studied amorphous magnetic materials both in deposited thin film and rapidly quenched ribbon forms. Finally, amorphous rare earth-transition metal (RE-TM) films are reviewed. They exhibit a wide variety of magnetic properties encompassing both extremely low and very high coercivities and also perpendicular magnetic anisotropy. The possible application of these materials in various types of device has encouraged much detailed research into their magnetic properties. This has highlighted the importance of preparation conditions and microstructure in defining their properties.     

Magnetization distribution in magnetic films studied with Larmor-encoding

Additional information about the magnetization distribution in magnetic films is obtained with a 3D-polarimetry set-up. A pilot experiment was performed with the neutron polarization aligned perpendicular to the surface of a Fe-film in a magnetic field parallel to its surface. The Larmor-precession in the magnetic field between two current sheets was used to adjust the neutron polarization perpendicular to the sample surface. This new polarization-magnetization configuration was probed with a Fe-film in specular and off-specular scattering. The off-specular scattering is created by the magnetic domain structure of the Fe-film in remanence. The results of specular and off-specular scattering are reproduced by calculations for the configuration of the incoming neutron polarization parallel to the sample surface and the magnetic field and for the configuration of the incoming neutron polarization perpendicular to the sample surface and the magnetic field.     

Thickness-dependent magnetization reversal in CoZrNb amorphous films

Structure and magnetization of CoZrNb amorphous films prepared by DC magnetron sputtering have been studied as a function of film thickness (t), from 35 to 840 nm. Using comprehensive characterization, we show that the CoZrNb amorphous films possess a single phase and no nanocrystalline can be detected. The magnetic measurements indicate that the magnetization reversal of CoZrNb films is strongly dependent on t. That is, the coercivity is abruptly reduced to be lower than 4 Oe with t increasing from 35 to 105 nm, and then gradually decreases to ∼0.2 Oe as t increases. This coercivity transition versus t is accompanied by the strong magnetization reversal when t is larger than 105 nm. The results reveal that CoZrNb amorphous films with comparatively large film thickness (>100 nm) are suitable for sensors and anti-faked materials.     

Magnetization reversal measurements in mesoscopic amorphous magnets by magneto-optical Kerr effect

A magneto-optical setup based on the transverse Kerr effect has been designed to study the magnetization reversal processes by vector magnetometry in arrays of magnetic nanostructures with a reduced total volume. This system allows the measurement of both the parallel and perpendicular to the field components of the magnetization. It has been used to analyze the behavior of amorphous Co _x Si_1-x lines fabricated by electron beam lithography that present a very well defined shape induced uniaxial anisotropy. When the field is applied near to the hard direction, coherent rotation processes are found to occur with a collapse of this reversal mode at fields very close to the hard axis that allows to estimate the very low anisotropy dispersion of these samples. The analysis of the vector hysteresis loops reveals that the magnetization switches via an incoherent process that starts prior to the Stoner-Wohlfarth instability and that can be described in terms of a localized curling-like reversal mode.Received: 16 June 2004, Published online: 24 September 2004PACS: 75.75. + a Magnetic properties of nanostructures - 75.60.Jk Magnetization reversal mechanisms - 75.50.Kj Amorphous and quasicrystalline magnetic materials     

Magnetization reversal in magnetic nanostripes via Bloch wall formation

We present results of micromagnetic simulations of the magnetization reversal in permalloy nanostripes with 5-10 nm thickness and 200-500 nm width under a longitudinal field of 0.4-16 kA m(-1). The data show four distinct field regions: the well-known regions of uniform and oscillating domain wall movement as well as a process with multiple vortices, and finally a new process including Bloch walls and the generation of vortex-antivortex pairs in the inner part of the stripe rather than at the edges. We investigate this process in detail and derive a criterion for the formation of Bloch walls.     

Magnetization reversal dependence on magnetic properties of a spin torque oscillator with in-plane anisotropy free layer and orthogonal polarizer

The effect of magnetic properties on magnetization dynamics is studied for a spin torque oscillator (STO) composed of a free layer with an in-plane magnetic anisotropy and a reference layer with a fixed out-of plane magnetization. A transition from damped to uniform oscillations is observed for a critical value of saturation magnetization M_S). In the uniform oscillations regime, the frequency is inversely proportional to M_S. Similarly, the critical current for achieving uniform oscillations is investigated as a function of free layer intrinsic properties. In a second part of the study, the magnetostatic field (H_m) from the reference layer is considered and it is revealed that the out-of plane component of magnetization has a strong dependence on H_m. For a particular configuration, H_m could reduce the out-of plane component maximizing thus the out-put signal of the STO.     

Magnetization reversal of small particles in an oscillating magnetic field

The nonlinear behavior of single spherical particles and many-particle ensembles under an external oscillating magnetic field was studied using the Landau-Lifshitz-Gilbert approach. The exact analytical formulae for calculating field frequency and the dependence of the configuration of the initial moment on the system mean magnetization were obtained. Using asymptotic decomposition we obtained simple expressions for describing the nonlinear dynamics of spherical particles in the cases of large and small frequencies. These solutions are in good agreement with numerical calculations of the Landau-Lifshitz-Gilbert equation for the considering systems.     

Magnetization reversal of ferromagnetic nanoparticles under inhomogeneous magnetic field

We investigated remagnetization processes in ferromagnetic nanoparticles under inhomogeneous magnetic field induced by the tip of magnetic force microscope (MFM) in both theoretical and empirical ways. Systematic MFM observations were carried out on arrays of submicron-sized elliptical ferromagnetic particles of Co and FeCr with different sizes and periods. It clearly reveals the distribution of remanent magnetization and processes of local remagnetization of individual ferromagnetic particles. Modeling of remagnetization processes in ferromagnetic nanoparticles under magnetic field induced by MFM probe was performed on the base of Landau–Lifshitz–Gilbert equation for magnetization. MFM-induced inhomogeneous magnetic field is very effective to control the magnetic state of individual ferromagnetic nanoparticles as well as to create different distribution of magnetic field in array of ferromagnetic nanoparticles.     

Magnetization reversal observed by the deflection of magnetic actuator

A magnetic actuator consisting of a silicon oxide microcantilever and a silicon oxide plate deposited on ferromagnetic multilayer thin films is fabricated using electron beam lithography and electron beam evaporation, and placed in various magnetic fields to observe its flexure. The magnetic actuator is bent by magnetic torque produced by ferromagnetic multilayer thin films under an external magnetic field owing to the fabrication of a highly sensitive microcantilever and the design of elliptic ferromagnetic thin films with high magnetic shape anisotropy. The magnetic actuator is placed in four kinds of magnetic field directions to investigate the diversity of deflections; the angles between the easy axis of the ferromagnetic multilayer thin films and the direction of the external magnetic field are 90°, 70°, 45° and 20°.     

Magnetization reversal by a single pulse of magnetic field or spin-polarized current

One of the important requirements for spintronic devices concerns an efficient magnetization reversal, which may eventually lead to ultra-fast non-volatile magnetic memory applications. In particular, it is necessary to achieve stable sub-nanosecond switching times and to reduce magnetization “ringing”, so that the reversal will proceed along the shortest ballistic path connecting the initial and the target magnetization states. This paper is dedicated to the numerical simulations of a mono-domain ferromagnetic particle, described by the Landau–Lifshitz–Gilbert equation. We study the general case of arbitrary orientation of the applied field/current pulses, constructing dynamic diagrams for the reversal time. We have found that even short 50 ps pulses, applied at a proper angle, will induce magnetization reversal with minimal ringing effects.