Dicarboxylate-bridged (Mo2)n (n = 2, 3, 4) paddle-wheel complexes: potential intermediate building blocks for metal-organic frameworks

The treatment of the dimeric paddle-wheel (PW) compound [Mo(2)(NCCH(3))(10)][BF(4)](4)1 with oxalic acid (0.5 equiv.), 1,1-cyclobutanedicarboxylic acid (1 equiv.), 5-hydroxyisophthalic acid (1 equiv.) (m-bdc-OH) or 2,3,5,6-tetrafluoroterephthalic acid (0.5 or 1 equiv.) leads to the formation of macromolecular dicarboxylate-linked (Mo(2))(n) entities (n = 2, 3, 4). The structure of the compounds depends on the length and geometry of the organic linkers. In the case of oxalic acid, the dimeric compound [(CH(3)CN)(8)Mo(2)(OOC-COO)Mo(2)(NCCH(3))(8)][BF(4)](6)2 is formed selectively, whereas the use of 2,3,5,6-tetrafluoroterephthalic acid affords the square-shaped complex [(CH(3)CN)(6)Mo(2)(OOC-C(6)F(4)-COO)](4)[BF(4)](8)3. Bent linkers with a bridging angle of 109° and 120°, respectively, lead to the formation of the molecular loop [(CH(3)CN)(6)Mo(2)(OOC-C(4)H(6)-COO)](2)[BF(4)](4)4 and the bowl-shaped molecular triangle [(CH(3)CN)(6)Mo(2)(m-bdc-OH)](3)[BF(4)](6)5. All complexes are characterised by X-ray single crystal diffraction, NMR ((1)H, (11)B, (13)C and (19)F) and UV-Vis spectroscopy.     

Dirhodium formamidinate compounds with bidentate nitrogen chelating ligands

The reactions of [Rh(2)(DTolF)(2)(CH(3)CN)(6)][BF(4)](2) (1) (DTolF = N,N'-di-p-tolylformamidinate) with 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen) proceed with substitution of CH(3)CN molecules to give products with the N-N ligands chelating in an equatorial-equatorial (eq-eq) fashion. Compound 1 reacts with 1 equiv of bpy to yield a mixture of [Rh(2)(DTolF)(2)(bpy)(CH(3)CN)(3)][BF(4)](2).(CH(3))(2)CO (2a) and [Rh(2)(DTolF)(2)(bpy)(CH(3)CN)(4)][BF(4)](2) (2b). Compound 2a crystallizes in the monoclinic space group P2(1)/n with a = 13.5856(2) A, b = 18.0402(2) A, c = 21.4791(3) A; alpha = 90 degrees, beta = 101.044(1) degrees, gamma = 90 degrees; V = 5167.27(12) A(3), Z = 4, R = 0.0531, and R(w) = 0.0948. Compound 2b crystallizes in the monoclinic space group P2(1)/n with a = 10.9339(2) A, b = 24.4858(1) A, c = 19.4874(3) A; alpha = 90 degrees, beta = 94.329(1) degrees, gamma = 90 degrees; V = 5202.38(13) A(3), Z = 4, R = 0.0459, and R(w) = 0.1140. The reaction of compound 1 with 2 equiv of bpy affords [Rh(2)(DTolF)(2)(bpy)(2)(CH(3)CN)][BF(4)](2) (3) which crystallizes in the monoclinic space group P2(1)/a with a = 19.4534(4) A, b = 13.8298(3) A, c = 19.8218(5) A; alpha = 90 degrees, beta = 109.189(1) degrees, gamma = 90 degrees; V = 5036.5(2) A(3), Z = 4, R = 0.0589, and R(w) = 0.0860. Compound 1 reacts with 1 equiv of phen to form [Rh(2)(DTolF)(2)(phen)(CH(3)CN)(3)][BF(4)](2).2C(2)H(5)OC(2)H(5) (4) which crystallizes in the triclinic space group P1macro with a = 12.6346(2) A, b = 13.5872(2) A, c = 19.0597(3) A; alpha = 71.948(1) degrees, beta = 73.631(1) degrees, gamma = 71.380(1) degrees; V = 2886.70(8) A(3), Z = 2, R = 0.0445, and R(w) = 0.1207. A notable feature of the cations in 2a, 3, and 4 is the presence of only one axial (ax) CH(3)CN ligand, a fact that can be attributed to the steric effect of the formamidinate bridging ligands. Compounds 2a, 2b, 3, and 4 were fully characterized by X-ray crystallography and (1)H NMR spectroscopy, whereas [Rh(2)(DTolF)(2)(phen)(2)(CH(3)CN)(2)][BF(4)](2) (5) was characterized by (1)H NMR spectroscopy.     

Synthesis and magnetic properties of 3-D [Ru(II/III)(2)(O(2)CMe)(4)](3)[M(III)(CN)(6)] (M = Cr,Fe, Co)

Three-dimensional network structures of [Ru(II/III)(2)(O(2)CMe)(4)](3)[M(III)(CN)(6)] (M = Cr, Fe, Co) composition have been formed and their magnetic properties characterized. [Ru(II/III)(2)(O(2)CMe)(4)](3)[M(III)(CN)(6)] (M = Cr, Fe, Co) have nu(CN) IR absorptions at 2138, 2116, and 2125 cm(-1) and have body-centered unit cells (a = 13.34, 13.30, and 13.10 A, respectively) with -M-Ctbd1;N-Ru=Ru-Ntbd1;C-M- linkages along all three Cartesian axes. [Ru(II/III)(2)(O(2)CMe)(4)](3)[Cr(III)(CN)(6)] magnetically orders as a ferrimagnet (T(c) = 33 K) and has an unusual constricted hysteresis loop.     

Systematic preparation of Mo 2 4+ building blocks for supramolecular assemblies

The preparation of additional and useful building blocks for the construction of supramolecular entities with quadruply bonded Mo(2)(4+) units has been explored, and five new mixed-ligand complexes with three types of ligands and various basicities are reported. The ligands used were the DAniF (N,N'-di-p-anisylformamidinate) anion, the acetate anion, and neutral acetonitrile molecules. The formamidinate ligands are the least labile, and the acetonitrile molecules are the most labile. This difference as well as a relatively strong trans directing influence by the formamidinate anions in ligand substitution reactions allows designed synthesis of various mixed-ligand building blocks, including rare pairs of cis and trans isomers. The new compounds are cis-Mo(2)(DAniF)(2)(O(2)CCH(3))(2) (1), trans-Mo(2)(DAniF)(2)(O(2)CCH(3))(2) (2), trans-[Mo(2)(DAniF)(2)(O(2)CCH(3))(CH(3)CN(eq)())(2)]BF(4) (3), trans-[Mo(2)(DAniF)(2)(CH(3)CN(eq)())(4)](BF(4))(2) (4), and [Mo(2)(O(2)CH(3))(CH(3)CN(eq)())(6)(CH(3)CN(ax)())](BF(4))(3) (5), where eq and ax designate equatorial and axial ligands, respectively. A comparison with some previously synthesized complexes is given along with a discussion of the overall reactivity of all compounds.     

Reactions of the tetrafluoroborate complex [Mo2Cp2(κ(2)-F2BF2)(μ-PPh2)2(CO)]BF4 with mono- and bidentate ligands having E-H bonds (E = O, S, Se, N, P)

The title compound reacted rapidly with CN(t)Bu at room temperature by displacing the BF(4)(-) ligand and incorporating three molecules of isocyanide to yield the electron-precise complex [Mo(2)Cp(2)(μ-PPh(2))(2)(CN(t)Bu)(3)(CO)](BF(4))(2), which was obtained as a mixture of cis and trans isomers. Reaction with several HER(n) molecules (HER(n) = HSPh, HSePh, H(2)PCy) took place with formal elimination of HBF(4) and spontaneous carbonylation to give the electron-precise cations [Mo(2)Cp(2)(μ-ER(n))(μ-PPh(2))(2)(CO)(2)](+). Reactions with several bidentate ligands (L(2)H) having acidic E-H bonds (2-hydroxypyridine, 2-mercaptopyridine, cathecol, 2-aminophenol, and 2-aminothiophenol) proceeded analogously with deprotonation of these bonds with the preference E = S > O > N. The N,O-donor ligands yielded 32-electron chelate derivatives of the type [Mo(2)Cp(2)(O,N-L(2))(μ-PPh(2))(2)(CO)]BF(4) (L(2) = OC(5)H(4)N, OC(6)H(4)NH(2)), whereas the S,N-donors yielded 34-electron, S-bridged complexes [Mo(2)Cp(2)(μ-S:S,N-L(2))(μ-PPh(2))(2)(CO)]BF(4) [L(2) = SC(5)H(4)N (Mo-Mo = 2.8895(8) ?), SC(6)H(4)NH(2)]. However, reaction with catechol gave a monodentate derivative [Mo(2)Cp(2)(O-OC(6)H(4)OH)(μ-PPh(2))(2)(CO)]BF(4). In contrast, reactions of the title complex with several carboxylic acids and related species (acetic, benzoic, and thioacetic acids, acetamide, thioacetamide, and sodium diethyldithiocarbamate) were insensitive to the nature of the donor atoms and gave in all cases 32-electron chelate derivatives of type [Mo(2)Cp(2)(κ(2)-L(2))(μ-PPh(2))(2)(CO)]BF(4). All of the above cations having Mo-bound OH, NH, or NH(2) groups were easily deprotonated upon reaction with 1,8-diazabicycloundec-7-ene (DBU) or other bases to give neutral complexes which exhibited different coordination motifs depending on the donor atoms, including chelate complexes of the type [Mo(2)Cp(2)(κ(2)-L(2)')(μ-PPh(2))(2)(CO)] (L(2)' = OC(6)H(4)O, OC(6)H(4)NH), the bridged complexes [Mo(2)Cp(2)(μ-S,N:S,N-SC(6)H(4)NH)(μ-PPh(2))(2)] and [Mo(2)Cp(2){μ-S,N-N(S)CMe}(μ-PPh(2))(2)], and the terminal acetylimido complex [Mo(2)Cp(2){N-N(O)CMe}(μ-PPh(2))(2)(CO)].     

Hydrido copper clusters supported by dithiocarbamates: oxidative hydride removal and neutron diffraction analysis of [Cu7(H){S2C(aza-15-crown-5)}6

Reactions of Cu(I) salts with Na(S(2)CR) (R = N(n)Pr(2), NEt(2), aza-15-crown-5), and (Bu(4)N)(BH(4)) in an 8:6:1 ratio in CH(3)CN solution at room temperature yield the monocationic hydride-centered octanuclear Cu(I) clusters, [Cu(8)(H){S(2)CR}(6)](PF(6)) (R = N(n)Pr(2), 1(H); NEt(2), 2(H); aza-15-crown-5, 3(H)). Further reactions of [Cu(8)(H){S(2)CR}(6)](PF(6)) with 1 equiv of (Bu(4)N)(BH(4)) produced neutral heptanuclear copper clusters, [Cu(7)(H){S(2)CR}(6)] (R = N(n)Pr(2), 4(H); NEt(2), 5(H); aza-15-crown-5, 6(H)) and clusters 4-6 can also be generated from the reaction of Cu(BF(4))(2), Na(S(2)CR), and (Bu(4)N)(BH(4)) in a 7:6:8 molar ratio in CH(3)CN. Reformation of cationic Cu(I)(8) clusters by adding 1 equiv of Cu(I) salt to the neutral Cu(7) clusters in solution is observed. Intriguingly, the central hydride in [Cu(8)(H){S(2)CN(n)Pr(2)}(6)](PF(6)) can be oxidatively removed as H(2) by Ce(NO(3))(6)(2-) to yield [Cu(II)(S(2)CN(n)Pr(2))(2)] exploiting the redox-tolerant nature of dithiocarbamates. Regeneration of hydride-centered octanuclear copper clusters from the [Cu(II)(S(2)CN(n)Pr(2))(2)] can be achieved by reaction with Cu(I) ions and borohydride. The hydride release and regeneration of Cu(I)(8) was monitored by UV-visible titration experiments. To our knowledge, this is the first time that hydride encapsulated within a copper cluster can be released as H(2) via chemical means. All complexes have been fully characterized by (1)H NMR, FT-IR, UV-vis, and elemental analysis, and molecular structures of 1(H), 2(H), and 6(H) were clearly established by single-crystal X-ray diffraction. Both 1(H) and 2(H) exhibit a tetracapped tetrahedral Cu(8) skeleton, which is inscribed within a S(12) icosahedron constituted by six dialkyl dithiocarbamate ligands in a tetrametallic-tetraconnective (μ(2), μ(2)) bonding mode. The copper framework of 6(H) is a tricapped distorted tetrahedron in which the four-coordinate hydride is demonstrated to occupy the central site by single crystal neutron diffraction. Compounds 1-3 exhibit a yellow emission in both the solid state and in solution under UV irradiation at 77 K, and the structureless emission is assigned as a (3)metal to ligand charge transfer (MLCT) excited state. Density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations on model compounds match the experimental structures and provide rationalization of their bonding and optical properties.     

Synthesis and characterization of heterobimetallic oxo-bridged aluminum-rare earth metal complexes

Reaction of the aluminum hydroxide LAl(OH)[C(Ph)CH(Ph)] (1, L = HC[(CMe)(NAr)](2), Ar = 2,6-iPr(2)C(6)H(3)) with Y(CH(2)SiMe(3))(3)(THF)(2) yielded the oxo-bridged heterobimetallic yttrium dialkyl complex LAl[C(Ph)CH(Ph)](μ-O)Y(CH(2)SiMe(3))(2)(THF)(2) (2). Alkane elimination reaction of 2 with 2-(imino)pyrrole [NN]H ([NN]H = 2-(ArN═CH)-5-tBuC(4)H(2)NH) afforded the yttrium monoalkyl complex LAl[C(Ph)CH(Ph)] (μ-O)Y(CH(2)SiMe(3))[NN](THF)(2) (5). Alternatively, 5 can be prepared in high yield by reaction of 1 with [NN]Y(CH(2)SiMe(3))(2)(THF)(2) (3). The analogous samarium alkyl complex LAl[C(Ph)CH(Ph)](μ-O)Sm(CH(2)SiMe(3))[NN](THF)(2) (6) was prepared similarly. Reactions of 5 and 6 with 1 equiv of iPrOH yielded the corresponding alkoxyl complexes 7 and 8, respectively. The molecular structures of 3, 6, and 8 have been determined by X-ray single-crystal analysis. Complexes 2, 3, 5, 7, and 8 have been investigated as lactide polymerization initiators. The heterobimetallic alkoxyl 8 is highly active to yield high molecular weight (M(n) = 6.91 × 10(4)) polylactides with over 91% conversion at the lactide-to-initiator molar ratio of 2000.     

Electronic and structural variation among copper(II) complexes with substituted phenanthrolines

A series of copper(II) complexes with substituted phenanthroline ligands has been synthesized and characterized electronically and structurally. The compounds that have been prepared include the monosubstituted ligand complexes of the general formula [Cu(5-R-phen)(2)(CH(3)CN)](BF(4))(2), where R = NO(2), Cl, H, or Me, and the disubstituted ligand complex [Cu(5,6-Me(2)-phen)(2)(CH(3)CN)](BF(4))(2). The complexes [Cu(5-NO(2)-phen)(2)(CH(3)CN](BF(4))(2) (1), [Cu(5-Cl-phen)(2)(CH(3)CN)](BF(4))(2) (2), [Cu(o-phen)(2)(CH(3)CN)](BF(4))(2) (3), and [Cu(5-Me-phen)(2)(CH(3)CN)](BF(4))(2) (4) each crystallize in the space group C2/c with compounds 1, 2, and 4 comprising an isomorphous set. The disubstituted complex [Cu(5,6-Me(2)-phen)(2)(CH(3)CN)](BF(4))(2) (5) crystallizes in the space group P2(1)/c. Each structure is characterized by a distorted trigonal bipyramidal arrangement of ligands around the central copper atom with approximate or exact C(2) symmetry. The progression from electron-withdrawing to electron-donating substituents on the phenanthroline ligands correlates with less accessible reduction potentials for the bis-chelate complexes.     

Synthesis and reactions of group 6 metal half-sandwich complexes of 2,2-dicyanoethylene-1,1-dichalcogenolates [(Cp*)M[E(2)C=C(CN)(2)](2)]-(M = Mo,W; E = S,Se)

A series of group 6 transition metal half-sandwich complexes with 1,1-dichalcogenide ligands have been prepared by the reactions of Cp*MCl(4)(Cp* = eta(5)-C(5)Me(5); M = Mo, W) with the potassium salt of 2,2-dicyanoethylene-1,1-dithiolate, (KS)(2)C=C(CN)(2) (K(2)-i-mnt), or the analogous seleno compound, (KSe)(2)C=C(CN)(2) (K(2)-i-mns). The reaction of Cp*MCl(4) with (KS)(2)C=C(CN)(2) in a 1:3 molar ratio in CH(3)CN gave rise to K[Cp*M(S(2)C=C(CN)(2))(2)] (M = Mo, 1a, 74%; M = W, 2a, 46%). Under the same conditions, the reaction of Cp*MoCl(4) with 3 equiv of (KSe)(2)C=C(CN)(2) afforded K[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3a) and K[Cp*Mo(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))] (4) in respective yields of 45% and 25%. Cation exchange reactions of 1a, 2a, and 3a with Et(4)NBr resulted in isolation of (Et(4)N)[Cp*Mo(S(2)C=C(CN)(2))(2)] (1b), (Et(4)N)[Cp*W(S(2)C=C(CN)(2))(2)] (2b), and (Et(4)N)[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3b), respectively. Complex 4 crystallized with one THF and one CH(3)CN molecule as a three-dimensional network structure. Inspection of the reaction of Cp*WCl(4) with (KSe)(2)C=C(CN)(2) by ESI-MS revealed the existence of three species in CH(3)CN, [Cp*W(Se(2)C=C(CN)(2))(2)]-, [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-, and [Cp*W(Se(Se(2))C=C(CN)(2))(2)]-, of which [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-(5) was isolated as the main product. Treatment of 2a with 1/4 equiv of S(8) in refluxing THF resulted in sulfur insertion and gave rise to K[Cp*W(S(2)C=C(CN)(2))(S(S(2))C=C(CN)(2))](6), which crystallized with two THF molecules forming a three-dimensional network structure. 6 can also be prepared by refluxing 2a with 1/4 equiv of S(8) in THF. 3a readily added one Se atom upon treatment with 1 mol of Se powder in THF to give 4 in high yield, while the treatment of 3a or 4 with 2 equiv of Na(2)Se in THF led to formation of a dinuclear complex [(Cp*Mo)(2)(mu-Se)(mu-Se(Se(3))C=C(CN)(2))] (7). The structure of 7 consists of two Cp*Mo units bridged by a Se(2-) and a [Se(Se(3))C=C(CN)(2)](2-) ligand in which the triselenido group is arranged in a nearly linear way (163 degrees). The reaction of 2a with 2 equiv of CuBr in CH(3)CN yielded a trinuclear complex [Cp*WCu(2)(mu-Br)(mu(3)-S(2)C=C(CN)(2))(2)] (8), which crystallized with one CH(3)CN and generated a one-dimensional chain polymer through bonding of Cu to the N of the cyano groups.     

Coordination algorithms control molecular architecture: [CuI4(L2)4]4+ grid complex versus [MII2(L2)2X4]y+ side-by-side complexes (M=Mn,Co, Ni,Zn; X=solvent or anion) and [FeII(L2)3][Cl3FeIIIOFeIIICl3

The synthesis and characterisation of a pyridazine-containing two-armed grid ligand L2 (prepared from one equivalent of 3,6-diformylpyridazine and two equivalents of p-anisidine) and the resulting transition metal (Zn, Cu, Ni, Co, Fe, Mn) complexes (1-9) are reported. Single-crystal X-ray structure determinations revealed that the copper(I) complex had self-assembled as a [2 x 2] grid, [Cu(I) (4)(L2)(4)][PF(6)](4).(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25) (2.(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25)), whereas the [Zn(2)(L2)(2)(CH(3)CN)(2)(H(2)O)(2)][ClO(4)](4).CH(3)CN (1.CH(3)CN), [Ni(II) (2)(L2)(2)(CH(3)CN)(4)][BF(4)](4).(CH(3)CH(2)OCH(2)CH(3))(0.25) (5 a.(CH(3)CH(2)OCH(2)CH(3))(0.25)) and [Co(II) (2)(L2)(2)(H(2)O)(2)(CH(3)CN)(2)][ClO(4)](4).(H(2)O)(CH(3)CN)(0.5) (6 a.(H(2)O)(CH(3)CN)(0.5)) complexes adopt a side-by-side architecture; iron(II) forms a monometallic cation binding three L2 ligands, [Fe(II)(L2)(3)][Fe(III)Cl(3)OCl(3)Fe(III)].CH(3)CN (7.CH(3)CN). A more soluble salt of the cation of 7, the diamagnetic complex [Fe(II)(L2)(3)][BF(4)](2).2 H(2)O (8), was prepared, as well as two derivatives of 2, [Cu(I) (2)(L2)(2)(NCS)(2)].H(2)O (3) and [Cu(I) (2)(L2)(NCS)(2)] (4). The manganese complex, [Mn(II) (2)(L2)(2)Cl(4)].3 H(2)O (9), was not structurally characterised, but is proposed to adopt a side-by-side architecture. Variable temperature magnetic susceptibility studies yielded small negative J values for the side-by-side complexes: J=-21.6 cm(-1) and g=2.17 for S=1 dinickel(II) complex [Ni(II) (2)(L2)(2)(H(2)O)(4)][BF(4)](4) (5 b) (fraction monomer 0.02); J=-7.6 cm(-1) and g=2.44 for S= 3/2 dicobalt(II) complex [Co(II) (2)(L2)(2)(H(2)O)(4)][ClO(4)](4) (6 b) (fraction monomer 0.02); J=-3.2 cm(-1) and g=1.95 for S= 5/2 dimanganese(II) complex 9 (fraction monomer 0.02). The double salt, mixed valent iron complex 7.H(2)O gave J=-75 cm(-1) and g=1.81 for the S= 5/2 diiron(III) anion (fraction monomer=0.025). These parameters are lower than normal for Fe(III)OFe(III) species because of fitting of superimposed monomer and dimer susceptibilities arising from trace impurities. The iron(II) centre in 7.H(2)O is low spin and hence diamagnetic, a fact confirmed by the preparation and characterisation of the simple diamagnetic iron(II) complex 8. M?ssbauer measurements at 77 K confirmed that there are two iron sites in 7.H(2)O, a low-spin iron(II) site and a high-spin diiron(III) site. A full electrochemical investigation was undertaken for complexes 1, 2, 5 b, 6 b and 8 and this showed that multiple redox processes are a feature of all of them.     

Amidinate-carboxylate complexes of dimolybdenum and ditungsten: M2(O2CR)2((NiPr)2CR')2. Preparations, molecular and electronic structures and reactions.

The compounds M(2)(O(2)CMe)(4) and the lithium amidinates Li[(N(i)Pr)(2)CR] react to give the new compounds trans-M(2)(O(2)CMe)(2)[(N(i)Pr)(2)CR](2) where M = Mo or W and R = Me (M = Mo only), -C[triple bond]C(t)Bu, -C[triple bond]CPh and -C[triple bond]C-Fc where Fc = 1-ferrocenyl. The limitations of this type of reaction are described based on steric considerations together with the preparation and characterization of the compound Mo(2)(micro-O(2)C-9-anthracene)(2)[eta(2)-(N(i)Pr)(2)CMe](2). The electronic structures of the bis-amidinate-bis-carboxylate M(2) complexes are described based on model compounds employing density functional theory and are correlated with the experimental observations of their physicochemical properties and in particular their observed electronic absorption spectra which show intense MLCT absorption bands. Preliminary studies of the reactions of these bis-amidinate-bis-carboxylate complexes in the preparation of 1-D oligomers are also described along with the preparation and molecular structures of the compounds [Li(N(i)Pr)(2)CR.THF](2) where R = 2-thienyl or -C[triple bond]C-Ph. The kinetic lability of these new M(2)-containing compounds toward ligand exchange is also noted.     

Assembly of an allenylidene ligand, a terminal alkyne, and an acetonitrile molecule: formation of osmacyclopentapyrrole derivatives

Treatment in acetonitrile at -30 C of the hydride-alkenylcarbyne complex [OsH([triple bond]CCH=CPh2)(CH3CN)2(P(i)Pr3)2][BF4]2 (1) with (t)BuOK produces the selective deprotonation of the alkenyl substituent of the carbyne and the formation of the bis-solvento hydride-allenylidene derivative [OsH(=C=C=CPh2)(CH3CN)2(P(i)Pr3)2]BF4 (2), which under carbon monoxide atmosphere is converted into [Os(CH=C=CPh2)(CO)(CH3CN)2(P(i)Pr3)2]BF4 (3). When the treatment of 1 with (t)BuOK is carried out in dichloromethane at room temperature, the fluoro-alkenylcarbyne [OsHF([triple bond]CCH=CPh2)(CH3CN)(P(i)Pr3)2]BF4 (4) is isolated. Complex 2 reacts with terminal alkynes. The reactions with phenylacetylene and cyclohexylacetylene afford [Os[(E)-CH=CHR](=C=C=CPh2)(CH3CN)2(P(i)Pr3)2]BF4 (R = Ph (5), Cy (6)), containing an alkenyl ligand beside the allenylidene, while the reaction with acetylene in dichloromethane at -20 degrees C gives the hydride-allenylidene-pi-alkyne [OsH(=C=C=CPh2)(eta2-HC[triple bond]CH)(P(i)Pr3)2]BF4 (7), with the alkyne acting as a four-electron donor ligand. In acetonitrile under reflux, complexes 5 and 6 are transformed into the osmacyclopentapyrrole compounds [Os[C=C(CPh2CR=CH)CMe=NH](CH3CN)2]BF4 (R = Ph (8), Cy (9)), as a result of the assembly of the allenylidene ligand, the alkenyl group, and an acetonitrile molecule. The X-ray structures of 2, 5, and 8 are also reported.     

Facile allylic C-H bond activation on the bridging disulfide ligand in the Ru(III) dinuclear complex having a conjugated RuSSRu core

Treatment of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1), which is prepared by the reaction of [[RuCl(P(OCH(3))(3))(2)](2)(mu-S(2))(mu-Cl)(2)] (2) with 4 equiv of AgCF(3)SO(3), with terminal alkenes such as 1-pentene, allyl ethyl ether, allyl phenyl ether, 1,4-hexadiene, and 3-methyl-1-butene, resulted in the formation of complexes carrying a C(3)S(2) five-membered ring, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CR(1)R(2)S]](CF(3)SO(3))(4) (3, R(1) = CH(2)CH(3), R(2) = H, 40%; 4, R(1) = OCH(2)CH(3), R(2) = H, 60%; 5, R(1) = OC(6)H(5), R(2) = H, 73%; 6, R(1) = CH=CHCH(3), R(2) = H, 48%; 7, R(1) = R(2) = CH(3), 40%). Reaction of 1 with methylenecycloalkanes was found to give several different types of products, depending on the ring size of the substrates. A trace of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(CH(2)CH(2))CH(CH(3))S]](CF(3)SO(3))(4) (9) having a C(2)S(2) four-membered ring to bridge the two Ru atoms was obtained by the reaction of 1 with methylenecyclobutane, whereas the reaction with methylenecyclohexane gave [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-S(CH(2)(C=CHCH(2)CH(2)CH(2)CH(2))S)](CF(3)SO(3))(3) (10) in 69% yield via C-S bond formation and elimination of a proton. Throughout these reactions with alkenes giving a variety of products, the activation of the allylic C-H bond is always the essential and initial key step.     

Synthesis and reactivity of W3Te74+ clusters and chalcogen exchange in the M3Q7 (M = Mo, W; Q = S, Se, Te) cluster family

Heating WTe(2), Te, and Br(2) at 390 degrees C followed by extraction with KCN gives [W(3)Te(7)(CN)(6)](2-). Crystal structures of double salts Cs(3.5)K{[W(3)Te(7)(CN)(6)]Br}Br(1.5).4.5H(2)O (1), Cs(2)K(4){[W(3)Te(7)(CN)(6)](2)Cl}Cl.5H(2)O (2), and (Ph(4)P)(3){[W(3)Te(7)(CN)(6)]Br}.H(2)O (3) reveal short Te(2)...X (X = Cl, Br) contacts. Reaction of polymeric Mo(3)Se(7)Br(4) with KNCSe melt gives [Mo(3)Se(7)(CN)(6)](2-). Reactions of polymeric Mo(3)S(7)Br(4) and Mo(3)Te(7)I(4) with KNCSe melt (200-220 degrees C) all give as final product [Mo(3)Se(7)(CN)(6)](2)(-) via intermediate formation of [Mo(3)S(4)Se(3)(CN)(6)](2-)/[Mo(3)SSe(6)(CN)(6)](2-) and of [Mo(3)Te(4)Se(3)(CN)(6)](2-), respectively, as was shown by ESI-MS. (NH(4))(1.5)K(3){[Mo(3)Se(7)(CN)(6)]I}I(1.5).4.5H(2)O (4) was isolated and structurally characterized. Reactions of W(3)Q(7)Br(4) (Q = S, Se) with KNCSe lead to [W(3)Q(4)(CN)(9)](5-). Heating W(3)Te(7)Br(4) in KCNSe melt gives a complicated mixture of W(3)Q(7) and W(3)Q(4) derivatives, as was shown by ESI-MS, from which E(3)[W(3)(mu(3)-Te)(mu-TeSe)(3)(CN)(6)]Br.6H(2)O (5) and K(5)[W(3)(mu(3)-Te)(mu-Se)(3)(CN)(9)] (6) were isolated. X-ray analysis of 5 reveals the presence of a new TeSe(2-) ligand. The complexes were characterized by IR, Raman, electronic, and (77)Se and (125)Te NMR spectra and by ESI mass spectrometry.     

Molybdenum(VI) catalysts obtained from η3-allyl dicarbonyl precursors: synthesis, characterization and catalytic performance in cyclooctene epoxidation

The oxidative decarbonylation of the η(3)-allyl dicarbonyl complexes [Mo(η(3)-C(3)H(5))Cl(CO)(2)(L)] (L = 2,2'-bipyridine (bipy) (1), 4,4'-di-tert-butyl-2,2'-bipyridine (di-tBu-bipy) (2)) by reaction with aqueous tert-butylhydroperoxide (TBHP) or H(2)O(2) gave the following compounds in good to excellent yields: the oxo-bridged dimers [MoO(2)Cl(L)](2)O (L = bipy (3), di-tBu-bipy (6)) using TBHP(10 equiv.)/CH(3)CN/r.t.; the molybdenum oxide/bipyridine hybrid material {[MoO(3)(bipy)][MoO(3)(H(2)O)]}(n) (4) and the octanuclear complex [Mo(8)O(24)(di-tBu-bipy)(4)] (7) using TBHP(50 equiv.)/H(2)O/70 °C; the oxodiperoxo complexes MoO(O(2))(2)(L) (L = bipy (5), di-tBu-bipy (8)) using H(2)O(2)(10 equiv.)/CH(3)CN/r.t. The structure of 7·x(solvent) (where solvent = CH(2)Cl(2) and/or diethyl ether) was determined by single crystal X-ray diffraction. Despite possessing the same windmill-type complex as that described previously for 7·10CH(2)Cl(2), the crystal structure of 7·x(solvent) is unique due to differences in the crystal packing. Compounds 1-8 were examined as catalysts or catalyst precursors for the epoxidation of cyclooctene using aqueous TBHP or H(2)O(2) as oxidant at 55 or 70 °C. Reactions were performed without co-solvent or with the addition of water, ethanol or acetonitrile. Cyclooctene oxide was always the only reaction product. Solids recovered after 24 h reaction at 70 °C were identified by FT-IR spectroscopy as the hybrid 4 from (1,3-5)/TBHP, complex 5 from (1,3-5)/H(2)O(2), and complex 8 from (2,6-8)/H(2)O(2). With TBHP as oxidant, the highest epoxide yields (for 24 h reaction at 70 °C) were obtained using excess H(2)O as solvent (28-38% for 1,3-5; 87-98% for 2,6-8), while with H(2)O(2) as oxidant, the highest epoxide yields were obtained using CH(3)CN as solvent (54-81% for 3-8).     

Encapsulation of cyanometalates by a tris-macrocyclic ligand tricopper(II) complex: syntheses, structural variation, and magnetic exchange coupling pathways

The reaction of [M(CN)(6)](3-) (M = Cr(3+), Mn(3+), Fe(3+), Co(3+)) and [M(CN)(8)](4-/3-) (M = Mo(4+/5+), W(4+/5+)) with the trinuclear copper(II) complex of 1,3,5-triazine-2,4,6-triyltris[3-(1,3,5,8,12-pentaazacyclotetradecane)] ([Cu(3)(L)](6+)) leads to partially encapsulated cyanometalates. With hexacyanometalate(III) complexes, [Cu(3)(L)](6+) forms the isostructural host-guest complexes [[[Cu(3)(L)(OH(2))(2)][M(CN)(6)](2)][M(CN)(6)]][M(CN)(6)]30 H(2)O with one bridging, two partially encapsulated, and one isolated [M(CN)(6)](3-) unit. The octacyanometalates of Mo(4+/5+) and W(4+/5+) are encapsulated by two tris-macrocyclic host units. Due to the stability of the +IV oxidation state of Mo and W, only assemblies with [M(CN)(8)](4-) were obtained. The Mo(4+) and W(4+) complexes were crystallized in two different structural forms: [[Cu(3)(L)(OH(2))](2)[Mo(CN)(8)]](NO(3))(8)15 H(2)O with a structural motif that involves isolated spherical [[Cu(3)(L)(OH(2))](2)[M(CN)(8)]](8+) ions and a "string-of-pearls" type of structure [[[Cu(3)(L)](2)[M(CN)(8)]][M(CN)(8)]](NO(3))(4) 20 H(2)O, with [M(CN)(8)](4-) ions that bridge the encapsulated octacyanometalates in a two-dimensional network. The magnetic exchange coupling between the various paramagnetic centers is characterized by temperature-dependent magnetic susceptibility and field-dependent magnetization data. Exchange between the CuCu pairs in the [Cu(3)(L)](6+) "ligand" is weakly antiferromagnetic. Ferromagnetic interactions are observed in the cyanometalate assemblies with Cr(3+), exchange coupling of Mn(3+) and Fe(3+) is very small, and the octacoordinate Mo(4+) and W(4+) systems have a closed-shell ground state.     

A study of structural and bonding variations in the homologous series [Mo(2)(CN)(6)(dppm)(2)](n-) (n = 2, 1, 0)

Reaction of Mo(2)Cl(4)(dppm)(2) (dppm = bis(diphenylphosphino)methane) with 6 equiv of [n-Bu(4)N][CN] or [Et(4)N][CN] in dichloromethane yields [n-Bu(4)N](2)[Mo(2)(CN)(6)(dppm)(2)] (1) and [Et(4)N](2)[Mo(2)(CN)(6)(dppm)(2)] (2), respectively. The corresponding one- and two-electron oxidation products [n-Bu(4)N][Mo(2)(CN)(6)(dppm)(2)] (3) and Mo(2)(CN)(6)(dppm)(2) (4)were prepared by reactions of 1 with the oxidant NOBF(4). Single-crystal X-ray structures of 2.2CH(3)CN, 3.2CH(3)CN.2H(2)O, and 4.2CH(3)NO(2) were performed, and the results confirmed that all three complexes contain identical ligand sets with trans dppm ligands bisecting the Mo(2)(mu-CN)(2)(CN)(4) equatorial plane. The binding of the bridging cyanide ligands is affected by the oxidation state of the dimolybdenum core as evidenced by an increase in side-on pi-bonding overlap of the mu-CN in going from 1 to 4. The greater extent of pi-donation into Mo orbitals is accompanied by a lengthening of the Mo-Mo distance (2.736(1) A in Mo(2)(II,II) (2), 2.830(1) A in Mo(2)(II,III) (3), and 2.936(1) A in Mo(2)(III,III) (4)). A computational study of the closed-shell members of this homologous series, [Mo(2)(CN)(6)(dppm)(2)](n)() (n = 2-, 0), indicates that the more pronounced side-on pi-donation evident in the X-ray structure of 4 leads to significant destabilization of the delta orbital and marginal stabilization of the delta() orbitals with respect to nearly degenerate delta and delta orbitals in the parent compound, 2. The loss of delta contributions combined with the reduced orbital overlap due to higher charges on molybdenum centers in oxidized complexes 3 and 4 is responsible for the observed increase in the length of the Mo-Mo bond.     

An approach to the synthesis of polyoxometalate encapsulating different kinds of oxoanions as heteroions: bisphosphitopyrophosphatotriacontamolybdate [(HPO3)2(P2O7)Mo30O90]8-

A yellow [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion was prepared as a tetrapropylammonium (Pr(4)N(+)) salt from a 50 mM Mo(VI)-2 mM P(2)O(7)(4-)-4 mM HPO(3)(2-)-0.95 M HCl-60% (v/v) CH(3)CN system at ambient temperature. The (Pr(4)N)(8)[(HPO(3))(2)(P(2)O(7))Mo(30)O(90)] salt crystallized in the orthorhombic space group P(nma) (No. 62), with a = 30.827(2) A, b = 22.8060(15) A, c = 30.928(2) A, V = 21743(3) A(3), and Z = 4. The structure contained a (P(2)O(7))Mo(12)O(42) fragment derived from the removal of each corner-shared Mo(3)O(13) unit in a polar position from a [(P(2)O(7))Mo(18)O(54)](4-) structure, and each side of the (P(2)O(7))Mo(12)O(42) fragment was capped by a B-type (HPO(3))Mo(9)O(24) unit. The [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion was characterized by voltammetry and IR, UV-vis, and (31)P NMR spectroscopy. Unlike the Keggin and Dawson anions and the parent [(P(2)O(7))Mo(18)O(54)](4-) anion, the [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion exhibited two-electron redox waves in CH(3)CN with and without acid.     

New ligand systems incorporating two and three 4,4'-bipyridine units. Characterization of bi- and trimetallic rhodium and iridium complexes

The synthesis of new ligand systems based on the bipyridine unit for bi- and trimetallic complexes, including a rare example of a chiral bimetallic complex, is presented. Ligands BBPX (bis-bipyridine-xylene, 3) and TBPBX (tris-bipyridine-bis-xylene, 4) were prepared in one step by reacting alpha,alpha'-dibromo-o-xylene (2) with 2 equiv of the monolithiated derivative of 4,4'-dimethyl-2,2'-bipyridine. Dilithium (S)-binaphtholate (5) reacted with 2 equiv of 4-bromomethyl-4'-methyl-2,2'-bipyridine (6), affording ligand (S)-BBPBINAP (bis-bipyridine-binaphtholate, 7). These ligands reacted cleanly with 1, 1.5, and 1 equiv of the rhodium dimer [Rh(2)Cl(2)(HD)(2)] (HD = 1,5-hexadiene), respectively. Chloride abstraction led to the isolation of the cationic complexes BBPX[Rh(HD)BF(4)](2) (8), TBPBX[Rh(HD)BF(4)](3) (10), and (S)-BBPBINAP[Rh(HD)BF(4)](2) (12). When BBPX (3), TBPBX (4), and (S)-BBPBINAP (7) were added to 2, 3, and 2 equiv of [Rh(NBD)(2)]BF(4) or [Rh(NBD)(CH(3)CN)(2)]BF(4) (NBD = norbornadiene), respectively, clean formation of BBPX[Rh(NBD)BF(4)](2) (9), TBPBX[Rh(NBD)BF(4)](3) (11), and (S)-BBPBINAP[Rh(NBD)BF(4)](2) (13) was observed. The neutral iridium complex (S)-BBPBINAP[IrCl(COD)](2) (14) was obtained by reaction of (S)-BBPBINAP (7) with 1 equiv of [Ir(2)Cl(2)(COD)(2)] (COD = cyclooctadiene). The complexes were fully characterized including X-ray structural studies of 8, 9, and 13, and preliminary studies on their catalytic activity were performed.     

Molybdenum amido complexes with single Mo-N bonds: synthesis,structure, and reactivity

Reactions of the complex [MoCl(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (1) (phen=1,10-phenanthroline) with potassium arylamides were used to synthesize the amido complexes [Mo(N(R)Ar)(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (R=H, Ar=Ph, 2 a; R=H, Ar=p-tolyl, 2 b; R=Me, Ar=Ph; 2 c). For 2 b the Mo-N(amido) bond length (2.105(4) A) is consistent with it being a single bond, with which the metal attains an 18-electron configuration. The reaction of 2 b with HOTf affords the amino complex [Mo(eta(3)-C(3)H(4)-Me-2)(NH(2)(p-tol))(CO)(2)(phen)]OTf (3-OTf). Treatment of 3-OTf with nBuLi or KN(SiMe(3))(2) regenerates 2 b. The new amido complexes react with CS(2), arylisothiocyanates and maleic anhydride. A single product corresponding to the formal insertion of the electrophile into the Mo-N(amido) bond is obtained in each case. For maleic anhydride, ring opening accompanied the formation of the insertion product. The reaction of 2 b with maleimide affords [Mo(eta(3)-C(3)H(4)-Me-2)[NC(O)CH=CHC(O)](CO)(2)(phen)] (7), which results from simple acid-base metathesis. The reaction of 2 b with (p-tol)NCO affords [[Mo(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)](2)(eta(2)-MoO(4))] (8), which corresponds to oxidation of one third of the metal atoms to Mo(VI). Complex 8 was also obtained in the reactions of 2 b with CO(2) or the lactide 3,6-dimethyl-1,4-dioxane-2,5-dione. The structures of the compounds 2 b, 3-OTf, [Mo(eta(3)-C(3)H(4)-Me-2)[SC(S)(N(H)Ph)](CO)(2)(phen)] (4), [Mo(eta(3)-C(3)H(4)-Me-2)[SC(N(p-tol))(NH(p-tol))](CO)(2)(phen)] (5 a), and [Mo(eta(3)-C(3)H(4)-Me-2)[OC(O)CH=CHC(O)(NH(p-tol))](CO)(2)(phen)] (6), 7, and 8 (both the free complex and its N,N'-di(p-tolyl)urea adduct) were determined by X-ray diffraction.