Multichain copoly(α-amino acid). III. Multichain copoly(α-amino acid) prepared by the reaction of copoly(L-lysine γ-methyl-L-glutamate) with N-carboxy anhydride of β-benzyl L-aspartate

Graft copolymerization of N-carboxy anhydride of β-benzyl-L -aspartate onto copoly(L -lysine γ-methyl-L -glutamate) was carried out in N,N-dimethylformaide which contained 3 v/v% of dimethyl sulfoxide to obtain multi-N^ε-poly(β-benzyl-L -aspartyl)copoly(L -lysine γ-methyl-L gluta mate). The degree of polymerization of the branch chain attained was much influenced by the interval of the grafting sites of the copoly(L -lysine γ-methyl-L -glutamate). The solvent-induced two-step conformational transition of the multichain copoly(α-amino acid) was observed in the chloroform-dichloroacetic acid system at 25°C by the ORD technique. The stability of the α-helical conformation of the backbone polymer chain was decreased by the presence of poly(β-benzyl-L -aspartyl) branch chains that could form unstable α-helical conformations of opposite spirals.     

Ring opening polymerization of α‐amino acid N‐carboxyanhydrides catalyzed by rare earth catalysts: Polymerization characteristics and mechanism

Five rare earth complexes are first introduced to catalyze ring opening polymerizations (ROPs) of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (BLG NCA) and L ‐alanine NCA (ALA NCA) including rare earth isopropoxide (RE(OiPr)₃), rare earth tris(2,6‐di‐tert‐butyl‐4‐methylphenolate) (RE(OAr)₃), rare earth tris(borohydride) (RE(BH₄)₃(THF)₃), rare earth tris[bis(trimethylsilyl)amide] (RE(NTMS)₃), and rare earth trifluoromethanesulfonate. The first four catalysts exhibit high activities in ROPs producing polypeptides with quantitative yields (>90%) and moderate molecular weight (MW) distributions ranging from 1.2 to 1.6. In RE(BH₄)₃(THF)₃ and RE(NTMS)₃ catalytic systems, MWs of the produced polypeptides can be controlled by feeding ratios of monomer to catalyst, which is in contrast to the systems of RE(OiPr)₃ and RE(OAr)₃ with little controllability over the MWs. End groups of the polypeptides are analyzed by MALDI‐TOF MS and polymerization mechanisms are proposed accordingly. With ligands of significant steric hindrance in RE(OiPr)₃ and RE(OAr)₃, deprotonation of 3‐NH of NCA is the only initiation mode producing a N‐rare earth metallated NCA ( i ) responsible for further chain growth, resulting in α‐carboxylic‐ω‐aminotelechelic polypeptides after termination. In the case of RE(BH₄)₃(THF)₃ with small ligands, another initiation mode at 5‐CO position of NCA takes place simultaneously, resulting in α‐hydroxyl‐ω‐aminotelechelic polypeptides. In RE(NTMS)₃ system, the protonated ligand hexamethyldisilazane (HMDS) initiates the polymerization and produces α‐amide‐ω‐aminotelechelic polypeptides. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polymerization of N-carboxy-amino acid anhydrides in the solid state. I. Polymerizability of the various α-amino acid NCAs in the solid state

The solid-state polymerization of various α-amino acid NCAs was investigated and the results were compared with those obtained by heterogeneous polymerization in acetonitrile. Essential differences were found in the polymerizability of the NCAs in these two systems. In the solid state, L-leucine NCA was the most reactive among the NCAs examined, and its reactivity was even higher than in the precipitation polymerization of acetonitrile solutions. On the other hand, glycine NCA was the most inert among the NCAs examined in the solid state. The difference between the reactivities of glycine NCA and L-alanine NCA was interpreted in terms of their crystal structures. Several kinetic features of the solid-state polymerization were studied on γ-benzyl-L -glutamate NCA.     

Polymerization of α-amino acid N-carboxy anhydrides. III. Mechanism of polymerization of L- and DL-alanine NCA in acetonitrile

The polymerization of L - and DL -alanine NCA initiated with n-butylamine was carried out in acetonitrile which is a nonsolvent for polypeptide. The initiation reaction was completed within 60 min.; there was about 10% of conversion of monomer. The number-average degree of polymerization of the polymer obtained increased with the reaction period, and it was found to agree with value of W/I, where W is the weight of the monomer consumed by the polymerization and I is the weight of the initiator used. The initiation reaction of the polymerization was concluded as an attack of n-butylamine on the C₅ carbonyl carbon of NCA. The initiation, was followed by a propagation reaction, in which there was attack by an amino endgroup of the polymer on the C₅ carbonyl carbon of NCA. The rate of polymerization was observed by measuring the CO₂ evolved, and the activation energy was estimated as follows: 6.66 kcal./mole above 30°C. and 1.83 kcal./mole below 30°C. for L -alanine NCA; 15.43 kcal./mole above 30°C., 2.77 kcal./mole below 30°C. for DL -alanine NCA. The activation entropy was about ?43 cal./mole-°K. above 30°C. and ?59 cal./mole-°K. below 30°C. for L -alanine NCA; it was about ?14 cal./mole-°K. above 30°C. and ?56 cal./mole-°K. below 30°C. for DL -alanine NCA. From the polymerization parameters, x-ray diffraction diagrams, infrared spectra, and solubility in water of the polymer, the poly-DL -alanine obtained here at a low temperature was assumed to have a block copolymer structure rather than being a random copolymer of D - and L -alanine.     

Multichain copoly(α-amino acid). I. Multichain copoly(α-amino acid) prepared by reaction of copoly(L-lysine γ-methyl-L-glutamate) with N-carboxy anhydride of Nϵ-carbobenzyloxy-L-lysine

Polymerization of the N-carboxy anhydride of N^?-carbobenzyloxy-L -lysine in the presence of multifunctional polymeric initiator, copoly(L -lysine γ-methyl-L -glutamate) was studied in N,N-dimethylformamide containing 3% (v/v) of dimethyl sulfoxide. Multichain copoly(α-amino acid), i.e., multi-N^?-poly(N^?-carbobenzyloxy-L -lysine)copoly(L -lysine γ-methyl-L -glutamate), was obtained with linear poly(N^?-carbobenzyloxy-L -lysine) as by-product that could be removed by reprecipitation as was evidenced by gel-permeation chromatography. The degree of polymerization of the branch polymer chains estimated by the osmometric molecular weight determination and amino acid analysis was between 20 and 60, which decreased with increasing lysine content of the polymeric initiator. The stability of α-helical conformation of the multichain copoly(α-amino acid) was studied in the chloroform–dichloroacetic acid system at 25°C by the ORD technique. The α-helical conformation of poly(N^?-carbobenzyloxy-L -lysine) branches was less stable than those of linear poly(N^?-carbobenzyloxy-L -lysine) and the core molecular chains of the multichain copoly(α-amino acid).     

Polymerization of α-amino acid N-carboxy anhydrides initiated by histamine in N,N-dimethylformamide

The polymerization of α-amino acid N-carboxy anhydrides (NCAs) initiated by 4-aminoethylimidazole (histamine) was studied in order to synthesize poly(amino acids) containing an imidazole nucleus at the end of polymer chain. On the basis of the kinetical measurements, it was found that the rate of polymerization is proportional to the first order in both NCA and initiator concentrations and that the initiation reaction is predominantly caused by the primary amine with the highest basicity in a histamine molecule. Binding of the histamine fragment to the end of polymer chain was confirmed by elementary analysis, nuclear magnetic resonance spectroscopy, and measuring the number-average molecular weight of the resulting polymers. It was thus possible to prepare poly(amino acids) with a pendant histamine. In addition, the lowering of the number-average degree of polymerization of the polymers prepared was observed under the condition that the initial molar ratio of NCA to histamine was larger. It was caused by the reinitiation of polymerization by the imidazole nucleus at the chain end.     

Cyclic polypeptides by thermal polymerization of α‐amino acid N‐carboxyanhydrides

The NCAs of the following five amino acids were polymerized in bulk at 120 °C without addition of a catalyst or initiator: sarcosine (Sar), L ‐alanine (L ‐Ala), D ,L ‐phenylalanine (D ,L ‐Phe), D ,L ‐leucine (D ,L ‐Leu) and D ,L ‐valine (D,L ‐Val). The virgin reaction products were characterized by viscosity measurements ¹³C NMR spectroscopy and MALDI‐TOF mass spectrometry. In addition to numerous low molar mass byproducts cyclic polypeptides were formed as the main reaction products in the mass range above 800 Da. Two types of cyclic oligo‐ and polypeptides were detected in all cases with exception of sarcosine NCA, which only yielded one class of cyclic polypeptides. The efficient formation of cyclic oligo‐ and polypeptides explains why high molar mass polymers cannot be obtained by thermal polymerizations of α‐amino acid NCAs. Various polymerization mechanisms were discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4012–4020, 2008     

Living Polymerization of α‐Amino Acid N‐Carboxyanhydrides (NCA) upon Decreasing the Reaction Temperature

Summary : The n‐hexylamine‐initiated polymerization of N_ε‐trifluoroacetyl‐L ‐lysine N‐carboxyanhydride in N,N‐dimethyformamide was studied by nonaqueous capillary electrophoresis. A polypeptide with a broad molecular weight distribution was obtained and side reactions were clearly identified for polymerization at room temperature. The possibility of living polymerization at 0 °C was demonstrated.

Synthesis of living polypeptides by primary amine initiated polymerization of NCA at low temperatures.     

Synthesis and Conformation of Star‐Shaped Poly(γ‐benzyl‐L‐glutamate)s on a Cyclotriphosphazene Core

The preparation of star‐shaped poly(γ‐benzyl‐L ‐glutamate)s by the ring‐opening polymerization of N‐carboxy anhydride γ‐benzyl‐L ‐glutamate (BLG‐NCA) with hexakis(4‐aminomethylphenoxy)‐ ( 4 ) and hexakis(4‐aminophenoxy)cyclotriphosphazenes ( 6 ), and the conformation of resulting polymers has been studied. The six amino groups in 4 can initiate the polymerization of BLG‐NCA to give star‐shaped polyglutamates ( 7 ) with narrow molecular weight distributions (M _w/M _n = 1.10–1.33). For the polymerization of BLG‐NCA with 6 , however, a high ratio of [BLG‐MCA]/[ 6 ] was required to obtain star‐shaped polyglutamates ( 8 ). The conformation of 7 changed from a β‐sheet form to a right‐handed α‐helix form, depending on the degree of polymerization per chain (DP _n/6). The helix content of hexa‐armed poly (γ‐benzyl‐L ‐glutamate‐co‐L ‐glutamic acid)s ( 9 ), prepared by partial hydrolysis of 7 , increased significantly compared with that of the corresponding linear analogue ( 10 ). As increasing of helix content of 9 , the fluorescence spectra of 8‐anilino‐1‐naphthalenesulfonic acid (ANS), a fluorescence probe, shifted to a short wavelength accompanied by the enhancement of intensity, suggesting that star‐shaped polymers are liable to form hydrophobic domains. From these results and the structural feature of the cyclotriphosphazene core, the formation of a 3α‐helix bundle structure of polyglutamates on both sides of the phosphazene ring has been suggested.

     

Polymerization of α‐amino acid N‐carboxyanhydrides catalyzed by rare earth tris(borohydride) complexes: Mechanism and hydroxy‐endcapped polypeptides

In this work, rare earth tris(borohydride) complexes, Ln(BH₄)₃(THF)₃ (Ln = Sc, Y, La, and Dy), have been used to catalyze the ring‐opening polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (BLG NCA). All the catalysts show high activities and the resulting poly(γ‐benzyl‐L ‐glutamate)s (PBLGs) are recovered with high yields (≥90%). The molecular weights (MWs) of PBLG can be controlled by the molar ratios of monomer to catalyst, and the MW distributions (MWDs) are relatively narrow (as low as 1.16) depending on the rare earth metals and reaction temperatures. Block copolypeptides can be easily synthesized by the sequential addition of two monomers. The obtained P(γ‐benzyl‐L ‐glutamate‐b‐ε‐carbobenzoxy‐L ‐lysine) [P(BLG‐b‐BLL)] and P(γ‐benzyl‐L ‐glutamate‐b‐alanine) [P(BLG‐b‐ALA)] have been well characterized by NMR, gel permeation chromatography, and differential scanning calorimetry measurements. A random copolymer P(BLG‐co‐BLL) with a narrow MWD of 1.07 has also been synthesized. The polymerization mechanisms have been investigated in detail. The results show that both nucleophilic attack at the 5‐CO of NCA and deprotonation of 3‐NH of NCA in the initiation process take place simultaneously, resulting in two active centers, that is, an yttrium ALA carbamate derivative [H₂BOCH₂(CH)NHC(O)OLn? ] and a N‐yttriumlated ALA NCA. Propagation then proceeds on these centers via both normal monomer insertion and polycondensation. After termination, two kinds of telechelic polypeptide chains, that is, α‐hydroxyl‐ω‐aminotelechelic chains and α‐carboxylic‐ω‐aminotelechelic ones, are formed as characterized by MALDI‐TOF MS, ¹H NMR, ¹³C NMR, ¹H–¹H COSY, and ¹H–¹³C HMQC measurements. By decreasing the reaction temperature, the normal monomer insertion pathway can be exclusively selected, forming an unprecedented α‐hydroxyl‐ω‐aminotelechelic polypeptide. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polymerization of α,α-disubstituted β-propiolactones and lactams. VII. Stereoregular polymers from optically active lactones

Optically active α-phenyl-ααethyl-β-propiolactone of high optical purity was prepared and polymerized by homogeneous anionic initiation to the isotactic polyester. The racemic and isotactic polymers had apparently different crystalline properties suggesting that the former may be syndiotactic or may crystallize with unit cells containing both R and S blocks. Similar attempts to prepare α-methyl-α-isopropyl-β-propiolactone of high optical purity were unsuccessful although a partially crystalline polymer was obtained from the racemic monomer.     

Synthesis and characterization of macroinitiator‐amino terminated PEG and poly(γ‐benzyl‐L‐glutamate)‐PEO‐poly(γ‐benzyl‐L‐glutamate) triblock copolymer

Macroinitiator‐amino terminated poly(ethylene glycol) (PEG) (NH₂‐PEO‐NH₂) was prepared by converting both terminal hydroxyl groups of PEG to more reactive primary amino groups. The synthetic route involved reactions of chloridize, phthalimide and finally hydrazinolysis. Furthermore, poly(γ‐benzyl‐L ‐glutamate)‐poly(ethylene oxide)‐poly(γ‐benzyl‐L ‐glutamate) (PBLG‐PEO‐PBLG) triblock copolymer was synthesized by polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (Bz‐L‐GluNCA) using NH₂‐PEO‐NH₂ as macroinitiator. The resultant NH₂‐PEO‐NH₂ and triblock copolymer were characterized by FT‐IR, ¹H‐NMR and gel permeation chromatography (GPC) techniques. The results demonstrated that the degree of amination of the NH₂‐PEO‐NH₂ could be up to 1.95. The molecular weight of the PBLG‐PEO‐PBLG triblock copolymer could be adjusted easily by controlling the molar ratio of Bz‐L ‐Glu NCA to the macroinitiator NH₂‐PEO‐NH₂. Copyright © 2004 John Wiley & Sons, Ltd.     

Polymerization of N-carboxy–amino acid anhydrides in the solid state. II. Relation between polymerizability and molecular arrangement in L-leucine NCA and L-alanine NCA crystals

The polymerizability of N-carboxy–amino acid anhydrides (NCAs) of L -leucine and L -alanine was examined in the solid state and in solution. L -leucine NCA shows much higher reactivity in the solid state (when immersed in hexane) than in solution (in acetonitrile), but the opposite is true for L -alanine NCA. However, the two NCAs give similar values of apparent activation energy in each polymerization system. Rather high-molecular-weight polypeptides were obtained in the polymerization of L -leucine NCA in the solid state compared with those obtained in solution, while the molecular weight of polymers obtained from L -alanine NCA was higher in solution than in the solid state. IR spectra showed that α helices form mainly in the polymerization of both L -leucine NCA and L -alanine NCA in the solid state; a small amount of the β structure forms in the latter polymerization. X-ray diffraction and electron microscopy revealed that L -leucine NCA polymerizes predominantly along the c axis in the crystal, while the polymer chains grow in random directions in the crystal of L -alanine NCA. The difference can be explained by the molecular arrangement in the crystal. There are two requirements for high reactivity in the solid state: the five-membered rings of the monomer must form a layer structure and the polymer must occupy nearly the same space as the reacting monomer.     

Multichain copoly(α-amino acid). II. Preparation and properties of multi-Nϵ-poly(γ-benzyl-L-glutamyl)copoly(L-lysine γ-methyl-L-glutamate)

A number of multi-N^?-poly(γ-benzyl-L -glutamyl)copoly(L -lysine γ-methyl-L -glutamate)s with branches having various degrees of polymerization and with various intervals of the grafting sites in the core molecule were prepared in N,N-dimethylformamide containing dimethyl sulfoxide by the reaction of N-carboxy anhydride of γ-benzyl L -glutamate with random copoly(L -lysine γ-methyl-L -glutamate)s of different composition with various anhydride-initiator ratios. The relationship between the intrinsic viscosity measured in a coil solvent, dichloroacetic acid (DCA), and the number-average molecular weight determined by osmometry was found to be expressed by the Mark–Houwink–Sakurada equation for the multichain copoly(α-amino acid)s which were made from the same polymeric initiator. The observed α values of the multichain copoly(α-amino acid)s in the equation were lower than that of linear poly(γ-benzyl-L -glutamate). The solvent induced helix–coil transition of the multichain copolymer was investigated in the chloroform?DCA system by the ORD technique. Two kinds of transition regions were clearly distinguished: The α-helices of the core molecules underwent the transition at lower DCA concentration and those of the branch chains at higher DCA concentration. The reduced viscosity of the multichain copoly-(α-amino acid) increased slightly between the two transition regions, in contrast to the large decrease in the reduced viscosity of linear poly(γ-benzyl-L -glutamate) during the helix–coil transition.     

The Surface Modification of Hydroxyapatite Nanoparticles by the Ring Opening Polymerization of γ‐Benzyl‐L‐glutamate N‐carboxyanhydride

The surface modification of hydroxyapatite (HA) nanoparticles by the ring opening polymerization (ROP) of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (BLG‐NCA) was proposed to prepare the poly(γ‐benzyl‐L ‐glutamate) (PBLG)‐grafted HA nanoparticles (PBLG‐g‐HA) for the first time. HA nanoparticles were firstly treated by 3‐aminopropylthriethoxysilane (APS) and then the terminal amino groups of the modified HA particles initiated the ROP of BLG‐NCA to obtain PBLG‐g‐HA. The process was monitored by XPS and FT‐IR. The surface grafting amounts of PBLG on HA ranging from 12.1 to 43.1% were characterized by thermal gravimetric analysis (TGA). The powder X‐ray diffraction (XRD) analysis confirmed that the ROP only underwent on the surface of HA nanoparticles without changing its bulk properties. The SEM measurement showed that the PBLG‐g‐HA hybrid could form an interpenetrating net structure in the self‐assembly process. The PBLG‐g‐HA hybrid could maintain higher colloid stability than the pure HA nanoparticles. The in vitro cell cultures suggested the cell adhesion ability of PBLG‐g‐HA was much higher than that of pure HA.

     

Convenient synthesis of poly(γ‐benzyl‐L‐glutamate) from activated urethane derivatives of γ‐benzyl‐L‐glutamate

A series of activated urethane‐type derivatives of γ‐benzyl‐L ‐glutamate were synthesized, and their potential as monomers for polypeptide synthesis was investigated. The derivatives of the focus of this work were a series of N‐aryloxycarbonyl‐γ‐benzyl‐L ‐glutamate 1 , of which aryl groups were phenyl, 4‐chlorophenyl, and 4‐nitrophenyl. These urethanes 1 were reactive in polar solvents such as dimethylsulfoxide, N,N‐dimethylformamide (DMF), and N,N‐dimethylacetamide (DMAc), and were efficiently converted into poly(γ‐benzyl‐L ‐glutamate) (poly(BLG)) under mild conditions; at 60 °C without addition of any catalyst. Among the three urethanes, that having 4‐nitrophenoxycarbonyl group 1c was the most reactive to give poly(BLG) efficiently, as was expected from the highly electron deficient nature of the nitrophenoxycarbonyl group. On the other hand, the urethane 1a having phenoxycarbonyl group was also efficiently converted into poly(BLG), in spite of the intrinsically less electrophilicity of the phenoxycarbonyl group. In addition, the successful formation of poly(BLG) by the reaction of 1a favored its diluted concentration (0.1 M) much more than 2.0 M, the optimum initial concentration for 1c . ¹H NMR spectroscopic analyses of the reactions in situ revealed that the predominant pathway from 1 to poly(BLG) involved the intramolecular cyclization of 1 into the corresponding N‐carboxyanhydride, with release of phenol and its successive ring‐opening polymerization with release of carbon dioxide. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2649–2657, 2008     

Peptide block copolymers by N‐carboxyanhydride ring‐opening polymerization and atom transfer radical polymerization: The effect of amide macroinitiators

The synthesis of polypeptide‐containing block copolymers combining N‐carboxyanhydride (NCA) ring‐opening polymerization and atom transfer radical polymerization (ATRP) was investigated. An amide initiator comprising an amine function for the NCA polymerization and an activated bromide for ATRP was used. Well‐defined polypeptide macroinitiators were obtained from γ‐benzyl‐L ‐glutamate NCA, O‐benzyl‐serine NCA, and N‐benzyloxy‐L ‐lysine. Subsequent ATRP macroinitiation from the polypeptides resulted in higher than expected molecular weights. Analysis of the reaction products and model reactions confirmed that this is due to the high frequency of termination reactions by disproportionation in the initial phase of the ATRP, which is inherent in the amide initiator structure. In some cases selective precipitation could be applied to remove unreacted macroinitiator to yield well‐defined block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Synthesis,characterization, and physical properties of new copolymers of poly(amino acid)–urethane—copolymers of γ‐methyl‐L‐glutamate‐N‐carboxyanhydride and urethane prepolymer

New copolymers of amino acid and urethane (PAU), in which a polyurethane segment was combined with poly(γ‐methyl‐L‐glutamate) (PMLG) of various contents, were synthesized by the copolymerization of the polyurethane prepolymer (UPP) having isocyanate groups at both terminals of the chain and γ‐methyl‐L ‐glutamate‐N‐carboxyanhydride (NCA) to improve the elastic recovery and adhesion of PMLG for application of PMLG to synthetic leather. The copolymerization of the UPP with NCA was carried out by applying the reactivity of isocyanate and the polymerization mechanism of NCA using the primary amine and tertiary amine as initiators. Infrared (IR) and ¹³C‐NMR spectra of these PAUs as well as the chemical analysis of the PAU intermediates showed that the PAUs would have a multiblock–triblock structure: namely, the PAUs consisted of the block copolymer segments of urethane and a small amount of PMLG at the center of the copolymer chain and most of the PMLG at both terminals of the copolymer chain. The elastic recovery and adhesion of these PAUs were significantly larger than those of the PMLG with the maintenance of a good sense of touch, which was a unique asset of PMLG. Furthermore, it was found that the PAUs had intermediary moisture permeability between that of PMLG and polyurethane. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 383–389, 1999     

α–γ transition in nylon 6

The α to γ transition that occurs in nylon 6 upon iodine treatment was investigated by infrared spectroscopy, differential thermal analysis, and x-ray diffraction techniques. Thin films of nylon (0.2 mil) were treated in either iodine–potassium iodide aqueous solution or in iodine vapor. Very short treatment times, in the order of 30 sec, were found to effect the transition when a solution 0.5M with respect to iodine was used. The infrared spectra of the iodine nylon complexes formed from either the α- or γ-nylon 6 treated in vapor or dissolved iodine were all similar. This is an indication that molecular iodine is the active species in forming the complex. The temperature of the washing solution used to remove the iodine from the nylon determines whether an α-nylon 6 or γ-nylon 6 is obtained from the complex after washing. Nylon 6 plaque surfaces and thin films are similar in their behavior towards the iodine treatment. The γ-nylon 6 is a stable modification at all temperatures below its melting point. The conversion of the γ form back to the α modification can occur only if the hydrogen bonding is severely affected, e.g., by phenol treatment, iodine treatment, melting, etc. Infrared spectroscopy provided no evidence for an α–γ transition in nylon 6 on heating the sample continuously through its melting point. The shapes of the melting peaks in the above two modifications of nylon 6 were sufficiently different to provide a means of identifying the two crystalline forms.     

Lipase-catalyzed ring-opening polymerization of α-methyl-δ-valerolactone and α-methyl-ε-caprolactone

Lipase-catalyzed ring-opening polymerization of α-methyl-substituted medium-size lactones, α-methyl-δ-valerolactone and α-methyl-ε-caprolactone, were carried in bulk. Immobilized lipase derived from Candida antarctica is active in the polymerization of both monomers. The polymerization proceeds under mild reaction conditions to give the corresponding aliphatic polyester having a hydroxy group at one end and a carboxylic acid group at the other.