Fe2O3 nanoparticles dispersed unsaturated polyester resin based nanocomposites: effect of gamma radiation on mechanical properties

ABSTRACT

In this work, unsaturated polyester resin (UPR) matrix based nanocomposite was fabricated using synthesized Fe₂O₃ nanoparticle as reinforcement and methyl ethyl ketone peroxide as curing agent by solution casting method. The Fe₂O₃ nanoparticles were synthesized using the sol–gel method and the formation of nanoparticle was confirmed by X-ray diffraction, Scanning electron microscope, Energy dispersive spectrometry analysis. Interactions between metal oxide nanoparticles and polymer molecules in fabricated nanocomposite were investigated by Fourier transform infrared spectrometer analysis. Pure UPR and Fe₂O₃/UPR composite were irradiated with various gamma radiation doses (0–15?kGy). At the 0?kGy (without radiation), the nanoparticles loaded composite showed better mechanical properties (increased in tensile strength and Young’s modulus and decreased in elongation) compared to that of pure UPR sheet. At the 5?kGy radiation dose, the tensile strength and Young’s modulus were further increased; whereas, the elongation was decreased in both samples.     

Synthesis and Optical Properties of SiO2-Coated CeO2 Nanoparticles

Silica (SiO₂)-coated ceria (CeO₂) nanoparticles were prepared using water-in-oil microemulsion. Polyoxyethylene (15) cetylether and cyclohexane were used as a surfactant and organic solvent. SiO₂-coated CeO₂ nanoparticles were obtained by hydrolysis of metal alkoxide (tetraethylorthosilicate, TEOS) in the solution containing CeO₂ precursor nanoparticles. The effects of CeO₂ sources (Ce metal salt) and CeO₂ particle-forming agents on the morphology of SiO₂–CeO₂ particles were investigated. Observation via transmission electron microscopy revealed that the type of particle-forming agent affected the nanoparticles' morphology and that CeO₂ nanoparticles were spherically coated with SiO₂ when using oxalic acid ((COOH)₂) as a particle-forming agent of CeO₂. Furthermore, the transmittance of the particles was high in the visible region (above 400 nm) and decreased in the ultraviolet region.     

Preparation of Organic–Inorganic Multifunctional Nanocomposite Coating via Sol-Gel Routes

The inorganic–organic nanocomposite coatings are prepared on poly(methyl methacrylate) (PMMA) substrate by the spinning technique which involves incorporating homogeneously nanosized ZnO particle into the molecular inorganic–organic hybrid matrices. The hybrid matrices are derived from tetraethoxyasilane (TEOS) and 3-glycidoxypropyltrimethoxyailane (GLYMO). To avoid the destruction of the polymer structure caused by ZnO and modify the interface between nanoparticles and organic groups, ZnO was first surface-coated with SiO₂ from hydrolyzed TEOS using ammonia water as catalyst. The coatings thus obtained are dense, flexible, abrasion resistant and UV absorbent.     

Effect of Polyethylene Functionalization on Mechanical Properties and Morphology of PE/SiO2 Composites

In this study composites of high density polyethylene (HDPE) with various SiO₂ content were prepared by melt compounding using maleic anhydride grafted polyethylene (PE-g-MAH) as a compatibilizer. The composites containing 2, 4 and 6% by weight of SiO₂ particles were melt-blended in a co-rotating twin screw extruder. In all composites, polyethylene-graft-maleic anhydride copolymer (PE-g-MAH, with 0.85% maleic anhydride content) was added as a compatibilizer in the amount of 2% by weight. Morphology of inorganic silica filler precipitated from emulsion media was investigated. Mechanical properties and composite microstructure were determined by tensile tests and scanning electron microscopy technique (SEM). Tensile strength, yield stress, Young's modulus and elongation at break of PE/SiO₂ composites were mainly discussed against the properties of PE/PE-g-MAH/SiO₂ composites. The most pronounced increase in mechanical parameters was observed in Young's modulus for composites with polyethylene grafted with maleic anhydride. The increase in the E-modulus of PE/PE-g-MAH/SiO₂composites was associated with the compatibility and improvement of interfacial adhesion between the polyethylene matrix and the nanoparticles, leading to an increased degree of particle dispersion. This finding was verified on the basis of SEM micrographs for composites of PE/PE-g-MAH/4% by weight of SiO₂. The micrographs clearly documented that addition of only 2 wt% of the compatibilizer changed the composite morphology by reducing filler aggregates size as well as their number. Increased adhesion between the PE matrix and SiO₂ particles was interpreted to be a result of interactions taking place between the polar groups of maleic anhydride and silanol groups on the silica surface. These interactions are responsible for reduction of the size of silica aggregates, leading to improved mechanical properties.     

Y2SiO5:Tb phosphor particles prepared from colloidal and aqueous solutions by spray pyrolysis

Green-emitting Y₂SiO₅:Tb phosphor particles with fine size, spherical shape, filled morphology, high crystallinity, and good brightness were synthesized by a spray pyrolysis process. The effect of silicon precursor type on the morphology, crystal structure, crystallinity, and photoluminescence efficiency of Y₂SiO₅:Tb phosphor particles was investigated. The particles prepared from an artificial colloidal solution obtained by dispersing fumed silica particles had a pure monoclinic X2 crystalline phase, which is more appropriate for application to displays, after post-treatment at 1300 °C. On the other hand, the particles prepared from 100% tetraethyl orthosilicate (TEOS) reagent had an X2 phase and small amounts of X1 and impurity phases such as Y₂Si₂O₇ and Y_4.67Si₃O₁₃ due to the phase-segregation characteristics of the TEOS precursor. The photoluminescence characteristics of Y₂SiO₅:Tb phosphor particles were strongly affected by the silicon source used. The photoluminescence intensities increased with the fumed silica/TEOS ratio. The particles prepared from 100% fumed silica showed the maximum photoluminescence intensity, which is 22% higher than that of particles prepared from 100% TEOS. PACS 81.20.Rg; 78.55.Hx; 78.40.Ha; 81.05.Hd; 81.40.Tv     

Optical properties of sol-gel fabricated Mn/SiO2 nanocomposites: Observation of surface plasmon resonance in Mn nanoparticles

Manganese nanoparticles were grown in silica glass and silica film on silicon substrate by annealing of the sol-gel prepared porous silicate matrices doped with manganese nitrate. Annealing of doped porous silicate matrices was performed at various conditions that allowed to obtain the nanocomposite glasses with various content of metallic Mn. TEM of Mn/SiO₂ glass indicates the bimodal size distribution of Mn nanoparticles with mean sizes of 10.5 nm and 21 nm. The absorption and photoluminescence spectra of Mn/SiO₂ glasses were measured. In the absorption spectra at 300 nm (4.13 eV) we observed the band attributed to the surface plasmon resonance in Mn nanoparticles. The spectra proved the creation of Mn²⁺ and Mn³⁺ ions in silica glass as well. The absorption spectra of Mn/SiO₂ glasses annealed in air prove the creation of manganese oxide Mn₂O₃. The measured reflection spectra of Mn/SiO₂ film manifest at 240-310 nm the peculiarity attributed to surface plasmons in Mn nanoparticles.     

Effect of the dispersibility of ZrO2 nanoparticles in Ni-ZrO2 electroplated nanocomposite coatings on the mechanical properties of nanocomposite coatings

ZrO₂ nanoparticles was uniformly co-deposited into a nickel matrix by electroplating of nickel from a Watts bath containing particles in suspension which were monodispersed with dispersant under DC electrodeposition condition. It was found that morphology, orientation and hardness of the nanocomposite coatings with monodispersed ZrO₂ nanoparticles had lots of difference from the nanocomposite coatings with agglomerated ZrO₂ nanoparticles and pure nickel coatings. Especially, the result of hardness showed that only a very low volume percent (less than 1 wt.%) of monodispered ZrO₂ nanoparticles in Ni-ZrO₂ nanocomposite coatings would result in higher hardness of the coatings. The hardness of Ni-ZrO₂ nanocomposite coatings with monodispersed and agglomerated ZrO₂ nanoparticles were 529 and 393 HV, respectively. The hardness value of the former composite coatings was over 1.3 times higher than that of the later. All these composite coatings were two-three times higher than that of pure nickel plating (207 HV) prepared under the same condition. The strengthening mechanisms of the Ni-ZrO₂ nanocomposite coatings based on a combination of grain refinement strengthening from nickel matrix grain refining and dispersion strengthening from dispersion state of ZrO₂ nanoparticles in the coatings.     

In vivo Monitoring of Organ-Selective Distribution of CdHgTe/SiO2 Nanoparticles in Mouse Model

CdHgTe/SiO₂ nanoparticles were prepared by SiO₂ capping on the surface of CdHgTe QDs. The characteristics, such as optical spectra, photostability, size and cell toxicity were investigated. The dynamic distribution of CdHgTe/SiO₂ nanoparticles was in vivo monitored by near infrared fluorescence imaging system. CdHgTe/SiO₂ nanoparticles acted as a novel fluorescence probe have a maximum fluorescence emission of 785 nm and high photo-stability. The hydrodynamic diameter of CdHgTe/SiO₂ nanoparticles could be adjusted to 122.3 nm. Compared to CdHgTe QDs, inhibitory effects of CdHgTe/SiO₂ nanoparticles on proliferation of HCT116 cells decreased to a certain extent. CdHgTe/SiO₂ nanoparticles had their specific dynamic distribution behavior, which provided new perspectives for bio-distribution of nanoparticles.     

In situ sol-gel composition of multicomponent hybrid precursors to luminescent novel unexpected microrod of Y2SiO5:Eu employing different silicate sources

Y₂SiO₅ doped with Eu³⁺ were in situ synthesized by a hybrid precursor assembly sol-gel technology employing four different silicate sources, 3-aminopropyl-trimethoxysilane (APMS), 3-aminopropyl-triethoxysilane (APES), 3-aminopropyl-methyl-diethoxysilane (APMES) and tetraethoxysilane (TEOS), respectively. The SEM result shows that there exist some novel unexpected morphological microrod structures owing to using the crosslinking reagents other than TEOS as silicate source. The photoluminescent properties of Y₂SiO₅:Eu³⁺ have been studied as a function of Eu³⁺ doping concentration. A cross-relaxation process between identical Eu³⁺ ions results in the quenching of the ⁵D₁ emission for high concentration sample.     

Pre-hydrolysed ethyl silicate as an alternative precursor for SiO2-coated carbon nanofibers

This work reported basically aims at understanding the extent of SiO₂-coated carbon nanofibers using two different sol-gel precursors for the silicate glass. The silicate precursors employed were tetraethoxysilane (TEOS) and pre-hydrolysed ethyl silicate. The first route consisted in an acid hydrolysis and polycondensation of the TEOS and the second one in a polycondensation of the pre-hydrolysed ethyl silicate. The techniques of Fourier Infra Red spectroscopy, thermogravimetric analysis, scanning electron microscopy and X-ray diffraction were used to characterize the materials obtained. Both kinds of SiO₂ precursor can coat the CNF effectively. However, the use of pre-hydrolysed ethyl silicate (faster gelation times and higher surface areas) can be considered a low-cost and facile alternative with respect to the use of TEOS, to obtain industrially silica-coated carbon nanofibers.     

Preparation and characterization of size-controlled CeO2 nanoparticles coated with SiO2

CeO₂@SiO₂ (core@shell) nanoparticles were prepared by means of chemical precipitation technique. Results from X-ray diffraction, transmission electron microscopy (TEM), and Zeta-potential analyses provide strong microscopic and spectroscopic evidences to prove that CeO₂ particles have been encapsulated inside amorphous SiO₂ shell. As revealed from TEM investigations, the average grain size of CeO₂@SiO₂ is significantly smaller than that of uncoated CeO₂ nanoparticles prepared under the same conditions, indicating it is an effective method to restrict the grain enlargement of nanocrystalline CeO₂ by coating a thin layer of SiO₂ at elevated temperatures. The CeO₂@SiO₂ nanoparticles display a similar surface electric character behavior to that of SiO₂, and its dispersibility in water is improved.     

Effect of montmorillonite on abrasion resistance of SiO2-filled polybutadiene

The effect of organically modified montmorillonite (OMMT) and silane coupling agent on the abrasion resistance of SiO₂-filled butadiene rubber (BR) vulcanizates has been investigated. Various amounts of OMMT are added into SiO₂-filled BR vulcanizates. A silane coupling agent, bis-(3-triethoxysilyl propyl) tetrasulfide (Si69), is used to modify OMMT during the masterbatch preparation for evaluating the influence of surface treatment on the abrasion resistance. Incorporation of OMMT into BR results in deterioration of the abrasion resistance as compared to unfilled BR vulcanizate due to poor dispersion of OMMT and insufficient interfacial adhesion between OMMT and BR matrix. The use of Si69 improves dispersion of OMMT particles and rubber/OMMT adhesion, resulting in abrasion resistance enhancement of BR/OMMT vulcanizates. By using similar compounding conditions as those for BR/OMMT vulcanizate, nanodispersion of OMMT in BR/SiO₂/OMMT vulcanizate has been achieved as judged by the high viscosity of the SiO₂-filled BR compound. This improved dispersion leads to better abrasion resistance of the BR/SiO₂/OMMT than that of the BR/SiO₂ composite. Utilization of Si69 slightly affects the DIN volume loss of BR/SiO₂/OMMT vulcanizates and the abrasion pattern.     

Enhanced photoluminescence of ZnO-SiO2 nanocomposite particles and the analyses of structure and composition

Stable blue-green photoluminescent ZnO-SiO₂ nanocomposite particles exhibiting quantum efficiency as high as 34.8% under excitation at 360 nm were prepared using a spray-drying process from a feed solution that contained both luminescent ZnO nanoparticles synthesized by a sol-gel method and commercially-available SiO₂ nanoparticles. The effects of silica nanoparticle size and SiO₂-to-ZnO concentration ratio on the PL properties of the composite particles were investigated. The internal structure and chemical composition were investigated in detail using elemental mapping, which revealed that ZnO nanoparticles were well-dispersed within silica nanoparticle matrix. At a LiOH concentration of 0.23 M, the predicted ZnO crystallite diameter before and after spray drying was approximately constant at 3.3 and 3.6 nm, respectively. This result indicates that ZnO particle growth was inhibited and therefore the PL property of ZnO nanoparticles was stably preserved in the composite.     

Preparation of superhydrophobic poly(methyl methacrylate)-silicon dioxide nanocomposite films

Superhydrophobic poly(methyl methacrylate)-SiO₂ (coded as PMMA-SiO₂) nanocomposite films with micro-nanohierarchical structure were prepared via a simple approach in the absence of low surface-energy compounds. By spin-coating the suspension of hydrophobic silica (SiO₂) nanoparticles dispersed in PMMA solution, target nanocomposite films were obtained on glass slides. The wetting behavior of PMMA-SiO₂ nanocomposite films was investigated in relation to the dosage of SiO₂ nanoparticles dispersed in PMMA solution. It was found that hydrophilic PMMA film was transferred to superhydrophobic PMMA-SiO₂ nanocomposite films when hydrophobic SiO₂ nanoparticles were introduced into the PMMA solution at a high enough dosage (0.2 g and above). Resultant PMMA-SiO₂ nanocomposite films had a static water contact angle of above 162°, showing promising applications in selfcleaning and waterproof for outer wall of building, outer covering for automobile, sanitary wares, and so forth.     

Influence of remaining C on hardness and emissivity of SiC/SiO2 nanocomposite coating

SiC/SiO₂ nanocomposite coating was deposited by electron beam-physical vapor deposition (EB-PVD) through depositing SiC target on pre-oxidized 316 stainless steel (SS) substrate. High melting point component C remained and covered on the surface of ingot after evaporation. When SiC ingot was reused, remaining C had an effect on the composition, hardness and emissivity of SiC/SiO₂ nanocomposite coating. The composition of ingot and coating was studied by X-ray photoelectron spectroscopy (XPS). The influence of remaining C on hardness and spectral normal emissivity of SiC/SiO₂ nanocomposite coating was investigated by nanoindentation and Fourier transform infrared spectrum (FTIR), respectively. The results show that remaining C has a large effect on hardness and a minor effect on spectral normal emissivity of SiC/SiO₂ nanocomposite coating.     

Preparation and Characterization of Hybrid Nanocomposites Containing Polyethylene Oxide Segments and SiO2 Through a Dual-curing Process

Hybrid organic–inorganic nanocomposites containing SiO₂ and polyethylene oxide (PEO) segments linked to an epoxy acrylate (EA) network were prepared through a dual-cure process involving photopolymerization and subsequent condensation of alkoxysilane groups using 3-isocyanatopropyltriethoxysilane-terminated PEO (PEO-[Si(OC₂H₅)₃]₂) and tetraethoxysilane (TEOS) as precursors, 3-methacryloxypropy ltrimethoxysilane (MEMO) as coupling agent, and EA as prepolymer. The chemical structures of the products were characterized by Fourier transform infrared (FTIR) spectroscopy. Transmission electron microscopy (TEM), atomic force microscopy (AFM), and X-ray diffractometry (XRD) showed that the in situ generated nano-SiO₂ dispersed uniformly in the EA matrix and the organic and inorganic phase interacted strongly. Dynamic mechanical analysis (DMA) and mechanical properties results indicated that the glass transition temperature (Tg) and the impact strength of the hybrid nanocomposites increased simultaneously with increase of the SiO₂ content.     

Ultrasound-assisted fast encapsulation of metal microparticles in SiO2 via an interface-confined sol-gel method

Although the traditional Stoˇber process-based methods are widely used for encapsulation of metal nanoparticles in SiO₂, these time-consuming methods are not effective for coating metal microparticles with a uniform SiO₂ layer of desired thickness. Herein, an ultrasound-assisted, interface-confined sol–gel method is proposed for fast encapsulation of metal microparticles in SiO₂, and the encapsulation of Sn microparticles is chosen as an example to illustrate its feasibility. The proposed method involves covering metal microparticles with liquid films that contain water, alcohol, surfactant (Span-80) and catalyst (NH₄F) and then ultrasonically dispersing these particles into cyclohexane, where tetraethylorthosilicate (TEOS) is added. To ensure the hydrolysis-condensation reactions of TEOS occurring at the particle-cyclohexane interface so that the formed SiO₂ is coated on the particles, the microparticles should be well dispersed into cyclohexane with the liquid films being not broken away from their surfaces. It is found that the assistance of probe sonication and the addition of surfactant are crucial to achievement of a good dispersion of metal microparticles in cyclohexane. And using high-viscosity alcohol (namely glycerol), controlling the volume ratio of water to alcohol and the amount of water, and choosing a suitable ultrasonic power are essential for preventing the formation of free SiO₂ (namely SiO₂ that is not coated on the particles), which is a result that the liquid films escape from the particle surfaces under ultrasonic cavitation. Our results have also revealed that the thickness of SiO₂ layer can be adjusted by changing the reaction time or the total amount of water. In particular, the thickness of SiO₂ layer can be easily raised by simply repeating the encapsulation procedure. Compared with the traditional Stoˇber process-based methods, the proposed method is time-saving (reaction time: about 30 min vs. more than 12 h) and extremely effective for coating microparticles with a continuous, uniform SiO₂ layer of desired thickness.     

Preparation and Characterization of Poly(Vinyl Alcohol) (PVA)/SiO2, PVA/Sulfosuccinic Acid (SSA) and PVA/SiO2/SSA Membranes: A Comparative Study

Abstract

New organic–inorganic nanocomposites based on PVA, SiO₂ and SSA were prepared in a single step using a solution casting method, with the aim to improve the thermomechanical properties and ionic conductivity of PVA membranes. The structure, morphology, and properties of these membranes were characterized by Raman spectroscopy, small- and wide-angle X-ray scattering (SAXS/WAXS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), water uptake (Wu) measurements and ionic conductivity measurements. The SAXS/WAXS analysis showed that the silica deposited in the form of small nanoparticles (～ 10?nm) in the PVA composites and it also revealed an appreciable crystallinity of pristine PVA membrane and PVA/SiO₂ membranes (decreasing with increasing silica loading), and an amorphous structure of PVA/SSA and PVA/SSA/SiO₂ membranes with high SSA loadings. The thermal and mechanical stability of the nanocomposite membranes increased with the increasing silica loading, and silica also decreased the water uptake of membranes. As expected, the ionic conductivity increased with increasing content of the SSA crosslinker, which is a donor of the hydrophilic sulfonic groups. Some of the PVA/SSA/SiO₂ membranes had a good balance between stability in aqueous environment (water uptake), thermomechanical stability and ionic conductivity and could be potential candidates for proton exchange membranes (PEM) in fuel cells.     

The effect of SiO2 and TiO2 nanoparticles on physical properties of SrFe12O19 nanoparticle

In order to obtain SrFe₁₂O₁₉ nanoparticles, thermal treatment method was employed, and afterwards SiO₂ and TiO₂ nanoparticles were embedded in SrFe₁₂O₁₉ matrix SrFe₁₂O₁₉ nanoparticles. The SiO₂ and TiO₂ nanoparticles' effects were set in SrFe₁₂O₁₉ matrix and experimental techniques which include, transmission electron microscopy (TEM), x-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), x-ray analysis (EDX) and field emission scanning electron microscope (FESEM) were used in studying the physical properties of the prepared nanoparticles. The precise DASF method (derivation of absorption spectrum fitting) was employed in examining the optical properties. The addition of SiO₂ and TiO₂ nanoparticles to SrFe₁₂O₁₉ matrix resulted in the reduction of energy band gap values in compare with the SrFe₁₂O₁₉ nanoparticles. The chemical analysis of SrFe₁₂O₁₉/SiO₂, SrFe₁₂O₁₉ nanoparticles, and SrFe₁₂O₁₉/TiO₂ nanocomposites was carried out using energy dispersion X-ray analysis (EDX). Ferromagnetic behaviors were demonstrated by SrFe₁₂O₁₉ nanoparticles, SrFe₁₂O₁₉/SiO₂ and SrFe₁₂O₁₉/TiO₂ nanocomposites, and the behaviors were validated through the use of a vibrating sample magnetometer (VSM). A wasp-waist was observed through hysteresis loop of SrFe₁₂O₁₉/SiO₂ nanocomposites, implying the presence of the two magnetic phases; soft and hard ferromagnetic.     

Controlled synthesis and relationship between luminescent properties and shape/crystal structure of Zn2SiO4:MN phosphor

Mn-doped Zn₂SiO₄ phosphors with different morphology and crystal structure, which show different luminescence and photoluminescence intensity, were synthesized via a low-temperature hydrothermal route without further calcining treatment. As-synthesized zinc silicate nanostructures show green or yellow luminescence depending on their different crystal structure obtained under different preparation conditions. The yellow peak occurring at 575 nm comes from the β-phase zinc silicate, while the green peak centering at 525 nm results from the usual α-phase zinc silicate. From photoluminescence spectra, it is found that Zn₂SiO₄ nanorods have higher photoluminescence intensity than Zn₂SiO₄ nanoparticles. It can be ascribed to reduced surface-damaged region and high crystallinity of nanorods.