Mössbauer Spectroscopic Studies of the Hydroxofluorostannate(IV) Complexes

Mössbauer isomer shifts of ¹¹⁹Sn in a series of complexes K₂Sn(OH)_6-mF_m observed at 78 K were ?0.05, ?0.05, ?0.24, ?0.27 and ?0.40 mm s^?1, respectively, for m=0, 2, 4, 5 and 6. These IS values were linearly related to both m and (the average Pauling electronegativity of the ligands): . The IS straight line was compatible within experimental error with the one reported by Parish and Row-botham for the hexahalogenostannate complexes SnX₄Y₂², namely, The revised IS straight line including both series of complexes could be expressed by the equation Quadrupole splittings observed in the complexes of m = 2,4 and 5 were 1.16, 0.80 and 0.73 mm s^?1 respectively. They were linearly related to both m and .     

Polymerization of Cyclosiloxanes. I. Kinetic Studies on Living Polymer—Octamethylcyclotetrasiloxane Systems

The kinetics of the anionic polymerization of octamethylcyclotetrasiloxane (D₄) initiated by α-methylstyrene living polymer in tetrahydrofuran was studied. The following kinetic scheme was postulated: Initiation: Propagation: where S^- and M represent the initiator and D₄, respectively. At a living end concentration of 0.0377 mole/l. and a monomer concentration of 1.5 mole/l. in tetrahydrofuran at 25°C. the following kinetic data were obtained: k₁ = 2.3 × 10^?4 l./mole-sec., k₂ < 2.3 × 10^?5 sec.^?1, k₃ = 2.75 × 10^?2l./mole-sec. k₄ ≈ 1.17 × 10^?2 sec.^?1, K₁ > 10 l./mole and K₂ ≈ 2.35 l./mole. The rate constants k₁ and k₃ were found to be dependent on the concentration of anions. This is attributed to the dissociation of ion pairs to free ions at lower concentration. Under the experimental conditions studied the majority of the anions were present in the form of ion pairs. The reactivity of the free ions is about 100 times greater than that of ion pairs. There is no temperature effect on K₂, indicating zero ΔH and positive ΔS in the propagation reaction.     

Representable reference density matrices induced by information theory

A class of reference full density matrices and their reduced density matrices is presented. These density matrices are designed to be of value as references from which to describe and measure the effects of electron correlation in atoms, molecules, and solids. A given reference full density matrix is constructed to contain the least possible information consistent with having the (recognized) symmetry properties of—and reducing to the 1-matrix of—a given “true” full density matrix (which in a typical application is constructed from a correlated variational wave function). Therefore, the reduced density matrices derived from are representable and depend only upon the 1-matrix of and the (recognized) symmetry properties of for their construction. Furthermore, the property of containing the least possible information consistent with the given constraints makes these reference density matrices ideally suitable as references from which to describe the electron correlation contained in the “true” full density matrix .     

Synthesis and NMR analysis of 2,4-dichloro-1-pentene and of 2,4-dichloro-1-pentene-1-d1

The compound 2,4-dichloro-1-pentene-1-d₁ ( 1 ) was synthesized starting from and CH?CNa. In the last stage of the synthesis on activated carbon-HgCl₂ catalyst), ( 3 ) were formed together with ( 1 ). The NMR parameters of ( 1 ), its cis and trans isomers and ( 2 ) were obtained in C₆D₆ solution at 100 MHz. Theoretical spectra of ( 1 ) at 60 MHz were simulated with the aid of a computer, using as input the NMR parameters obtained at 100 MHz and good agreement with the experiment was obtained.     

Rate constants and kinetic isotope effects for hydrogen/deuterium abstraction by chlorine atoms from the chloromethyl group in CH2ClCH2Cl,CD2ClCD2Cl,CH2ClCHCl2, and CH2ClCDCl2

The abstraction of hydrogen and deuterium from 1,2-dichloroethane, 1,1,2-trichloroethane, and two of their deuterated analogs by photochemically generated ground state chlorine atoms has been investigatedin the temperature range 0–95°C using methane as a competitor. Rate constants and their temperature coefficients are reported for the following reactions Over the temperature range of this investigation an Arrhenius law temperature dependence was observed in all cases. Based on the adopted rate coefficient for the chlorination of methane [L.F. Keyser, J. Chem. Phys., 69 , 214 (1978)] which is commensurate with the present temperature range, the following rate constant values (cm³ s^?1) are obtained: The observed pure primary, and mixed primary plus α- and β3-secondary kinetic isotope effects at 298 K are k₃/k₆ = 2.73 ± 0.08, and k₁/k₂ = 4.26 ± 0.12, respectively. Both show a normal temperature dependence decreasing to k₃/k₆ = 2.39 ± 0.06 and k₁/k₂ = 3.56 ± 0.09 at 370 K. Contrary to some simple theoretical expectations, the kinetic isotope effect for H/D abstraction decreases with increasing number of chlorine substituents in the geminal group in a parallel manner to the trend established previously for C1-substitution in the adjacent group. The occurrence of a β-secondary isotope effect, k₄/k₅, is established; this effect suggests a slight inverse temperature dependence.     

The acetyl radicals CH3CO· and CD3CO· studied by flash photolysis and kinetic spectroscopy

Ultraviolet absorption spectra have been characterized for the acetyl-h₃ and acetyl-d₃ radicals, which were generated by the flash photolysis of the corresponding acetones. The spectra are broad and intense, with values of the extinction coefficient at the respective maxima estimated as: ?CH₃CO(215) = (1.0 ± 0.1) × 10⁴ L/mol·cm and ?CD₃CO(207.5) = (1.0 ± 0.05) × 10⁴ L/mol·cm. Rate constants for the reactions of mutual interaction were estimated as: k = 3.5 × 10¹⁰ L/mol·s and k = 3.4 × 10¹⁰ L/mol·s. Rate constants for the reactions of cross interaction were estimated as: k = 8.6 × 10¹⁰ L/mol·s and k = 5.2 × 10¹⁰ L/mol·s. The related values of the cross interaction ratios k/(kk)^1/2 = 2.6 and k/(kk)^1/2 = 1.6 do not differ significantly from the statistical value of 2. The participation of the radical displacement reactions was estimated in terms of the fractions k/k = 0.38 and k/k = 0.47. Corroborative spectra were obtained from the flash photolysis of methyl ethyl ketone and biacetyl, and the relative rates of the competing primary processes were estimated from the relative peak heights of the acetyl and methyl radicals in each system.     

Anodic Deposition of Iodide Ion at Silver Electrode

Anodic deposition of iodide ion on silver at 25° in aqueous (0.5 M KNO₃) and in 90% (w/w) ethanol-water (0.05 M KClO₄) solutions was studied galvanostatically. The exchange current density, transfer coefficient and the rate constants for the electrode reaction were evaluated. The experimental results revealed that the overall electrode reaction and the charge-transfer step was the same one, i.e., , which might be assumed highly reversible as reflected by the exchange current density (i) and transfer coefficient (α). The numerical values of the rate constants, and at 25° were, in aqueous solution, 1.02×10^?5 and 2.88×10^?6, and in ethanol solution, 2.88×10^?5 and 6.3×10^?6 cm sec^?1, respectively.     

Electron impact studies. CI—negative ion mass spectra of the carbonyl group. The Aryl?CH2?CO- and Aryl?(CH2)2?CO- systems

Fragmentations of the molecular anions of m- and p-nitrophenyl-CH₂? CO? R yield nitrobenzyl anions in the ion source when R = Ph, but the corresponding ion from the system where R = Me is only formed after collision activation. o- and p-Nitrophenyl parent anions undergo β-cleavage to the carbonyl centre to produce nitrobenzyl anions. Pronounced rearrangement peaks are noted in the spectra of o-nitrophenyl- compounds. Labelling studies indicate the identity of the eliminated species, but the mechanisms of the rearrangements are complex.     

Shock tube study of cyanogen oxidation kinetics

Mixtures of cyanogen and nitrous oxide diluted in argon were shock-heated to measure the rate constants of A broad-band mercury lamp was used to measure CN in absorption at 388 nm [B²Σ⁺(v = 0) ← X²Σ⁺(v = 0)], and the spectral coincidence of a CO infrared absorption line [v(2 ← 1), J(37 ← 38)] with a CO laser line [v(6 → 5), J(15 → 16)] was exploited to monitor CO in absorption. The CO measurement established that reaction (3) produces CO in excited vibrational states. A computer fit of the experiments near 2000 K led to An additional measurement of NO via infrared absorption led to an estimate of the ratio k₅/k₆: with k₅/k₆ ? 10^3.36±0.27 at 2150 K. Mixtures of cyanogen and oxygen diluted in argon were shock heated to measure the rate constant of and the ratio k₅/k₆ by monitoring CN in absorption. We found near 2400 K: and The combined measurements of k₅/k₆ lead to k₅/k₆ ? 10^?3.07 exp(+31,800/T) (±60%) for 2150 ≤ T ≤ 2400 K.     

Reaction of CF3 radicals with H2O and D2O

The reaction of CF₃ radicals with H₂O (D₂O) has been studied over the range of 533–723 K using the photolysis and the pyrolysis of CF₃I as the free radical source. Arrhenius parameters for the reactions where X = H or D, relative to CF₃ radical recombination are given by where k/k is in cm^3/2/mol^1/2·s^1/2 and θ = 2.303RT/cal/mol. The activation energy and the primary kinetic isotope effect have been compared with those derived from the BEBO method.     

Oxidation studies with peroxomonophosphoric acid. II. A kinetic and mechanistic study of dimethyl sulfoxide oxidation in acid and alkaline media

The kinetics of dimethyl sulfoxide (DMSO) oxidation by peroxomonophosphoric acid (PMPA) in aqueous medium at 308 K and I = 0.4 mol/dm³ follow the rate expressions In the pH range from 0 to 2, where k₁ and k₂ are 5.092 × 10^?1 dm³/mol sec and ? 0, respectively; in the pH range from 4 to 7, where k₂ = 8.127 × 10^?3 and k₃ = 2.90 × 10^?3 dm³/mol sec; and in the pH range from 10 to 13.6, where k₄ ? 0, and k₅ = 3.08 × 10^?2 dm³/mol sec. The reaction is interpreted in terms of mechanisms involving an electrophilic and a nucleophilic attack of the peroxomonophosphoric acid species, respectively, in acid and alkaline regions, on the sulfur atom of the sulfoxide molecule giving rise to S-type transition states followed by oxygen-oxygen bond fission to form the products.     

The addition of methyl radicals to hexafluoroacetone

The reaction of methyl radicals (Me) with hexafluoroacetone (HFA), generated from ditertiary butyl peroxide (dtBP), was studied over the temperature range of 402–433 K and the pressure range of 38–111 torr. The reaction resulted in the following displacement process taking place: where TFA refers to trifluoroacetone. The trifluoromethyl radicals that were generated abstract a hydrogen atom from the peroxide: such that k_6a is given by: where θ = 2.303RT kcal/mol. The interaction of methyl and trifluoromethyl radicals results in the following steps: Product analysis shows that k₁₇/kk = 2.0 ± 0.2 such that k₁₇ = 10^10.4±0.5M^?1 · s^?1. The rate constant k₅ is given by: It is concluded that the preexponential factor for the addition of methyl radicals to ketones is lower than that for the addition of methyl radicals to olefins.     

Synthese „anorganischer”︁ Tintenfisch-Moleküle

Inorganic Pode-Type Molecules The reaction of monosubstituated polyethylenglykoles [m = 0—4, R = Cl, OCH₃, OAs(CH₃)₂, OSi(CH₃)₃] with amino compounds (CH₃)_xE[N(CH₃)₂]_y(E = Si, x = y = 2; E = Si, x = 1, y = 3; E = P, x = 0, y = 3; E = As, y = 0, y = 3) results in the formation of pode-type molecules of the formula . The synthesis and rearrangement of these compounds by heating is described.     

Kinetics of the reactions Br2 + HCN,BrCN + I−, S(CN)2 + I− in aqueous acid solution

Spectrophotometric methods have been used to obtain rate laws and rate parameters for the following reactions: with k_a, k_b, E_a, E_b having the values 85±5 l./mole · s, 5.7±0.2 s^?1 (both at 298.2°K), and 56±4 and 66±2 kJ/mole, respectively. with k_c=0.106±0.004 l./mole ·s at 298.2°K and E_c=67±2 kJ/mole. with k_d=(3.06 ±; 0.15) × 10^?3 l./mole ·s at 298.2°K and E_d=66±2 kJ/mole. Mechanisms for these reactions are discussed and compared with previous work.     

Kinetic study of the gas-phase reaction c-C5H8 + I2 ⇄ c-C5H6 + 2HI the heat of formation and the stabilization energy of the cyclopentenyl radical

The gas-phase dehydrogenation of cyclopentene to cyclopentadiene catalyzed by iodine in the range 178–283°C has been found to obey a rate law consistent with the slow rate-determining step, \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm I} + {\rm c} - {\rm C}_5 {\rm H}_8 \stackrel{4}{\rightarrow}{\rm HI} + {\rm c} - {\rm C}_5 {\rm H}_7 $\end{document}, log [k₄/(1 mole^?1 sec^?1)] = 10.25 ± 0.08 - (12.26 ± 0.18)/θ, where θ = 2.303 R T in kcal/mole. Surface effects are not important. This value of E₄ leads to a value of DH = 82.3 ± 1 kcal/mole and ΔH_f298 = 38.4 ± 1 kcal/mole. From difference in bond strengths in the alkane and the alkene, the allylic resonance stabilization in the cyclopentenyl radical is 12.6 ± 1.0 kcal/mole, in excellent agreement with the value for the butenyl radical. Arrhenius parameters for the other steps in the mechanism are evaluated. The low value of A₄ (compared with A₄ for cyclopentane) suggests a “tighter” transition state for H-atom abstraction from alkenes than from alkanes.     

Magnesium chloride supported high mileage catalysts for olefin polymerization. XII. Polymerization of ethylene

Polymerizations of ethylene by the MgCl₂/ethylbenzoate/p-cresol/AlEt₃ TiCl₄-AlEt₃/methyl-p-toluate (CW-catalyst) have been studied. The initially formed active site concentration, [Ti] has a maximum value of 50% of total titanium at 50°C and lower values at other temperatures. The Ti decays rapidly to Ti sites with conc. ca. 10 mol %/mol Ti. The rate constants for four chain transfer processes have been obtained at 50°C: for transfer with AlEt₃, k = 2.1 × 10^?4 s^?1 and k = 4.8 × 10^?4 s^?1; for transfer with monomer, k = 3.6 × 10^?3 (M s)^?1 and K = 8.3 × 10^?3 (M s)^?1; for β-hydride transfer, k = 7.2 × 10^?4 s^?1 and k = 4.9 × 10^?4 s^?1; and transfer with hydrogen, k = 4.0 × 10^?3 torr^1/2 s^? and k = 5.1 × 10^?3 torr^1/2 s^?1. The rate constants for the termination assisted by hydrogen is k = 1.7 (M^1/2 torr^1/2 S)^?1. If monomer is assisting termination as was observed for propylene polymerization, then k = 7.8 (M^3/2 s)^?1. Values of all the rate constants can be higher or lower at other temperatures. Detailed comparisons were made with the results of propylene polymerizations. There are more than four times as many Ti active sites for ethylene polymerization than there are for stereospecific polymerization of propylene; the difference is more than a factor of two for the Ti sites. Certain rate constants are nearly the same for both monomers while others are markedly different. Some of the differences can be explained by stereoelectronic effects.     

A shock tube study of the reactions of NH with NO,O2, and O

The reactions of NH(X³Σ⁻) with NO, O₂, and O have been studied in reflected and incident shock wave experiments. The source of NH in all the experiments was the thermal dissociation of isocyanic acid, HNCO. Time-histories of the NH(X³Σ) and OH(X²Π) radicals were measured behind the shock waves using cw, narrow-linewidth laser absorption at 336 nm and 307 nm, respectively. The second-order rate coefficients of the reactions: were determined to be: and cm³ mol⁻¹ s⁻¹, where ƒ and F define the lower and upper uncertainty limits, respectively. The branching fraction of channel defined as k_3b/k_3total, was determined to be 0.19 ± 0.10 over the temperature range of 2940 K to 3040 K.     

Studies on polyyne polymers containing transition metals in the main chain. IV. Polymer synthesis by oxidative coupling of transition metal-bis(acetylide) complexes

The metal-polyyne polymers consisting of transition metals and conjugated tetrayne systems where M represents ? Pt(PBu₃)₂? or ? Pd(PBu₃)₂? moiety were prepared by the oxidative coupling method and characterized by spectral analysis, associated with novel depolymerization giving binuclear transition metal complexes, and      

The kinetics of the reaction: Br + C3H6 ⇌ HBr + C3H5

Studies of the reaction of Br + propylene to produce HBr and allyl radical were made using VLPR (Very Low Pressure Reactor) over the range 263–363 K. Apparent bimolecular rate constants k were found to vary in an inverse manner with the initial concentration of bromine atoms introduced into the reactor. Plots of k against [Br] give straight lines whose intercepts were taken to be the true bimolecular, metathesis rate constant k₁. The reaction scheme is where k₂ ? k₁ and k_?1 [HBr] is negligibly small under our conditions. Arrhenius parameters for k₁ were assigned for linear and bent transition states and shown to give excellent fits to the observed intercepts. where θ = 2.303 RT (kcal mol^?1). The dependence of k on [Br] is accounted for in terms of the reactivity of Br* (²P_1/2) produced in the microwave discharge. The activation energy for the metathesis reaction of Br* with propylene is shown to be very small.     

Unimolecular Gas-Phase Oxidation of Terminal Hydroxy Groups in [FeO(CH2)nOH]+ Complexes (n = 2–8). A Case for O?H Bond Activation by Late Transition-Metal Ions. Preliminary Communication

In contrast to Fe⁺/diol complexes, gas-phase dehydrogenation of the corresponding Fe^II alkoxides, [FeO(CH₂)_nCH₂OH]⁺, is a highly specific process in the course of which oxidation of the terminal OH group takes place. Based on labeling studies, this is the exclusive mechanism for n = 2 and 3 (Scheme: path ); for higher homologues, as for example [FeOf(CH₂)₇CH₂OH]⁺, the labeling data demonstrate that an additional mechanism is operative, involving the dehydrogenation of internal positions of the alkyl chain (path ). The Fe⁺-mediated oxidation –CH₂OH → –CHO +H₂: constitutes one of the rare examples of O-H bond activation by late cationic transition-metal ions.