Modified flax fibers reinforced soy-based composites: mechanical properties and water absorption behavior

Flax fibers are often used in reinforced composites which have exhibited numerous advantages such as high mechanical properties, low density and biodegradablility. On the other hand, the hydrophilic nature of flax fiber is a major problem. In this study, we prepare the soybean oil based composites reinforced with protein coated and lipid acylated flax fibers and compare their water uptake properties. Results showed that water resistance properties of the composites are improved where treated flax fibers are used. The composite with lipid acylation of the flax fiber exhibited to enhance tensile strength and water resistance properties. Influences of fiber length, fiber loading and pressure on mechanical properties are also reported.     

Effect of mercerization of flax fibers on wheat flour/flax fiber biocomposite with respect to thermal and tensile properties

New composites materials, 100% ecofriendly based on modified wheat flour as matrix and flax fiber as fillers have been obtained by means of an extrusion process. The wheat flour matrix contains non-toxic plasticizers and is mixed well with natural fibers. One sample series without specific fiber surface treatment and a second series with a mercerization surface treatment have been prepared. The content of fillers varies from 0% w/w to 20% w/w. In this work the performances of these new composites in term of thermal stability, mechanical behaviours are compared and discussed in regard to the fiber treatment efficiency and composition. We observe an interesting behaviour: the efficiency is found the best for a fiber composition close to 10% w/w.     

Effect of fiber surface treatments on the fiber–matrix interaction in banana fiber reinforced polyester composites

Cellulosic fibers have been used as cost-cutting fillers in plastic industry. Among the various factors, the final performance of the composite materials depends to a large extent on the adhesion between the polymer matrix and the reinforcement and therefore on the quality of the interface. To achieve optimum performance of the end product, sufficient interaction between the matrix resin and the cellulosic material is desired. This is often achieved by surface modification of the resin or the filler. Banana fiber, the cellulosic fibers obtained from the pseudo-stem of banana plant (Musa sepientum) is a bast fiber with relatively good mechanical properties. The fiber surface was modified chemically to bring about improved interfacial interaction between the fiber and the polyester matrix. Various silanes and alkali were used to modify the fiber surface. Modified surfaces were characterized by SEM and FTIR. The polarity parameters of the chemically modified fibers were investigated using the solvatochromic technique. The results were further confirmed by electrokinetic measurements. Chemical modification was found to have a profound effect on the fiber–matrix interactions. The improved fiber–matrix interaction is evident from the enhanced tensile and flexural properties. The lower impact properties of the treated composites compared to the untreated composites further point to the improved fiber–matrix adhesion. In order to know more about the fiber–matrix adhesion, fractured surfaces of the failed composites where further investigated by SEM. Of the various chemical treatments, simple alkali treatment with NaOH of 1% concentration was found to be the most effective. The fiber–matrix interactions were found to be dependent on the polarity of the modified fiber surface.     

Processability of flax plant stalks into functional bast fibers

Flax (Linum usitatissimum L.) is an agricultural crop that is being considered as cost effective alternative to glass in composites. Flax is nature's composite with strong bast fibers held together in bundles and located in the outer regions of the plant stem between the outermost cuticle-epidermis layer and the innermost, woody tissues. Agricultural production of this crop is environmentally beneficial because it is produced through photosynthesis and considered a naturally renewable and sustainable material. Its use in bio-based composites could help lessen our dependence on fossil fuels today and into the future. Despite the longevity of flax in world markets, particular problems exist to provide flax fiber economically for markets in the US and North America. Barriers to such provisions include consistent, high-quality retting methods, efficient processing of whole stems into cottonized fibers, and development of standards to judge fiber quality. Processability of plant stalks into usable fiber requires retting which selectively removes pectinaceous and matrix substances thus separating cellulose fibers from non-fibrous substances and easing mechanical cleaning. Enzymes have been tested for efficiency of retting, and recommendations are in place for particular fiber properties. Before this work began, no processing facilities existed in North America for producing high value fibers. To facilitate research on bast fiber retting and subsequent processing, the Flax Fiber Pilot Plant (Flax-PP), was designed and modified after the 'Unified Line'; it is the only research facility of this type in the US and effectively processes and extracts bast fibers from plant stalks. A separate cottonizing unit has been installed to complete processing of fibers for various applications. Each processing step creates a fiber product and byproduct both with potential uses in composites. The development of standards through ASTM International is a continuing project. Currently, emphasis is on new equipment to quantify properties of particular usefulness such as cleanliness, fineness, and color. The Flax-PP becomes a valuable tool for improving fiber processing and quality, and thus integrates all activities for a flax fiber industry in North America.     

A study of advances in characterization of interfaces and fiber surfaces in lignocellulosic fiber-reinforced composites

This article deals with the aspects of interfacial and surface characterization of natural fibers and their composites. Vegetable fibers and their composites have attracted the attention of scientists worldwide because of their favorable properties. The different chemical modifications of natural fibers and characterization aspects have been discussed. The adhesion between fiber and matrix is a major factor in determining the response of the interface and its integrity under stress. Therefore characterization of the interface is of utmost importance. Both fiber surface and polymer matrix surface can be modified to obtain a strong interface. Various treatments being used for the lignocellulosic surfaces and the characterization techniques have been illustrated. The four main techniques of interfacial characterization that are enumerated in this article are the micromechanical techniques, spectroscopic, microscopic and swelling techniques. The micromechanical techniques like fiber pull-out and fragmentation have been dealt with giving emphasis to experimental aspects. Recent studies dealing with interfacial study of different lignocellulosic fiber reinforced composites have also been cited.     

Plasma-polymerized organosilicones as engineered interlayers in glass fiber/polyester composites

The plasma polymerization technique was used to surface modify glass fibers in order to form a strong but tough link between the glass fiber and the polyester matrix, and enable an efficient stress transfer from the polymer matrix to the fiber. Plasma polymer films of hexamethyldisiloxane, vinyltriethoxysilane, and tetravinylsilane in a mixture with oxygen gas were engineered as compatible interlayers for the glass fiber/polyester composite. The interlayers of controlled physico-chemical properties were tailored using the deposition conditions with regard to the elemental composition, chemical structure, and Young's modulus in order to improve adhesion bonding at the interlayer/glass and polyester/interlayer interfaces and tune the cross-linking of the plasma polymer. The optimized interlayer enabled a 6.5-fold increase of the short-beam strength compared to the untreated fibers. The short-beam strength of GF/polyester composite with the pp-TVS/O₂ interlayer was 32% higher than that with industrial sizing developed for fiber-reinforced composites with a polyester matrix.     

Short sisal fiber reinforced polypropylene composites: the role of interface modification on ultimate properties

Sisal fibers have been used for the reinforcement of polypropylene matrix. The compatibilization between the hydrophilic cellulose fiber and hydrophobic PP has been achieved through treatment of cellulose fibers with sodium hydroxide, isocyanates, maleic anhydride modified polypropylene (MAPP), benzyl chloride and by using permanganate. Various fiber treatments enhanced the tensile properties of the composites considerably, but to varying degrees. The SEM photomicrographs of fracture surfaces of the treated composites clearly indicated the extent of fiber–matrix interface adhesion, fiber pullout and fiber surface topography. Surface fibrillation is found to occur during alkali treatment which improves interfacial adhesion between the fiber and PP matrix. The grafting of the fibers by MAPP enhances the tensile strength of the resulting composite. It has been found that the urethane derivative of polypropylene glycol and cardanol treatments reduced the hydrophilic nature of sisal fiber and thereby enhanced the tensile properties of the sisal–PP composites, as evident from the SEM photomicrographs of the fracture surface. The IR spectrum of the urethane derivative of polypropylene glycol gave evidence for the existence of a urethane linkage. Benzoylation of the fiber improves the adhesion of the fiber to the PP matrix. The benzoylated fiber was analyzed by IR spectroscopy. Experimental results indicated a better compatibility between benzoylated fiber and PP. The observed enhancement in tensile properties of permanganate-treated composites at a low concentration is due to the permanganate-induced grafting of PP on to sisal fibers. Among the various treatments, MAPP treatment gave superior mechanical properties. Finally, experimental results of the mechanical properties of the composite have been compared with theoretical predictions.     

Optimum Plasma Surface Treatment of Luffa Fibers

Luffa fiber is a renewable resource material with low cost and that contributes to a healthier ecosystem by its biodegradability. Its natural structure can be considered as a naturally occurring composite consisting mainly of cellulose fibrils imbedded in a lignin matrix. Surface pretreatment is necessary to maximize their potential use. In this work, plasma treatment at atmospheric pressure was carried out on the raw luffa fibers. The orthogonal method was used to optimize the plasma treatment condition. The optimal conditions were obtained at a discharge time of 10 s, power of 110 W, and electrode distance of 6 mm for the system used. The surface characterization of untreated and pretreated luffa fibers was investigated by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric (TGA) analysis. The results showed that plasma treatment did not cause significant harm to the fiber integrity and the inner cellulose fibrils were exposed from the lignin matrix. Plasma-treated luffa fibers also showed a slightly better thermal stability than the untreated fibers. Compared with chemical pretreatment, plasma treatment had a significantly shorter duration, no consumption of solvent, and improved the cellulose contents.     

A Fluoropolymer Coating on Carbon Fibers Improves Their Adhesive Interaction with PTFE Matrix

Carbon fibers were treated in a HF glow discharge in tetrafluoroethylene and octafluorocyclobutane in order to improve their adhesion to poly(tetrafluoroethylene) matrix. As the result of the plasma treatment, a thin (20–140 nm) fluoropolymer coating was deposited onto the fiber surface. The structure of this coating was studied by means of IR spectroscopy, XPS, AFM and SEM techniques. The coating material appeared to be similar to PTFE in its chemical composition but distinguished by branched, partially crosslinked, amorphous structure and included unsaturated chemical bonds. The coating thickness of 70 nm was sufficient to effectively screen the field of molecular forces of the initial substrate, thus, decreasing the surface energy of the fibers and improving their compatibility with the PTFE matrix. The adhesive strength in the PTFE–carbon fiber systems, measured by means of the microbond test, more than doubled upon the plasma treatment (the local interfacial shear strength increased from 10.7 to 29.7 MPa, apparent IFSS from 4.3 to 7.8 MPa), and the interfacial frictional stress increased by 70%. The new composite material consisting of 20% short coated carbon fibers in the PTFE matrix showed better mechanical, thermal and tribological characteristics as compared with the composite reinforced with untreated fibers.     

Polylactic acid functionalization with maleic anhydride and its use as coupling agent in natural fiber biocomposites: a review

Abstract

Due to its renewability and biodegradability, biopolymers have developed interest in order to substitute oil-derived plastics. In particular, polylactic acid (PLA) is a promising biopolymer in terms of mechanical and biodegradable properties that is used for different applications. Nevertheless, PLA has some disadvantages like brittleness and processing instability. In order to overcome these drawbacks, it has been blended with natural fibers, leading to a fully biodegradable biocomposite material with enhanced properties. However, blending a hydrophobic biopolymer with hydrophilic fibers leads to poor interfacial adhesion producing interfacial voids, cavities and defects and consequently low performance properties. In this sense, this article reviews different strategies of biopolymer functionalization to improve compatibility in biocomposite materials. First, the effect of different parameters on biopolymers functionalization via melt and reactive extrusion processes is discussed. Finally, coupling efficiency of functionalized biopolymers is analyzed in terms of mechanical and thermal properties.     

A numeric model for the kinetics of water vapor sorption on cellulosic reinforcement fibers

Some natural fibers like flax, hemp and others show excellent mechanical properties that make them a promising choice for the reinforcement of polymers. The increasing research on natural fiber reinforced composites has still left important questions open, mainly concerning the fiber–matrix interface. Compared to the well optimized glass fibers, cellulose fibers show very different interaction with matrix polymers and adhesion promoters. The hydrophilic cellulose structure allows for the penetration of a considerable amount of water into the amorphous regions of the fibers, eventually exceeding 20% by mass, depending on fiber type, preparation and environmental humidity. Even embedded in totally apolar polymers the cellulose partly retains its ability for water sorption, which results in unfavorable effects, such as dimensional changes, decrease in strength, roughening of the surface, etc. The interaction of differently prepared fibers with water vapor and the effect of surface treatment is investigated by measuring the dynamics of water vapor sorption. An exponential model is used for the numerical evaluation of the sorption and desorption kinetics. The model not only allows for an excellent fit of the experimental isotherms, but without any further assumptions it immediately gives evidence of the existence of two distinct mechanisms for the exchange of water vapor, related to different sorption sites. These specific mechanisms are represented by individual sorption–desorption isotherms as components of the total isotherms. The model provides a clearer differentiation of the effects of fiber preparation and modification with respect to interfacial interactions.     

Evaluation of reinforcement on the mechanical behavior of partially bonded fiber/matrix interface

This paper aims at introducing a new natural composite used as soil stabilizer with particular application in geotechnical engineering. The fibers introduced in the present study could be used as effective soil reinforcement. This research proves the feasibility of the use of modified jute/polypropylene in lime and cement composites and studies their effects on the tensile and compressive strength of the matrix. In general, the optimal mechanical performance of natural composites and durability depends on the optimization of the interfacial bond between natural fiber and matrix. Since the fibers and matrices are chemically different, strong adhesion at their interfaces is needed for an effective transfer of stress and bond distribution throughout an interface. In this paper a theoretical approach for the identification of elastic modulus in composite interfaces is proposed in detail with a reasonable error. The theoretical approach is based on the method using a sum of least squares criterion. The approach is applied through optimization techniques, using analytical sensitivities and correlating adhesion with Young's modulus. The validity and potentiality of the proposed technique is discussed and the results demonstrated the versatility, accuracy, and efficiency of the presented approach. The applied method also appears to be a simple way of predicting the modulus of elasticity in composite interfaces. This leads to a discussion of the most promising stabilization methods for soil reinforcement and the outlook for the future.     

Effect of chemical modifications of the pineapple leaf fiber surfaces on the interfacial and mechanical properties of laminated biocomposites

Natural fiber reinforced renewable resource based laminated composites were prepared from biodegradable poly(lactic acid) (PLA) and untreated or surface-treated pineapple leaf fibers (PALF) by compression molding using the film stacking method. The objective of this study was to determine the effects of surface treatment of PALF on the performance of the fiber-reinforced composites. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) were used to aid in the analysis. The mechanical properties of the PLA laminated composites were improved significantly after chemical treatment. It was found that both silane- and alkali-treated fiber reinforced composites offered superior mechanical properties compared to untreated fiber reinforced composites. The effects of temperature on the viscoelastic properties of composites were studied by dynamic mechanical analysis (DMA). From the DMA results, incorporation of the PALF fibers resulted in a considerable increase of the storage modulus (stiffness) values. The heat defection temperature (HDT) of the PALF fiber reinforced PLA laminated composites was significantly higher than the HDT of the neat PLA resin. The differential scanning calorimeter (DSC) results suggest that surface treatment of PALF affects the crystallization properties of the PLA matrix. Additionally, scanning electron microscopy (SEM) was used to investigate the distribution of PLA within the fiber network. SEM photographs of fiber surface and fracture surfaces of composites clearly indicated the extent of fiber–matrix interface adhesion. It was found that the interfacial properties between the reinforcing PALF fibers and the surrounding matrix of the laminated composite are very important to the performance of the composite materials and PALF fibers are good candidates for the reinforcement fiber of high performance laminated biodegradable biocomposites.     

New nanoporous biocarbons with iron and silicon impurities: Synthesis,properties, and application to supercapacitors

The problem of coupling the porous structure of carbon materials with their electronic structure to achieve the maximum efficient operation of an electric double layer, i.e., the interfaces with the electrolyte, was considered. The initial materials for producing activated carbon were flax and field horsetail fibers. The effect of introducing iron-containing impurities into the initial raw flax material and natural silicon in the horsetail structure on the parameters of capacitive energy storage was studied. The investigation of the capacitance-voltage characteristics of the electric double layer, magnetic properties, and Raman spectroscopy data made it possible to propose a mechanism explaining the data obtained.     

Conduction noise absorption by fiber-reinforced epoxy composites with carbon nanotubes

Nearly all electronic equipment is susceptible to malfunction as a result of electromagnetic interference. In this study, glass fiber, and carbon fiber as a type reinforcement and epoxy as a matrix material were used to fabricate composite materials. In an attempt to increase the conduction noise absorption, carbon nanotubes were grown on the surface of glass fibers and carbon fibers. A microstrip line with characteristic impedance of 50 Ω in connection with network analyzer was used to measure the conduction noise absorption. In comparing a glass fiber/epoxy composite with a GF-CNT/Ep composite, it was demonstrated that the CNTs significantly influence the noise absorption property mainly due to increase in electric conductivity. In the carbon fiber composites, however, the effectiveness of CNTs on the degree of electric conductivity is negligible, resulting in a small change in reflection and transmission of an electromagnetic wave.     

Enhancing the Fibre Matrix Adhesion of Natural Fibre Reinforced Polypropylene by Electron Radiation Analyzed with the Single Fibre Fragmentation Test

The effects of electron radiation on natural fibre reinforced polypropylene have been analyzed with the single fibre fragmentation test. Specimens of single hemp, flax, ramie and cotton fibres/fibre bundles embedded in a polypropylene sheet were irradiated with electron radiation of 10 MeV with intensities of 5, 15 and 33 kGy. The radiation led to a strain reduction of the polypropylene but did also improve the adhesion between polymer and flax, hemp and cotton fibres/fibre bundles. The critical fragmentation length and the interfacial shear strength (IFSS) of the composite specimens have been determined showing a clear increase of the IFSS of up to 50% compared to specimens with applied coupling agents. Due to the high strain reduction of the PP at intensities of 15 and 33 kGy the different fibres could only be compared at 5 kGy. The ramie fibre specimens could be analyzed at 5 and 15 kGy intensity showing higher IFSS values at the higher intensity. A possible explanation for the improvement is the forming of radicals with the cellulose chains of the natural fibres and the polypropylene molecules leading to crosslinking and, therefore, better adhesion between the different components.     

Cellulose-based biocomposites: comparison of different multiphasic systems

Biocomposites (biodegradable composites) are obtained by blending biodegradable polymers and fillers. Since the main components are biodegradable, the composite as a whole is also expected to be biodegradable. This paper presents various biocomposites that have been elaborated with cellulose or lignocellulose fibers from diverse sources, with different lignin contents. This paper is targeted on the analysis of 'fiber–matrix' interactions of two types of biocomposites based on agropolymer (plasticized wheat starch) and biopolyester (polybutylene adipate-co-terephthalate), named APB and BPB, respectively. Processing and main properties of both biocomposites are shown and compared. Polyolefin-based composite (PPC), which is known to present very poor 'fiber–matrix' interactions, is used as a reference. Through the Young's modulus, mechanical properties have shown that the reinforcement, by increasing fiber content, is much more significant for APB compared to BPB. The evolution of chains mobility, evidenced through shift of T _g values, according to the increase in fiber content and thence in interfacial area, have shown that the fiber–matrix interactions are higher for APB. BPB presents intermediate values, higher than PPC ones. These results are in agreement with the analysis of the composite morphologies performed by SEM on cryogenic fractures. Finally, by determining the theoretical works of adhesion and the interfacial tensions from contact angle measurements, it is shown that these parameters are partially able to predict the level of interaction between the fibers and the matrix. We could show that the perspectives of such work seem to be of importance to tailor new materials with a controlled end-use.     

A review on abaca fiber reinforced composites

This paper reviews literatures and information on Abaca fibers (Musa textilis Nee) as reinforcing material for aerospace composite materials. Characterization of Abaca as well properties of Abaca reinforced composites and its applications were discussed. Therefore, challenges and future works for Abaca Reinforced composites were explored. Studies reveal that Abaca fiber pre-treatment helps in improving the mechanical properties of the composite. In addition, there have been efforts in combining Abaca fibers to existing mixture of synthetic composites to improve its mechanical properties and environmental performance. The future of Abaca is seen as one of the potent sources of reinforcing fiber for various material construction including aerospace materials.     

Viscoelasticity of a polymer matrix and fracture of heat-resistant fiber composites

This paper reports on the results of investigations into the general regularities of deformation and fracture of fiber composite materials based on new heat-resistant polymer binders. Fiber composites based on these binders can find wide application in various fields of engineering. It is established that an increase in the loss modulus of the polymer matrix decreases the probability of formation of a brittle crack in the matrix at the fiber break and increases the time interval between breakages of adjacent fibers. This leads to retardation of the correlated breakage of the fibers in fiber composite materials under loading, i.e., to an increase in their strength and fracture toughness. The inference is made that the matrix of high-strength heat-resistant fiber composites with a high fracture toughness should possess not only a high elasticity (this has long been known) but also good dissipative properties over the entire temperature range of operation.     

高浓度纤维增强材料介电特性计算方法

针对复合材料的微观结构非均匀和各向异性特点带来的数值方法计算慢、内存消耗大的问题,利用均匀化方法计算纤维增强复合材料的等效电磁参数.采用了纤维低体积添加比至高体积添加比的迭代方法,同时提出了一个描述材料微观结构的修正的特征长度,将现有的均匀化方法推广至非准静态(微波频段)条件下高纤维浓度情况.提出的修正的均匀化模型可直接用于反射系数、屏蔽效能等计算,其屏蔽效能与实际微观结构复合材料的数值仿真结果进行了对比,验证了提出的等效电磁参数计算公式的有效性和频率适用范围.