用于Raman光谱与微纳米结构同步检测的Raman-AFM系统研究

研究和发展了一种将微区拉曼(Raman)光谱检测与原子力显微镜(AFM)微纳米扫描成像相结合的新型Raman-AFM技术。设计了Raman光谱与AFM扫描成像的原位检测探头;研制出相应的Raman-AFM系统;利用该系统,对ZnO纳米颗粒和TiO2纳米薄膜开展了微区Raman光谱与微纳米结构的检测实验。研究表明,所获得的Raman光谱检测结果与理论值良好吻合,同时,AFM扫描检测得到的图像很好地表征了样品的微纳米结构,从而实现了微区Raman光谱与AFM图像的原位及同步检测,验证了这一技术的可行性,为Raman光谱技术与微纳米技术领域的实际应用提供了技术基础。     

On the quantification of ciprofloxacin in proprietary Ciproxin tablets and generic ciprofloxacin tablets using handheld Raman spectroscopy

Quantification of ciprofloxacin in proprietary Ciproxin tablets and generic ciprofloxacin tablets was made using handheld Raman spectroscopy. Powder dilutions of ciprofloxacin or crushed Ciproxin tablets with excipient(s) were made. The spectra were taken either from the powder dilutions or from pellets compressed from these dilutions and were stored in the instrument library. Methods were created from these powder dilutions: each representing a separate model. The spectra of the tablets were identified within each method using the inbuilt algorithm of the instrument. The results showed that only the models made with the crushed Ciproxin tablets were semi‐quantitative for the analysis of Ciproxin tablets. On the other hand, none of the models could identify generic ciprofloxacin tablets. Thus, the spectra were exported to MATLAB for off‐line quantification. Whereas, univariate regression models were hardly linear, partial least square regression models gave linear calibrations with correlation coefficients above 0.99 and root mean square error of calibration below 3.75% m/m. For the prediction of tablets, the models varied in their results with the one created with ciprofloxacin and lactose giving the most satisfactory results. However, in total the method did not give the pharmacopoeial accuracy of ±5% and stays a semi‐quantitative approach although a satisfactory identity of the constituents was achieved. Copyright © 2011 John Wiley & Sons, Ltd.     

Detailed analysis of the charge transfer complex N,N‐dimethylaniline–SO2 by Raman spectroscopy and density functional theory calculations

Although the amine sulfur dioxide chemistry was well characterized in the past both experimentally and theoretically, no systematic Raman spectroscopic study describes the interaction between N,N‐dimethylaniline (DMA) and sulfur dioxide (SO₂). The formation of a deep red oil by the reaction of SO₂ with DMA is an evidence of the charge transfer (CT) nature of the DMA–SO₂ interaction. The DMA–SO₂ normal Raman spectrum shows the appearance of two intense bands at 1110 and 1151 cm⁻¹, which are enhanced when resonance is approached. These bands are assigned to ν_s(SO₂) and ν(ϕ N) vibrational modes, respectively, confirming the interaction between SO₂ and the amine via the nitrogen atom. The dimethyl group steric effect favors the interaction of SO₂ with the ring π electrons, which gives rise to a π–π* low‐energy CT electronic transition, as confirmed by time‐dependent density functional theory (TDDFT) calculations. In addition, the calculated Raman DMA–SO₂ spectrum at the B3LYP/6‐311 + + g(3df,3pd) level shows good agreement with the experimental results (vibrational wavenumbers and relative intensities), allowing a complete assignment of the vibrational modes. A better understanding of the intermolecular interactions in this model system can be extremely useful in designing new materials to absorb, detect, or even quantify SO₂. Copyright © 2009 John Wiley & Sons, Ltd.     

In situ detection of cocaine hydrochloride in clothing impregnated with the drug using benchtop and portable Raman spectroscopy

This study describes the application of benchtop and portable Raman spectroscopy for the in situ detection of cocaine hydrochloride in clothing impregnated with the drug. Raman spectra were obtained from a set of undyed natural and synthetic fibres and dyed textiles impregnated with the drug. The spectra were collected using three Raman spectrometers: one benchtop dispersive spectrometer coupled to a fibre‐optic probe and two portable spectrometers. Despite the presence of some spectral bands arising from the natural and synthetic polymer and dyed textiles, the drug could be identified by its characteristic Raman bands. High‐quality spectra of the drug could be acquired in situ within seconds and without any sample preparation or alteration of the evidential material. A field‐portable Raman spectrometer is a reliable technique that can be used by emergency response teams to rapidly identify unknown samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Plasmonic effects and the morphology changes on the active material P3HT:PCBM used in polymer solar cells using Raman spectroscopy

There is no consensus yet that the enhancement effects of plasmonic device are predominantly caused by plasmonic effects or induced morphology changes in the optoelectronic `materials. Herein, we present a detailed Raman characterization of a typical organic P3HT:PCBM system comprising silver nanowires (Ag NWs) with different size, which can simultaneously study the plasmonic effects and the morphology changes. The direct comparison of the Raman spectra of non‐annealed and annealed samples indicates that the morphology of plasmonic samples has changed before annealing and the morphology of plasmonic samples and reference sample after annealing is not distinguishable. This indicates that the interaction between P3HT and Ag NWs with different size can be explained by plasmonic effects after annealing. Moreover, in‐situ Raman spectroscopy is used to study the morphology changes in plasmonic samples with different diameters of Ag NWs during heating process. This method can distinguish the plasmonic effects and morphology changes of plasmonic device. Copyright © 2016 John Wiley & Sons, Ltd.     

High pressure Raman spectroscopy of single-walled carbon nanotubes: Effect of chemical environment on individual nanotubes and the nanotube bundle

The pressure-induced tangential mode Raman peak shifts for single-walled carbon nanotubes (SWNTs) have been studied using a variety of different solvents as hydrostatic pressure-transmitting media. The variation in the nanotube response to hydrostatic pressure with different pressure transmitting media is evidence that the common solvents used are able to penetrate the interstitial spaces in the nanotube bundle. With hexane, we find the surprising result that the individual nanotubes appear unaffected by hydrostatic pressures (i.e. a flat Raman response) up to 0.7 GPa. Qualitatively similar results have been obtained with butanol. Following the approach of Amer et al. [J. Chem. Phys. 121 (2004) 2752], we speculate that this is due to the inability of SWNTs to adsorb some solvents onto their surface at lower pressures. We also find that the role of cohesive energy density in the solvent-nanotube interaction is more complex than previously thought.     

Effects of the structural order of canthaxanthin on the Raman scattering cross section in various solvents: A study by Raman spectroscopy and ab initio calculation

In this work,we measure the Raman scattering cross sections(RSCSs) of the carbon-carbon(CC) stretching vibrational modes of canthaxanthin in benzene,acetone,n-heptane,cyclohexane,and m-xylene.It is found that the absolute RSCS of CC stretching mode of canthaxanthin reaches a value of 10 24 cm 2 ·molecule 1 ·sr 1 at 8×10 5 M,which is 6 orders of magnitude larger than general RSCS(10 30 cm 2 ·molecule 1 ·sr 1),and the RSCSs of canthaxanthin in various solvents are very different due to the hydrogen bond.A theoretical interpretation of the magnetic experimental results is given,which is introduced in a qualitative nonlinear model of coherent weakly damped electron-lattice vibration in the structural order of polyene chains.In addition,the optimal structure and the bond length alternation(BLA) parameter of canthaxanthin are calculated using quantum chemistry calculation(at the b3lyp/6-31g(d,p) level of theory).The theoretical calculations are in good agreement with the experimental results.Furthermore,the combination of Raman spectroscopy and the quantum chemistry calculation study would be a quite suitable method of studying the structures and the properties of the π-conjugated systems.     

KTP晶体的激光烧蚀特性及Raman光谱研究

高阈值的KTP晶体的研发,对高能激光领域至关重要。采用高重复频率的紫外激光对KTP进行烧蚀,并对烧蚀前后的Raman光谱进行分析,研究发现：激光等离子体效应是造成晶体破坏的主要原因,其逆韧致吸收效应会大大增加激光脉冲能量的沉积,电离效应使得晶体发生充分的离解,高压冲击波效应则把熔化、气化以及电离混合物外排的同时,使得材料发生断裂。烧蚀前后的Raman光谱的特征峰分布基本相同,说明烧蚀作用没有改变KTP材料的整体结构。但是,特征峰的对比值(RIR)都发生了改变,且有所展宽,说明烧蚀后结晶度降低。其中TiO₆和PO₄等主要氧多面体的特征峰向低波数漂移,说明材料的键合力消弱,更易发生离解。     

Micro‐Raman spectroscopy and VP‐SEM/EDS applied to the identification of mineral particles and fibres in histological sections

Histological sections of a patient affected by an important respiratory disease were analysed firstly by optical microscope(OM)—crossed polarisers—to identify the presence of incorporated inorganic particles, with particular attention to the fibrous ones. Then, the particles/fibres that were found were studied both with micro‐Raman spectroscopy and variable‐pressure scanning electron microscopy with energy‐dispersive spectroscopy (VP‐SEM/EDS). The two techniques allowed the in situ characterisation of the inorganic phases without disintegration of the organic matter. Micro‐Raman spectroscopy was able to identify the vibrating chemical groups of the mineral phase associated with the inorganic grain while the crystalline structure was preserved by the biological system. The VP‐SEM/EDS characterisation, defining the elemental chemical composition of the analysed particle/fibre, allowed confirmation of the mineral phase deducible from spectroscopic data or its identification with certainty when the spectroscopic data were not exhaustive. Copyright © 2009 John Wiley & Sons, Ltd.     

Comparison of near infrared laser excitation wavelengths and its influence on the interrogation of seized drugs‐of‐abuse by Raman spectroscopy

The laser excitation wavelength is an important parameter in obtaining Raman spectra from drugs‐of‐abuse. This article compares the effect of near infrared wavelengths, 785 nm, using both benchtop and portable instrumentation and benchtop 1064 nm on the Raman spectra of seized drugs‐of‐abuse, including cocaine hydrochloride, cocaine freebase (crack), methylenedioxymethamphetamine (‘ecstasy’), amphetamine, diamorphine (heroin) and cannabis. The significant benefit of using 1064 nm for the interrogation of this type of sample is highlighted. Copyright © 2009 John Wiley & Sons, Ltd.     

Study of molybdenum coordination state and crystallization behavior in MoO3-La2O3-B2O3 glasses by Raman spectroscopy

The ternary MoO₃-La₂O₃-B₂O₃ glasses containing a large amount of MoO₃ (10-50 mol%) are prepared, and their structure and crystallization behavior are examined from the Raman scattering spectrum measurements and X-ray diffraction analyses. It is found that the glass transition and crystallization temperatures and the thermal stability against crystallization decrease with increasing MoO₃ content. It is suggested that the main coordination state of Mo⁶⁺ ions in the glasses is isolated (MoO₄)²⁻ tetrahedral units giving strong Raman bands at 830-860 and 930 cm⁻¹. It is found that the crystalline phases in the crystallized glasses are mainly LaMoBO₆ and LaB₃O₆, and the main crystallization mechanism in MoO₃-La₂O₃-B₂O₃ glasses is surface crystallization. LaMoBO₆ crystals are found to give strong Raman bands at 810-830 and ∼910 cm⁻¹.     

高温高压下水溶液中硫酸根离子浓度的拉曼光谱定量测定研究

当前,拉曼光谱通常被应用于定性研究,拉曼光谱的定量研究明显不足。通过理论分析,拉曼光谱的定量研究应当基于其相对强度来进行。据此,通过对三种不同浓度的Na2SO4溶液进行拉曼光谱分析,得到了常温常压下水溶液中SO2-4离子浓度的定量方程为:c(SO2-4)=4.779 6R(r2=0.999 4)。此外,对高温高压下硫酸根水溶液的拉曼光谱也进行了研究。光谱分析表明,温度和压力将影响拉曼谱峰强度比值与SO2-4浓度的关系。高温高压下水溶液中SO2-4浓度的定量方程为:c(SO2-4)=4.779 6(R+1.469×10-4ΔT+1.340×10-4ΔP),式中c(SO2-4)为待测溶液中SO2-4的浓度,R为拉曼谱峰强度的比值R(SO2-4/H2O),ΔT为相对于常温(23℃)时的温度差,ΔP为相对于常压(0.1MPa)时的压力差。该方程适用的温度范围为23℃≤T≤360℃,浓度范围为0.5~1.5mol·L-1,测量的相对误差为6.5%。对于具有拉曼活性的物质,拉曼光谱实验技术可以用来进行水溶液中物质浓度的定量研究。     

不同产地软玉的拉曼光谱分析及在古玉器无损研究中的应用

利用拉曼(Raman)光谱技术分别对中国新疆、青海、江苏、辽宁及韩国、俄罗斯、加拿大、新西兰和澳大利亚的软玉样品进行无损分析研究。首先利用拉曼光谱区分了透闪石型和阳起石型软玉, 并对软玉双链结构中Na+、K+对Ca2+以及Al3+对Si2+的不同置换程度引起低频区域特征峰的漂移进行分析, 同时还研究了表面状态和显微结构对674cm-1附近峰强的影响。最后利用拉曼(Raman)光谱技术结合质子激发X射线荧光(PIXE)和X射线衍射(XRD)对河南安阳殷墟遗址、河南省洛阳地区和浙江良渚遗址出土的9件中国古代玉器进行透闪石型软玉的矿相标定, 证明拉曼光谱在中国古玉器结构测试和材质鉴定中是一种很好的无损分析手段。     

The effects of contact area and applied load on the morphology of in vitro worn ultra‐high molecular weight knee prostheses: a micro‐Raman and gravimetric study

Ultra‐high molecular weight polyethylene knee prostheses of two different sizes (i.e. characterised by different contact areas) were run on a knee wear simulator in two tests differing for the applied load. Gravimetric and micro‐Raman spectroscopic analyses were performed to investigate at macroscopic and molecular levels the effects of contact area and applied load on the morphology of the knee components. The larger prostheses showed a higher mass loss in both tests, while Raman spectroscopy showed a more significant polymer degradation in the smaller prostheses, suggesting that a lower contact area is responsible for a higher wear at the molecular wear, but for a lower gravimetric wear. Raman measurements showed that in the second test (using a higher applied load), the wear mechanism changed with respect to the first test: the less severe conditions used in the latter resulted in an increase in the orthorhombic content, while the more severe conditions used in the former determined an increase and rearrangement of the amorphous phase. The results here reported allow to gain more insights into the effects of contact area, applied load and contact stress on wear. Preliminary micro‐Raman analyses on in vivo worn knee prostheses confirmed the results obtained in vitro: the retrievals of smaller size were found more degraded at molecular level than those of larger size. These findings showed that the conditions used in the in vitro tests well simulate the knee kinematics of the knee joint and thus the in vivo wear. Copyright © 2014 John Wiley & Sons, Ltd.     

液芯光纤中溶液吸收和荧光的性质对CS2受激拉曼散射阈值的影响

利用液芯光纤技术研究了不同浓度的β-Carotene的CS₂溶液的吸收与荧光的特性对CS₂的一、二阶Stokes谱线阈值的影响.实验发现随溶液浓度(10^-8—10^-6 mol/L)增加，CS₂的一阶Stokes谱线的激发阈值相对变高；并且与纯CS₂芯液的受激拉曼散射相比较，在低抽运能量激发下，就观察到CS₂的二阶Stokes谱线.这主要是由于在CS₂的受激拉曼谱线产生的过程中，β-Carotene的CS₂溶液的吸收和荧光共同影响了CS₂的一、二阶Stokes谱线的阈值.我们进行了理论上的拟合与分析，其结果与实验符合很好. 关键词： 2受激拉曼散射阈值')" href="#">CS₂受激拉曼散射阈值 液芯光纤 吸收与荧光     

蔬菜表面农药残留可见-近红外光谱探测与分类识别研究

利用在600～1 100nm波段范围内可见-近红外反射光谱分析技术,对常见的高残留农药在绿色植物活体上的无损检测进行了研究。首先将采集到的漫反射光谱数据进行小波变换提取光谱特征,然后再利用主成分分析方法进一步对光谱特征进行分析,最后把这些光谱的前两个主成分得分作为神经网络的输入信息,建立了多神经元的神经网络感知器。对农药残留检测的结果表明,该方法可有效甄别农药残留和种类,识别得到较好的分类效果。总之,该研究为蔬菜和瓜果表面的农药残留快速无损检测和识别提供了一条新途径。     

Spectroscopic studies of thermal treatment effect on the composition and size of CdS1−xSex nanocrystals in borosilicate glass

The effect of heat treatment parameters on the chemical composition and average size of CdS_1−xSe_x nanocrystals obtained in borosilicate glass by diffusion-limited growth is studied by optical absorption and Raman scattering spectroscopy. An increase of selenium content from 0.75 to 0.83 in the nanocrystals with the heat treatment temperature and duration is observed. Three lowest-energy optical transitions in CdS_1−xSe_x nanocrystals are assigned to corresponding electronic transitions based on the observed dependence of the confinement-related absorption maxima on the nanocrystal size.     

Analysis of the composition of the passive film on iron under pitting conditions in 0.05 M NaOH/NaCl using Raman microscopy in situ with anodic polarisation and MCR‐ALS

The composition of the surface film formed on pure iron was investigated in a solution of 0.05 M NaOH and 0.05 M NaCl. Raman spectra of the film were recorded in situ during anodic polarisation over the passive region after addition of the NaCl to the electrolyte, under conditions of preresonance enhancement using excitation at 636.4 nm. Multivariate curve resolution with alternating least squares analysis was applied to the spectra to measure the relative amounts of different iron oxide and oxyhydroxides in the film at different potentials. The water content was also determined in this way from Raman spectra recorded using excitation at 514.5 nm. It was found that the composition of the film and the amount of incorporated water were influenced by the applied anodic potential. The results show that stable pitting can occur when the composition changes from the primary constituents β‐FeOOH and Green Complex (a hydrated, amorphous magnetite) with smaller amounts of γ‐Fe₂O₃ and γ‐FeOOH, to δ‐FeOOH and Green Complex, simultaneously with a reduction in water content. These changes result in conditions that favour the rate of localised breakdown of the film by Cl⁻ ions over the rate of repassivation by water in the passive film. Copyright © 2011 John Wiley & Sons, Ltd.     

Improvement in the calculation of anti-Stokes energy transfer and experimental justification based on Er0.01YbxY1 - 0.01 - xVO4 crystal

The improvement on the calculation of anti-Stokes energy transfer rate is studied in the present work. The additional proportion coefficient between Stokes and anti-Stokes light intensities of quantum Raman scattering theory as compared with the classical Raman theory is introduced to successfully describe the anti-Stokes energy transfer. The theoretical formula for the improvement on the calculation of anti-Stokes energy transfer rate is derived for the first time in this study. The correctness of introducing coefficient exp{△E/kT } from well-known Raman scatter theory is demonstrated also. Moreover, the experimental lifetime measurement in Er0.01YbxY1-0.01-xVO4 crystal is performed to justify the validity of our important improvement in the original phonon-assisted energy transfer theory for the first time.