金纳米粒子修饰聚合物固相微萃取整体柱的制备及其性能研究

通过在毛细管聚合物整体柱表面修饰金纳米粒子,制备了一种可选择性捕获含巯基化合物的固相微萃取整体柱.首先制备聚(甲基丙烯酸缩水甘油酯-乙二醇二甲基丙烯酸酯)整体柱,在其表面化学修饰半胱胺;通过半胱胺上的巯基基团将金纳米粒子固定在整体柱的孔表面.以巯基类化合物为探针,评价了固相微萃取整体柱的萃取性能.结果表明,由于Au对巯...     

金纳米粒子修饰毛细管整体柱的制备及在多种色谱分离模式中的应用

整体柱是由单体、交联剂和致孔剂等通过自由基引发聚合反应,形成具有贯通孔及微孔结构的连续床固定相.整体柱具有良好的通透性和稳定性,并可于微管道内在线合成,特别适用于微型色谱柱或毛细管柱的制备.巯基化合物在金表面能进行自组装和交换的性质被广泛用于各种载体的修饰.其中,经烃基硫醇修饰的微米级的金颗粒已被用于色谱柱填料.本文将金纳米粒子表面积大、表面易修饰的特点与整体柱基质的优良性能相结合,发展了表面固定相基团可替换的毛细管色谱柱,用于多种色谱模式的蛋白或多肽混合物分离.     

以金纳米溶胶为中间体同时制备阳离子及反相模式整体柱

本文以甲基丙烯酸缩水甘油酯(GMA)为单体,二甲基丙烯酸乙二酯(EDMA)为交联剂,环己醇和十二醇为致孔剂,过氧化苯甲酰(BPO)为引发剂,制备了有机聚合整体材料基质,利用金纳米粒子(AuNPs)易与巯基基团(-SH)共价键合的特点和有机聚合整体柱的优点,以半胱胺和金纳米溶胶(AuNPs)为中间体,依次采用2-巯乙基磺酸钠和正十八烷硫醇修饰该柱,制备了表面具有阳离子交换和疏水作用两种模式的整体柱,拓宽了有机聚合物整体柱的应用领域。制备的整体柱适用于不同色谱模式下蛋白质或多肽混合物的分离。     

金纳米粒子修饰的氨基硅胶整体柱的制备及超灵敏表面增强拉曼散射检测

采用溶胶-凝胶法结合超分子模板技术, 以四乙氧基硅烷(TEOS)和3-氨丙基三乙氧基硅烷(APTES)作为反应前体, 以十六烷基三甲基溴化铵(CTMAB)为超分子模板, 简单快速地制备了一种新型氨基硅胶整体柱, 通过氨基将金纳米粒子组装在整体柱材料孔表面并用于表面增强拉曼散射(SERS)光谱分析. 以对巯基苯胺(PATP)和结晶紫(CV)为拉曼探针, 考察了金纳米粒子修饰的氨基硅胶整体柱用作SERS活性基底的性能. 结果表明, 该整体柱基底具有良好的SERS增强效应, 可检测到的PATP和CV的最低浓度分别为10^-9和10^-11 mol/L. 与金溶胶SERS基底相比, 本文制备的整体柱基底的检测灵敏度显著提高, 并具有良好的信号均一性, 是一种具有现场痕量检测应用潜力的SERS活性基底.     

蜂毒素在功能化金纳米粒子表面的吸附及构象变化

利用硼氢化钠还原法制备了金纳米粒子, 通过在其表面修饰链长不同的巯基羧酸, 得到了功能化纳米粒子. 利用荧光发射、紫外吸收和圆二色谱等手段研究了功能化金纳米粒子与蜂毒素分子之间的相互作用及其所诱导的蛋白质分子的构象变化. 研究结果表明, 功能化修饰的金纳米粒子可通过静电相互作用吸附蜂毒素(Melittin)并诱导其α-螺旋结构的形成, 且这种效应与巯基羧酸分子的链长直接相关.     

溶胶-凝胶技术制备毛细管硅胶整体柱及其应用

采用溶胶-凝胶技术合成硅胶整体柱，研究了不同反应物配比对制备毛细管硅胶整体柱的影响，合成了具有高机械强度和化学稳定性的毛细管硅胶整体柱。通过十八烷基修饰得到反相固定相。考察了电渗流行为和电色谱性能。3种芳香胺和4种苯同系物可达到基线分离，柱效高达159000N／m。     

Study on Electrochemical Behavior of Controllable Interface Alkanethiols Selfassembled Monolayers and Au Nanoparticles Modified Gold Electrode

在裸金电极上自组装不同比例的4,4’-二甲基联苯硫醇(MTP)和硫辛酸(TA)混合液,形成自组装膜( MTP+ TA/Au SAMs),再修饰纳米金,制得纳米金混合巯基修饰金电极(AuNPs/MTP+ TA/Au).研究了纳米金混合巯基修饰金电极的电化学行为和阻抗行为,结果表明电极表面pH值的改变对电极表面的电子转移有重要影响.对葡萄糖传感器的制备条件、测定条件、抗干扰能力等进行了讨论,结果表明修饰电极的微结构和微环境有必要进一步研究.     

基于表面增强拉曼光谱的重金属离子检测

以对巯基苯甲酸为拉曼标记和自组装修饰分子, 在光亮金基底上修饰后作为检测基底, 在金纳米粒子表面修饰后获得具有表面增强拉曼光谱信号的标记金溶胶. 修饰的基底及纳米离子通过重金属离子与羧基端的配位而发生相互作用, 最终形成“金属基底-对巯基苯甲酸/重金属离子/对巯基苯甲酸-金属纳米颗粒”的三明治结构. 采用扫描电镜表征纳米粒子的组装及以表面增强拉曼光谱检测表面标记分子的信号, 以此实现重金属离子的检测. 以强螯合剂EDTA溶液淋洗三明治结构, 使重金属离子与金属基底以及纳米颗粒上的羧基的配位作用断裂, 获得可再次利用的修饰金基底.     

基于DNA酶/AuNPs-GO传感器方波伏安法高灵敏检测Pb2+

制备了金纳米粒子-氧化石墨烯(AuNPs-GO)复合物,采用透射电镜(TEM)和紫外-可见吸收光谱(UV-Vis)对其进行了表征.将此复合物修饰到玻碳电极(GCE)表面,再通过Au—S键将巯基修饰的富含鸟嘌呤的DNA链(T30695)自组装到电极表面的金纳米粒子上.T30695可与Pb2+结合形成稳定的平行G-四链体,...     

Au纳米粒子在有机溶剂中的电导行为

采用化学方法制备出粒径约10nm的Au纳米粒子,分别用十二、十四和十六烷基硫醇对Au粒子表面进行修饰,再溶入不同有机溶剂中,制备得到Au纳米粒子/氯仿和Au纳米粒子/甲苯溶液.测试了不同溶液的电导率随溶质浓度的变化规律,发现在整个浓度范围内存在一个临界浓度值.当溶质浓度低于临界浓度值时,溶液的电导率随溶质浓度的增加而迅速增加;而当溶质浓度超过临界浓度值时,溶液电导率的增加缓慢.在本文测试的浓度范围内,当Au纳米粒子分别被十二、十四和十六烷基硫醇修饰时,Au纳米粒子/氯仿溶液的临界浓度值分别约为11.22,7.96和5.47g/L.在相同浓度下,Au纳米粒子外面包裹的烷基硫醇的链长越短,其溶液的电导率越大.在整个浓度范围内,Au纳米粒子/氯仿溶液的电导率均高于Au纳米粒子/甲苯溶液的电导率.     

Separation of gold nanoparticles with a monolithic silica capillary column in liquid chromatography

A separation system for gold nanoparticles was developed using monolithic silica capillary columns with 50 μm i.d., which were prepared via in-situ sol-gel processes. Gold nanoparticles with five different average sizes were synthesized via reduction of tetrachloroauric acid (HAuCl(4)) under different synthesis conditions, and were evaluated by UV-visible spectrophotometry, dynamic light scattering as well as transmission electron microscopy before they were separated using the developed system. The results showed that all of the gold nanoparticles had a certain size distribution, and the mean sizes obtained were 13, 17, 33, 43 and 61 nm, with σ = 2.5, 2.7, 5.2, 5.1 and 5.6 nm, respectively. Transmission electron microscopy showed that the samples with mean sizes of 13 and 17 nm were almost spherical, while larger samples were slightly non-uniform. The agglomeration of gold nanoparticles as the sample could be prevented by using a sodium dodecyl sulfate aqueous solution as the mobile phase, and gold nanoparticles were retained by adsorption on the silica surface. Separation with 8 mM sodium dodecyl sulfate as the eluent and a 1000-mm column was successful, and the separation of gold nanoparticles with 61 and 17 nm or 61 and 13 nm was demonstrated. The separation results obtained using a nonporous silica packed column as well as monolithic silica columns with or without mesopore growth were compared. It was found that separation using the mesopore-less monolithic column achieved better resolution. Through the use of a 2000-mm separation column, the mixtures of 61, 43, 17 nm and 61, 33, 13 nm could be separated.     

Au/CeO2/SiO2催化CO低温氧化反应过程中CeO2的作用（英文）

采用具有分等级孔道结构的SiO2(HMS)为载体,通过润湿浸渍引入少量CeO2,经焙烧得到CeO2/HMS复合载体,然后采用沉积沉淀法负载上Au纳米粒子,得到Au/CeO2/HMS三元复合催化剂.通过X射线衍射、程序升温还原和原位红外光谱等手段表征了催化剂的结构.结果表明,CeO2的存在可控制Au颗粒的沉积并稳定载体上的纳米Au颗粒.Au/CeO2/HMS上CO低温氧化反应完全转化温度为60oC.高度分散的Au0可以活化CO,CeO2颗粒则可以提供反应需要的氧.稳定性测试结果显示,反应48h催化剂活性维持不变.     

Wetting properties of passivated metal nanocrystals at liquid-vapor interfaces: a computer simulation study

Molecular dynamics simulations have been employed to determine the contact angles of alkylthiol passivated gold nanocrystals adsorbed at the air-water interface. Simulations were performed using butane-, dodecane-, and octadecanethiol passivated nanoparticles. We demonstrate how the length of the surfactant chain can profoundly influence the wetting behavior of these nanoparticles. All particles were found to be stable at the air-water interface, possessing large, well-defined contact angles. We find that the shape of the dodecane- and octadecanethiol particles is strongly perturbed by the interface. We also present an analysis of the orientational ordering of water molecules at the dodecane-water interface and around butane- and dodecanethiol passivated nanoparticles. The orientational ordering translates into an electrostatic field around the nanoparticles, the magnitude of which corresponds with that of the water liquid-vapor interface.     

单分散、规则球形Au@SiO2核-壳纳米粒的制备及光谱研究

采用3-巯基丙基三甲氧基硅烷作为联结剂,成功将单个金纳米粒子包在氧化硅壳中,制得Au@SiO₂核壳纳米粒子;该复合纳米粒子形貌呈球形、单分散性较好,金纳米粒子位于氧化硅球的中心,无团聚的金纳米粒子包覆在氧化硅壳中。采用透射电镜(TEM)对样品的形貌进行了表征,通过能量散射X-射线能谱(EDX)分析了目标物的化学成分,并对所得核壳纳米粒子的光谱性质进行了研究。     

Silica spheres coated with C18‐modified gold nanoparticles for capillary LC and pressurized CEC separations

Nonporous monodispersed silica spheres of 1.3 μm were coated with gold nanoparticles (AuNPs) and subsequently coated with n‐octadecanethiol. By transmission electron microscopy analysis, the average diameter of the AuNPs on the silica spheres was determined to be 12 nm. The chromatographic and electrochromatographic properties of self‐assembled n‐octadecanethiol AuNP‐coated silica microspheres (C18‐AuNPs‐SiO₂) were investigated using a group of nonpolar PAHs. The stationary phase appears to display a characteristic reversed‐phase behavior. Higher separation efficiency and shorter separation times were obtained using pressurized CEC (pCEC) compared with capillary LC (CLC). A maximum column efficiency of about 2.5×10⁵ plates per meter and less than 18 min separation time for benzene were obtained in pCEC while only 66 507 plates per meter and an analysis time of nearly 100 min were observed in CLC mode. A chemical stability test of the C18‐AuNPs‐SiO₂ stationary phase under extremely high and low pH conditions demonstrated that it is stable at pH 12 and 1 for at least 60 h. The results confirm that C18‐AuNPs‐SiO₂ possesses a high rigidity to withstand high packing pressures and can be used as a good stationary phase for CLC and pCEC.     

Rapid one-step synthesis, characterization and functionalization of silica coated gold nanoparticles

This paper describes a rapid, simple and one-step method for preparing silica coated gold (Au@SiO₂) nanoparticles with fine tunable silica shell thickness and surface functionalization of the prepared particles with different groups. Monodispersed Au nanoparticles with a mean particle size of 16 nm were prepared by citrate reduction method. Silica coating was carried out by mixing the as prepared Au solution, tetraethoxysilane (TEOS) and ammonia followed by microwave (MW) irradiation. Although there are several ways of coating Au nanoparticles with silica in the literature, each of these needs pre-coating step as well as long reaction duration. The present method is especially useful for giving the opportunity to cover the colloidal Au particles with uniform silica shell within very short time and forgoes the use of a silane coupling agent or pre-coating step before silica coating. Au@SiO₂ nanoparticles with wide range of silica shell thickness (5-105 nm) were prepared within 5 min of MW irradiation by changing the concentration of TEOS only. The size uniformity and monodispersity were found to be better compared to the particles prepared by conventional methods, which were confirmed by dynamic light scattering and transmission electron microscopic techniques. The prepared Au@SiO₂ nanoparticles were further functionalized with amino, carboxylate, alkyl groups to facilitate the rapid translation of the nanoparticles to a wide range of end applications. The functional groups were identified by XPS, and zeta potential measurements.     

Thermoplastic polyurethane/silica nanocomposite fibers by electrospinning

Thermoplastic polyurethane/silica nanocomposite fibers with good mechanical properties were prepared by electrospinning, using colloidal silica as the source of silica and dimethyl formamide as the solvent. The fiber morphology was examined by field emission scanning electron microscopy. The average fiber diameter is about 0.8 μm with 0–10 wt % silica, and silica nanoparticles were observed on all fiber surfaces. X‐ray photoelectron spectroscopy analysis of Si in combination with transmission electron microscopy observation suggest that silica nanoparticles have a fairly uniform distribution in the fibers rather than enriching on the fiber surfaces. Tensile tests show that the incorporation of silica nanoparticles can bring about a significant reinforcing effect without decreasing the ductility. The reinforcing effect is further confirmed by dynamic mechanical analysis. The thermoplastic polyurethane/silica composite fiber mats can adsorb gold nanoparticles after further treatment with 3‐aminopropyltriethoxysilane, demonstrating that the composite fibers could be used as functional fibers by using the properties of silica nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Tailored core-shell-shell nanostructures: sandwiching gold nanoparticles between silica cores and tunable silica shells

Size tunable and structure tailored core-shell-shell nanospheres containing silica cores, gold nanoparticle shells, and controlled thicknesses of smooth, corrugated, or porous silica shells over the gold nanoparticles have been synthesized. The synthesis involved the deposition of gold nanoparticles on silica cores, followed by sol-gel processing of tetraethoxysilane (TEOS) or sodium silicate to form dense or porous silica shells, respectively, over the gold nanoparticles. The structures and sizes of the resulting core-shell-shell nanospheres were found to heavily depend on the sizes of the core nanoparticles, the relative population of the gold nanoparticles on each core, and the concentration of TEOS. While a higher TEOS concentration resulted in thicker and more uniform silica shells around individual larger silica cores (approximately > or =250 nm in diameter), the same TEOS concentration resulted in aggregated and twin core-shell-shell nanostructures for smaller silica cores (approximately < or =110 nm in diameter). The thinner silica shells were synthesized by using a lower TEOS concentration. By using sodium silicate (Ung et al. J. Phys. Chem. B 1999, 103, 6770), the porous silica shells were synthesized. Controlled chemical etching of the core-shell-shell nanoparticles with an aqueous KCN solution resulted in corrugated silica shells around the gold nanoparticles or corrugated silica nanospheres with few or no gold nanoparticles. This has allowed synthesis of new types of core-shell-shell nanoparticles with tailored corrugated shells. The nanoporous silica shells provided accessible structures to the embedded metal nanoparticles as observed from the electrochemical response of the gold nanoparticles.     

Green preparation of hollow mesoporous silica nanosphere inside-loaded gold nanoparticles and the catalytic activity

In this work, an active nano-catalyst with gold nanoparticles loaded in hollow mesoporous silica nanospheres (HMSNs/Au) was prepared by a one-pot sol-gel method, in which gold ions were loaded in hollow mesoporous silica spheres followed by sodium alginate reduction. The characterization of the HMSNs/Au were determined by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), N₂ adsorption–desorption isotherms (BET). The high catalytic activity of HMSNs/Au, denoted as apparent turn-over frequency (TOF), was detected by UV-Vis spectrophotometer for the catalytic reduction of 4-nitrophenol (74.5 h^?1) and 2-nitrophenol (108.7 h^?1) in the presence of sodium borohydride solution due to the small gold nanoparticles size and overall exposure of active sites. It is expected that this ecofriendly approach to prepare inorganic composited nanoparticles as high active catalysts based on hollow mesoporous materials was a promising platform for loading noble metal nanoparticles.