树枝状大分子聚酰胺-胺用于氨基酰化酶的固定化研究

以树枝状大分子修饰的硅胶为载体,戊二醛为交联剂,对氨基酰化酶进行固定化研究。考察了树枝状大分子的代数、戊二醛浓度、反应温度与时间对氨基酰化酶固定化效果的影响,并且考察了该固定化酶的最佳酶解条件。结果表明,随着树枝状大分子代数的增加,固定化的酶量随之增大,同时,固定后的酶仍然保持较高的活性。     

多层开管毛细管酶反应器的制备及在蛋白质酶切中的应用

以石英毛细管作为酶固定化的载体, 在毛细管内壁上逐步合成树枝形大分子聚酰胺-胺(PAMAM), 再通过交联剂戊二醛将胰蛋白酶直接键合到该大分子的末端氨基上, 并对酶固定化条件进行了优化, 制备了多层酶反应器. 利用该酶反应器对马心细胞色素C等蛋白质进行了酶切, 并对酶切的条件进行了优化. 实验结果表明, 该固定化酶反应器具有较高的酶切效率、良好的重现性和稳定性, 可用于蛋白质组学的研究.     

壳聚糖固定化胰蛋白酶的研究

以壳聚糖为载体，戊二醛为交联剂，采用两种方法制备了固定化胰蛋白酶。考察了固定化反应中pH值，戊二醛的浓度，以及给酶量对固定化胰蛋白酶活力的影响，并研究了这两种固定化胰蛋白酶的性质。实验结果表明，以戊二醛预交联的网状壳聚糖为载体制备的固定化胰蛋白酶具有更加优良的性能，在最佳固定化反应条件下，酶的活性加收率可达56％。此固定化胰蛋白酶的最适pH为7．0－8．5，最适温度为60℃，Km值为2．52mol/L，固定化胰蛋白酶表现出较好的热稳定性，pH贮存稳定性，以及在乙醇水溶液中的稳定性。     

微波辅助合成聚酰胺-胺修饰硅胶及其对牛血清白蛋白的吸附性能研究

采用微波辅助合成法制备了聚酰胺-胺树枝状大分子修饰硅胶,并考察了其对牛血清白蛋白(BSA)的吸附性能。PAMAM修饰硅胶的合成条件通过元素分析进行考察,不同代数PAMAM修饰硅胶通过傅里叶变换红外光谱法表征。结果表明,在微波辅助下制备的PAMAM修饰硅胶的红外光谱图中出现酰胺的特征吸收峰与采用传统加热方法的文献报道一致,而采用微波辅助和传统加热方法的反应时间分别为40min和24h,由此说明微波辅助合成聚酰胺-胺树枝状大分子修饰硅胶是可行的。同时研究还发现聚酰胺-胺修饰硅胶对蛋白的吸附能力比未经修饰的硅胶强,而且蛋白的吸附量随着聚酰胺-胺代数的增加而增加。     

树状大分子接枝型聚合物色谱分离材料研究进展

随着色谱固定相制备技术和材料科学领域的不断发展,目前已经有大量修饰方法和新型材料被用于固相萃取、高效液相色谱以及离子色谱聚合物固定相填料的功能化修饰。其中聚酰胺-胺(PAMAM)树状大分子由于其独特的结构和性质,在色谱分离材料结构完善和性能提升中也发挥了重要的作用。该文主要综述了PAMAM树状大分子在以聚合物为基质的色谱分离材料修饰中的应用,并对其今后的发展进行了展望。     

新型亲水聚合物修饰硅胶颗粒固定化酶的制备及在蛋白质组鉴定中的应用

采用原子转移自由基聚合法制备了亲水聚合物修饰的硅胶颗粒作为一种新型固定化酶载体,在实现胰蛋白酶高密度固定的同时,显著降低了载体材料非特异性吸附导致的样品损失。因此,该固定化酶材料兼具高酶解效率和高回收率的特性。以标准蛋白质牛血清白蛋白(BSA)为样本,使用该固定化酶1 min即可完成酶解,鉴定到肽段对BSA的氨基酸序列覆盖率可达90%以上。该固定化酶材料成功应用于酵母菌全蛋白质复杂样本的酶解,从3 min酶解产物中鉴定到666个蛋白质,超过同样条件下溶液酶解12 h的鉴定结果。     

生物材料聚酰胺-胺树状大分子在医学领域研究进展

聚酰胺－胺（PAMAM）树状大分子是一类新型纳米生物材料，这类分子可通过有机合成的方法精确控制分子的结构和相对分子质量，其独特的分子结构使之在许多领域获得广泛应用，本文着重介绍了PAMAM树状大分子作为基因载体，药物载体，磁共振造影剂和硼中子俘获治疗试剂等在医学领域中的研究进展。     

聚酰胺-胺(PAMAM)树状大分子对甲氨蝶呤的包合及缓释研究

以甲氨蝶呤(MTX)为模型药物,研究了G5.0PAMAM树状大分子对其包合和释放,并用13^CNMR对PAMAM-MTX包合物进行了表征.UV-Vis研究结果表明,1个G5.0PAMAM树状大分子能包合27个MTX分子,体外释放研究表明,在37℃,pH=7.4的10mmol/LTris-HCl缓冲溶液中G5.0PAMAM树状大分子对MTX具有明显的缓释作用.     

(聚酰胺-胺)树状大分子对甲氨蝶呤的复合和释放研究

以甲氨蝶呤(MTX)为模型药物,研究了PAMAM与MTX的复合及体外释放.1H-,13C-NMR数据表明MTX与PAMAM树状大分子形成复合物是由于MTX羧基和PAMAM树状大分子外端氨基之间的相互作用.该复合物在pH=7.4,10 mmol/L Tris-HCl中非常稳定,表现出明显的缓释效果.当溶液中的离子强度增加时,会破坏PAMAM-MTX复合物的稳定性,缓释作用部分或全部失去,说明PAMAM树状大分子与MTX之间的相互作用属于静电作用.UV测得每个G5.0 PAMAM、G4.0 PAMAM树状大分子分别能复合271、4个MTX分子.     

聚酰胺-胺树状大分子的应用

聚酰胺-胺(PAMAM)树状大分子是目前树状大分子化学中研究较为成熟的一类，是三种已经商品化的树状大分子之一，其功能化和应用是目前树状大分子领域的热点。PAMAM已在多个领域显示出良好的应用前景。本文主要对PAMAM在表面活性剂、催化剂、纳米复合材料、金属纳米材料、膜材料、导电材料等方面的应用进行评述。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.