铅离子印迹聚合物的制备、表征及其在水溶液中的吸附行为研究

以Pb2+为模板,壳聚糖为单体,硅胶为载体,γ-(2,3环氧丙氧)丙基三甲氧基硅烷(KH-560)为偶联剂,利用表面分子印迹技术和溶胶-凝胶法制备了Pb2+ 印迹聚合物.采用傅立叶变换红外光谱法(FT-IR)、紫外光谱法、扫描电镜对Pb2+ 印迹和非印迹聚合物的表面形貌和结构进行表征;并用电感耦合等离子体原子发射光谱法考察了吸附酸度、吸附剂用量、静置时间等对聚合物吸附性能的影响;研究了印迹聚合物在混合溶液中对Pb2+ 的选择性,比较了印迹和非印迹聚合物的吸附容量;并提出了印迹聚合物的印迹吸附机理.在最佳吸附酸度pH=4.5时,0.3 g 吸附剂吸附5 h达到平衡,Pb2+印迹聚合物对模板离子具有较高的选择性,其饱和吸附容量是非印迹聚合物的2倍.     

多壁碳纳米管表面邻苯二甲酸二(2-乙基)己酯印迹聚合物的制备及其在固相萃取中的应用

以苯基修饰的多壁碳纳米管为载体,邻苯二甲酸二(2-乙基)己酯为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在碳纳米管表面接枝一层塑化剂邻苯二甲酸二(2-乙基)己酯印迹聚合层.采用红外光谱和扫描电镜对聚合物进行表征和分析.结果表明,在碳纳米管表面成功接枝一层20～30 nm厚的印迹聚合层.采用高效液相色谱研究该印迹聚合物的吸附性能,结果表明,碳纳米管分子印迹聚合物对邻苯二甲酸二(2-乙基)己酯最大吸附量为69.1 μmol/g,达到吸附平衡时间约为60 min.选择性吸附实验表明,与其它结构类似物相比,该印迹复合材料对邻苯二甲酸二(2-乙基)己酯有良好的识别能力.作为固相萃取材料装填于固相萃取柱中,该印迹聚合物能对芒果汁样品中塑化剂进行有效的分离和富集.     

磁性碳纳米管表面铅离子印迹聚合物的制备及应用

以乙烯基修饰的磁性碳纳米管为基质,Pb2+为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,制备出一种对Pb2+具有特异吸附能力的新型磁性印迹聚合物(MWNTs/MIIPs)。采用扫描电镜、红外光谱和振动样品磁强计等技术并对该印迹聚合物的形态、化学结构和性能进行表征。吸附实验结果表明,所制备的MWNTs/MIIPs对Pb2+具有良好的吸附和选择识别能力,最大吸附量为25.9 mg/g;选择吸附实验结果表明,Pb2+/Cu2+,Pb2+/Zn2+,Pb2+/Co2+,Pb2+/Mg2+,Pb2+/Cd2+以及Pb2+/Ni2+的选择因子分别是2.3,2.5,2.1,2.2,2.1和2.4。结合原子吸收光谱分析技术,此MWNTs/MIIPs成功应用于实际样品中微量Pb2+的分离富集,富集倍数可达40.5倍。     

磁性Fe3O4@SiO2@CS镉离子印迹聚合物的制备及吸附性能

以SiO2包覆的纳米Fe3O4为载体, 壳聚糖(Chitosan, CS)为功能配体, γ-缩水甘油醚氧丙基三甲氧基硅烷为交联剂, 制备了磁性Fe3O4@SiO2@CS镉离子印迹聚合物(Magnetic ion-imprinted polymer, M-IIP). 采用扫描电镜和红外光谱对该磁性印迹聚合物进行了表征. 结果表明, 壳聚糖在环氧基硅烷交联作用下, 实现了印迹壳层在磁性Fe3O4表面的接枝, 该印迹材料是边长为60~120 nm的立方体. 吸附性能实验表明, M-IIP对Cd(Ⅱ)的吸附符合一级动力学吸附模型; M-IIP对Cd(Ⅱ)/Cu(Ⅱ), Cd(Ⅱ)/Zn(Ⅱ), Cd(Ⅱ)/Pb(Ⅱ)和Cd(Ⅱ)/Hg(Ⅱ)的相对选择系数分别为2.92, 3.43, 8.97和9.20. 原子吸收光谱检测结果表明, 该磁性Fe3O4@SiO2@CS离子印迹聚合物可用于水溶液中Cd(Ⅱ)的分离, Cd(Ⅱ)回收率在98%以上.     

铅(Ⅱ)印迹聚合物制备及其对铅(Ⅱ)的选择性吸附研究

以Pb2+为模板离子,顺丁烯二酸(MA)为功能单体,苯乙烯(St)为骨架单体,过硫酸钾(KPS)为引发剂,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂制备了Pb2+印迹聚合物(IIP);用UV,FTIR,SEM对聚合物进行了表征,用火焰原子吸收光谱分析了IIP对Pb2+的选择性吸附;结果表明,聚合过程中发生了印迹作用,在室温下,溶液pH为5.4,吸附时间为60 min时,IIP对Pb2+的饱和吸附量可达到50.5 mg/g,吸附率达到90%;与相应非印迹聚合物(NIP)相比,IIP对Pb2+的吸附量增大并具有选择性,Pb2+与电荷相同及离子半径相近的Cd2+,Mn2+,Ni2+共存时,相对选择性系数分别为4.53,15.7,6.16;以HNO3(1+32)溶液作为解吸剂进行洗脱,解吸率可达99%;聚合物可作为吸附剂应用于环境水样中痕量Pb2+的分离富集。     

核壳式氯霉素分子印迹聚合物碳纳米管复合材料的制备及应用

本文以多壁碳纳米管(MWCNTs)为载体,采用溶胶-凝胶法先在MWCNTs表面包覆硅层,得到MWCNTs@SiO2,再以氯霉素(Chloramphenicol,CAP)为模板,无水乙醇为溶剂,氨丙基三乙氧基硅烷(APTES)和苯基三甲氧基硅烷(PTMOS)为双功能单体,四乙氧基硅烷(TEOS)为交联剂,采用表面分子印迹技术合成具有核壳结构的CAP分子印迹聚合物包覆的碳纳米管复合材料。采用透射电镜(TEM)、红外(IR)光谱和热重(TG)分析技术对CAP分子印迹聚合物复合材料的结构、形貌进行了表征,并对其吸附性能进行了详细研究。结果表明,制备的分子印迹聚合物吸附动力学快,吸附容量大,选择性好,印迹因子达到4.2,并且可循环使用。将制备的分子印迹聚合物材料应用于实际样品鸡蛋中CAP含量的测定,回收率可达72.3%~84.1%。     

铅(Ⅱ)离子印迹复合膜的制备及其性能研究

以聚丙烯微孔膜(MPPM)为支撑,采用共价表面修饰和离子印迹技术,制备了Pb(Ⅱ)离子印迹复合膜.首先通过紫外光引发丙烯酸接枝聚合,在MPPM表面引入羧基;然后基于羧基和氨基的反应,将壳聚糖共价接枝到MPPM表面;再以Pb(Ⅱ)为模板离子、环氧氯丙烷为交联剂,通过配位键作用形成离子印迹位点.制备过程通过ATR-FTIR和XPS分析得到了证实.利用扫描电子显微镜(SEM)-能量色散X射线光谱仪(EDX)对膜表面及截面的形貌及元素分布进行了分析.静态水接触角和纯水通量实验结果显示,印迹复合膜具有良好的表面亲水性和渗透性,在离子印迹聚合物接枝率为174.4μg/cm2时,水通量高达2659±58 L/(m2.h).印迹复合膜对Pb(Ⅱ)离子的吸附亲和性和渗透选择性分别通过平衡结合实验和竞争渗透实验进行评价.与非印迹复合膜相比,印迹复合膜对Pb(Ⅱ)离子展现出更强的吸附亲和性,更快的吸附速率及更好的渗透选择性,以Cu(Ⅱ)和Zn(Ⅱ)作为竞争离子,其渗透选择性因子分别为3.43和3.93.     

基于SPR技术研究壳聚糖对Pb2+的吸附动力学

采用自主构建的表面等离子共振(SPR)生物传感系统研究了壳聚糖对Pb2+的吸附动力学。通过双官能团偶联剂将壳聚糖固定在传感器芯片表面,利用壳聚糖分子中含有的大量活性基团与Pb2+配位形成金属螯合物,研究了壳聚糖对不同浓度Pb2+的吸附过程,并进行动力学分析。结果表明,壳聚糖对铅离子的吸附符合Langmuir单分子吸附理论所提出的动力学方程,为壳聚糖在处理含铅环境污染物方面提供了一种理论依据。     

碳纳米管芹菜素印迹聚合物的制备及应用

本文以羧基化多壁碳纳米管为基材,结合芹菜素、丙烯酰胺、丙酮和乙二醇二甲基丙烯酸酯,在多壁碳纳米管表面合成对芹菜素具有特异性识别的分子印迹聚合物(MWCNTs-MIPs),并利用扫描电镜(SEM)、傅里叶变换红外(FT-IR)光谱和比表面积分析(BET)对该印迹聚合物进行表征。结果表明,在碳纳米管表面能均匀稳定地接枝一层厚度约为10~20nm的印迹材料。对聚合物的静态吸附性能和选择性进行研究,表明MWCNTs-MIPs的吸附效果优于其非印迹材料(MWCNTs-NIPs)。固相萃取实验表明该方法不仅重现性好,并能使芹菜素的纯度由0.53%增高至90.93%,回收率可达95.84%,富集因子高达171.6。可作为复杂天然产物中芹菜素分离提取材料。     

磁性氧化石墨烯/MIL-101(Cr)表面金属离子印迹聚合物制备及其对Cu(Ⅱ)和Pb(Ⅱ)选择性吸附

本文以磁性氧化石墨烯/MIL-101(Cr)复合材料为载体,以Cu(Ⅱ)和Pb(Ⅱ)模板,多巴胺(DA)为功能单体,采用表面印迹技术成功制备一种对Cu(Ⅱ)和Pb(Ⅱ)具有高选择吸附性能的磁性离子印迹聚合物。 采用傅里叶变换红外光谱、扫描电子显微镜和振动样品磁强计等技术对该磁性离子印迹聚合物的形貌、粒径大小和磁性能进行表征。 详细探讨了该磁性离子印迹聚合物对Cu(Ⅱ)和Pb(Ⅱ)的吸附动力学、等温吸附性能及吸附选择性,结果表明该磁性离子印迹聚合物对Cu(Ⅱ)和Pb(Ⅱ)最大吸附量分别为144.92和322.58 mg/g。 优化了磁固相萃取条件,该磁性离子印迹聚合物成功用于水样中微量Cu(Ⅱ)和Pb(Ⅱ)的分离和检测,Cu(Ⅱ)和Pb(Ⅱ)的回收率分别为81.99%~89.91%和81.24%~95.15%。     

Nanostructured films from phthalocyanine and carbon nanotubes: surface morphology and electrical characterization

We report on the investigation of the surface morphology and DC conductivity of nanostructured layer-by-layer (LbL) films from nickel tetrasulfonated phthalocyanine (NiTsPc) alternated with either multi-walled carbon nanotubes (MWNTs/NiTsPc) or multi-walled carbon nanotubes dispersed in chitosan (MWNTs+Ch/NiTsPc). We have explored the surface morphology of the films by using fractal concepts and dynamic scale laws. The MWNTs/NiTsPc LbL films were found to have a fractal dimension of ca. 2, indicating a quasi Euclidean surface. MWNTs+Ch/NiTsPc LbL films are described by the Lai-Das Sarma-Villain (LDV) model, which predicts the deposition of particles and their subsequent relaxation. An increase in the wetting contact angle of MWNTs+Ch/NiTsPc LbL films was observed, as compared with MWNTs/NiTsPc LbL films, which presented an increase in the fractal dimension of the first system. Room temperature conductivities were found be ca. 0.45 S/cm for MWNTs/NiTsPc and 1.35 S/cm for MWNTs+Ch/NiTsPc.     

氮杂冠醚接枝壳聚糖的合成及其对金属离子的吸附性能

本文利用壳聚糖Ｃ２位上活泼的氨基先与苯醛反应制备成保护氨基的Ｓｃｈｉｆｆ碱壳聚糖,再将含环氧基的氮杂冠醚接枝到壳聚糖的Ｃ６位上,制得含Ｓｃｈｉｆｆ碱的氮杂冠醚壳聚糖,随后使其在一定条件下脱去苯甲醛,合成了一种含氮杂冠醚功能基的新型壳聚糖衍生物,研究了其重金属离子Ｐｂ＾２＋,Ｃｕ＾２＋、Ｃｒ＾３＋、Ｃｄ＾２＋的静态吸附性能。结果表明,该吸附剂对重金属离子具有较强的吸附能力,在Ｐｈ＾２＋、Ｃｕ＾２＋、     

Composite film of carbon nanotubes and chitosan for preparation of amperometric hydrogen peroxide biosensor

A new amperometric biosensor for hydrogen peroxide was developed based on cross-linking horseradish peroxidase (HRP) by glutaraldehyde with multiwall carbon nanotubes/chitosan (MWNTs/chitosan) composite film coated on a glassy carbon electrode. MWNTs were firstly dissolved in a chitosan solution. Then the morphology of MWNTs/chitosan composite film was characterized by field-emission scanning electron microscopy. The results showed that MWNTs were well soluble in chitosan and robust films could be formed on the surface. HRP was cross-linked by glutaraldehyde with MWNTs/chitosan film to prepare a hydrogen peroxide biosensor. The enzyme electrode exhibited excellent electrocatalytic activity and rapid response for H₂O₂ in the absence of a mediator. The linear range of detection towards H₂O₂ (applied potential: −0.2 V) was from 1.67 × 10⁻⁵ to 7.40 × 10⁻⁴ M with correction coefficient of 0.998. The biosensor had good repeatability and stability for the determination of H₂O₂. There were no interferences from ascorbic acid, glucose, citrate acid and lactic acid.     

壳聚糖衍生物处理碳纳米管改性聚丙烯腈基碳纤维

自制了邻苯二甲酰化壳聚糖、萘甲酰化壳聚糖、羧甲基化壳聚糖等3种壳聚糖衍生物对多壁碳纳米管(MWNTs)进行表面处理,发现邻苯二甲酰化壳聚糖(PhthCS)能有效提高MWNTs在极性6～10范围溶剂中的分散性及稳定性,并考察了PhthCS的分子量及浓度对MWNTs的分散性及稳定性的影响;通过微观形貌和元素分析,发现MWN...     

THE THEORETICAL STUDY OF ADSORPTION OF METAL IONS ON CHITOSAN

The interactions between metal ions such as Zn2+, Pb2+, Mn2+, Hg2+, Cd2+, Ni2+ and chitosan have been investigated using the model cluster model method and density functional method. Full optimization and frequency analysis of all cluster models have been performed employing B3LYP hybrid method at 3-21G basis set level except metal ions which were invoked to use effective core potential (ECP) method. The energy changes, and the main structural parameters have been obtained during the theoretical study of the adsorption of metal ions on the chitosan. The calculations showed that the coordination modes of metal ions with chitosan models were different, the geometries of Mn2+, Zn2+, Cd2+, Hg2+, Pb2+ ions coordinated with two nitrogen atoms and two oxygen atoms were distorted tetrahedral, while the square planar structure of Ni2+ coordinated two nitrogen atoms and two oxygen atoms was observed. The heat of reaction between six metal ions and chitosan models showed the order: Mn2+ ＞Ni2+ ＞Zn2+ ＞Pb2+ ＞Hg2+ ＞Cd2+, this suggested that the coordination strength of Mn2+ ＞Ni2+ ＞Zn2+ ＞Pb2+ ＞Hg2+ ＞Cd2+.     

3-N-乙酰基-2-取代芳基-5-[5''-甲基-异噁唑-3'']-Δ3-1,3,4－噁唑啉类化合物的合成

保护氨基的壳聚糖微球经环氧氯丙烷交联得到不溶于酸的吸附剂，与氯乙酸在碱性条件下反应，合成了羧甲基壳聚糖树脂，并用FT-IR对树脂进行了表征。其吸附Pb^2 的实验结果表明，在1h内有最快的吸附速率，吸附受pH值影响。在pH=5时，对Pb^2 的吸附量为1．12mmol／g，比壳聚糖树脂提高了70％。     

海藻酸-壳聚糖-海藻酸离子取代凝胶改性研究

羧甲基壳聚糖;微胶囊;海藻酸-壳聚糖-海藻酸离子取代凝胶改性研究     

交联黄原酸壳聚糖对铅离子的吸附研究

以壳聚糖为原料,通过交联和黄原酸化反应制备出交联黄原酸壳聚糖,采用FT-IR和XRD表征了其结构,并探讨壳聚糖及交联黄原酸壳聚糖对Pb2+的吸附性能。研究了初始溶液pH值、温度以及吸附时间等因素对Pb2+吸附量的影响。结果表明,在Pb2+起始浓度0.01 M,起始溶液pH=5,室温25℃吸附2h条件下,壳聚糖和交联黄原酸壳聚糖对铅离子的吸附量分别为126.8 mg/g和238.9 mg/g,交联黄原酸壳聚糖吸附能力为壳聚糖的1.89倍。     

Comparative Adsorption of Lead(II) on Flake and Bead‐Types of Chitosan

The adsorption of Pb(II) ions from aqueous solutions by chitosan flakes and beads was studied. The chitosan beads were prepared by casting an acidic chitosan solution into alkaline solution. Experiments were carried out as a function of pH, agitation period and initial concentration of Pb²⁺ ions. The uptake of Pb²⁺ ions from aqueous solution was determined from changes in concentration as measured by atomic absorption spectroscopy. The maximum uptake of Pb²⁺ ions on chitosan beads was greater than that on chitosan flakes. Adsorption isothermal data could be interpreted by the Langmuir equation. The experimental data of the adsorption equilibrium from Pb²⁺ ion solutions correlated well with the Langmuir isotherm equation. SEM analyses were also conducted for visual examination of the chitosan flakes and beads. Physical properties including surface area and average pore diameter were characterized by N₂ adsorption experiment.     

New Nanocomposite Based on Prussian Blue Nanoparticles/Carbon Nanotubes/Chitosan and Its Application for Assembling of Amperometric Glucose Biosensor

Abstract

A new nanocomposite was developed by combination of prussian blue (PB) nanoparticles and multiwalled carbon nanotubes (MWNTs) in the matrix of biopolymer chitosan (CHIT). The PB and MWNTs had a synergistic electrocatalytic effect toward the reduction of hydrogen peroxide. The CHIT/MWNTs/PB nanocomposite‐modified glassy carbon (GC) electrode could amplify the reduction current of hydrogen peroxide by ～35 times compared with that of CHIT/MWNTs/GC electrode and reduce the response time from ～60 s for CHIT/PB/GC to 3 s. Besides, the CHIT/MWNTs/PB nanocomposite‐modified GC electrode could reduce hydrogen peroxide at a much lower applied potential and inhibit the responses of interferents such as ascorbic acid (AA) uric acid (UA) and acetaminophen (AC). With glucose oxidase (GOx) as an enzyme model, a new glucose biosensor was fabricated. The biosensor exhibited excellent sensitivity (the detection limit is down to 2.5 µM), fast response time (less than 5 s), wide linear range (from 4 µM to 2 mM), and good selection.