Liquid—Liquid Equilibrium in Polydisperse Random Copolymer Blends

Continuous thermodynamics is applied to the liquid‐liquid equilibrium in random copolymer blends. Two copolymers are mixed, each consisting of two different monomer units. Hence, up to four monomer units may be present in the system. Both copolymers are characterized by divariate distribution functions with respect to molecular weight (chain length) and chemical composition. The basic relations necessary for phase equilibrium calculations are derived. The influences of both polydispersities and of the different parameters included in the model for the excess Gibbs free energy are discussed by calculating cloud‐point curves and shadow curves. Applications to practical systems are given.     

LC Determination of Chloramphenicol in Honey Using Dispersive Liquid–Liquid Microextraction

A novel method, dispersive liquid–liquid microextraction coupled with liquid chromatography-variable wavelength detector (LC-VWD), has been developed for the determination of chloramphenicol (CAP) in honey. A mixture of extraction solvent (30 μL 1,1,2,2-tetrachloroethane) and dispersive solvent (1.00 mL acetonitrile) were rapidly injected by syringe into a 5.0 mL real sample for the formation of cloudy solution, the analyte in the sample was extracted into the fine droplets of C₂H₂Cl₄. After extraction, phase separation was performed by centrifugation and the enriched analyte in the sedimented phase was determined by LC-VWD. Some important parameters, such as the kind and volume of extraction solvent and dispersive solvent, extraction time, sample solution pH, sample volume and salt effect were investigated and optimized. Under the optimum extraction condition, the method yields a linear calibration curve in the concentration range from 3 to 2,000 μg kg^?1 for target analyte. The enrichment factor for CAP was 68.2, and the limit of detection (S/N = 3) were 0.6 μg kg^?1. The relative standard deviation (RSD) for the extraction of 10 μg kg^?1 of CAP was 4.3% (n = 6). The main advantages of method are high speed, high enrichment factor, high recovery, good repeatability and extraction solvent volume at μL level. Honey samples were successfully analyzed using the proposed method.     

Spectrophotometric Determination of Copper in Waste Water Using Liquid–Liquid Extraction in a Flow-Injection System

A flow-injection procedure for the determination of copper in waste water is described. The procedure is based on the formation of an ion-pair between tetrabutylammonium and the tetrathiocyanatocuprate(II) anion. This ion-pair is extracted with chloroform, and the absorbance of the organic phase is measured at 485nm. Concentrations of copper 0.4mg L^–1 can be detected with a linear application range of between 0.5 and 25mg L^–1, a relative standard deviation of 2.3% (0.8mg L^–1, n=10) and a sampling frequency of 30h^–1. Under the proposed working conditions, only Ni(II) and Pd(II) interfere at molar ratios Ni(II)/Cu(II) 50 and Pd(II)/Cu(II) 100.     

Electropolymerization of O-Phenylenediamine in an Ionic Liquid

Ionic liquid like 1-ethyl-3-methylimidazolium bromine ([EMIM]Br) has been used as electrolyte for the electropolymerization of O-phenylenediamine at glassy carbon electrode by cyclic voltammetry. It is found that poly (O-phenylenediamine) film modified electrode has favorable electrochemical activity in acid solution.     

Facile Synthesis of Ureas in lonic Liquid

The reaction of isocyanates with aliphatic and aromatic amines in the l-n-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) ionic liquid in good to excellent yields is described.Due to its insolubility, the desired urea solids could be recovered by simple filtration from the ionic liquid after reaction.     

Facile Synthesis of Ureas in Ionic Liquid

The urea functional group is of importance in a wide range of biological compounds such as enzyme inhibitors1 and pseudopeptides2. Substituted ureas are widely applied in fine chemical industry, especially pesticides3 and pharmaceuticals4. Many investigations have been made to search for an efficient and practical method to synthesize ureas. The typical procedure for the synthesis of ureas is treating isocyanates with primary or secondary amines in organic solvents5. In the presence of trans…     

Magnetic Solid-Phase Extraction and Ionic Liquid Dispersive Liquid–Liquid Microextraction Coupled with High-Performance Liquid Chromatography for the Determination of Hexachlorophene in Cosmetics

An efficient, simple, and fast method based on ionic liquid dispersive liquid–liquid microextraction (IL-DLLME) followed by magnetic solid-phase extraction (MSPE) was developed as a new technique for extracting and purifying hexachlorophene (HCP) in cosmetics prior to high-performance liquid chromatography (HPLC) determination. In this method based on IL-DLLME and MSPE, 1-hexyl-3-methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]) is used as the extraction solvent and Fe₃O₄ nanoparticles are used to remove hydrophobic additives in the cosmetics by physical adsorption. The main parameters affecting the efficiency of the IL-DLLME and MSPE of HCP were investigated and optimized. Under the optimum conditions, the method was linear in the range 0.5–40 µg mL^?1 with a correlation coefficient (R ²) of 0.9976 and had a detection limit of 0.14 µg mL^?1 at a signal-to-noise ratio (S/N) of 3. The recoveries of HCP in three cosmetic samples using the proposed method were in the range 74.5–97.7%, and the relative standard deviations (RSD, n = 5) were in the range 3.8–6.7%. The developed method was successfully applied to the determination of HCP in cosmetics.     

Enantioseparation of Dioxopromethazine Hydrochloride in Urine with Liquid–Liquid Extraction by CE-ECL Detection

Capillary electrophoresis coupled with electrochemiluminescence detection was developed for the separation and determination of dioxopromethazine hydrochloride (DPZ) enantiomers. Performance parameters of the proposed method were evaluated. An improved separation of DPZ enantiomers could be achieved after adding boric acid to buffer. The enantiomers were completely separated with running buffer of 16.5 mM β-CD in 25 mM tris-H₃PO₄–40 mM H₃BO₃ at pH 2.5. The proposed method was successfully applied to the separation and determination of DPZ enantiomers in human urine with a liquid–liquid extraction procedure.     

Determination of Cadmium in Human Serum and Blood Samples after Dispersive Liquid–Liquid Microextraction Using a Task-Specific Ionic Liquid

Task-specific ionic liquid dispersive liquid–liquid microextraction (TSIL-DLLME) is a simple and rapid preconcentration approach for the measurement of cadmium in serum and blood samples of human subjects. In this method a novel task-specific ionic liquid, trioctylmethyl ammonium thiosalicylate (TOMATS), which has dual characteristics as a chelating agent and extractive solvent, was investigated. TOMATS complexes with Cd due to the chelating effect of the ortho-positioned carboxylate relative to the thiol functionality. The assessment of the optimum values of variables including the pH, amount of reagents (TOMATS, diluents, Triton X114, and back extracting acid solution), temperature, and incubation time, which affect the recoveries of analyte by TSIL-DLLME method were studied. After enrichment experiments, acidic solution was used to back extract the metal ions from the ionic liquid rich phase and with determination by electrothermal atomic absorption spectrometry. Using the optimal experimental conditions, the limit of detection (3?s), precision (relative standard deviation), preconcentration, and enhancement factors of developed method for Cd were found to be 0.05?µg/L, greater than 5%, 62.5, and 52.8, respectively. To check the accuracy of the developed method, certified reference material of serum and blood were analyzed by the developed method, and the measured values of Cd were in good agreement with the certified values. The developed method was applied successfully to determine Cd in blood and serum samples of lymphatic cancer patients relative to healthy controls.     

Liquid–Liquid Equilibrium for Fuel Oxygenate Systems Containing Dialkyl Carbonate in Aqueous Solution

Experimental tie-line data were investigated for two quaternary systems of water + n-hexane + diethyl carbonate + dimethyl carbonate and water + toluene + isooctane + dimethyl carbonate, and two related ternary systems of water + n-hexane + diethyl carbonate and water + n-hexane + dimethyl carbonate at 298.15 K and ambient pressure. The experimental tie-line data have been correlated using a modified UNIQUAC model and an extended UNIQUAC model, both with multicomponent interaction parameters in addition to the binary ones.     

The Ethylbenzene/Styrene Preferential Separation with Ionic Liquids in Liquid–Liquid Extraction

The objective of this work was to explore the feasibility of using ionic liquids (ILs), namely N-ethyl-N-methylmorpholinium dicyanamide, [EMMor][DCA], (3-hydroxypropyl)-1-methylmorpholinium dicyanamide, [N-C₃OHMMor][DCA], 1-(3-hydroxypropyl)-3-methylimidazolium dicyanamide, [N-C₃OHMIM][DCA], 1-(3-hydroxypropyl)pyridinium dicyanamide, [N-C₃OHPy][DCA], (3-cyanopropyl)pyridinium dicyanamide, [N-C₃CNPy][DCA], and (3-cyanopropyl)methylpyrrolidinium dicyanamide, [N-C₃CNMPyr][DCA] for the separation of ethylbenzene and styrene. The liquid–liquid equilibrium (LLE) data in ternary systems of {IL (1)?+?styrene (2)?+?ethylbenzene (3)} at T?=?298.15 K and ambient pressure is presented for the six ILs synthesized by us. The final chromatography analysis of the composition of tie-lines has shown that the studied ILs are not found in the raffinate phase and they show interesting results on the selectivity and solute distribution ratio for styrene extraction. A comparison of different ILs is presented for the studied separation problem. It was observed that the best separation selectivities were found for [N-C₃CNPy][DCA] (S_Av?=?2.38) and [N-C₃OHMMor][DCA] (S_Av?=?2.42) in comparison with other studied ILs in this work and those presented in the literature. While the data presented here are useful from a theoretical standpoint, the possibility of applications for these ILs in technological processes is questionable because of low solute distribution ratios, especially those calculated from the masses [N-C₃CNPy][DCA] (β_MAv?=?0.08) and [N-C₃OHMMor][DCA] (β_MAv?=?0.07). The experimental tie-lines were correlated with the non-random two liquid NRTL model.     

Electrochemical Synthesis of Polythiophene in an Ionic Liquid

Polythiophene(PTh) was prepared by the direct electrochemical synthesis in an ionic liquid ([BMIM]PF6) containing 0.1mol/L thiophene by cyclic voltammetry,constant potential and constant current techniques. It is found that smooth and blue-green PTh films can be obtained at a potential of ca. 1.75V(vs. Ag/AgCl) or a current of ca. 1.5mA cm^-2 in the ionic liquid.     

Liquid Chromatographic Determination of NSAIDs in Urine After Dispersive Liquid–Liquid Microextraction Based on Solidification of Floating Organic Droplets

An environmentally benign method of sample preparation based on dispersive liquid–liquid microextraction and solidification of floating organic droplets (DLLME-SFO) coupled with high-performance liquid chromatography with ultraviolet detection has been developed for analysis of non-steroidal anti-inflammatory drugs (NSAIDs) in biological fluids. A low-toxicity solvent was used to replace the chlorinated solvents commonly used in conventional DLLME. Seven conditions were investigated and optimized: type and volume of extraction solvent and dispersive solvent, extraction time, effect of addition of salt, and sample pH. Under the optimum conditions, good linearity was obtained in the range 0.01–10 µg mL⁻¹, with coefficients of determination (r ²) >0.9949. Detection limits were in the range 0.0034–0.0052 µg mL⁻¹ with good reproducibility (RSD) and satisfactory inter-day and intra-day recovery (95.7–115.6 %). The method was successfully used for analysis of diclofenac, mefenamic acid, and ketoprofen in human urine. Analysis of urine samples from a patient 2 and 4 h after administration of diclofenac revealed concentrations of 1.20 and 0.34 µg mL⁻¹, respectively.

     

Determination of Herbicides in Soil by Dispersive Solid-Phase Extraction,Dispersive Liquid–Liquid Microextraction,and High-Performance Liquid Chromatography

A method for determination of five herbicides (i.e., quinclorac, metsulfuron-methyl, bensulfuron-methyl, atrazine, prometryn) in soil was developed by dispersive solid-phase extraction combined with dispersive liquid–liquid microextraction and high-performance liquid chromatography. The analytes were removed from the soil by liquid partitioning with acetonitrile/5% acetic acid, purified using a octadecylsilane sorbent, and subsequently extracted before chromatographic analysis. Under the optimized conditions, the linear dynamic range was from 10.0 to 300 ng g^?1 with correlation coefficients (r) between 0.9971 and 0.9985. The limits of detection were between 1.5 and 3.1 ng g^?1, with relative standard deviations from 3.8% to 6.7% (n = 5). The recovery of the herbicides from soil at fortification levels of 20.0 and 100.0 ng g^?1 were between 71.5% and 94.3%. The method was successfully applied to the determination of the analytes in soil.     

Liquid–Liquid–Liquid Micro Extraction Combined with CE for the Determination of Rare Earth Elements in Water Samples

A simple method for determination of rare earth elements (REEs) by liquid–liquid–liquid microextraction (LLLME) coupled with capillary electrophoresis and ultraviolet technique was developed. In the LLLME system, 40 mmol L^?1 4-benzoyl-3-methy-1-phenyl-5-pyrazolinone (PMBP) acted as extractant and 4% (v/v) formic acid was used as back-extraction solution. The parameters influencing the LLLME, including the type of the organic solvent, sample pH, formic acid concentration, PMBP concentration, extraction time, volume of organic solvent, stirring rate and phase volume ratio, were investigated. Under the optimized conditions, the detection limits (S/N = 3) of REEs were in the range of 0.19–0.70 ng mL^?1. The developed method was successfully applied to the determination of trace amounts of REEs in water samples.     

Determination of Phthalate Esters in Wine Using Dispersive Liquid–Liquid Microextraction and Gas Chromatography

A simple and rapid efficient method was developed for the determination of phthalate esters using dispersive liquid–liquid microextraction followed by gas chromatography with flame ionization detection. A mixture of isopropanol (0.75 mL, dispersant) and carbon tetrachloride (30 µL, extractant) with sodium chloride (1%, w/v) was used for extraction. Under optimum conditions, the method provided linear calibration curves between 0.5 and 200 µg L^?1 for dibutyl phthalate, and 1.0 and 200 µg L^?1 for butyl benzyl phthalate, diethyl phthalate, and diisooctyl phthalate. The relative standard deviations for intra-day and inter-day analyses were less than 5.8% and 6.9%, respectively, with enrichment factors between 229 and 424. Two wine samples were analyzed with recoveries between 70.1% and 119.3%.     

Dispersive Liquid–Liquid Microextraction for the Preconcentration of Multiple Classes of Pesticides in Water

A simple, rapid, efficient, and environmentally friendly method was developed for the preconcentration of atrazine, simazine, diuron, bentazone, tebuconazole, and fipronil from water. Dispersive liquid–liquid microextraction was employed with determination by liquid chromatography–tandem mass spectrometry. The volumes of extraction and disperser solvents, the concentration of sodium chloride, and the pH were optimized by response surface methodology. The optimum conditions involved the use of 150 µL of 1:1 (v/v) monochlorobenzene:dichlorobenzene as the extraction solvent, 2 mL acetonitrile as the disperser solvent, and 10 mL of sample at pH 3.0. The accuracy was evaluated in terms of recovery values that were from 54 to 112%. The relative standard deviations ranged from 4 to 27%. The limits of quantification were between 0.005 and 0.05 µg L^?1. The optimized method had low matrix effects for the analytes and the results demonstrated application for the determination of pesticides in water.     

Electrochemical Reduction of Benzoylformic Acid in Ionic Liquid

Ionic Hquids possess a number of unique properties that makethem ideal electrolytes. Electrochical reduction of benzoyl-formic acid in room temperature ionic liquids as reaction media could be conducted with excellent performances without any ad-ditional supporting electrolyte. Electrolysis at glassy carbon electrode results in the formation of mandelic acid in 91% yield. And the electrochemical behavior of benzoylformic acid was investigated with the technique of cyclic voltammetry.     

Liquid—liquid distribution in reversed micellar systems

The equilibrium distribution of a hydrophilic solute (M^z+ between an aqueous phase and a reversed micellar organic phase (consisting of a surfactant HA with aggregation number x, and dissolved in a hydrocarbon diluent) is analyzed quantitatively by treating the reversed micelles as a pseudophase. It is shown that when the M—A complex is strongly solubilized by the micellar pseudophase, the distribution coefficient (D) has a first-order dependence on the concentration of micellized surfactant (C_s). On the other hand, when the M—A complex is not solubilized by the reversed micelles, a plot of log D versus log C_s has a slope of (z/x); in this case the monomeric species HA is the active extractant and any effect that decreases surfactant aggregation (e.g. low aggregation number, small aggregation equilibrium constant) leads to an increase in the distribution coefficient.     

Homogeneous Liquid–Liquid Microextraction for Determination of Organochlorine Pesticides in Water and Fruit Samples

A fast and effective preconcentration method for extraction of organochlorine pesticides (OCPs) was developed using a homogeneous liquid–liquid extraction based on phase separation phenomenon in a ternary solvent (water/methanol/chloroform) system. The phase separation phenomenon occurred by salt addition. After centrifugation, the extraction solvent was sedimented in the bottom of the conical test tube. The OCPs were transferred into the sedimented phase during the phase separation step. The extracted OCPs were determined using gas chromatography–electron capture detector. Several factors influencing the extraction efficiency were investigated and optimized. Optimal results were obtained at the following conditions: volume of the consolute solvent (methanol), 1.0 mL; volume of the extraction solvent (chloroform), 55 μL; volume of the sample, 5 mL; and concentration of NaCl, 5 % (w/v). Under optimal conditions, the preconcentration factors in the range of 486–1,090, the dynamic linear range of 0.01–100 μg L^?1, and the limits of detection of 0.001–0.03 μg L^?1 were obtained for the OCPs. Using internal standard, the relative standard deviations for 1 μg L^?1 of the OCPs in the water samples were obtained in the range of 4.9–8.6 % (n = 5). Finally, the proposed method was successfully applied for extraction and determination of the OCPs in water and fruit samples.