Syntheses of MO2 (M=Si, Ce, Sn) nanoparticles by solid-state reactions at ambient temperature

Nano oxides (SiO₂, CeO₂, SnO₂) were successfully synthesized by solid-state reactions at ambient temperature. The nanoparticles were characterized by X-ray powder diffraction, TEM, BET, and TGA-DTA. The SiO₂ particles were also investigated using IR spectra. Effects of calcination on the nanoparticles were studied in this paper. The solid-state reaction technique is a convenient, inexpensive and an effective preparation method of monodisperse oxide nanoparticles in high yield. The mechanisms of the formation of nano materials by solid-state reactions at ambient temperature were primarily investigated.     

Theoretical investigation on H2 elimination reactions of germylenoid H2GeLiF with RH (R = F, OH, and NH2)

The H₂ elimination reactions of the germylenoid H₂GeLiF with RH (R = F, OH, NH₂) have been studied by using the DFT B3LYP and QCISD methods. The calculated results indicate that all the mechanisms of the three reactions are identical to each other and under the same condition the H₂ elimination reactions should occur easily in the order of H-F > H-OH > H-NH₂. In THF solvent the H₂ elimination reactions get more difficult than in gas phase. Compared with the insertion reactions of H₂GeLiF with RH (R = F, OH, NH₂), the H₂ elimination reactions have the lower activation barriers and should be more favorable.     

Silica-supported perchloric acid and potassium bisulfate as reusable green catalysts for nitration of aromatics under solvent-free microwave conditions

Silica-supported perchloric acid and bisulfate (SiO₂/HClO₄ and SiO₂/KHSO₄) have been developed as reusable green catalysts for nitration of aromatic compounds using NaNO₂ in acetonitrile medium under conventional and solvent-free microwave conditions. The reaction times under microwave irradiation are significantly shorter than conventional method even though the yields obtained in microwave-assisted reactions are comparable with those obtained under reflux conditions.     

An efficient palladium catalytic system for microwave assisted cyanation of aryl halides

Application of a new catalytic system for cyanation reaction of various aryl halides using K₄[Fe(CN)₆] as cyanating source was examined. The reactions were performed under microwave irradiation and results showed that application of this catalytic system and DMF at 130 °C minimized the reaction times from hours to minutes in good to excellent yields.     

Reactivity investigations of some chosen peroxo-vanadium(V), manganese(III) and chromium(VI) compounds

An interpretative account of the results of reactions in aqueous medium of a highly peroxygenated vanadium(V) complex, K [V(O_{2 3}]·3H₂O, with different organic and inorganic substrates is presented. The reactions were monitored by solution EPR spectroscopy and isolation of products at different stages of the reactions. Redox reactions between diperoxide, K[VO(O₂)₂(H₂O)] and VOSO₄ were conducted. The results of the investigation suggest that secondary oxygen exchange-reaction occurs which not only depends on but also utilises the intermediates in the primary reaction during diperoxovanadate-dependent oxidation of VOSO₄. In an interesting reactiontris(acetylacetonato)-manganese(III), Mn(acac)₃, on being reacted with a hydrogen peroxide adduct, KF·H₂O₂, and bpy and phen afforded crystalline [Mn(acac)₂(bpy)] and [Mn(acac)₂(phen)], respectively. The X-ray structural analysis of [Mn(acac)₂(phen)] showed that the compound crystallised in orthorhombic space groupPbcn. The structure consists of a pseudooctahedral Mn(II) ion being bound to two acac⁻(C₅H₅O ₂ ⁻ ) and a phen ligand with the molecule lying on two-fold axis. Reactivity profiles of two new chromium(VI) reagents viz., pyridinium fluorochromate, C₅H₅NH[CrO₃F] (PFC), and quinolinium fluorochromate C₉H₇NH [CrO₃F] (QFC), have been presented. The compounds are capable of acting as both electron-transfer and oxygen-atom-transfer agents. The X-ray analysis of PFC crystals reveals that the compound crystallises in the orthorhombic space group CmcZ₁. The structure consists of discrete pyridinium cations and CrO₃ F anions with no significant hydrogen bonding. This results in total disorder of the pyridinium cation. The tetrahedral [CrO₃ F]⁻ ion lies on a crystallographic mirror plane.     

Direct dynamics studies for the reactions of CF3CHFCF3 and CF3CF2CHF2 with H atoms

The rate constants of the hydrogen abstraction reactions of CF₃CHFCF₃ + H (R1) and CF₃CF₂CHF₂ + H (R2) have been calculated by means of the dual-level direct dynamics method. Optimized geometries and frequencies of stationary points and extra points along the minimum-energy path (MEP) are obtained at the MPW1K/6-311+G(d,p) level, and the classical energetic information is further corrected with the interpolated single-point energy (ISPE) approach by the G3(MP2) level of theory. Using the canonical variational transition state theory (CVT) with small-curvature tunneling corrections (SCT), the rate constants are evaluated over a wide temperature range of 200-2000 K. The calculated CVT/SCT rate constants are in good agreement with available experimental values. It is found that the variational effect is very small and almost negligible over the whole temperature region. However, the small-curvature tunneling correction plays an important role in the lower temperature range. Furthermore, the heats of formation of species CF₃CF₂CHF₂ (SC₁ or SC₂) and CF₃CF₂CF₂ are studied using isodesmic reactions to further elucidate the thermodynamic properties.     

反式2-甲基-2-丁烯酸甲酯与臭氧反应机理的计算研究

采用G3B3方法构建反式2-甲基-2-丁烯酸甲酯与O3反应体系以及后续Criegee自由基有、无水分子参与下异构化反应的势能面剖面.结果表明,反式2-甲基-2-丁烯酸甲酯与O3反应首先生成一个稳定的五元环中间体,此中间体按断键位置不同后续裂解反应存在两条路径,分别生成产物P1(CH3CHOO+CH3OC(O)C(CH3)O)和P2(CH3CHO+CH3OC(O)C(CH3)OO).利用经典过渡态理论(TST)并结合Wigner矫正模型计算了200-1200 K温度区间内标题反应的速率常数kTST/W.计算结果显示,294 K时,该反应速率常数为7.55×10-18cm3molecule-1s-1,与Bernard等对类似反应所测实验值非常接近.生成的Criegee自由基(CH3CHOO和CH3OC(O)C(CH3)OO)可分别与水分子发生α-加成及β-氢迁移反应,其中Criegee自由基与水的α-加成反应较其与水的β-氢迁移反应具有优势.另外与无水分子参与CH3CHOO和CH3OC(O)C(CH3)OO异构化反应相比,水分子的参与使得异构化反应较为容易进行.     

Thermal decomposition of cobalt nitrato compounds: Preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra

The thermal decomposition of Co(NO₃)₂·6H₂O (1) as well as that one of NO[Co(NO₃)₃] (Co(NO₃)₂·N₂O₄) (2) was followed by thermogravimetric (TG) measurements, X-ray recording and Raman and IR spectra. The stepwise decomposition reactions of 1 and 2 leading to anhydrous cobalt(II)nitrate (3) were established. In N₂ atmosphere, cobalt oxides are finally formed whereas in H₂/N₂ (10% H₂) cobalt metal is produced. Rapid heating of cobalt(II)nitrate hexahydrate causes melting (formation of a hydrate melt) and therefore side reactions in the hydrate melt by incoupled reactions and evolution/evaporation of different species as, e.g., HNO₃, NO₂, etc. In case of larger amounts in dense packing in the sample container, the formation of oxo(hydoxo)nitrates is possible at higher temperature. For 2, its thermal decomposition to 3 was followed and its decomposition mechanism is proposed.     

ZnFe2O4 nanoparticles: A green and recyclable magnetic catalyst for fast and regioselective conversion of epoxides to vicinal hydroxythiocyanates using NH4SCN under solvent-free conditions

ZnFe₂O₄ nanoparticles were synthesized and used as recyclable magnetic catalyst in the solvent-free conversion of different epoxides to vicinal hydroxythiocyanates with NH₄SCN at room temperature. The reactions were carried out by grinding in a mortar with perfect regioselectivity within short times (2-25 min) and with high to excellent yields (75–95%). The nanocatalyst was separated easily using an external magnet and reused for four consecutive cycles without any noticeable loss of efficiency or magnetic property.     

Characterization of silicon nitride particles synthesized in an atmospheric-pressure convection-stabilized arc

Silicon nitride powders were synthesized in an atmospheric-pressure convection-stabilized arc using silicon and ammonia as reactants. The morphology and particle size distributions of the silicon nitride particles were characterized by SEM, TEM, and electron diffraction analyses. The silicon nitride particles collected in the plasma reactor were formed by either gas-condensed phase reactions or chemical vapor reactions. The morphologies of the particles formed by gas-condensed phase reactions consisted of -Si₃N₄ prisms, -Si₃N₄ matte, -Si₃N₄ needles, and spaghetti-like whiskers. For the homogeneously nucleated particles, the morphologies included dendrites, needles, platelets, and amorphous particles. Most of the particles formed were aggregates with particle size distributions ranging from 500 to 1500 Å depending on the location of injection of the reactants.     

Regioselective hydrothiolation of terminal acetylene catalyzed by magnetite (Fe3O4) nanoparticles

Herein, we report a new and solvent-free methodology for the preparation of vinyl thioethers from terminal alkynes and thiols, using magnetite (Fe₃O₄) nanoparticles as a recyclable catalyst. With this greener method, the desired vinyl thioethers were achieved in good yields and with good stereoselectivity. In addition, the catalyst was easily recovered using a simple external magnet and reused for further catalytic reactions without significant loss of activity up to the fifth cycle.     

Theoretical study on activation mechanism of fluorine substitution reactions of Keggin-MAl12 in aqueous solutions

The fluorine substitution reactions of Keggin polymeric aluminum species K-MAl₁₂ (M = Al, Ga, Ge) were investigated using density functional theory. Two substitution pathways (associative and dissociative) were simulated. The results show that the replacement of charged tetrahedral center metals causes the change in energy barrier either for associative mechanism or dissociative mechanism. The preferred activation mechanisms are proposed by comparing associative and dissociative barriers for fluorine substitution reactions of three Keggin Al species. The fluorine substitution reactions of Al₁₃ and GaAl₁₂ are inclined to dissociative mechanism and GeAl₁₂ follows an associative mode, indicating a mechanistic variation induced by the alteration of tetrahedral metals.     

A novel multi-component reaction of indole, formaldehyde, and tertiary aromatic amines

A novel multi-component reaction of indoles, formaldehydes, and tertiary aromatic amines is described for the synthesis of dialkylaminoarylated indoles using silica-supported perchloric acid (HClO₄-SiO₂) as an inexpensive and highly efficient catalyst. The key features of this multi-component reactions are operational simplicity, mild reaction conditions, regioselectivity, and recycling of catalyst.     

A model for the etching of silicon in SF6/O2 plasmas

A model has been developed to describe the chemistry which occurs in SF₆/O₂ plasmas and the etching of silicon in these plasmas. Emphasis is placed nn the gas-phase free radical reactions, and the predictions n( the model are compared with experimental results. Forty-seven reactions are included, although a subset of 18 reactions describes the chemistry equally well. Agreement between the calculated and measured concentrations of stable products downstream of the plasma is better than a factor of 2. The need for additional kinetic data and fàr well-characterized diagnostic studies of SF₆/O₂ plasmas is discussed.     

Picolinimidoamide-Cu(II) complex anchored on Fe3O4@SiO2 core–shell magnetic nanoparticles: an efficient reusable catalyst for click reaction

A Cu(II) complex supported on Fe₃O₄@SiO₂ core–shell magnetic nanoparticles (MNPs) was prepared and characterized by FT-IR, XRD, SEM, EDX, TEM, VSM, TGA, and AAS analysis. The load of Cu on picolinimidoamide ligand anchored on Fe₃O₄@SiO₂ core–shell MNPs was determined as 1.22, 1.54, and 1.70 wt% using AAS, EDX and TGA analyses, respectively. Synthesized Cu(II) complex on Fe₃O₄@SiO₂ MNPs efficiently catalyzed a click reaction between alkyl halides, alkynes, and sodium azide to synthesize corresponding triazoles in high to excellent yields. The catalyst was recovered using an external magnetic field, and recycled for subsequent reactions without substantial loss of efficiency.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

Improvements in selectivity and stability of Rh catalysts modified by SnBu4. dehydrogenation of isobutane to isobutene

RhSn/SiO₂ bimetallic catalysts prepared via an organometallic route have proved to be very active and selective toward several hydrogenation reactions. In this work these catalysts were studied for the dehydrogenation of isobutane to isobutene. It was found that Rh/SiO₂ monometallic catalysts had a null selectivity to isobutene, and this selectivity increased up to more than 90% after the addition of tin, using SnBu₄ as precursor.     

Rapid Method of Converting Primary Amides to Nitriles and Nitriles to Primary Amides by ZnCl2 using Microwaves under Different Reaction Conditions

A rapid and facile method for the conversion of primary amides to nitriles using inexpensive and readily available ZnCl₂ in aqueous acetonitrile and their regeneration using ZnCl₂–H₂O–THF in the presence of acetamide under microwave irradiation in good yields is reported. The reactions go to completion within a minute.     

Mechanochemical synthesis of rutile-type CrMO4 (M=V, Sb) and their solid solutions

Grinding a mixture of hydrous amorphous chromium oxide (Cr₂O₃·nH₂O), vanadium oxide (V₂O₅) and antimony oxide (Sb₂O₅) was conducted by using a planetary ball mill, to investigate their mechanochemical reactions to form chromium vanadium oxide (CrVO₄) and chromium antimony oxide (CrSbO₄). The synthesis reactions proceed with an increase in grinding periods of time. The ground samples consist of agglomerates with particle size of about ten nanometers. The synthesized CrVO₄ sample exhibits a rutile-type tetragonal crystal structure, which is a high pressure phase. Additionally, solid solutions, CrV_1−xSb_xO₄ (x=0∼1, Δx=0.25), have been synthesized mechanochemically from the mixtures of Cr₂O₃·nH₂O, V₂O₅ and Sb₂O₅.     

Thermal characterisation of alumina supported chromium and platinum–chromium catalysts

This study presented results on reduction of alumina supported chromium and platinum–chromium catalysts using temperature programmed reduction method (TPR). It has been shown that catalysts after earlier oxidation step but without calcinations one undergo reduction in lower temperature in comparison to calcined only catalysts. Moreover, addition platinum to Cr/Al₂O₃ catalysts also caused decrease of reduction temperature. It has been observed that over the examined catalysts oxidation CO to CO₂ and reduction CO to CH₄ occurs. However, on Pt–Cr catalysts both reactions proceed at lower temperature compare to Cr catalysts.