聚乙烯吡咯烷酮包裹核壳型Fe_3O_4/Au纳米粒子的制备

采用改进的Polyol合成法,以聚乙烯吡咯烷酮（PVP）为表面活性剂制备PVP包裹的单分散的Fe3O4/Au纳米粒子.透射电镜（TEM）和X射线衍射（XRD）分析证实了Fe3O4/Au的核壳型纳米结构,并确定了纳米粒子的尺寸大小和分布.UV-Vis测定显示了所制备的纳米粒子具有光学活性,而振动样品磁强计（VSM）测量显示纳米粒子具有优异的磁化率.     

激光光散射和电子自旋共振技术研究十二烷基硫酸钠与聚乙烯吡咯烷酮的相互作用

应用动态激光光散射(DLS)和电子自旋共振(ESR)测定研究了单长链表面活性剂十二烷基硫酸钠(SDS)与聚乙烯吡咯烷酮(PVP)相互作用.DLS测定结果表明:SDS在水中形成动力学半径约为61 nm的胶束聚集体,PVP在水中卷曲成动力学半径约为12 nm的线圈,DLS确定的SDS临界胶束浓度(cmc)为6.4×10^-3 mol·L^-1, PVP-SDS具有强的相互作用,PVP分子缠绕在SDS胶束聚集体的周围,屏蔽了SDS胶束聚集体表面碳氢基团与连续水相的接触;ESR结果表明:自由基探针5-doxyl stearic acid在SDS形成胶束聚集体后,从一个较强极性的连续相转变到较小极性的胶束聚集体内核中,胶束聚集体内核的微粘度较纯水的大,SDS与PVP复合聚集体的微观粘度较SDS胶束溶液的大,ESR确定SDS的cmc为6.8×10^-3 mol·L^-1.     

自组装金属有机纳米管模板法制备高分子纳米管

高分子纳米管(PNT)是一类具有中空管状结构的高分子纳米材料, 模板法是制备管状高分子纳米材料的有效方法. 本研究以自组装金属有机纳米管(MONT)为模板, 杈状多元胺和多元羧酸为前体分子, 利用杈状多元胺与MONT表面的铜离子配位络合, 在MONT表面上形成包覆层, 再与同样具有杈状结构的多元羧酸活化酯进行交联反应后, 去除掉内部的自组装模板, 从而制得具有良好水分散性的PNT. 利用扫描电子显微镜(SEM)、扫描透射电子显微镜(STEM)、差示扫描量热仪(DSC)、X射线衍射(XRD)和漫反射傅立叶变换红外光谱(DRIFTS)对PNT的表面形貌、组成和结构进行了表征. 结果表明, 当多元胺用量为MONT用量的0.4摩尔当量时, 交联产物的成管率最高, 达80%以上, 纳米管的长度大多为500 nm~3 μm、内径为60~100 nm、外径80~120 nm.     

模板法制备聚乙烯咔唑及其复合物纳米管有序阵列

近十几年来,纳米管引起了人们越来越多的关注,不仅仅是由于它独特的性质,也因为它们在电、磁以及光电器件上具有广泛的应用前景。纳米管的制备方法大体上分为两种:自组装法[1￣3]和模板法[4￣7]。尽管自组装法已成功地制得了一些纳米管,但由于它对构造纳米管的材料有着较严格的     

PVP-b-PLA 修饰 Fe3O4 磁性纳米粒子的制备与表征

通过硅烷偶联剂与Fe3O4磁性纳米粒子偶合在其表面引入C C端基,进一步与N-乙烯基吡咯烷酮(NVP)加成聚合制备含端羟基PVP包裹的磁体,再引发丙交酯(LA)开环聚合制得PVP-b-PLA修饰的Fe3O4纳米粒子.通过XRD、GPC、FTIR、SEM、TG、DSC和激光粒度仪等,对产物进行分析和表征,结果表明,纳米Fe3O4与PVP以及PVP与PLA之间均为化学键联,PVP和PLA是以嵌段共聚物的形式存在且两者之间存在明显的微相分离,纳米Fe3O4表面聚合物包覆率为35%,厚度约13 nm.此外,该PVP-b-PLA包覆的磁性纳米粒子比饱和磁化强度为53 emu/g,与未包覆相比下降约25%.     

聚乙烯吡咯烷酮保护荧光铜纳米团簇制备及其对乙醇的快速准确检测

乙醇含量的精确定量检测对于环境监测、临床诊断、食品检测以及饮用酒水都至关重要。以氯化铜（CuCl₂）为铜源、聚乙烯吡咯烷酮（PVP）为保护剂、2-巯基苯并噻唑（MBT）为稳定剂、抗坏血酸（AA）为还原剂,利用声化学还原法,以绿色简单、快速便捷的手段成功合成出具有橙色荧光的铜纳米团簇（PVP-Cu NCs）。利用紫外可见吸收光谱、荧光光谱、红外光谱、透射电镜和X射线光电子能谱技术研究其结构和性能,发现PVP-Cu NCs的最佳激发波长和发射波长分别为340和580 nm,其平均粒径为6.0 nm。PVP-Cu NCs可通过聚集诱导猝灭机制实现对乙醇的灵敏检测,其荧光强度与乙醇含量在体积分数5%~45%范围内呈现出良好的线性关系,且PVP-Cu NCs可制作成乙醇检测试纸,对乙醇进行可视化检测。     

一锅法合成聚乙烯吡咯烷酮修饰的铜纳米团簇用于槲皮素的检测

作为检测槲皮素的有效途径,在荧光法中如何通过简单的方法合成性能优良的荧光探针具有重要的意义。 本文以聚乙烯吡咯烷酮(PVP)为保护剂,抗坏血酸为还原剂,化学还原法合成PVP保护的分散性好、稳定性高、强荧光的铜纳米团簇(PVP-Cu NCs)。 样品表现出良好的水溶性,光稳定性和强离子稳定性。 通过紫外可见光谱(UV-Vis)、分子荧光光谱、透射电子显微镜(TEM)和X射线光电子能谱分析(XPS)对铜纳米团簇的光学性质和结构进行了分析。 结果表明:该铜纳米团簇的最大激发和发射波长分别为366和429 nm,平均粒径大小为2 nm。 基于槲皮素对该铜纳米团簇的猝灭作用,构建了一种可用于检测槲皮素的荧光传感器。 该传感体系检测槲皮素的线性范围为0.1～0.9 μmol/L和15～60 μmol/L,检测限为0.053 μmol/L(S/N=3)。 该传感器对槲皮素的检测具有很高的灵敏度和良好的选择性,可用于实际样品中槲皮素的检测。     

无模板法聚苯胺纳米管的制备及表征

以过硫酸铵(APS)为氧化剂,在无模板,无掺杂酸条件下,利用超声辅助合成了聚苯胺纳米管.通过透射电子显微镜、傅里叶红外光谱、紫外-可见光谱、X-射线衍射对产物的形貌、结构和性能进行了表征.研究表明,形成的聚苯胺纳米管内径约为10 nm,外径约为80 nm,长度约为26μm,且管径均匀.苯胺单体浓度越高,聚合速率越快.但是,聚苯胺的形貌与苯胺单体的浓度无关,而与苯胺和过硫酸铵的摩尔比有关.超声在纳米管的形成中起主要作用,它阻止球状胶束无规则团聚,使得在较高的苯胺浓度下(0.2 mol/L)也可形成纳米管.合成的聚苯胺电导率为5×10-3S·cm-1,结晶度不高.     

溶胶-凝胶模板法制备钛酸钡纳米管

采用氢氧化钡和钛酸四丁酯为前驱体, 溶胶-凝胶结合模板法制备了钛酸钡纳米管, 通过SEM, TEM, XPS和XRD等表征分析, 钛酸钡纳米管直径100 nm, 钛酸钡为立方相结构, 晶胞参数a＝3.995 Å.     

Ni纳米管中填装γ-Fe2 O3复合纳米线的制备

近年来,纳米线、纳米棒以及纳米管等一维纳米材料由于在电学、磁学、光学和力学等性能方面表现出奇特的性能而引起了人们的广泛关注,目前,磁性纳米线的研究主要集中在单一种类纳米线的制备上,而对于两种不同磁性物质所组成的芯／壳复合纳米线的制备研究还不多见。     

聚乙烯醇/聚乙烯吡咯烷酮碱性复合膜的制备及其性能

通过在不同浓度KOH溶液中进行掺杂,制备出了聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)碱性聚合物电解质膜.详尽考察了膜的组成、微观结构、热稳定性、离子电导率和甲醇吸收率.结果表明,PVA与PVP两者具有较好的相容性,当m(PVA)∶m(PVP)=1∶0.5时,膜断面致密、均匀,未发生大尺度相分离.PVP的混入可以极大提高复合膜的电导率和热稳定性.当m(PVA)∶m(PVP)=1∶1时,复合膜的电导率可达2.01×10-3 S.cm-1.PVA/PVP/KOH膜的甲醇吸收率随温度的升高没有明显变化,100℃时其甲醇吸收率仅为同条件下Nafion 115膜的1/4.这表明该复合膜有望作为一种新型的碱性直接甲醇燃料电池用固体电解质膜且可提高膜的使用温度.     

聚乙烯吡咯烷酮/四氧化三铁复合纳米纤维的制备与表征

采用静电纺丝方法制备了聚乙烯吡咯烷酮/四氧化三铁复合纳米纤维, 并用透射电子显微镜(TEM)、X射线衍射(XRD)、热失重分析(TGA)和振动磁力分析进行了表征, 探讨了复合物的结构及其性能.     

高稳定性化学交联聚乙烯醇/聚乙烯吡咯烷酮碱性固体电解质膜

碱性固体电解质膜的稳定性是影响其在电化学领域应用的一个重要因素.本文在前期研究工作的基础上,通过直接共混和化学交联修饰制备出了聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)碱性聚合物电解质膜.采用傅里叶变换红外(FTIR)光谱、热重分析(TGA)、扫描电镜(SEM)和交流阻抗等方法详细考察了复合膜的分子结构、热稳定性、化学稳定性、氧化稳定性和尺寸稳定性.红外光谱结果表明,PVP成功地混入聚合物基体中,在1672cm-1处表现出来自于PVP第I带C襒O的强吸收峰.TGA结果表明,提高掺杂的KOH溶液浓度对PVA/PVP碱性膜的热稳定性没有明显影响.SEM分析结果表明,复合膜经高温、高浓度碱(80℃,10mol·L-1)处理后,其断面结构仍致密均匀,未出现类似小孔等膜降解情况,此时膜电导率(1.58×10-3S·cm-1)相比室温相同碱液时提高91.5%,表明PVA/PVP膜具有很好的耐碱化学稳定性.同时,PVA/PVP碱性膜表现出良好的抗氧化性,在60℃的3%和10%H2O2溶液中处理均没有观察到明显的质量损失,150h后仍能保持原膜质量的89%和85%.此外,由于膜内形成致密的内互交联网络结构,复合膜在水中800h之后也表现出很好的同向性和电导率稳定性.     

Rheological behaviour of irradiated wound dressing poly(vinyl pyrrolidone) hydrogels

The use of hydrogels as biomaterials has increased lately. Poly(vinyl pyrrolidone) (PVP) is an example of polymer hydrogels applied for the synthesis of hydrogel to be used in different biomedical applications. This paper describes a study on rheological properties of PVP hydrogels obtained by gamma radiation techniques. PVP hydrogels were obtained by gamma radiation of PVP water solutions with different radiation doses. It was studied the influence of additives such as poly(ethylene glycol) (PEG), poly(ethylene oxide) (PEO) and glycerol on the rheological behaviour of the gel. The rheological behaviour of hydrogel samples was characterized by measuring the shear storage modulus (G′) under dynamic shear loading. Besides this, sterility and cytotoxicity tests were performed. The study on rheological behaviour of hydrogels showed that G′ of PVP gels change according to the additive used. Glycerol increases the fluidity of the gel. The influence of PEG depends on the amount and on its molecular mass. The increase on PEG amount and molecular mass cause a decrease of G′ and an increase in the crosslinking density of PVP hydrogel network. The use of high molecular weight PEO allows the increase of the elasticity of the PVP gels.     

Synthesis and characterization of poly(vinyl pyrrolidone)-capped bismuth nanospheres

Poly(vinyl pyrrolidone)-capped bismuth nanospheres were synthesized by a simple and convenient wet chemical method. In the process, bismuth nitrate was reduced by ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP) at 185 °C in air. PVP was used as a protecting agent to prevent oxidation of the sperical bismuth particles. PVP molecules were absorbed on the surface of bismuth nanospheres through the interaction of O–Bi bond which was confirmed by Fourier transform infrared (FT-IR) measurement. The thermal analysis shows the samples contained about 73 wt.% metallic bismuth. The optical absorption spectrum of poly(vinyl pyrrolidone)-capped bismuth nanosphere shows a strong absorption band at 275 nm.     

Interaction of collagen and poly(vinyl pyrrolidone) in blends

The interaction between collagen and poly(vinyl pyrrolidone) (PVP) in blends has been studied by viscometry, differential scanning calorimetry (DSC) and by Fourier transform infrared spectroscopy (FTIR). It was found that the amide A and amide I bands position in FTIR spectra of collagen were shifted after blending with PVP to higher wavenumbers. DSC measurements showed different melting temperature, glass transition temperature and enthalpy for the blends and for the single components. Viscosity measurements showed interaction between collagen and PVP also in a dilute water solution.The results have shown, that the interactions between collagen and PVP exist due to the strong interactions between the synthetic and biological component, mainly by hydrogen bonds. These interactions caused that collagen and PVP are miscible at molecular level. The blending of collagen with PVP may give the possibility of producing new materials for potential biomedical applications.     

High-performances membranes for pervaporation I. Poly(vinyl alcohol)–poly(N-vinyl pyrrolidone) blends

Dense membranes were prepared from poly(vinyl alcohol)–poly(N-vinyl pyrrolidone) (PVA–PVP) blends of different compositions and studied in swelling and dehydration by pervaporation of three organic solvents contaminated by 5 wt% water. The swelling generally increases with the PVP content. No extraction occurs in water–tetrahydrofuran (THF) and water–methyl ethyl ketone (MEK) mixtures. In ethanol containing 10 wt% of water, there is no extraction for blends containing less than 40 wt% PVP and an increasing extraction beyond this PVP content. The pervaporation flux of the water–ethanol mixture increases drastically at the same threshold whereas the water permselectivity falls to a low level. The values of the diffusion and permeability coefficients determined from transient permeation of the test water–ethanol mixture exhibit a similar sudden increase at the same PVP content threshold. This singular behavior of the blend membranes is interpreted by a strong affinity of the PVP component to ethanol, combined with a disappearance of crystallites in the blend at this threshold. Consequently the amorphous membrane can swell freely according to the affinity of the PVP component, leading to the observed behavior.     

Electrospinning of poly(vinyl pyrrolidone)-iodine complex and poly(ethylene oxide)/poly(vinyl pyrrolidone)-iodine complex - a prospective route to antimicrobial wound dressing materials

New nanofibers containing poly(vinyl pyrrolidone)-iodine complex (PVP-iodine) were obtained by electrospinning in order to prepare materials suitable for wound dressings. Different approaches were used: a one-step method based on electrospinning of PVP-iodine or poly(ethylene oxide)/PVP-iodine solutions and a three-step method based on electrospinning of PVP or poly(ethylene oxide)/PVP mixed solutions followed by photo-mediated crosslinking of the obtained nanofibers and subsequent complexation with iodine. The average diameters of the fibers were in the range 150-470 nm depending on the composition and on the applied field strength (AFS) and increased with increasing the amount of PEO in the spinning solutions. Higher AFS resulted in greater fiber diameter and in size distribution broadening. Photo-mediated crosslinking in the presence of 4,4′-diazidostilbene-2,2′-disulfonic acid disodium salt successfully stabilized the electrospun PVP and PEO/PVP nanofibers against water and water vapor.     

Synthesis of Seven-Arm Poly(vinyl pyrrolidone) Star Polymers with Lysozyme Core Prepared by MADIX/RAFT Polymerization

A poly(vinyl pyrrolidone) (PVP) seven-arms star polymer with lysozyme core was synthesized by conjugating linear N-succinimidyl ester terminated PVP polymer to lysozyme. Reactive PVP polymers were synthesized using a MADIX/RAFT agent functionalized with N-succinimidyl ester. The polymerization of N-vinyl pyrrolidone proceeded in a living fashion up to more than 90% conversion reaching molecular weight of up to 33 000 g · mol⁻¹ with narrow molecular weight distributions. The PVP polymer was conjugated to lysozyme resulting in the attachment of seven PVP polymers to one lysozyme core. While the reaction was found to be complete when using low-molecular weight PVP, some by-products with less than seven arms were observed when using PVP with a molecular weight of 33 000 g · mol⁻¹.

     

Photochemical stability of poly(vinyl pyrrolidone) in the presence of collagen

The photochemical stability of poly(vinyl pyrrolidone) (PVP) in the presence of 1%, 3% and 5% of collagen has been studied by UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), thermogravimetry analysis (TG) and derivative thermogravimetry (DTG). Surface properties have been studied by contact angle measurements. PVP samples and samples containing 1%, 3% and 5% of collagen were irradiated with UV light of wavelength λ = 254 nm in air for up to 24 h. The amount of gel created during UV irradiation was estimated.PVP in the presence of 1%, 3% and 5% of collagen is less stable both thermally and photochemically. Collagen enhances photochemical processes leading to crosslinking of PVP. The contact angle measurements and values of surface free energy showed that the wettability of PVP films was changed by the addition of collagen and by UV irradiation. The increase of polarity of samples indicates an efficient photooxidation on the surface upon UV irradiation.