Evidence for static quenching of MLCT excited states by iodide

The metal-to-ligand charge-transfer (MLCT) excited states of Ru(deeb)(bpy)(2)(PF(6))(2) [where bpy is 2,2-bipyridine and deeb is 4,4'-(CO(2)CH(2)CH(3))(2)-2,2'-bipyridine] in acetonitrile or dichloromethane were found to be quenched by iodide at room temperature. The ionic strength dependence of the optical spectra gave evidence for ion pairing. Iodide is found to quench the photoluminescence (PL) intensity and influence the spectral distribution of the emitted light. A static component to the time-resolved PL quenching provided further evidence for ground-state adduct. Stern-Volmer analysis of the static component provided an estimate of the iodide-Ru(deeb)(bpy)(2)(2+) adduct equilibrium constant in dichloromethane, K(sv) = 40,000 M(-)(1). Transient absorption studies clearly demonstrate that an electron-transfer quenching mechanism is operative and that I(2)(-)(*) can be photoproduced in high yield, phi = 0.25. For Ru(bpy)(3)(PF(6))(2) in acetonitrile, similar behavior could be observed at iodide concentrations >100 times that required for dichloromethane.     

Intermolecular energy transfer across nanocrystalline semiconductor surfaces

The yields and dynamics for energy transfer from the metal-to-ligand charge-transfer excited states of Ru(deeb)(bpy)(2)(PF(6))(2), Ru(2+), and Os(deeb)(bpy)(2)(PF(6))(2), Os(2+), where deeb is 4,4'-(CH(3)CH(2)CO(2))(2)-2,2'-bipyridine, anchored to mesoporous nanocrystalline (anatase) TiO(2) thin films were quantified. Lateral energy transfer from Ru(2+)* to Os(2+) was observed, and the yields were measured as a function of the relative surface coverage and the external solvent environment (CH(3)CN, THF, CCl(4), and hexanes). Excited-state decay of Ru(2+)*/TiO(2) was well described by a parallel first- and second-order kinetic model, whereas Os(2+)*/TiO(2) decayed with first-order kinetics within experimental error. The first-order component was assigned to the radiative and nonradiative decay pathways (tau = 1 micros for Ru(2+)*/TiO(2) and tau = 50 ns for Os(2+)*/TiO(2)). The second-order component was attributed to intermolecular energy transfer followed by triplet-triplet annihilation. An analytical model was derived that allowed determination of the fraction of excited-states that follow the two pathways. The fraction of Ru(2+)*/TiO(2) that decayed through the second-order pathway increased with surface coverage and excitation intensity. Monte Carlo simulations were performed to estimate the Ru(2+)* --> Ru(2+) intermolecular energy transfer rate constant of (30 ns)(-1).     

Triiodide quenching of ruthenium MLCT excited state in solution and on TiO2 surfaces: an alternate pathway for charge recombination

The excited states of [Ru(bpy)2(deeb)](PF6)2, where bpy is 2,2-bipyridine and deeb is 4,4'-(CO2CH2CH3)2-2,2'-bipyridine, were found to be efficiently quenched by triiodide (I3-) in acetonitrile and dichloromethane. In dichloromethane, I3- was found to quench the excited states by static and dynamic mechanisms; Stern-Volmer analysis of the time-resolved and steady-state photoluminescence data produced self-consistent estimates for the I3- + Ru(bpy)2(deeb)2+ <==> [Ru(II)(bpy)2(deeb)2+,(I3-)]+ equilibrium, K = 51,000 M(-1), and the bimolecular quenching rate constant, kq = 4.0 x 10(10) M(-1) s(-1). In acetonitrile, there was no evidence for ion pairing and a dynamic quenching rate constant of k(q) = 4.7 x 10(10) M(-1) s(-1) was calculated. Comparative studies with Ru(bpy)2(deeb)2+ anchored to mesoporous nanocrystalline TiO2 thin films also showed efficient excited-state dynamic quenching by I3- in both acetonitrile and dichloromethane, kq = 1.8 x 10(9) and 3.6 x 10(10) M(-1) s(-1), respectively. No reaction products for the excited-state quenching processes were observed by nanosecond transient absorption measurements from 350 to 800 nm under any experimental conditions. X-ray crystallographic, IR, and Raman data gave evidence for interactions between I3- and the bpy and deeb ligands in the solid state.     

Influence of ion pairing on the oxidation of iodide by MLCT excited states

The oxidation of iodide to diiodide, I(2)˙(-), by the metal-to-ligand charge-transfer (MLCT) excited state of [Ru(deeb)(3)](2+), where deeb is 4,4'-(CO(2)CH(2)CH(3))(2)-2,2'-bipyridine, was quantified in acetonitrile and dichloromethane solution at room temperature. The redox and excited state properties of [Ru(deeb)(3)](2+) were similar in the two solvents; however, the mechanisms for excited state quenching by iodide were found to differ significantly. In acetonitrile, reaction of [Ru(deeb)(3)](2+*) and iodide was dynamic (lifetime quenching) with kinetics that followed the Stern-Volmer model (K(D) = 1.0 ± 0.01 × 10(5) M(-1), k(q) = 4.8 × 10(10) M(-1) s(-1)). Excited state reactivity was observed to be the result of reductive quenching that yielded the reduced ruthenium compound, [Ru(deeb(-))(deeb)(2)](+), and the iodine atom, I˙. In dichloromethane, excited state quenching was primarily static (photoluminescence amplitude quenching) and [Ru(deeb(-))(deeb)(2)](+) formed within 10 ns, consistent with the formation of ion pairs in the ground state that react rapidly upon visible light absorption. In both solvents the appearance of I(2)˙(-) could be time resolved. In acetonitrile, the rate constant for I(2)˙(-) growth, 2.2 ± 0.2 × 10(10) M(-1) s(-1), was found to be about a factor of two slower than the formation of [Ru(deeb(-))(deeb)(2)](+), indicating it was a secondary photoproduct. The delayed appearance of I(2)˙(-) was attributed to the reaction of iodine atoms with iodide. In dichloromethane, the growth of I(2)˙(-), 1.3 ± 0.4 × 10(10) M(-1) s(-1), was similar to that in acetonitrile, yet resulted from iodine atoms formed within the laser pulse. These results are discussed within the context of solar energy conversion by dye-sensitized solar cells and storage via chemical bond formation.     

Toward exceeding the Shockley-Queisser limit: photoinduced interfacial charge transfer processes that store energy in excess of the equilibrated excited state

Nanocrystalline (anatase), mesoporous TiO2 thin films were functionalized with [Ru(bpy)2(deebq)](PF6)2, [Ru(bq)2(deeb)](PF6)2, [Ru(deebq)2(bpy)](PF6)2, [Ru(bpy)(deebq)(NCS)2], or [Os(bpy)2(deebq)](PF6)2, where bpy is 2,2'-bipyridine, bq is 2,2'-biquinoline, and deeb and deebq are 4,4'-diethylester derivatives. These compounds bind to the nanocrystalline TiO2 films in their carboxylate forms with limiting surface coverages of 8 (+/- 2) x 10(-8) mol/cm2. Electrochemical measurements show that the first reduction of these compounds (-0.70 V vs SCE) occurs prior to TiO2 reduction. Steady state illumination in the presence of the sacrificial electron donor triethylamine leads to the appearance of the reduced sensitizer. The thermally equilibrated metal-to-ligand charge-transfer excited state and the reduced form of these compounds do not inject electrons into TiO2. Nanosecond transient absorption measurements demonstrate the formation of an extremely long-lived charge separated state based on equal concentrations of the reduced and oxidized compounds. The results are consistent with a mechanism of ultrafast excited-state injection into TiO2 followed by interfacial electron transfer to a ground-state compound. The quantum yield for this process was found to increase with excitation energy, a behavior attributed to stronger overlap between the excited sensitizer and the semiconductor acceptor states. For example, the quantum yields for [Os(bpy)2(dcbq)]/TiO2 were phi(417 nm) = 0.18 +/- 0.02, phi(532.5 nm) = 0.08 +/- 0.02, and phi(683 nm) = 0.05 +/- 0.01. Electron transfer to yield ground-state products occurs by lateral intermolecular charge transfer. The driving force for charge recombination was in excess of that stored in the photoluminescent excited state. Chronoabsorption measurements indicate that ligand-based intermolecular electron transfer was an order of magnitude faster than metal-centered intermolecular hole transfer. Charge recombination was quantified with the Kohlrausch-Williams-Watts model.     

A nuclear isotope effect for interfacial electron transfer: excited-state electron injection from Ru ammine compounds to nanocrystalline TiO2

The coordination compounds Ru(deeb)(NH3)4(PF6)2 and Ru(deeb)(NH2(CH2)2NH2)4(PF6)2, where deeb is 4,4'-(CO2CH2CH3)2-2,2'-bipyridine, were synthesized and attached to optically transparent nanocrystalline (anatase) TiO2 films. The compounds were found to be nonemissive in fluid acetonitrile and when attached to TiO2 with excited-state lifetimes <10 ns. Infrared measurements showed the expected isotopic substitution of the deuterated compounds on TiO2 thin films. A small 10-15 mV shift in the RuIII/II reduction potentials was measured upon deuteration. Metal-to-ligand charge-transfer (MLCT) excitation resulted in interfacial electron transfer into the TiO2 semiconductor with quantum yields that were dependent on the excitation wavelength and deuteration of the ammine ligands. The quantum yields were optimized with blue light excitation (417 nm) and deuterium substitution. In contrast, the kinetic rate constants for charge recombination were insensitive to deuteration and the excitation wavelength. Control experiments with Ru(deeb)(bpy)2(PF6)2 indicated that deuteration of the TiO2 surface alone does not affect the injection or recombination processes. A model is proposed wherein electron injection occurs in competition with vibrational relaxation and/or intersystem crossing of the excited states. Exchange of hydrogen by deuterium slows vibrational relaxation and/or intersystem crossing, resulting in higher injection yields.     

Reactions of acetonitrile coordinated to a nitrosylruthenium complex with H2O or CH(3)OH under mild conditions: structural characterization of imido-type complexes

The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) (bpy = 2,2'-bipyridine) in H(2)O at room temperature proceeded to afford two new nitrosylruthenium complexes. These complexes have been identified as nitrosylruthenium complexes containing the N-bound methylcarboxyimidato ligand, cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+), and methylcarboxyimido acid ligand, cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+), formed by an electrophilic reaction at the nitrile carbon of the acetonitrile coordinated to the ruthenium ion. The X-ray structure analysis on a single crystal obtained from CH(3)CN-H(2)O solution of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](PF(6))(3) has been performed: C(22)H(20.5)N(6)O(2)P(2.5)F(15)Ru, orthorhombic, Pccn, a = 15.966(1) A, b = 31.839(1) A, c = 11.707(1) A, V = 5950.8(4) A(3), and Z = 8. The structural results revealed that the single crystal consisted of 1:1 mixture of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+) and cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+) and the structural formula of this single crystal was thus [Ru(NO)(NH=C(OH(0.5))CH(3))(bpy)(2)](PF(6))(2.5). The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) in dry CH(3)OH-CH(3)CN at room temperature afforded a nitrosylruthenium complex containing the methyl methylcarboxyimidate ligand, cis-[Ru(NO)(NH=C(OCH(3))CH(3))(bpy)(2)](3+). The structure has been determined by X-ray structure analysis: C(25)H(29)N(8)O(18)Cl(3)Ru, monoclinic, P2(1)/c, a = 13.129(1) A, b = 17.053(1) A, c = 15.711(1) A, beta = 90.876(5) degrees, V = 3517.3(4) A(3), and Z = 4.     

High-extinction ruthenium compounds for sunlight harvesting and hole transport

The compounds Ru(bpy) 2(BTL)(PF 6) 2 and Ru(deeb) 2(BTL)(PF 6) 2, where bpy is 2,2'-bipyridine, deeb is 4,4'-(C 2H 5CO 2) 2-bpy, and BTL is 9'-[4,5-bis(cyanoethylthio)]-1,3-dithiol-2-ylidene]-4',5'-diazafluorene, were found to have very high extinction coefficients in the visible region. In an acetonitrile solution, the extinction of Ru(deeb) 2(BTL)(PF 6) 2 was = 44 000 +/- 1000 M (-1) cm (-1) at lambda = 470 nm. Two quasi-reversible oxidation waves, E 1/2 = +0.88 and +1.16 V, and an irreversible reduction, E pr = -1.6 V, were observed versus ferrocene (Fc (+/0)). At -40 degrees C, a state was observed with spectroscopic properties characteristic of a metal-to-ligand charge-transfer excited state, tau = 25 ns. This same compound was found to photoinject electrons into TiO 2 with a quantum yield Phi = 0.3 +/- 0.2 for 532.5 or 417 nm light excitation in a 0.1 M LiClO 4/acetonitrile electrolyte. In regenerative solar cells, a sustained photocurrent was observed with a maximum incident photon-to-current efficiency of 0.4. The photocurrent action and absorptance spectra were in good agreement, consistent with injection from a single excited state.     

Interfacial charge-transfer switch: ruthenium-dppz compounds anchored to nanocrystalline TiO2

The compound Ru(bpy)2(dppz-R)(PF6)2, where bpy is 2,2'-bipyridine and dppz-R is 11-(diethoxyphosphorylmethyl)dipyrido[3,2-a:2',3'-c]phenazine, was prepared and anchored to mesoporous nanocrystalline (anatase) TiO2 thin films as a probe of the effects of interfacial water on excited-state charge transfer processes at semiconductor interfaces. In nitrogen-saturated fluid acetonitrile, the Ru(bpy)2(dppz-R)(PF6)2 compound was found to be highly photoluminescent. Water was found to quench the excited state by a mechanism adequately described by the Perrin model, from which the radius of quenching was abstracted, 75 +/- 2 A. The Ru(bpy)2(dppz-R)(PF6)2 compounds were found to bind to the TiO2 thin films in high surface coverages, 5 x 10(-8) mol cm(-2). When these films were immersed in acetonitrile, long-lived excited states (tau = 825 ns) that were quenched by the addition of water were observed. About 30% of the excited states could not be quenched by water. Efficient electron injection, phi(inj) = 0.8, was observed after light excitation of Ru(bpy)2(dppz-R)/TiO2 in a 0.1 M LiClO4/acetonitrile solution. The addition of large concentrations of water, >0.5 M, was found to decrease the injection yield to phi(inj) = 0.3.     

Diastereoselective Synthesis, Spectroscopy, and Electrochemistry of Ruthenium(II) Complexes of Substituted Pyrazolylpyridine Ligands

We report the synthesis of the hetero- and homoleptic ruthenium(II) complexes Ru(bpy)(2)L(2+), Ru(bpy)L(2)(2+) (bpy is 2,2'-bipyridine), and RuL(3)(2+) of six new bidentates L, the substituted pyrazolylpyridines 1-6 (1-substituted-3-(2-pyridinyl)-4,5,6,7-tetrahydroindazoles with substituents R = H, CH(3), Ph, or C(6)H(4)-4"-COOX where X = H, CH(3), or C(2)H(5)). These were fully characterized by (1)H- and (13)C-NMR spectroscopy and elemental analysis. The UV-visible spectra and redox properties of the complexes, some in the ruthenium(III) and reduced bipyridine oxidation states, are also discussed. The substituents R played a role in determining the stereochemistry of the Ru(bpy)L(2)(2+) and RuL(3)(2+) products. The reaction of Ru(DMSO)(4)Cl(2) with 3 equiv of L bearing aromatic substituents gave only meridional RuL(3)(2+) isomers. The one-step reaction of Ru(bpy)Cl(3).H(2)O with 2 equiv of L provided a mixture of the three possible Ru(bpy)L(2)(2+) isomers, from which one symmetric isomer (labeled beta) was isolated pure. A trans arrangement of the pyrazole groups was deduced by (1)H-NMR and confirmed by X-ray crystallography for one such stereomer (beta-[Ru(bpy)(5)(2)](PF(6))(2), R = C(6)H(4)-4"-COOC(2)H(5)). In contrast, Ru(DMSO)(4)Cl(2) reacted with 2 equiv of L and then 1 equiv of bpy to selectively form the other symmetric isomer (labeled alpha) where the pyridine groups of L are trans. Crystal data for beta-[Ru(bpy)(5)(2)](PF(6))(2) (C(52)H(50)N(8)O(4)F(12)P(2)Ru) with Mo Kalpha (lambda = 0.710 73 ?) radiation at 295 K: a = 28.442(13) ?, b = 18.469(15) ?, c = 23.785(9) ?, beta = 116.76(0) degrees, monoclinic, space group C2/c, Z = 8. Fully anisotropic (except for H and disordered F atoms), full-matrix, weighted least-squares refinement on F(2) gave a weighted R on F(2) of 0.2573 corresponding to R on F of 0.1031 for data where F > 4sigma(F ).     

Coupling of metal-based light-harvesting antennas and electron-donor subunits: trinuclear ruthenium(II) complexes containing tetrathiafulvalene-substituted polypyridine ligands

Three new tetrathiafulvalene-substituted 2,2'-bipyridine ligands, cis-bpy-TTF(1), trans-bpy-TTF(1), and cis-bpy-TTF(2) have been prepared and characterized. X-ray analysis of trans-bpy-TTF(1) is also reported. Such ligands have been used to prepare two new trinuclear Ru(II) complexes, namely, [[(bpy)(2)Ru(micro-2,3-dpp)](2)Ru(bpy-TTF(1))](PF(6))(6) (9; bpy=2,2'-bipyridine; 2,3-dpp=2,3-bis(2'-pyridyl)pyrazine) and [[(bpy)(2)Ru(micro-2,3-dpp)](2)Ru(bpy-TTF(2))](PF(6))(6) (10). These compounds can be viewed as coupled antennas and charge-separation systems, in which the multichromophoric trinuclear metal subunits act as light-harvesting antennas and the tetrathiafulvalene electron donors can induce charge separation. The absorption spectra, redox behavior, and luminescence properties (both at room temperature in acetonitrile and at 77 K in a rigid matrix of butyronitrile) of the trinuclear metal complexes have been studied. For the sake of completeness, the mononuclear compounds [(bpy)(2)Ru(bpy-TTF(1))](PF(6))(2) (7) and [(bpy)(2)Ru(bpy-TTF(2))](PF(6))(2) (8) were also synthesized and studied. The properties of the tetrathiafulvalene-containing species were compared to those of the model compounds [Ru(bpy)(2)(4,4'-Mebpy)](2+) (4,4'-Mebpy=4,4'-dimethyl-2,2'-bipyridine) and [[(bpy)(2)Ru(micro-2,3-dpp)](2)Ru(bpy)](6+). The absorption spectra and redox behavior of all the new metal compounds can be interpreted by a multicomponent approach, in which specific absorption features and redox processes can be assigned to specific subunits of the structures. The luminescence properties of the complexes in rigid matrices at 77 K are very similar to those of the corresponding model compounds without TTF moieties, whereas the new species are nonluminescent, or exhibit very weak emissions relative to those of the model compounds in fluid solution at room temperature. Time-resolved transient absorption spectroscopy confirmed that the potentially luminescent MLCT states of 7-10 are significantly shorter lived than the corresponding states of the model species. Photoinduced electron-transfer processes from the TTF moieties to the (excited) MLCT chromophore(s) are held responsible for the quenching processes.     

Visible light induced photocleavage of DNA by a mixed-metal supramolecular complex: [[(bpy)(2)Ru(dpp)](2)RhCl2]5+

The mixed-metal supramolecular complex, [[(bpy)(2)Ru(dpp)](2)RhCl(2)](PF(6))(5) (bpy = 2,2'-bipyridine and dpp = 2,3-bis(2-pyridyl)pyrazine) coupling two ruthenium light absorbers (LAs) to a central rhodium, has been shown to photocleave DNA. This system possesses a lowest lying metal to metal charge transfer (MMCT) excited state in contrast to the metal to ligand charge transfer states (MLCT) of the bpm and Ir analogues. The systems with an MLCT excited state do not photocleavage DNA. [[(bpy)(2)Ru(dpp)](2)RhCl(2)](PF(6))(5) is the first supramolecular system shown to cleave DNA. It functions through an excited state previously unexplored for this reactivity, a Ru --> Rh MMCT excited state. This system functions when irradiated with low energy visible light with or without molecular oxygen.     

Picosecond isomerization in photochromic ruthenium-dimethyl sulfoxide complexes

The complexes [Ru(tpy)(bpy)(dmso)](OSO(2)CF(3))(2) and trans-[Ru(tpy)(pic)(dmso)](PF(6)) (tpy is 2,2':6',2' '-terpyridine, bpy is 2,2'-bipyridine, pic is 2-pyridinecarboxylate, and dmso is dimethyl sulfoxide) were investigated by picosecond transient absorption spectroscopy in order to monitor excited-state intramolecular S-->O isomerization of the bound dmso ligand. For [Ru(tpy)(bpy)(dmso)](2+), global analysis of the spectra reveals changes that are fit by a biexponential decay with time constants of 2.4 +/- 0.2 and 36 +/- 0.2 ps. The first time constant is assigned to relaxation of the S-bonded (3)MLCT excited state. The second time constant represents both excited-state relaxation to ground state and excited-state isomerization to form O-[Ru(tpy)(bpy)(dmso)](2+). In conjunction with the S-->O isomerization quantum yield (Phi(S)(-->)(O) = 0.024), isomerization of [Ru(tpy)(bpy)(dmso)](2+) occurs with a time constant of 1.5 ns. For trans-[Ru(tpy)(pic)(dmso)](+), global analysis of the transient spectra reveals time constants of 3.6 +/- 0.2 and 118 +/- 2 ps associated with these two processes. In conjunction with the S-->O isomerization quantum yield (Phi(S)(-->)(O) = 0.25), isomerization of trans-[Ru(tpy)(pic)(dmso)](+) occurs with a time constant of 480 ps. In both cases, the thermally relaxed excited states are assigned as terpyridine-localized (3)MLCT states. Electronic state diagrams are compiled employing these data as well as electrochemical, absorption, and emission data to describe the reactivity of these complexes. The data illustrate that rapid bond-breaking and bond-making reactions can occur from (3)MLCT excited states formed from visible light irradiation.     

Mono- and dinuclear ruthenium(II) 1,6,7,12-tetraazaperylene complexes

We report the synthesis of free 1,6,7,12-tetraazaperylene (tape). Tape was obtained from 1,1'-bis-2,7-naphthyridine by potassium promoted cyclization followed by oxidation with air. Mono- and dinuclear ruthenium(II) 1,6,7,12-tetraazaperylene complexes of the general formulas [Ru(L-L)(2)(tape)](PF(6))(2), [1](PF(6))(2)-[5](PF(6))(2), and [{Ru(L-L)(2)}(2)(μ-tape)](PF(6))(4), [6](PF(6))(4)-[10](PF(6))(4), with{L-L = phen, bpy, dmbpy (4,4'-dimethyl-2,2'-bipyridine), dtbbpy (4,4'-ditertbutyl-2,2'-bipyridine) and tmbpy (4,4'5,5'-tetramethyl-2,2'-bipyridine)}, respectively, were synthesized. The X-ray structures of tape·2CHCl(3) and the mononuclear complexes [Ru(bpy)(2)(tape)](PF(6))(2)·0.5CH(3)CN·0.5toluene, [Ru(dmbpy)(2)(tape)](PF(6))(2)·2toluene and [Ru(dtbbpy)(2)(tape)](PF(6))(2)·3acetone·0.5H(2)O were solved. The UV-vis absorption spectra and the electrochemical behavior of the ruthenium(ii) tape complexes were explored and compared with the data of the analogous dibenzoeilatin (dbneil), 2,2'-bipyrimidine (bpym) and tetrapyrido[3,2-a:2',3'-c:3',2'-h:2',3'-j]phenazin (tpphz) species.     

Flash-quench technique employed to study the one-electron reduction of triiodide in acetonitrile: evidence for a diiodide reaction product

The one-electron reduction of triiodide (I(3)(-)) by a reduced ruthenium polypyridyl compound was studied in an acetonitrile solution with the flash-quench technique. Reductive quenching of the metal-to-ligand charge-transfer excited state of [Ru(II)(deeb)(3)](2+) by iodide generated the reduced ruthenium compound [Ru(II)(deeb(-))(deeb)(2)](+) and diiodide (I(2)(?-)). The subsequent reaction of [Ru(II)(deeb(-))(deeb)(2)](+) with I(3)(-) indicated that I(2)(?-) was a product that appeared with a second-order rate constant of (5.1 ± 0.2) × 10(9) M(-1) s(-1). After correction for diffusion and some assumptions, Marcus theory predicted a formal potential of -0.58 V (vs SCE) for the one-electron reduction of I(3)(-). The relevance of this reaction to solar energy conversion is discussed.     

Surprising photochemical reactivity and visible light-driven energy transfer in heterodimetallic complexes

The bis(bidentate) phosphine cis,trans,cis-1,2,3,4-tetrakis(diphenylphosphino)cyclobutane (dppcb) has been used for the synthesis of a series of novel heterodimetallic complexes starting from [Ru(bpy)(2)(dppcb)]X(2) (1; X = PF(6), SbF(6)), so-called dyads, showing surprising photochemical reactivity. They consist of [Ru(bpy)(2)](2+)"antenna" sites absorbing light combined with reactive square-planar metal centres. Thus, irradiating [Ru(bpy)(2)(dppcb)MCl(2)]X(2) (M = Pt, 2; Pd, 3; X = PF(6), SbF(6)) dissolved in CH(3)CN with visible light, produces the unique heterodimetallic compounds [Ru(bpy)(CH(3)CN)(2)(dppcb)MCl(2)]X(2) (M = Pt, 7; Pd, 8; X = PF(6), SbF(6)). In an analogous reaction the separable diastereoisomers (ΔΛ/ΛΔ)- and (ΔΔ/ΛΛ)-[Ru(bpy)(2)(dppcb)Os(bpy)(2)](PF(6))(4) (5/6) lead to [Ru(bpy)(CH(3)CN)(2)(dppcb)Os(bpy)(2)](PF(6))(4) (9), where only the RuP(2)N(4) moiety of 5/6 is photochemically reactive. By contrast, in the case of [Ru(bpy)(2)(dppcb)NiCl(2)]X(2) (4; X = PF(6), SbF(6)) no clean photoreaction is observed. Interestingly, this difference in photochemical behaviour is completely in line with the related photophysical parameters, where 2, 3, and 5/6, but not 4, show long-lived excited states at ambient temperature necessary for this type of photoreaction. Furthermore, the photochemical as well as the photophysical properties of 2-4 are also in accordance with their single crystal X-ray structures presented in this work. It seems likely that differences in "steric pressure" play a major role for these properties. The unique complexes 7-9 are also fully characterized by single-crystal X-ray structure analyses, clearly showing that the stretching vibration modes of the ligand CH(3)CN, present only in 7-9, cannot be directly influenced by "steric pressure". This has dramatic consequences for their photophysical parameters. The trans-[Ru(bpy)(CH(3)CN)(2)](2+) chromophore of 9 acts as efficient "antenna" for visible light-driven energy transfer to the Os-centred "trap" site, resulting in k(en) ≥ 2 × 10(9) s(-1) for the energy transfer. Since electron transfer is made possible by the use of this intervening energy transfer, in dyads like 2-4 highly reactive M(0) species (M = Pt, Pd, Ni) could be generated. These species are not stable in water and M(II) hydride intermediates are usually formed, further reacting with H(+) to give H(2). Thus, derivatives of 3, namely [M(bpy)(2)(dppcb)Pd(bpy)](PF(6))(4) (M = Os, Ru) dissolved in 1:1 (v/v) H(2)O-CH(3)CN produce H(2) during photolysis with visible light.     

Enhancement of metal-metal coupling at a considerable distance by using 4-pyridinealdazine as a bridging ligand in polynuclear complexes of rhenium and ruthenium

Novel polynuclear complexes of rhenium and ruthenium containing PCA (PCA = 4-pyridinecarboxaldehyde azine or 4-pyridinealdazine or 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene) as a bridging ligand have been synthesized as PF(6-) salts and characterized by spectroscopic, electrochemical, and photophysical techniques. The precursor mononuclear complex, of formula [Re(Me(2)bpy)(CO)(3)(PCA)](+) (Me(2)bpy = 4,4'-dimethyl-2,2'-bipyridine), does not emit at room temperature in CH(3)CN, and the transient spectrum found by flash photolysis at lambda(exc) = 355 nm can be assigned to a MLCT (metal-to-ligand charge transfer) excited state [(Me(2)bpy)(CO)(3)Re(II)(PCA(-))](+), with lambda(max) = 460 nm and tau < 10 ns. The spectral properties of the related complexes [[Re(Me(2)bpy)(CO)(3)}(2)(PCA)](2+), [Re(CO)(3)(PCA)(2)Cl], and [Re(CO)(3)Cl](3)(PCA)(4) confirm the existence of this low-energy MLCT state. The dinuclear complex, of formula [(Me(2)bpy)(CO)(3)Re(I)(PCA)Ru(II)(NH(3))(5)](3+), presents an intense absorption in the visible spectrum that can be assigned to a MLCT d(pi)(Ru) --> pi(PCA); in CH(3)CN, the value of lambda (max) = 560 nm is intermediate between those determined for [Ru(NH(3))(5)(PCA)](2+) (lambda(max) = 536 nm) and [(NH(3))(5)Ru(PCA)Ru(NH(3))(5)](4+) (lambda(max) = 574 nm), indicating a significant decrease in the energy of the pi-orbital of PCA. The mixed-valent species, of formula [(Me(2)bpy)(CO)(3)Re(I)(PCA)Ru(III)(NH(3))(5)](4+), was obtained in CH(3)CN solution, by bromine oxidation or by controlled-potential electrolysis at 0.8 V in a OTTLE cell of the [Re(I),Ru(II)] precursor; the band at lambda(max) = 560 nm disappears completely, and a new band appears at lambda(max) = 483 nm, assignable to a MMCT band (metal-to-metal charge transfer) Re(I) --> Ru(III). By using the Marcus-Hush formalism, both the electronic coupling (H(AB)) and the reorganization energy (lambda) for the metal-to-metal intramolecular electron transfer have been calculated. Despite the considerable distance between both metal centers (approximately 15.0 Angstroms), there is a moderate coupling that, together with the comproportionation constant of the mixed-valent species [(NH(3))(5)Ru(PCA)Ru(NH(3))(5)](5+) (K(c) approximately 10(2), in CH(3)CN), puts into evidence an unusual enhancement of the metal-metal coupling in the bridged PCA complexes. This effect can be accounted for by the large extent of "metal-ligand interface", as shown by DFT calculations on free PCA. Moreover, lambda is lower than the driving force -DeltaG degrees for the recombination charge reaction [Re(II),Ru(II)] --> [Re(I),Ru(III)] that follows light excitation of the mixed-valent species. It is then predicted that this reverse reaction falls in the Marcus inverted region, making the heterodinuclear [Re(I),Ru(III)] complex a promising model for controlling the efficiency of charge-separation processes.     

Design aspects for the development of mixed-metal supramolecular complexes capable of visible light induced photocleavage of DNA

Mixed-metal supramolecular complexes that couple ruthenium or osmium based light absorbers to a central rhodium(III) core have been designed which photocleave DNA upon irradiation with visible light. The complexes [[(bpy)(2)Ru(dpp)](2)RhCl(2)](PF(6))(5), [[(bpy)(2)Os(dpp)](2)RhCl(2)](PF(6))(5), and [[(tpy)RuCl(dpp)](2)RhCl(2)](PF(6))(3), where bpy = 2,2'-bipyridine, tpy = 2,2':6',2' '-terpyridine, and dpp = 2,3-bis(2-pyridyl)pyrazine, all exhibit intense metal to ligand charge transfer (MLCT) based transitions in the visible but possess lower lying metal to metal charge transfer (MMCT) excited states. These supramolecular complexes with low lying MMCT states photocleave DNA when excited into their intense MLCT transitions. Structurally similar complexes without this low lying MMCT state do not exhibit DNA photocleavage, establishing the role of this MMCT state in the DNA photocleavage event. Design considerations necessary to produce functional DNA photocleavage agents are presented herein.     

Characterization of the Lowest Excited States of [Rh(bpy-h(8))(n)(bpy-d(8))(3-n)](3+) by Highly Resolved Emission and Excitation Spectra

Highly resolved emission, excitation, and resonantly line-narrowed spectra, as well as emission decay properties of [Rh(bpy-h(8))(n)(bpy-d(8))(3-n)](3+) (n = 0, 2, 3; bpy = 2,2'-bipyridine) doped into [Zn(bpy-h(8))(3)](ClO(4))(2) are presented for the first time. [Rh(bpy-h(8))(3)](3+) and [Rh(bpy-d(8))(3)](3+) exhibit one low-lying triplet T(1) at 22 757 +/- 1 and 22 818 +/- 1 cm(-1), respectively (blue shift 61 cm(-1)), while [Rh(bpy-h(8))(2)(bpy-d(8))](3+) has two low-lying triplets at 22 757 +/- 1 and 22 818 +/- 1 cm(-1). The well-resolved vibrational satellite structures show, that the equilibrium positions of the triplet and the singlet ground S(0) state are not very different and that the force constants in T(1) are mostly slightly smaller than in S(0). Moreover, the vibrational satellite structure is strongly dominated by vibrational ligand modes, which demonstrates the pipi character of the corresponding transition. However, the occurrence of several very weak vibrational modes of metal-ligand character displays a small influence of the metal ion. This is supported by the emission decay behavior. [Rh(bpy-h(8))(2)(bpy-d(8))](3+) exhibits an emission which is clearly assignable to the protonated ligand(s), even when the deuterated ligand is selectively excited. Obviously, an efficient intramolecular energy transfer from the deuterated to the protonated ligand(s) occurs, presumably mediated by the small Rh(3+) d-admixture. A so-called "dual emission" is not observed. Moreover, a series of spectroscopic properties of the lowest excited state of [Rh(bpy)(3)](3+) (energies of electronic origins, emission decay times, zero-field splittings, structures of vibrational satellites, etc.) is compared to properties of bpy, [Pt(bpy)(2)](2+), [Ru(bpy)(3)](2+), and [Os(bpy)(3)](2+). This comparison displays in a systematic way the increasing importance of the metal d and/or MLCT character for the lowest excited states and thus provides guidelines for an experimentally based classification. In particular, the lowest excited states of [Rh(bpy)(3)](3+) may be ascribed as being mainly of (3)pipi character confined to one ligand in contrast to the situation found for [Ru(bpy)(3)](2+) where these states are covalently delocalized over the whole complex.     

Ruthenium(II)-polyazine light absorbers bridged to reactive cis-dichlororhodium(III) centers in a bimetallic molecular architecture

Bimetallic complexes of the form [(bpy)(2)Ru(BL)RhCl(2)(phen)](PF(6))(3), where bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, and BL = 2,3-bis(2-pyridyl)pyrazine (dpp) or 2,2'-bipyrimidine (bpm), were synthesized, characterized, and compared to the [{(bpy)(2)Ru(BL)}(2)RhCl(2)](PF(6))(5) trimetallic analogues. The new complexes were synthesized via the building block method, exploiting the known coordination chemistry of Rh(III) polyazine complexes. In contrast to [{(bpy)(2)Ru(dpp)}(2)RhCl(2)](PF(6))(5) and [{(bpy)(2)Ru(bpm)}(2)RhCl(2)](PF(6))(5), [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) and [(bpy)(2)Ru(bpm)RhCl(2)(phen)](PF(6))(3) have a single visible light absorber subunit coupled to the cis-Rh(III)Cl(2) moiety, an unexplored molecular architecture. The electrochemistry of [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) showed a reversible oxidation at 1.61 V (vs Ag/AgCl) (Ru(III/II)), quasi-reversible reductions at -0.39 V, -0.74, and -0.98 V. The first two reductive couples corresponded to two electrons, consistent with Rh reduction. The electrochemistry of [(bpy)(2)Ru(bpm)RhCl(2)(phen)](PF(6))(3) exhibited a reversible oxidation at 1.76 V (Ru(III/II)). A reversible reduction at -0.14 V (bpm(0/-)), and quasi-reversible reductions at -0.77 and -0.91 V each corresponded to a one electron process, bpm(0/-), Rh(III/II), and Rh(II/I). The dpp bridged bimetallic and trimetallic display Ru(dpi)-->dpp(pi*) metal-to-ligand charge transfer (MLCT) transitions at 509 nm (14,700 M(-1) cm(-1)) and 518 nm (26,100 M(-1) cm(-1)), respectively. The bpm bridged bimetallic and trimetallic display Ru(dpi)-->bpm(pi*) charge transfer (CT) transitions at 581 nm (4,000 M(-1) cm(-1)) and 594 nm (9,900 M(-1) cm(-1)), respectively. The heteronuclear complexes [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) and [{(bpy)(2)Ru(dpp)}(2)RhCl(2)](PF(6))(5) had (3)MLCT emissions that are Ru(dpi)-->dpp(pi*) CT in nature but were red-shifted and lower intensity than [(bpy)(2)Ru(dpp)Ru(bpy)(2)](PF(6))(4). The lifetimes of the (3)MLCT state of [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) at room temperature (30 ns) was shorter than [(bpy)(2)Ru(dpp)Ru(bpy)(2)](PF(6))(4), consistent with favorable electron transfer to Rh(III) to generate a metal-to-metal charge-transfer ((3)MMCT) state. The reported synthetic methods provide means to a new molecular architecture coupling a single Ru light absorber to the Rh(III) center while retaining the interesting cis-Rh(III)Cl(2) moiety.