Thermal properties and structures of chlorocadmate, bromocadmate, and bromochlorocadmate glasses

Glass transition temperatures (T_g), crystallization temperatures (T_x), and ¹¹³Cd magic-angle spinning (MAS) NMR spectra of the chlorocadmate, bromocadmate, and bromochlorocadmate glasses and the CdCl₂, CdBrCl, and CdBr₂ crystals have been measured. The T_g and T_x, and thermal stabilities (T_x−T_g) decreased with increasing Br-content. No enhancement of (T_x−T_g) of bromochlorocadmate glasses by anion-mixing was observed. The CdCl₂ and CdBr₂ crystals gave the isotropic chemical shifts of 183 and −24 ppm, which are assigned to the CdCl₆ and CdBr₆ octahedra, respectively. The isotropic chemical shifts of CdBrCl crystal (186, 166, 135, 101, 63, 25 and −21 ppm) were assigned to CdBr_nCl_(6−n) (n=0-6) octahedra, respectively. It was found that the Br and Cl atoms in CdBrCl randomly occupy chlorine sites in the CdCl₂ structure. The ¹¹³Cd MAS NMR spectra revealed that the chlorocadmate, bromocadmate, and bromochlorocadmate glasses are composed of the CdCl₆, CdBr₆ and CdBr_nCl_(6−n) octahedra (n=0-6), respectively, and that the Cd²⁺ in all the bromochlorocadmate glasses was more preferentially bonded to Br⁻ than Cl⁻. The relationship between the thermal properties and the anion coordination environments around Cd²⁺ in these glasses is discussed.     

Fluorophosphate glasses containing manganese

New fluorophosphate glasses based on MnF₂, NaPO₃ and MF_n (M=Zn²⁺, Sr²⁺, Mg²⁺, Ba²⁺, Li⁺, Na⁺ and K⁺) have been synthesised and characterized. Large vitreous areas were observed. Samples of 4 mm in thickness have been obtained. These glasses are easy to prepare and stable in ambient air. Depending on the composition and the nature of the M cation, glass transition temperature, T_g, lies between 230 and 314 °C, crystallisation temperature, T_x is between 320 and 475 °C. These glasses are pink coloured, and infrared transmission extends up to 4.5 μm with extrinsic OH⁻ absorption band at 3200 cm⁻¹ and other bands around 2200 and 1600 cm⁻¹ that relate to PO₄ tetrahedron vibration. Other physical properties including density, microhardness, Young modulus, thermal expansion and refractive index were investigated and correlated to composition.     

Effect of iron doping on the characterization and transport properties of calcium phosphate glassy semiconductors

X-ray diffraction (XRD), differential scanning calorimeter (DSC), density (d) and dc conductivity (σ) of the glasses in Fe₂O₃-CaO-P₂O₅ system were reported. The dc conductivity in the temperature range 303-453 K was measured. The overall features of these XRD curves confirm the amorphous nature of the present samples. The density of glasses increases from 2.750 to 2.892 g/cm³ with increasing Fe₂O₃ content as a result of a strengthening of cross-linking within glass network. The glass temperature values (T_g) of the present glasses were larger than those of tellurite glasses. This indicates a higher thermal stability of the glass in the present system. The glasses had conductivities ranging from 10⁻⁹ to 10⁻⁵ Sm⁻¹ at temperatures from 303 to 453 K. Electrical conduction of the glasses was confirmed to be due to non-adiabatic small polaron hopping and the conduction was primarily determined by hopping carrier mobility.     

DC conductivity of silver vanadium tellurite glasses

The mixed electronic-ionic conduction in 0.5[xAg₂O-(1−x)V₂O₅]-0.5TeO₂ glasses with x=0.1-0.8 has been investigated over a wide temperature range (70-425 K). The mechanism of dc conductivity changes from predominantly electronic to ionic within the 30?mol% Ag₂O?40 range; it is correlated with the underlying change in glass structure. The temperature dependence of electronic conductivity has been analyzed quantitatively to determine the applicability of various models of conduction in amorphous semiconducting glasses. At high temperature, T>θ_D/2 (where θ_D is the Debye temperature) the electronic dc conductivity is due to non-adiabatic small polaron hopping of electrons for 0.1?x?0.5. The density of states at Fermi level is estimated to be N(E_F)≈10¹⁹-10²⁰ eV⁻¹ cm⁻³. The carrier density is of the order of 10¹⁹ cm⁻³, with mobility ≈2.3×10⁻⁷-8.6×10⁻⁹ cm² V⁻¹ s⁻¹ at 300 K. The electronic dc conductivity within the whole range of temperature is best described in terms of Triberis-Friedman percolation model. For 0.6?x?0.8, the predominantly ionic dc conductivity is described well by the Anderson-Stuart model.     

Influence of B2O3 to the inhomogeneous broadening and spectroscopic properties of Er/Yb codoped fluorophosphate glasses

In a three-components fluorophosphate glass system, the introduction of H₃BO₃ brings some valuable influence to the spectroscopic and thermal properties of the glasses. With H₃BO₃ increases from 2 to 20 mol%, Ω₆, S_ed4I13/2, FWHM, T_g and fluorescence lifetime change from 3.21×10⁻²⁰ cm², 1.77×10⁻²⁰ cm², 45 nm, 480 °C and 8.8 ms to 4.66×10⁻²⁰ cm², 2.11×10⁻²⁰ cm², 50 nm, 541 °C and 7.4 ms, respectively. σ_abs, σ_emi, FWHM×τ_f×σ_emi has a maximum when H₃BO₃ is 11 mol%. T_g and T_x−T_g increases with H₃BO₃ introduction. Results showed that in fluorophosphate glasses, proper amount of B₂O₃ can be used as a modifier to suppress upconversion and improve spectroscopic properties, broadband property and crystallization stability of the glasses while keeps the fluorescence lifetime relatively high.     

Elastic, thermal and structural properties of platinum

The thermal equation of state (EOS) for platinum has been calculated to 300 GPa and 3000 K using ab initio molecular dynamics employing the local density approximation (LDA) and the projector augmented-wave methods (PAW). Direct ab initio molecular dynamics avoids the simplifying assumptions inherent in empirical treatments of thermoelasticity. A third-order Birch-Murnaghan equation EOS fitted to the 300 K data yielded an isothermal bulk modulus of B_T0=290.8 GPa and a pressure derivative of B_T′=5.11, which are in better agreement with the measured values than those obtained by previous calculations. The high-temperature data were fitted to a thermal pressure EOS and a Mie-Grüneisen-Debye EOS. The resulting calculated thermal expansion coefficient, α₀, temperature derivative of the isothermal bulk modulus, (∂B_T/∂T)_V, and second temperature derivative of the pressure, (∂²P/∂T²)_V, were 1.94×10⁻⁵ K⁻¹, −0.0038 GPa K⁻¹, and 1.7×10⁻⁷ GPa² K⁻², respectively. A fit to the Mie-Grüneisen-Debye EOS yielded values for the Grüneisen parameter, γ₀, and its volume dependence parameter, q, of 2.18 and 1.75, respectively. An analysis of our data revealed a strong volume dependence of the thermal pressure of platinum. We also present a qualitative analysis of the effects of intrinsic anharmonicity from the calculated Grüneisen parameter at high temperatures.     

Electron correlation in two-dimensional systems: CHNC approach to finite-temperature and spin-polarization effects

Applying the classical-map hypernetted-chain method (CHNC) developed recently by Dharma-wardana and Perrot, we have studied the temperature and spin-polarization effects on electron correlation in the uniform quantum two-dimensional gas (2DEG) over a wide range of temperature T and spin-polarization ζ. The quantum fluid at the temperature T is mapped to a classical fluid at the temperature T_cf given by T_cf²=T²+T_q², where the quantum temperature T_q is determined by comparing the calculated correlation energy to that of Monte Carlo results for the fully spin-polarized quantum system at zero temperature. By the iterative solution of the modified HNC equation and the Ornstein-Zernike equation, we have obtained the pair distribution function (PDF) and correlation energy for the two-component classical 2DEG with a classical fluid temperature T_cf. The anti-parallel bridge function B₁₂(r) appearing in the modified HNC equation is determined by using the Monte Carlo correlation energy at T=0 or STLS (Singwi-Tosi-Land-Sjölander) result at T>0 and the numerical solution to the Percus-Yevick (PY) equation for the system of hard disks. By calculating the Pauli potential, the bridge function, PDFs, structure factors and correlation energy, we have shown that in some cases, the properties of the uniform quantum 2DEG depend remarkably on the temperature and spin-polarization.     

Study of the magnetization and transport properties of the La(2+x)/3Sr(1−x)/3Mn1−xCrxO3 (0≤x≤0.2) system

The samples with the Mn³⁺/Mn⁴⁺ ratio fixed at 2:1 La_(2+x)/3Sr_(1−x)/3Mn_1−xCr_xO₃ (0≤x≤0.20) have been prepared. The magnetic, electrical transport, and magnetoresistance properties have been investigated. Remarkable transport and colossal magnetoresistance (CMR) effect, as well as cluster glass (CG) behaviors have been clearly observed in the samples studied. It was found that the Curie temperature T_c and insulator−metal transition temperature T_p1 are strongly affected by Cr substitution. The experiment observations are discussed by taking into account the variety of tolerance factors t; the effects of A-site radius 〈r_A〉 and the A-site mismatch effect (σ²).     

Magnetic properties for the Cu2MnSnSe4 and Cu2FeSnSe4 compounds

Magnetic susceptibility χ measurements in the range from 2 to 300 K were carried out on samples of the Cu₂FeSnSe₄ and Cu₂MnSnSe₄ compounds. It was found that Cu₂FeSnSe₄ was antiferromagnetic showing ideal Curie-Weiss behavior with a Néel temperature T_N of about 19 K and Curie-Weiss temperature θ=−200 K, while for Cu₂MnSnSe₄ the behavior was spin-glass with a freezing temperature T_f of about 22 K and Curie-Weiss temperature θ=−25 K. The spin-glass order parameter q(T), determined from the susceptibility data, was found to be in agreement with the prediction of conventional spin-glass theory.     

Electrical properties of KTiOPO4 single crystal in the temperature range from −100 °C to 100 °C

The electrical property of a KTiOPO₄ single crystal was studied by means of a dielectric spectroscopy method in the temperature range from −100 to 100 °C. Dielectric dispersion began at a temperature, T_S=−80 °C. It is believed that this dielectric dispersion is related to the ionic hopping conduction, which arises mainly from the jumping of K⁺ ions. The activation energy concerned with hopping conduction is E_a∼0.20 eV above T_S. T_S=−80 °C can be the minimum temperature for the hopping K⁺ ion.     

Synthesis and physical characterization of superconductivity-magnetism crossover compound RuSr2EuCeCu2O10−δ

We carefully studied the nonsuperconducting sample of the magneto-superconducting RuSr₂(Eu_1−xCe_x)Cu₂O_10−δ series with composition RuSr₂EuCeCu₂O_10−δ. This compound seems to exhibit a complex magnetic state as revealed by host of techniques like resistivity, thermopower, magnetic susceptibility, and MR measurements. The studied compound exhibited ferromagnetic like M(H) loops at 5, 20, and 50 K, and semiconductor like electrical conduction down to 5 K, with −MR^7 T of up to 4% at low temperatures. The −MR^7 T decreases fast above 150 K and monotonically becomes close to zero above say 230 K. Below, 150 K −MR^7 T decreases to around 3% monotonically down to 75 K, with further increase to 4% at around 30 K and lastly having a slight decrease below this temperature. The thermopower S(T) behavior closely followed the −MR^7 T steps in terms of d(S/T)/dT slopes. Further, both MR^7 T steps and d(S/T)/dT slopes are found in close vicinity to various magnetic ordering temperatures (T_mag) of this compound.     

Effect of Bi2O3 on EPR, optical transmission and DC conductivity of vanadyl doped alkali bismuth borate glasses

Glasses with composition xBi₂O₃·(30−x)M₂O·70B₂O₃ (M=Li, Na) containing 2 mol% V₂O₅ have been prepared over the range 0≤x≤15 (x is in mol%). The electron paramagnetic resonance spectra of VO²⁺ of these glasses have been recorded in the X-band (≈9.3 GHz) at room temperature (RT≈300 K). Spin Hamiltonian parameters, g_∥, g_⊥, A_∥, A_⊥, dipolar hyperfine coupling parameter, P, and Fermi contact interaction parameter, K, have been calculated. The molecular orbital coefficients, α² and γ², have been calculated by recording the optical transmission spectra. In xBi₂O₃·(30−x)Li₂O·70B₂O₃ glasses there is decrease in the tetragonality of the V⁴⁺O₆ complex for x up to 6 mol% whereas for x≥6 mol%, tetragonality increases. In xBi₂O₃·(30−x)Na₂O·70B₂O₃ glasses there is increase in the tetragonality of the V⁴⁺O₆ complex with increasing x. The 3d_xy orbit expands with increase in Bi₂O₃:M₂O ratio. Values of the theoretical optical basicity, Λ_th, have also been reported. The DC conductivity increases with increase in temperature. The order of conductivity is 10⁻⁵ ohm⁻¹ m⁻¹ at low temperature and 10⁻³ ohm⁻¹ m⁻¹ at high temperature. The DC conductivity decreases and the activation energy increases with increase in Bi₂O₃:M₂O ratio.     

Electron hopping mechanism in hematite (α-Fe2O3)

The frequency dependence of the real (?′) and imaginary (?″) parts of the dielectric constant of polycrystalline hematite (α-Fe₂O₃) has been investigated in the frequency range 0-100 kHz and the temperature range 190-350 K, in order to reveal experimentally the electron hopping mechanism that takes place during the Morin transition of spin-flip process. The dielectric behaviour is described well by the Debye-type relaxation (α-dispersion) in the temperature regions T<233 K and T>338 K. In the intermediate temperature range 233 K<T<338 K a charge carrier mechanism takes place (electron jump from the O²⁻ ion into one of the magnetic ions Fe³⁺) which gives rise to the low frequency conductivity and to the Ω-dispersion. The temperature dependence of relaxation time (τ) in the −ln τ vs 10³/T plot shows two linear regions. In the first, T<238 K, τ increases with increasing T implying a negative activation energy −0.01 eV, and in the second region T>318 K τ decreases as the temperature increases implying a positive activation energy 0.12 eV. The total reorganization energy (0.12-0.01) 0.11 eV is in agreement with the adiabatic activation energy 0.11 eV given by an ab initio model in the literature. The temperature dependence of the phase shift in the frequencies 1, 5, 10 kHz applied shows clearly an average Morin temperature T_Mo=284±1 K that is higher than the value of 263 K corresponding to a single crystal due to the size and shape of material grains.     

Decoupling of the order-disorder and displacive contributions to the phase transition in NH4H(ClH2CCOO)2

The effects of hydrostatic pressure and substitution of Rb⁺for the ammonium cations on the ferroelectric phase transition temperature in NH₄H(ClH₂CCOO)₂ have been studied by electric permittivity measurements. The transition temperature (T_c) decreases with increasing pressure up to 800 MPa and the pressure coefficient dT_c/dp=−1.4×10⁻² [K/MPa] has been experimentally determined. The substitution of Rb⁺ for the ammonium cations has been shown to considerably lower the ferroelectric phase transition temperature T_c. In mixed crystals, additional electric permittivity anomaly has been clearly evidenced. The results are discussed assuming a model, which combines polarizability effects, related to the heavy ion units, with the pseudo-spin tunnelling.     

Optical properties of samarium doped zinc-phosphate glasses

Samarium doped zinc-phosphate glasses having composition Sm₂O_{3 (x)}ZnO_(60−x) P₂O_{5 (40)} (where x=0.1-0.5 mol%) were prepared by melt quenching method. The density of these glasses was measured by Archimedes method; the corresponding molar volumes have also been calculated. The values of density range from 3.34 to 3.87 gm/cm³ and those of molar volume range from 27.62 to 31.80 cm⁻³. The optical absorbance studies were carried out on these glasses to measure their energy band gaps. The absorption spectra of these glasses were recorded in UV-visible region. No sharp edges were found in the optical spectra, which verifies the amorphous nature of these glasses. The optical band gap energies for these glasses were found to be in the range of 2.89-4.20 eV. The refractive index and polarizability of oxide ion have been calculated by using Lorentz-Lorentz relations. The values of refractive index range from 2.13 to 2.42 and those of polarizability of oxide ion range from 6.51×10⁻²⁴ to 7.80×10⁻²⁴ cm³.     

New alkali antimonate glasses

Glass formation has been investigated in ternary systems Sb₂O₃-PbO-M₂O in which M is alkali Li, Na and K and antimony oxide is the glass former. Alkali elements were introduced as carbonates. The size of the glass forming region is enlarged as alkali ionic radius increases. Binary Sb₂O₃-M₂O glasses were obtained: (100−x) Sb₂O₃-xLi₂O, (10<x<30), (100−x) Sb₂O₃-xNa₂O, (10<x<70), and (100−x) Sb₂O₃-xK₂O, (10<x<90). In ternary systems, PbO content could reach 60 mol%. Temperatures of glass transition, T_g, onset of crystallization, T_x, and maximum of crystallization, T_p, have been measured using differential scanning calorimetry. Depending on composition, glass transition temperature ranges from 240 to 330 °C. The incorporation of alkali oxide increases T_g while lead oxide has the reverse effect. Thermal stability range (T_x-T_g) was usually between 65 and 266 °C, while no crystallization exotherm was observed in some cases. Density and thermal expansion increases as lead concentration increases. Optical transmission has been measured. The UV cut-off depends on alkali content: samples are yellow and turn green for large K and Na content. These glasses have potential applications as low phonon energy glasses for infrared transmission or active devices.     

Site selection NMR study on electronic state in and near vortex core of YBa2Cu4O8

We report a site-selective ¹⁷O spin-lattice relaxation rate T₁⁻¹ in the vortex state of YBa₂Cu₄O₈. We found that T₁⁻¹ at the planar sites exhibits an unusual nonmonotonic NMR frequency dependence. Based on T₁⁻¹ in the vortex core region, we establish strong evidence that the local density of states within the vortex core is strongly reduced.     

The barrier height inhomogeneity in Al/p-Si Schottky barrier diodes with native insulator layer

The current-voltage (I-V) characteristics of Al/p-Si Schottky barrier diodes (SBDs) with native insulator layer were measured in the temperature range of 150-375 K. The estimated zero-bias barrier height Φ_B0 and the ideality factor n assuming thermionic emission (TE) theory show strong temperature dependence. Evaluation of the forward I-V data reveals an increase of zero-bias barrier height Φ_B0 but decrease of ideality factor n with increase in temperature. The conventional Richardson plot exhibits non-linearity below 250 K with the linear portion corresponding to activation energy of 0.41 eV and Richardson constant (A^*) value of 1.3 × 10⁻⁴ A cm⁻² K⁻² is determined from intercept at the ordinate of this experimental plot, which is much lower than the known value of 32 A cm² K² for holes in p-type Si. Such behavior is attributed to Schottky barrier inhomogene ties by assuming a Gaussian distribution of barrier heights (BHs) due to barrier height inhomogeneities that prevail at interface. Also, Φ_B0 versus q/2kT plot was drawn to obtain evidence of a Gaussian distribution of the BHs, and values of Φ_B0 = 1.055 eV and σ₀ = 0.13 V for the mean BH and zero-bias standard deviation have been obtained from this plot, respectively. Thus, the modified versus q/kT plot gives Φ_B0 and A^* as 1.050 eV and 40.08 A cm⁻² K⁻², respectively, without using the temperature coefficient of the barrier height. This value of the Richardson constant 40.03 A cm⁻² K⁻² is very close to the theoretical value of 32 A K⁻² cm⁻² for p-type Si. Hence, it has been concluded that the temperature dependence of the forward I-V characteristics of the Al/p-Si Schottky barrier diodes with native insulator layer can be successfully explained on the basis of TE mechanism with a Gaussian distribution of the barrier heights.     

Mixed alkali effect in boroarsenate glasses

We report, for the first time the study of mixed alkali effect (MAE) in boroarsenate glasses. Density, DSC, DC electrical conductivity and IR studies have been carried out for xK₂O-(40−x)Na₂O-50B₂O₃-10As₂O₃ glasses. The DC electrical conductivity was measured in the temperature range 100 °C to below the glass transition temperature. The strength of the MAE in T_g, DC electrical conductivity and activation energy has been determined. It is observed that the strength of MAE in DC electrical conductivity is less pronounced with increase in temperature. The results are explained by the structural model recently proposed by Swenson and coworkers, supporting molecular dynamic results. The IR studies show that the glass system contains BO₃ and BO₄ units in the disordered manner.     

Solid-state NMR study of bioactive binary borosilicate glasses

A series of binary borosilicate glasses prepared by the sol-gel method are shown to be bioactive. Tetraethyl orthosilicate (TEOS) and trimethylborate (TMB) in acidic medium are used to prepare xB₂O₃·(1−x)SiO₂ glass systems for x=0.045-0.167. The formation of a layer of apatite-like mineral on the glass surface becomes apparent after soaking in simulated body fluid for 48 h. We have measured the ¹¹B-¹¹B homonuclear second moments of the borosilicate glasses and inferred that no macroscopic phase separation occurred in our glasses. The ¹¹B chemical shift data also show that the formation of clustered boroxol rings is negligible in our glass system. Although the bioactivity of our borosilicate glasses is less than that of CaO-SiO₂ sol-gel glasses, these simple binary systems could be taken as reference glass systems for the search of new bioactive borosilicate glasses.