Use of radioactive indicators for studying the sorption behaviour of polyvalent cations in solution

The soprtion behaviour of Fe(III), Cr(III), Sc(III), Y(III) and U(VI) toward cationite KU-2 and silica gel under hydrolysis condition has been studied. The role of mononuclear and polynuclear hydroxo complexes in sorption is demonstrated and the mechanism of the sorption process is analyzed.     

Role of hydrolysis in the sorption isolation of radionuclides from solutions

The sorption of hydrolized iron(III) and plutonium(IV) species by silica gel has been studied. It is shown that both mononuclear and polynuclear hydroxo complexes of iron(III) and plutonium(IV) display an increased and specific sorption activity in respect to silica gel.     

Synthesis, structure, and physical properties for a series of monomeric iron(III) hydroxo complexes with varying hydrogen-bond networks

Mononuclear iron(III) complexes with terminal hydroxo ligands are proposed to be important species in several metalloproteins, but they have been difficult to isolate in synthetic systems. Using a series of amidate/ureido tripodal ligands, we have prepared and characterized monomeric Fe (III)OH complexes with similar trigonal-bipyramidal primary coordination spheres. Three anionic nitrogen donors define the trigonal plane, and the hydroxo oxygen atom is trans to an apical amine nitrogen atom. The complexes have varied secondary coordination spheres that are defined by intramolecular hydrogen bonds between the Fe (III)OH unit and the urea NH groups. Structural trends were observed between the number of hydrogen bonds and the Fe-O hydroxo bond distances: the more intramolecular hydrogen bonds there were, the longer the Fe-O bond became. Spectroscopic trends were also found, including an increase in the energy of the O-H vibrations with a decrease in the number of hydrogen bonds. However, the Fe (III/II) reduction potentials were constant throughout the series ( approximately 2.0 V vs [Cp 2Fe] (0/+1)), which is ascribed to a balancing of the primary and secondary coordination-sphere effects.     

Influence of solvent composition on the kinetics of cyclooctene epoxidation by hydrogen peroxide catalyzed by iron(III) [tetrakis(pentafluorophenyl)] porphyrin chloride [(F20TPP)FeCl

The epoxidation of cyclooctene catalyzed by iron(III) [tetrakis(pentafluorophenyl)] porphyrin chloride [(F20TPP)FeCl] was investigated in alcohol/acetonitrile solutions in order to determine the effects of the alcohol composition on the reaction kinetics. It was observed that alcohol composition affects both the observed rate of hydrogen peroxide consumption (the limiting reagent) and the selectivity of hydrogen peroxide utilization to form cyclooctene epoxide. The catalytically active species are formed only in alcohol-containing solvents as a consequence of (F(20)TPP)FeCl dissociation into [(F20TPP)Fe(ROH)]+ cations and Cl- anions. The observed reaction kinetics are analyzed in terms of a proposed mechanism for the epoxidation of the olefin and the decomposition of H2O2. The first step in this scheme is the reversible coordination of H2O2 to [(F20TPP)Fe(ROH)]+. The O-O bond of the coordinated H2O2 then undergoes either homolytic or heterolytic cleavage. The rate of homolytic cleavage is found to be independent of alcohol composition, whereas the rate of heterolytic cleavage increases with alcohol acidity. Heterolytic cleavage is envisioned to form iron(IV) pi-radical cations, whereas homolytic cleavage forms iron(IV) hydroxo cations. The iron(IV) radical cations are active for olefin epoxidation, whereas the iron(IV) cations catalyze the decomposition of H2O2. Reaction of iron(IV) pi-radical cations with H2O2 to form iron(IV) hydroxo cations is also included in the mechanism, a process that is favored by alcohols with a high charge density on the O atoms. The proposed mechanism describes successfully the effects of H2O2, cyclooctene, and porphyrin concentrations, as well as the effects of alcohol concentration.     

The thermodynamic properties of hydroxo compounds and the mechanism of ion flotation for cerium,europium, and yttrium

The pH values of formation of hydroxo complexes and hydrates in solutions of cerium(III), europium(III), and yttrium salts were determined by conductometric titration. The instability constants of hydroxo complexes, solubility products of hydroxides, and Gibbs energies of formation of the compounds specified were calculated. Conclusions about the mechanism of extraction and ion flotation of these metal cations from aqueous solutions were drawn.     

Monomeric iron(II) hydroxo and iron(III) dihydroxo complexes stabilized by intermolecular hydrogen bonding

Using the multidentate ligand bis(N-methylimidazol-2-yl)-3-methylthiopropanol (L), the mononuclear iron(II) hydroxo and iron(III) dihydroxo complexes [Fe(II)(L)2(OH)](BF4) (1) and [Fe(III)(L)2(OH)2](BF4) (2) have been synthesized and characterized by X-ray diffraction and spectroscopic methods. The X-ray data suggest that the remarkable stability of the Fe-OH bond(s) in both compounds results from intermolecular hydrogen-bonding interactions between the hydroxo ligand(s) and the tertiary hydroxyl of the L ligands, which prevent further intermolecular reactions.     

Sorption of iron(III)–alginate complexes on cellulose fibres

Multivalent ions take a significant role in the sorption of soluble polysaccharides on solid cellulose substrates and thus demonstrate an important principle in structural polysaccharide organisation. Sorption of Fe(III)–alginate complexes on lyocell fibres as model for the insoluble cellulose matrix has been studied between pH 3–13, at 30 and 60 °C. Sorption maximum of the Fe(III)–alginate complex was observed at pH 3 where the sorbed amounts of alginate and iron were 6,600 and 85 mg iron per kg cellulose respectively. Under the experimental conditions used, a concentration of 0.05 mM Fe(III) is sufficient to achieve surface sorption of Fe(III)–alginate complex. The alginate sorption exhibited minor dependence on molar ratio of Fe(III) to alginate. In environmental scanning electron microscopy no deposition of Fe-hydroxides on the fiber surface was detected. The thickness of the adsorbed Fe(III)–alginate layer on the fiber surface was estimated with 12–22 nm. Tensile strength and abrasion resistance of Fe(III)–alginate treated fibers were not reduced through the sorption treatment. Alginate modified cellulose is of interest as material for medical application, as sorbent and textile finish.     

Structural and spectroscopic features of a cis (hydroxo)-Fe(III)-(carboxylato) configuration as an active site model for lipoxygenases

In our preliminary communication (Ogo, S.; Wada, S.; Watanabe, Y.; Iwase, M.; Wada, A.; Harata, M.; Jitsukawa, K.; Masuda, H.; Einaga, H. Angew. Chem., Int. Ed. 1998, 37, 2102-2104), we reported the first example of X-ray analysis of a mononuclear six-coordinate (hydroxo)iron(III) non-heme complex, [Fe(III)(tnpa)(OH)(RCO(2))]ClO(4) [tnpa = tris(6-neopentylamino-2-pyridylmethyl)amine; for 1, R = C(6)H(5)], which has a characteristic cis (hydroxo)-Fe(III)-(carboxylato) configuration that models the cis (hydroxo)-Fe(III)-(carboxylato) moiety of the proposed (hydroxo)iron(III) species of lipoxygenases. In this full account, we report structural and spectroscopic characterization of the cis (hydroxo)-Fe(III)-(carboxylato) configuration by extending the model complexes from 1 to [Fe(III)(tnpa)(OH)(RCO(2))]ClO(4) (2, R = CH(3); 3, R = H) whose cis (hydroxo)-Fe(III)-(carboxylato) moieties are isotopically labeled by (18)OH(-), (16)OD(-), (18)OD(-), (12)CH(3)(12)C(18)O(2)(-), (12)CH(3)(13)C(16)O(2)(-), (13)CH(3)(12)C(16)O(2)(-), (13)CH(3)(13)C(16)O(2)(-), and H(13)C(16)O(2)(-). Complexes 1-3 are characterized by X-ray analysis, IR, EPR, and UV-vis spectroscopy, and electrospray ionization mass spectrometry (ESI-MS).     

Ligand substitution kinetics of the iron(III) hydroxo dimer with simple inorganic ligands

The kinetics and mechanisms of ligand substitution reactions of the iron(III) hydroxo dimer, Fe(2)(mu-OH)(2)(H(2)O)(8)(4+), with various inorganic ligands were studied by the stopped-flow method at 10.0 or 25.0 C in 1.0 M NaClO(4). The transient formation of the following di- and tetranuclear complexes was confirmed: Fe(2)(OH)SO(4)(3+), Fe(2)(OH)H(2)PO(2)(4+), Fe(2)(OH)HPO(3)(3+), Fe(2)(OH)SeO(3)(3+), and Fe(4)(AsO(4))(OH)(2)(7+). The catalytic effect of arsenic(III) on the hydrolytic reaction of iron(III) was also attributed to the formation of a dinuclear complex at very low concentration levels. Fast formation and subsequent dissociation of the multinuclear species into the corresponding mononuclear complexes (FeL) proceed via parallel reaction paths which, in general, show composite pH dependencies. The appropriate rate laws were established. The reactions of the different ligands occur at very similar rates, though the uninegatively charged singly deprotonated form reacts about 1 order of magnitude faster than the neutral form of the same ligand. The results can conveniently be interpreted in terms of a dissociative interchange mechanism which postulates the formation of an intermediate complex in which the ligand is coordinated to only one Fe(III) center of the hydroxo dimer. In a subsequent fast step, the ligand forms a bridge between the two metal ions by replacing one of the OH groups. The dissociation of the dinuclear complex into FeL most likely proceeds via the same intermediate.     

Adsorption of Ammonia and Sulfur Dioxide by Sorbents Based on Modified Montmorillonite

The sorption properties of montmorillonite modified with Fe(III) and Al(III) polyhydroxo complexes and with Fe(III)-Zr(IV), Fe(II)-Ni(II), and Fe(III)-Al(III) heteronuclear polyhydroxo complexes with respect to ammonia and sulfur dioxide were examined.     

Reversible hydrogen gas uptake in nanoporous Prussian Blue analogues

The family of dehydrated nanoporous Prussian Blue analogues, M(II)3[Co(III)(CN)6]2 (M(II) = Mn, Fe, Co, Ni, Cu, Zn, Cd), which contain coordinatively unsaturated divalent metal cations, undergoes reversible sorption of hydrogen gas up to 1.2 wt% (at 77 K, 101.3 kPa), the capacity of which depends on the metal ion.     

Diiron(III)–μ‐Fluoro Bisporphyrins: Effect of Bridging Ligand on the Metal Spin State

A hitherto unknown family of diiron(III)–μ‐fluoro bisporphyrins has been synthesized and structurally characterized. Fluoride abstraction from SbF₆^? and BF₄^? resulted in the synthesis of the μ‐fluoro complexes of ethane‐ and ethene‐bridged diiron(III) bisporphyrins. Two such complexes were structurally characterized, which revealed a single fluoro bridge between two iron centers with a remarkably bent Fe‐F‐Fe unit. Although isoelectronic with the μ‐hydroxo complexes, the μ‐fluoro species are quite divergent in terms of the electronic structure and properties. UV/Vis spectroscopy of the μ‐fluoro complex exhibits a large redshift (ca. 18 nm) of the Soret band in comparison to their μ‐hydroxo analog. Combined analysis by single crystal X‐ray structure determination and Mössbauer and ¹H NMR spectroscopy revealed the presence of two equivalent iron(III) centers in the μ‐fluoro complexes in both solid and solution phases. In contrast, the iron(III) centers of the μ‐hydroxo complexes are known to be inequivalent. Variable‐temperature magnetic studies show a weak antiferromagnetic interaction between the iron(III) centers of the μ‐fluoro complexes with coupling constants (J) ranging from ?33 to ?40 cm^?1. The experimental results were further supported by DFT calculations.     

2:2 Fe(III):ligand and "adamantane core" 4:2 Fe(III):ligand (hydr)oxo complexes of an acyclic ditopic ligand

A bis-hydroxo-bridged diiron(III) complex and a bis-mu-oxo-bis-mu-hydroxo-bridged tetrairon(III) complex are isolated from the reaction of 2,6-bis((N,N'-bis-(2-picolyl)amino)methyl)-4-tert-butylphenol (Hbpbp) with iron perchlorate in acidic and neutral solutions respectively. The X-ray structure of the dinuclear complex [{(Hbpbp)Fe([mu-OH)}(2)](ClO(4))(4).2C(3)H(6)O (1.2C3H6O) shows that only one of the metal-binding cavities of each ligand is occupied by an iron(III) atom and two [Fe(Hbpbp)]3+ units are linked together by two hydroxo bridging groups to form a [Fe(III)-(mu-OH)](2) rhomb structure with Fe...Fe = 3.109(1)A. The non-coordinated tertiary amine of Hbpbp is protonated. Magnetic susceptibility measurements show a well-behaved weak antiferromagnetic coupling between the two Fe(III) atoms, J= -8 cm(-1). The tetranuclear complex [(bpbp)(2)Fe(4)(mu-O)(2)(mu-OH)(2)](ClO(4))(4)(2) was isolated as two different solvates .4CH(3)OH and .6H(2)O with markedly different crystal morphologies at pH ca. 6. Complex .4CH(3)OH forms red cubic crystals and .6H(2)O forms green crystalline platelets. The Fe(4)O(6) core of shows an adamantane-like structure: The six bridging oxygen atoms are provided by the two phenolato groups of the two bpbp(-) ligands, two bridging oxo groups and two bridging hydroxo groups. The hydroxo and oxo ligands could be distinguished on the basis of Fe-O bond lengths of the two different octahedral iron sites: Fe-mu-OH, 1.953(5), 2.013(5)A and Fe-mu-O, 1.803(5), 1.802(5)A. The difference in ligand environment is too small for allowing Mossbauer spectroscopy to distinguish between the two crystallographically independent Fe sites. The best fit to the magnetic susceptibility of .4CH(3)OH was achieved by using three coupling constants J(Fe-OPh-Fe)= 2.6 cm(-1), J(Fe-OH-Fe)=-0.9 cm(-1), J(Fe-O-Fe)=-101 cm(-1) and iron(III) single ion ZFS (|D|= 0.15 cm(-1)).     

Tetrairon and hexairon hydroxo/acetato clusters stabilized by multiple polyoxometalate scaffolds. Structures, magnetic properties, and chemistry of a dimer and a trimer

Investigation of the catalytically relevant gamma-diiron(III) Keggin complexes in aqueous acetate buffer leads to a dimeric C(2v)-symmetric polyanion, [{Fe(OH)(OAc)}(4)(gamma-SiW(10)O(36))(2)](12-) (3) and a trimeric C(2)-symmetric polyanion, [{Fe(6)(OH)(9)(H(2)O)(2)(OAc)(2)}(gamma-SiW(10)O(36))(3)](17-) (4). Polyanion 3 incorporates a hydroxo/acetato-bridged tetrairon(III) core, while 4 incorporates a trigonal prismatic hydroxo/acetato-bridged hexairon(III) core. The monomeric building unit of 3 and 4, {gamma-SiW(10)Fe(2)}, adopts the "out-of-pocket" structural motif (with two corner-sharing FeO(6) coordination polyhedra no longer connected to the internal SiO(4) tetrahedron of the Keggin unit) also observed in the {gamma-SiW(10)Fe(2)}(-)type structures isolated from nonbuffered aqueous solutions. Following hydrolysis, 3 is converted to 4 as confirmed by (29)Si NMR. Magnetic measurements establish that in both 3 and 4 all exchange interactions are antiferromagnetic.     

Octadecyl-bonded silica membrane disk modified with Cyanex302 for pre-concentration and determination of iron in food products

A simple and rapid method using an octadecyl-bonded silica membrane disk impregnated with Cyanex302 is described for the pre-concentration and determination of iron. The influence of various parameters on sorption and elution of Fe(III) were systematically investigated. The sorption of Fe(III) at pH 3.2 was quantitative (99.3 +/- 1.1%). It was completely recovered using 20 mL 5.0 M HCI and determined by flame atomic absorption spectrometry. Breakthrough volume of the modified disk for Fe(III) was >2000 mL, pre-concentration factor was >100, and reusability up to 28 cycles. The LOD and LOQ for Fe(III) were 0.45 microg/L and 1.51 microg/L, respectively, while precision for its determination in terms of RSD was < or =2.1%. This method was applied for Fe(III) determination in milk, fortified flour, cocoa powder, tea, and black pepper. To validate the procedure, EPA Method Standard (QC standard 21) was analyzed for Fe(III).     

Arsenate uptake and arsenite simultaneous sorption and oxidation by Fe-Mn binary oxides: influence of Mn/Fe ratio, pH, Ca2+, and humic acid

Arsenate retention, arsenite sorption and oxidation on the surfaces of Fe-Mn binary oxides may play an important role in the mobilization and transformation of arsenic, due to the common occurrence of these oxides in the environment. However, no sufficient information on the sorption behaviors of arsenic on Fe-Mn binary oxides is available. This study investigated the influences of Mn/Fe molar ratio, solution pH, coexisting calcium ions, and humic acids have on arsenic sorption by Fe-Mn binary oxides. To create Fe-Mn binary oxides, simultaneous oxidation and co-precipitation methods were employed. The Fe-Mn binary oxides exhibited a porous crystalline structure similar to 2-line ferrihydrite at Mn/Fe ratios 1:3 and below, whereas exhibited similar structures to δ-MnO(2) at higher ratios. The As(V) sorption maximum was observed at a Mn/Fe ratio of 1:6, but As(III) uptake maximum was at Mn/Fe ratio 1:3. However, As(III) adsorption capacity was much higher than that of As(V) at each Mn/Fe ratio. As(V) sorption was found to decrease with increasing pH, while As(III) sorption edge was different, depending on the content of MnO(2) in the binary oxides. The presence of Ca(2+) enhanced the As(V) uptake under alkaline pH, but did not significantly influence the As(III) sorption by 1:9 Fe-Mn binary oxide; whereas the presence of humic acid slightly reduced both As(V) and As(III) uptake. These results indicate that As(III) is more easily immobilized than As(V) in the environment, where Fe-Mn binary oxides are available as sorbents and they represent attractive adsorbents for both As(V) and As(III) removal from water and groundwater.     

Preparation, characterization and metal sorption studies of a Chrome-Azurol-S-loaded anion-exchange resin

Chrome Azurol S (CS) was mobilized on an strongly basic anion-exchange resin (Dowex 2 x 4, in Cl(-) form) by batch equilibration. The modified resin was stable in acetate buffer solution and in 0.1 M HCl and H(2)SO(4), but it was readily degraded with 2-6 M HCl and HNO(3). Retention of Ba(II), Sr(II), Ca(II), Mg(II), Al(III), Cr(III), Zn(II), Fe(III), Ti(IV), Mn(II), Co(II), Ni(II), Cu(II), Cd(II) and Pb(II) was studied using the batch equilibration method. The uptake and recovery yields were determined by using inductively-coupled plasma atomic emission spectroscopy (for Mg, Al, Cr, Ti, Fe, Mn, Ni, Zn, Cu, Cd and Pb) and atomic absorption spectrophotometry (for Ba, Sr, Ca and Co). The optimum pH value was established for performing a selective separation of Al(III) from the other metal ions. The sorption capacities of the CS-loaded resing for Al(III), Cr(III), Mg(II) (at pH 6), Fe(III) (at pH 5) and Ti(IV) (at pH 4) were 14, 2.9, 0.3, 3 and 3.9 mumoles g(-1) respectively. On this basis a method for separating Al(III) from other cations was established.     

Amberlite XAD-7 impregnated with Xylenol Orange: a chelating collector for preconcentration of Cd(II), Co(II), Cu(II), Ni(II), Zn(II) and Fe(III) ions prior to their determination by flame AAS

A new chelating resin, Xylenol Orange coated Amberlite XAD-7, was prepared and used for preconcentration of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) prior to their determination by flame atomic absorption spectrophotometry. The optimum pH values for quantitative sorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) are 4.5-5.0, 4.5, 4.0-5.0, 4.0, 5.0 and 5.0-7.0, respectively, and their desorptions by 2 mol L(-1) HCl are instantaneous. The sorption capacity of the resin has been found to be 2.0, 2.6, 1.6, 1.6, 2.6 and 1.8 mg g(-1) of resin for Cd, Co, Cu, Fe, Ni and Zn, respectively. The tolerance limits of electrolytes, NaCl, NaF, NaI, NaNO3, Na2SO4 and of cations, Mg2+ and Ca2+ in the sorption of the six metal ions are reported. The preconcentration factor was between 50 and 200. The t1/2 values for sorption are found to be 5.3, 2.9, 3.2, 3.3, 2.5 and 2.6 min for the six metals, respectively. The recoveries are between 96.0 and 100.0% for the different metals at preconcentration limits between 10 to 40 ng mL(-1). The preconcentration method has been applied to determine the six metal ions in river water samples after destroying the organic matter (if present in very large amount) with concentrated nitric acid (RSD < or = 8%, except for Cd for which it is upto 12.6%) and cobalt content of vitamin tablets with RSD of approximately 3.0%.     

Thermodynamic and Kinetic Studies for the Adsorption of Fe(III) and Ni(II) Ions From Aqueous Solution Using Natural Bentonite

In this study, the adsorption behavior of natural bentonite with respect to Fe(III) and Ni(II) has been studied in order to consider its application to purity metal finishing wastewaters. During the adsorption process, batch technique is used, and the effects of pH, bentoite amount, temperature, heavy metal concentration, bentonite treatment (calcinations of natural bentonite at 700°C, washing by deionized water to remove the excess salt from bentonite surface), and agitation time on adsorption efficiency are studied. The washed and calcined bentonite samples were labeled by WB and CB, respectively. The pH-dependence of Fe(III) and Ni(II) sorption on the bentonite is significantly more noticeable, indicating a major contribution of surface complexation at the edge sites. It was determined that adsorption of Fe(III) and Ni(II) is well fitted by the second order reaction kinetic. Furthermore, the sorption rate of Fe(III) was higher than the sorption rate of Ni(II). Adsorption of Fe(III) and Ni(II) on NB appeared to follow Langmuir isotherm. In addition, calculated and experimental adsorbed amounts of Fe(III) by the unit NB mass are very higher than Ni(II). The paper also discusses the thermodynamic parameters of the adsorption (the Gibbs free energy, entropy, and enthalpy). Our results demonstrate that the adsorption process was spontaneous and endothermic under natural conditions. Also the adsorption capacity of bentonite for Fe(III) Ni(II) and increases with increased bentonite dose. According to the equilibrium studies, the selectivity sequence can be given as Fe(III) > Ni(II). The adsorbed amount of Fe(III) and Ni(II) on washed bentonite (WB) were very higher compared to NB and CB. Our results show that bentonite could especially WB be considered as a potential adsorbent for Fe(III) and Ni(II) removal from aqueous solutions.