Thiol with an unusual adsorption-desorption behavior: 6-mercaptopurine on Au(111)

A multitechnique study of 6-mercaptopurine (6MP) adsorption on Au(111) is presented. The molecule adsorbs on Au(111), originating short-range ordered domains and irregular nanosized aggregates with a total surface coverage by chemisorbed species smaller than those found for alkanethiol SAMs, as derived from scanning tunneling microscopy (STM) and electrochemical results. X-ray photoelectron spectroscopy (XPS) results show the presence of a thiolate bond, whereas density functional theory (DFT) data indicate strong chemisorption via a S-Au bond and additional binding to the surface via a N-Au bond. From DFT data, the positive charge on the Au topmost surface atoms is markedly smaller than that found for Au atoms in alkanethiolate SAMs. The adsorption of 6MP originates Au atom removal from step edges but no vacancy island formation at (111) terraces. The small coverage of Au islands after 6MP desorption strongly suggests the presence of only a small population of Au adatom-thiolate complexes. We propose that the absence of the Au-S interface reconstruction results from the lack of significant repulsive forces acting at the Au surface atoms.     

氧化锌有序结构在Au(111)和Cu(111)上的生长

利用NO₂或O₂作为氧化剂,研究了氧化锌在Au(111)和Cu(111)上的生长和结构。NO₂表现了更好的氧化性能,有利于有序氧化锌纳米结构或薄膜的生长。在Au(111)和Cu(111)这两个表面上,化学计量比氧化锌都形成非极性的平面化ZnO(0001)的表面结构。在Au(111)上,NO₂气氛下室温沉积锌倾向于形成双层氧化锌纳米结构;而在更高的沉积温度下,在NO₂气氛中沉积锌则可同时观测到单层和双层氧化锌纳米结构。O₂作为氧化剂时可导致形成亚化学计量比的ZnO_x结构。由于铜和锌之间的强相互作用会促进锌的体相扩散,并且铜表面可以被氧化形成表面氧化物,整层氧化锌在Cu(111)上的生长相当困难。我们通过使用NO₂作为氧化剂解决了这个问题,生长出了覆盖Cu(111)表面的满层有序氧化锌薄膜。这些有序氧化锌薄膜表面显示出莫尔条纹,表明存在一个ZnO和Cu(111)之间的莫尔超晶格。实验上观察到的超晶格结构与最近理论计算提出的Cu(111)上的氧化锌薄膜结构相符,具有最小应力。我们的研究表明,氧化锌薄膜的表界面结构可能会随氧化程度或氧化剂的不同而变化,而Cu(111)的表面氧化也可能影响氧化锌的生长。当Cu(111)表面被预氧化成铜表面氧化物时,ZnO_x的生长模式会发生变化,锌原子会受到铜氧化物晶格的限域形成单位点锌。我们的研究表明了氧化锌的生长需要抑制锌向金属基底的扩散,并阻止亚化学计量比ZnO_x的形成。因此,使用原子氧源有利于在Au(111)和Cu(111)表面上生长有序氧化锌薄膜。     

Reconstruction-Dependant Self-Assembly of n-Alkanes on Au(111)

Highly ordered molecular monolayers at the solid/liquid interfaces play a critical role in many technologically important areas, such as lubrication, adhesion, molecular recognition and chemical reactions. Although there are a number of results on the monolayers of organic molecules physisorbed on the solid surfaces being reported, the role of the substrate lattice parameters, the substrate structures and the defects in the formation of the highly ordered monolayers has not yet well explored. In this paper, we reported the scanning tunneling microscopy (STM) studies of the self-assembling phenomenon of n-alkanes in the interfaces between n-alkane solutions and the Au(111) surfaces.     

Self-assembly of alkanols on Au(111) surfaces

Self-assembled monolayers (SAMs) of alkanols (1-C(N)H(2N+1)OH) with varying carbon-chain lengths (N = 10-30) have been systematically studied by means of scanning tunneling microscopy (STM) at the interfaces between alkanol solutions (or liquids) and Au(111) surfaces. The carbon skeletons were found to lie flat on the surfaces. This orientation is consistent with SAMs of alkanols on highly oriented pyrolytic graphite (HOPG) and MoS2 surfaces, and also with alkanes on reconstructed Au(111) surfaces. This result differs from a prior report, which claimed that 1-decanol molecules (N = 10) stood on their ends with the OH polar groups facing the gold substrate. Compared to alkanes, the replacement of one terminal CH3 group with an OH group introduces new bonding features for alkanols owing to the feasibility of forming hydrogen bonds. While SAMs of long-chain alkanols (N > 18) resemble those of alkanes, in which the aliphatic chains make a greater contribution, hydrogen bonding plays a more important role in the formation of SAMs of short-chain alkanols. Thus, in addition to the titled lamellar structure, a herringbone-like structure, seldom seen in SAMs of alkanes, is dominant in alkanol SAMs for values of N < 18. The odd-even effect present in alkane SAMs is also present in alkanol SAMs. Thus, the odd N alkanols (alkanols with an odd number of carbon atoms) adopt perpendicular lamellar structures owing to the favorable interactions of the CH3 terminal groups, similar to the result observed for odd alkanes. In contrast to alkanes on Au(111) surfaces, for which no SAMs on an unreconstructed gold substrate were observed, alkanols are capable of forming SAMs on either the reconstructed or the unreconstructed gold surfaces. Structural models for the packing of alkanol molecules on Au(111) surfaces have been proposed, which successfully explain these experimental observations.     

Chiral structures of 6,12-dibromochrysene on Au(111) and Cu(111) surfaces

Nanoscale low-dimensional chiral architectures are increasingly receiving scientific interest, because of their potential applications in many fields such as chiral recognition, separation and transformation. Using 6,12-dibromochrysene (DBCh), we successfully constructed and characterized the large-area two-dimensional chiral networks on Au(111) and one-dimensional metal-liganded chiral chains on Cu(111) respectively. The reasons and processes of chiral transformation of chiral networks on Au(111) were analyzed. We used scanning tunneling spectroscopy (STS) to analyze the electronic state information of this chiral structure. This work combines scanning tunneling microscopy (STM) with non-contact atomic force microscopy (nc-AFM) techniques to achieve ultra-high-resolution characterization of chiral structures on low-dimensional surfaces, which may be applied to the bond analysis of functional nanofilms. Density functional theory (DFT) was used to simulate the adsorption behavior of the molecular and energy analysis in order to verify the experimental results.     

Electrocapillarity behavior of Au111 in SO4(2-) and F-

We present the first set of results measuring the change in interfacial free energy and surface stress for Au(111) electrodes in an electrolyte containing a nonspecifically adsorbing anion and compare this behavior to that in an electrolyte containing an anion known to undergo specific adsorption. Generally, we find that the surface stress is more sensitive to changes in electrode potential and adsorption then the interfacial free energy. The results obtained in fluoride electrolytes are compared to the predictions of a thermodynamic analysis.     

Au adatoms in self-assembly of benzenethiol on the Au(111) surface

Self-assembly of benzenethiol at low coverage on Au(111) was studied using low-temperature scanning tunneling microscopy. Phenylthiolate species (PhS), formed by thermal dehydrogenation of the parent PhSH molecule, was found to self-assemble into surface-bonded complexes with gold adatoms. Each complex involves two PhS species and one gold adatom. The PhS species form either cis- or trans-geometry relative to each other. At a higher coverage, the complexes coalesce, most likely due to the formation of weak C-H...S hydrogen bonds facilitated by the spatial arrangement of the PhS groups. Our findings thus establish that the self-assembly of arenethiols on the Au(111) surface is driven by gold adatom chemistry, which has recently been found to be the key ingredient in the self-assembly of alkanethiols on gold.     

Surface bonding and dynamical behavior of the CH3SH molecule on Au(111)

The chemisorption of the undissociated CH3SH molecule on the Au(111) surface has been studied at 5 K using scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. The molecule was found to adsorb on atop Au sites on the defect-free surface. CH3SH undergoes hindered rotation about the Au-S bond on the defect-free surface which is seen in STM as a time-averaged 6-fold pattern. The pattern suggests that the potential minima directions occur for the rotating molecule at the six hollow sites surrounding the atop adsorption site. The barrier for rotation, obtained by DFT calculations, is approximately 0.1 kcal.mol(-1). At low coverages, preferential adsorption occurs at defect sites in the surface, namely, the herringbone "elbows" and random atomic step sites. Molecules adsorbed on these sites do not exhibit rotational freedom.     

Length-Dependent Magnetic Evolution of Anthenes on Au(111)

Nanographenes with zigzag edges, for example, anthenes, exhibit a unique nonbonding π-electron state, which can be described as a spin-polarized edge state that yields specific magnetic ground state. However, prior researches on the magnetism of anthenes with varying lengths on a surface is lacking. This study systematically fabricated anthenes with inherent zigzag carbon atoms of different lengths ranging from bisanthene to hexanthene. Their magnetic evolution on the Au(111) surface was analyzed through bond-resolved scanning probe techniques and density functional theory calculations. The analyses revealed a transition in magnetic properties associated with the length of the anthenes, arising from the imbalance between hybridization energy and the Coulomb repulsion between valence electrons. With the increasing length of the anthenes, the ground state transforms gradually from a closed-shell to an antiferromagnetic open-shell singlet, exhibiting a weak exchange coupling of 4 meV and a charge transfer-induced doublet. Therefore, this study formulated a chemically tunable platform to explore size-dependent π magnetism at the atomic scale, providing a framework for research in organic spintronics.     

Imaging the Bonds of Dehalogenated Benzene Radicals on Cu(111) and Au(111)

Dissociative adsorption of doubly substituted benzene molecules leads to formation of benzyne radicals. In this study, co‐adsorbed hydrogen molecules are used in scanning tunneling hydrogen microscopy to enhance the contrast of the meta‐ and the para‐isomers of these radicals on Cu(111) and Au(111). Up to three hydrogen molecules are attached to one radical. One hydrogen molecule reveals the orientation of the carbon ring and its adsorption site, allowing discrimination between the two radicals. Two hydrogen molecules reflect the bond picture of the carbon skeleton and reveals that adsorption on Cu(111) distorts the meta‐ isomer differently from its gas‐phase distortion. Three hydrogen molecules allow us to determine the bond picture of a minor species.     

Self-Assembled Monolayers of N-Heterocyclic Olefins on Au(111)

Self-assembled monolayers (SAMs) of N-heterocyclic olefins (NHOs) have been prepared on Au(111) and their thermal stability, adsorption geometry, and molecular order were characterized by X-ray photoelectron spectroscopy, polarized X-ray absorption spectroscopy, scanning tunneling microscopy (STM), and density functional theory (DFT) calculations. The strong σ-bond character of NHO anchoring to Au induced high geometrical flexibility that enabled a flat-lying adsorption geometry via coordination to a gold adatom. The flat-lying adsorption geometry was utilized to further increase the surface interaction of the NHO monolayer by backbone functionalization with methyl groups that induced high thermal stability and a large impact on work-function values, which outperformed that of N-heterocyclic carbenes. STM measurements, supported by DFT modeling, identified that the NHOs were self-assembled in dimers, trimers, and tetramers constructed of two, three, and four complexes of NHO−Au-adatom. This self-assembly pattern was correlated to strong NHO−Au interactions and steric hindrance between adsorbates, demonstrating the crucial influence of the carbon-metal σ-bond on monolayer properties.     

Two-dimensional Molecular Phase Transition of Alkylated-TDPB on Au(111) and Cu(111) Surfaces

The derivatives of aromatic cores bearing alkyl chains with different lengths are of potential interest in on-surface chemistry, and thus have been widely investigated both at liquid-solid interfaces and in vacuum. Here, we report on the structural evaluation of self-assembled 1,3,5-tri(4-dodecylphenyl)benzene(TDPB) molecules with increased molecular coverages on both Au(111) and Cu(111) surfaces. As observed on Au(111), rhombic and herringbone structures emerge successively depending on surface coverage. In the case of Cu(111), the same process of phase conversion is also observed, but with two distinct structures. In comparison, the self-assembled structures on Au(111) surface are packed more densely than that on Cu(111) surface under the same preparation conditions. This may fundamentally result from the higher adsorption energy of TDPB molecules on Cu(111), restricting their adjustment to optimize a thermodynamically favorable molecular packing.     

Partial oxidation of propene on oxygen-covered Au(111)

Partial oxidation of propene is promoted by Au following deposition of atomic oxygen (0.3 ML) via O3 decomposition on Au(111) at 200 K. Several partial oxidation products--acrolein, acrylic acid, and carbon suboxide (O=C=C=C=O)-are produced in competition with combustion to CO2 and H2O. Acrolein is the primary partial oxidation product, and it is further oxidized to the other products by excess oxygen. We propose that acrolein is derived from allyloxy intermediate that is formed via insertion of oxygen into the allylic C-H bond. While no propene epoxide formation is detected from oxidation of C3H6, a small amount of epoxidation is observed during reaction of C3D6 and CD3CH=CH2. These results are strong indications that small changes in the energy required for allylic C-H activation, in this case due to a kinetic isotope effect, may dramatically change the selectivity; thus, small modifications of the properties of oxygen on Au may lead to the more desirable epoxidation process. Our results are discussed in the context of the origin of activity of Au-based catalysts.     

Au(111)表面Verdazyl自由基的构象转换

Pure organic radical molecules on metal surfaces are of great significance in exploration of the electron spin behavior. However, only a few of them are investigated in surface studies due to their poor thermal stability. The adsorption and conformational switching of two verdazyl radical molecules, namely, 1, 5-biisopropyl-3-(benzo[b]benzo[4,5]thieno[2, 3-d]thiophen-2-yl)-6-oxoverdazyl (B2P) and 1, 5-biisopropyl-3-(benzo[b]benzo[4,5]thieno[2, 3-d]thiophen-4-yl)-6-oxoverdazyl (B4P), are studied by scanning tunneling microscopy (STM) and density functional theory (DFT). The adsorbed B2P molecules on Au(111) form dimers, trimers and tetramers without any ordered assembly structure in which two distinct appearances of B2P in STM images are observed and assigned to be its "P" and "T" conformations. The "P" conformation molecules appear in the STM image with a large elliptical protrusion and two small ones of equal size, while the "T" ones appear with a large protrusion and two small ones of different size. Likewise, the B4P molecules on Au(111) form dimers at low coverage, strip structure at medium coverage and assembled structure at high coverage which also consists of above-mentioned two conformations. Both B2P molecules and B4P molecules are held together by weak intermolecular interaction rather than chemical bond. STM tip induced conformational switching of both verdayzl radicals is observed at the bias voltage of +2.0 V. The "T" conformation of B2P can be switched to the "P" while the "P" conformation of B4P can be switched to the "T" one. For both molecules, such a conformational switching is irreversible. The DFT calculations with Perdew-Burke-Ernzerhof version exchange-correlation functional are used to optimize the model structure and simulate the STM images. STM images of several possible molecular conformations with different isopropyl orientation and different tilt angle between verdazyl radical and Au(111) surface are simulated. For conformations with different isopropyl orientation, the STM simulated images are similar, while different tilt angles of verdazyl radical lead to significantly different STM simulated images. Combined STM experiments and DFT simulations reveal that the conformational switching originates from the change of tilting angle between the verdazyl radical and Au(111) surface. The tilt angles in "P" and "T" conformations are 0° and 50°, respectively. In this study, two different adsorption conformations of verdazyl radicals on the Au(111) surface are presented and their exact adsorption structures are identified. This study provides a possible way to study the relationship between the electron spin and configuration conversion of pure organic radical molecules and a reference for designing more conformational switchable radical molecules that can be employed as interesting molecular switches.     

Electrodeposition of Au-Cd alloy nanostructures on Au(111)

This report concerns an in-situ scanning tunneling microscopy study of the initial stages in the formation of a Au-Cd alloy on the Au(111) herringbone reconstruction. Although Au-Cd nanoclusters of alloy have been observed in sulfate electrolyte by this group, alloy "nanowires" were observed to form preferentially in the hcp regions between the sets of "soliton" walls of the reconstruction only in the presence of chloride. The nanowires were formed at -0.55 V versus 3 M Ag/AgCl, corresponding to Cd underpotential deposition (upd). Upd is electrodeposition at a potential prior to that needed to deposit the bulk element.     

Coverage-dependent adsorption geometry of octithiophene on Au(111)

The adsorption behavior of α-octithiophene (8T) on the Au(111) surface as a function of 8T coverage has been studied with low-temperature scanning tunneling microscopy, high resolution electron energy loss spectroscopy as well as with angle-resolved two-photon photoemission and ultraviolet photoemission spectroscopy. In the sub-monolayer regime 8T adopts a flat-lying adsorption geometry. Upon reaching the monolayer coverage the orientation of 8T molecules changes towards a tilted configuration, with the long molecular axis parallel to the surface plane, facilitating attractive intermolecular π-π-interactions. The photoemission intensity from the highest occupied molecular orbitals (HOMO and HOMO - 1) possesses a strong dependence on the adsorption geometry due to the direction of the involved transition dipole moment for the respective photoemission process. The change in molecular orientation as a function of coverage in the first molecular layer mirrors the delicate balance between intermolecular and molecule/substrate interactions. Fine tuning of these interactions opens up the possibility to control the molecular structure and accordingly the desirable functionality.     

Formation of trioctylamine from octylamine on Au(111)

The adsorption of octylamine on Au(111) under ultrahigh vacuum conditions is investigated. The molecules surprisingly undergo a thermally activated chemical reaction, resulting in formation of trioctylamine as confirmed both by X-ray photoelectron spectroscopy (XPS) and by comparison to the scanning tunneling microscopy (STM) signature of trioctylamine deposited directly onto the surface.     

Bimolecular networks and supramolecular traps on Au(111)

We demonstrate the formation of intermixed phases and self assembled molecular templates on the Au(111) surface. The templates are stabilized by hydrogen bonding between melamine molecules with trigonal symmetry and linear PTCDI (perylene tetra-carboxylic di-imide) molecules. When annealed, these molecules spontaneously form either a chiral intermixed phase or a honeycomb arrangement in which vertexes and edges correspond respectively to melamine and PTCDI molecules. We also observe minority phases with more complex intermolecular junctions. The use of these networks as templates is demonstrated by the controlled capture of fullerenes within the pores of the network to form dimers, hexamers, and heptamers. Our results confirm that bimolecular templates can be realized on a range of substrates.