Dual pH and glucose sensitive gel gated mesoporous silica nanoparticles for drug delivery

A low-molecular-weight gel with dual pH and glucose sensitivity was designed as the gate controller for mesoporous silica nanoparticles (MSNs) to fabricate a smart drug delivery system. The smart gel caped MSNs could control the antidiabetic drug release via the detection of glucose and pH levels.     

Bioresponsive mesoporous silica nanoparticles for triggered drug release

Mesoporous silica nanoparticles (MSNPs) have garnered a great deal of attention as potential carriers for therapeutic payloads. However, achieving triggered drug release from MSNPs in vivo has been challenging. Here, we describe the synthesis of stimulus-responsive polymer-coated MSNPs and the loading of therapeutics into both the core and shell domains. We characterize MSNP drug-eluting properties in vitro and demonstrate that the polymer-coated MSNPs release doxorubicin in response to proteases present at a tumor site in vivo, resulting in cellular apoptosis. These results demonstrate the utility of polymer-coated nanoparticles in specifically delivering an antitumor payload.     

Pt nanoparticles modified Au nanowire array for amperometric and potentiometric detection of glucose

A new glucose biosensor, based on the modification of highly ordered Au nanowire arrays (ANs) with Pt nanoparticles (PtNPs) and subsequent surface adsorption of glucose oxidase (GOx), is described. Morphologies of ANs and ANs/PtNPs were observed by scanning electron microscope. The electrochemical properties of ANs, ANs/GOx, ANs/PtNPs, and ANs/PtNPs/GOx electrodes were compared by cyclic voltammetry. Results obtained from comparison of the cyclic voltammograms show that PtNPs modification enhances electrochemical catalytic activity of ANs to H₂O₂. Hence, ANs/PtNPs/GOx biosensor exhibits much better sensing to glucose than ANs/GOx. Optimum deposition time of ANs/PtNPs/GOx biosensor for both amperometric and potentiometric detection of glucose was achieved to be 150 s at deposition current of 1?×?10^?6 A. A sensitivity of 0.365 μA/mM with a linear range from 0.1 to 7 mM was achieved for amperometric detection; while for potentiometric detection the sensitivity is 33.4 mV/decade with a linear range from 0.1 to 7 mM.     

Anionic-cationic switchable amphoteric monodisperse mesoporous silica nanoparticles

Anionic-cationic switchable monodisperse mesoporous silica nanoparticles were synthesized by one-pot amino and carboxylic acid bifunctionalization based on the self-assembly of the surfactant, two types of co-structure-directing agents containing amino and carboxylic groups, and silica sources. These nanoparticles revealed properties of dispersity and reversibility, with the advantage of the pH-responsive anionic-cationic/acid-base switchability. It was demonstrated that the extracted materials achieved reutilization and controllable dispersity in aqueous solution by adjusting the static electric power among the particles during the switching process.     

Characterization of gold nanoparticles electrochemically deposited on amine-functioned mesoporous silica films and electrocatalytic oxidation of glucose

This study reports the preparation and characterization of gold nanoparticles deposited on amine-functioned hexagonal mesoporous silica (NH₂–HSM) films and the electrocatalytic oxidation of glucose. Gold nanoparticles are fabricated by electrochemically reducing chloroauric acid on the surface of NH₂–HSM film, using potential step technology. The gold nanoparticles deposited have an average diameter of 80 nm and show high electroactivity. Prussian blue film can form easily on them while cycling the potential between −0.2 and 0.6 V (vs saturated calomel electrode) in single ferricyanide solution. The gold nanoparticles loading NH₂–HSM-film-coated glassy carbon electrode (Au–NH₂–HSM/GCE) shows strong catalysis to the oxidation of glucose, and according to the cathodic oxidation peak at about 0.16 V, the catalytic current is about 2.5 μA mM⁻¹. Under optimized conditions, the peak current of the cathodic oxidation peak is linear to the concentration of glucose in the range of 0.2 to 70 mM. The detection limit is estimated to be 0.1 mM. In addition, some electrochemical parameters about glucose oxidation are estimated.     

One pot glucose detection by [Fe(III)(biuret-amide)] immobilized on mesoporous silica nanoparticles: an efficient HRP mimic

An [Fe(III)(biuret-amide)] complex has been immobilized onto mesoporous silica nanoparticles via Cu(I) catalyzed azide-alkyne click chemistry. This hybrid material functions as an efficient peroxidase mimic and was successfully used for the quantitative determination of hydrogen peroxide and glucose via a one-pot colorimetric assay.     

Microfluidization-assisted synthesis of hollow mesoporous silica nanoparticles

Hollow mesoporous silica nanoparticles (HMSNs) with the diameter in range of 100–500 nm and the wall thickness of about 50 nm were synthesized by templates of cetyltrimethylammonium bromide under the assistant of microfluidization technique. These HMSNs were demonstrated effective drug loading and a pH-responsive drug release.     

Porphyrin-doped mesoporous silica films for rapid TNT detection

Two kinds of porphyrin-doped silica films with mesoporous structures were fabricated using evaporation-introduced self-assembly approach and examined for chemosensor applications to detect explosive compounds such as 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (DNT), and nitrobenzene (NB). All synthesized silica films showed high fluorescence quenching sensitivity toward the vapors of TNT, DNT, and NB but is strongly dependent on pore structure. The silica film with three dimensional pore structure exhibits the highest quenching efficiency close to the quenching efficiency reported for emissive conjugated polymers, indicating these kinds of mesostructured composites are potentially useful chemosensory materials for rapidly detecting trace explosives. The preparation conditions, the structures of the resulting films, their sensing performances, and the fluorescence quenching mechanism were discussed in this paper.     

Nonenzymatic amperometric sensor of hydrogen peroxide and glucose based on Pt nanoparticles/ordered mesoporous carbon nanocomposite

A simple and facile synthetic method to incorporate Pt nanoparticles inside the mesopores of ordered mesoporous carbons (OMCs) is reported. The Pt/OMCs nanocomposite was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and nitrogen adsorption-desorption. The results show that the incorporation of Pt nanoparticles inside the pores of OMCs does not change the highly ordered two-dimensional hexagonal mesostructure of OMCs matrix. Nonenzymatic amperometric sensor of hydrogen peroxide and glucose based on the Pt/OMCs nanocomposite-modified glassy carbon (GC) electrode is developed. Compared with the original OMCs-modified electrode, the Pt/OMCs-modified electrode displays improved current response towards hydrogen peroxide and gives linear range from 2 to 4212 μM. At an applied potential of −0.08 V, the Pt/OMCs nanocomposite gives linearity in the range of 0.5-4.5 mM glucose in neutral buffered saline solution. This glucose sensor also exhibits good ability of anti-interference to electroactive molecules. The combination the unique properties of Pt nanoparticles and the ordered mesostructure of OMCs matrix guarantees the enhanced response for hydrogen peroxide and glucose.     

Temperature-sensitive polypeptide brushes-coated mesoporous silica nanoparticles for dual-responsive drug release

A biopolymer-inorganic hybrid system (MSN@PBLGF) is designed and fabricated from mesoporous silica nanoparticles (MSNs) and folic acid (FA)-terminated temperature-sensitive synthetic polypeptide, i.e., poly(γ-benzyl-l-glutamate) (PBLG) derivative, through a thiol-disulfide exchange reaction, where MSNs with high drug loading capacity serve as drug nanocarriers and the biocompatible PBLG biopolymer brushes installed on MSN surface through disulfide bonds endow the system with tumor-specific recognition ability and GSH/temperature dual-stimuli responsiveness. Controlled drug release experiments indicate that DOX can be tightly hosted in the system with limited premature release, but efficiently released in response to an increased concentration of GSH and/or an elevated temperature. Intracellular experiments demonstrate that the DOX-loaded MSN@PBLGF nanohybrid shows outstanding cellular uptake and cell-growth inhibition effects on human lung cancer cell line A549 in comparison with healthy human cells such as hepatocyte cells LO2.     

Temperature-sensitive polypeptide brushes-coated mesoporous silica nanoparticles for dual-responsive drug release

A multifunctional nanohybrid based on mesoporous silica nanoparticle and biocompatible polypeptide was fabricated for targeted and dual-responsive therapy of tumor cells.     

A novel fluorescent aptasensor based on mesoporous silica nanoparticles for the selective detection of sulfadiazine in edible tissue

Sulfadiazine (SDZ) is a broad-spectrum antibiotic used to treat bacterial infections in animals, and SDZ residues in food can be harmful to human health. As a result, an aptasensor based on silica nanoparticles was developed for the rapid detection of SDZ. An aptamer that specifically binds to SDZ was obtained using graphene oxide-SELEX and further truncated to a 13 nt sequence (SDZ30-1:5′-AACCCAATGGGAT-3′), which has a high affinity (K_d = 65.72 nM). In addition, it was found by molecular simulation that a steric hindrance could prevent the target molecule from entering the binding pocket formed by the key base “TGG”, which affects the total binding free energy of SDZ30-1 and the target molecule, thereby affecting the affinity of SDZ30-1 to the target. The SDZ30-1 was selected as the fluorescent probe to establish an aptasensor for the detection of SDZ residues in milk and honey. The aptasensor exhibited a wide dynamic linear range (3.125 – 100 ng/mL) and a limit of detection (LOD = 1.68 ng/mL). The aptasensor in spiked samples recovered at a rate of 95.12 – 105.47%, with a coefficient of variation of less than 13.18 %. The results of aptasensor were positively correlated with those of HPLC (R² > 0.8687). Based on the above results, it could be inferred that the aptasensor can be used sensitively and rapidly for the detection of SDZ residues in edible tissue.     

Adenosine triphosphate detection by controlled-release of carboxy fluorescein from mesoporous silica nanoparticles blocked with aptamer-based gold nanoparticles

In this paper, an adenosine-5′-triphosphate (ATP) controlled-release strategy to construct a fluorescence sensing platform has been designed. In the sensing platform, because of ATP aptamer and singlestranded DNA (ssDNA)-linked mesoporous silica nanoparticles (Si-MPs) were hybridized, the pores of Si-MPs were blocked with Au nanoparticles (AuNPs) modified with ATP aptamer. Carboxy fluorescein was plugged in channels of Si-MPs. In the presence of target molecule ATP, the ATP aptamer combined with ATP and the AuNPs got away from the pore of the surface of Si-MPs modified by ssDNA. 5-Carboxyfluorescein molecule was released to allow the fluorescent detection. By monitoring the fluorescence at 518 nm, ATP could be quantitatively detected with a detection limit of 6 × 10^–8 M. The linear response range was 6 × 10^–8 to 1 × 10^–6 M. This assay was also able to discriminate ATP from its analogs. The controlled-release aptamer-based biosensor could have an effective application in human breast cancer MCF-7 cells.     

Hollow mesoporous silica nanoparticles for intracellular delivery of fluorescent dye

In this study, hollow mesoporous silica nanoparticles (HMSNs) were synthesized using the sol-gel/emulsion approach and its potential application in drug delivery was assessed. The HMSNs were characterized, by transmission electron microscopy (TEM), Scanning Electron Microscopy (SEM), nitrogen adsorption/desorption and Brunauer-Emmett-Teller (BET), to have a mesoporous layer on its surface, with an average pore diameter of about 2 nm and a surface area of 880 m²/g. Fluorescein isothiocyanate (FITC) loaded into these HMSNs was used as a model platform to assess its efficacy as a drug delivery tool. Its release kinetic study revealed a sequential release of FITC from the HMSNs for over a period of one week when soaked in inorganic solution, while a burst release kinetic of the dye was observed just within a few hours of soaking in organic solution. These FITC-loaded HMSNs was also found capable to be internalized by live human cervical cancer cells (HeLa), wherein it was quickly released into the cytoplasm within a short period of time after intracellular uptake. We envision that these HMSNs, with large pores and high efficacy to adsorb chemicals such as the fluorescent dye FITC, could serve as a delivery vehicle for controlled release of chemicals administered into live cells, opening potential to a diverse range of applications including drug storage and release as well as metabolic manipulation of cells.     

Development of amperometric glucose biosensor through immobilizing enzyme in a Pt nanoparticles/mesoporous carbon matrix

Pt nanoparticles were deposited on mesoporous carbon material CMK-3. Glucose oxidase (GOx) was immobilized in the resulting Pt nanoparticles/mesoporous carbon (Pt/CMK-3) matrix, and then the mixture was cast on a glassy carbon electrode (GCE) using gelatin as a binder. The glucose biosensor exhibited excellent current response to glucose after cross-linking with glutaraldehyde. At 0.6V (vs. SCE) the response current was linear to glucose concentration in the range of 0.04-12.2mM. The response time (time for achieving 95% of the maximum current) was 15s and the detection limit (S/N=3) was 1 microM. The Michaelis-Menten constant (K(m)(app)) and the maximum current density (i(max)) were 10.8 mM and 908 microAcm(-2), respectively. The activation energy of the enzymatic reaction was estimated to be 22.54 kJ mol(-1). The biosensor showed good stability. It achieved the maximum response current at about 52 degrees C and retained 95.1% of its initial response current after being stored for 30 days. In addition, some fabrication and operation parameters for the biosensor were optimized in this work. The biosensor was used to monitor the glucose levels of serum samples after being covered with an extra Nafion film to improve its anti-interferent ability and satisfied results were obtained.     

Functionalisation of mesoporous silica nanoparticles with 3-isocynatopropyltrichlorosilane

The functionalisation of Mesoporous Silica Nanoparticles (MSN) with the isocyanate group was carried out. The excellent reactivity of 3-isocynanatopropyltrichlorosilane allowed its grafting on the surface of MSN in mild conditions. Further reaction with different nucleophiles bearing primary amino groups led to the formation of a urea linkage and thus the covalent grafting of the nucleophiles to the MSN surface.     

Fabrication of autofluorescent protein coated mesoporous silica nanoparticles for biological application

Glucose sensitive and autofluorescent protein coated mesoporous silica nanoparticles are synthesized through a layer-by-layer technique. The resulting nano-composites can be adhered to the surface of a cell and embedded into the cell membrane. These unique features make this nanocomposite a good candidate as cell marker or drug carrier.     

Bisindole anchored mesoporous silica nanoparticles for cyanide sensing in aqueous media

For CN(-) recognition, a series of bisindolyl compounds 1-3 were prepared, and their chromodosimetric color changes toward anions were investigated. Nucleophilic addition of the cyanide ion to the meso position of the bisindolyl group gave rise to breaking of the double bond conjugation, thereby inducing spectroscopic changes in the compound. Mesoporous silica nanoparticles 3 also gave color changes from deep orange to yellow in response to the cyanide ion.     

Dendritic cell internalization of foam-structured fluorescent mesoporous silica nanoparticles

In this paper, foam-structured fluorescent mesoporous silica nanoparticles (FMSNs) are produced in a sol-gel method with the introduction of a phosphonate functional group. It is found that the phosphonate functionalized FMSNs with the foam structure minimizes the aggregation of FMSNs in solution. The average particle size of the FMSNs without and with phosphonate functionalization is 46.3 ± 5 nm and 60.5 ± 8 nm in diameter, respectively. The latter one exhibits higher fluorophore loading capacity (~67 ± 2.5%). The excitation wavelength (λ(ex)) of FMSNs is observed at 526 nm, approximate 12 nm larger in the Stoke-shift compared to the free organic dye at 494/514 nm. Furthermore, the photostability of the hydrophobic fluorophore is greatly improved by the FMSNs with the foam structure. In addition, the dose-dependent nature of FMSN uptake is assessed for the immune cells, the bone marrow-derived dendritic immune cells (BMDCs). Our results indicate that approximately 42% of BMDCs are able to take up foam-structured FMSNs (>5 μg/ml) without decreasing the viability of BMDCs. Thus, the phosphonate functionalized FMSNs with the foam structure are suitable to be used for many biomedical applications, especially in cell tracking.