Monomer-isomerization polymerization. XI. Monomer-isomerization copolymerizations of 2-butene with 2-pentene and 2-hexene with Ziegler-Natta catalyst

2-Pentene and 2-hexene were found to undergo monomer-isomerization copolymerizations with 2-butene by Al(C₂H₅)₃–VCl₃ and Al(C₂H₅)₃–TiCl₃ catalysts in the presence of nickel dimethylglyoxime or transition metal acetylacetonates to yield copolymers consisting of the respective 1-olefin units. For comparison, the copolymerizations of 1-pentene with 1-butene and 1-hexene with 1-butene by Al(C₂H₅)₃–VCl₃ catalyst were also attempted. The compositions of the copolymers obtained from these copolymerizations were determined by using the calibration curves between the compositions of the respective homopolymer mixtures and the values of D₇₆₆/D₁₃₈₀ in the infrared spectra. The monomer reactivity ratios for the monomer-isomerization copolymerizations of 2-butene (M₁) with 2-pentene and 2-hexene, in which the concentrations of both 1-olefins calculated from the observed isomer distribution were used as those in the monomer feed mixture, and for the ordinary copolymerizations of 1-butene (M₁) with 1-pentene and 1-hexene by Al(C₂H₅)₃-VCl₃ catalyst were determined as follows: 2-butene (M₁)/2-pentene (M₂): r₁ = 0.14, r₂ = 0.99; 1-butene (M₁)/1-pentene (M₂): r₁ = 0.30, r₂ = 0.74; 2-butene (M₁)/2-hexene (M₂): r₁ = 0.11, r₂ = 0.62; 1-butene (M₁)/1-hexene (M₂): r₁ = 0.13, r₂ = 0.90.     

Komplexe von FeI2 und FeI3 mit Tetramethylharnstoff

Complexes of FeI₂ and FeI₃ with Tetramethylurea [FeI₂(OC(NMe₂)₂)₂] ( 1 , [Fe₂I₄(OC(NMe₂)₂)₂] ( 2 ), and [FeI₃(OC(NMe₂)₂] ( 3 ) were prepared by the reaction of FeI₂ and FeI₂/iodine, respectively, with tetramethylurea. The structures of 1 and 3 were determined from single crystal X-ray diffraction data. 1 crystallizes in the triclinic space group P1 , with a = 809.9(1), b = 923.2(1), c = 1 374.6(1) pm, α = 106.80(1), β = 90.47(1), γ = 101.55(1)°; Z = 2; R = 0.045., 3 : monoclinic, P2₁/c, a = 1 311.4(1), b = 783.3(1), c = 1 409.1(1) pm, β = 97.36(1)°; Z = 4; R = 0.047. 1 and 3 are isolated neutral complexes with distorted tetrahedral coordination of iron. 3 is the first FeI₃-complex with an O-donor ligand. The IR-spectra exhibit strong shifts of n?C = O and n?_asC—N of tetramethylurea especially on coordinating to FeI₃.     

Vitamin K1 distribution following intravenous vitamin K1–fat emulsion administration in rats

This study investigated vitamin K₁ (VK₁) distribution following intravenous vitamin K₁–fat emulsion (VK₁–FE) administration and compared it with that after VK₁ injection. Rats were intravenously injected with VK₁–FE or VK₁. The organ and tissue VK₁ concentrations were determined using high‐performance liquid chromatography method at 0.5, 2 and 4 h to determine distribution, equilibrium and elimination phases, respectively. In the VK₁–FE group, the plasma, heart and spleen VK₁ concentrations decreased over time. However, other organs like liver, lung, kidney, muscle and testis, reached peak VK₁ concentrations at 2 h. In the VK₁ injection group, the liver VK₁ concentrations were significantly higher than those in other organs at the three time points. However, VK₁ concentrations in the other organs peaked at 2 h. In addition, in VK₁–FE group, the heart, spleen and lung VK₁ concentrations were significantly higher than those in the VK₁ injection group at the three time points, and the liver VK₁ concentration was significantly higher than that in the VK₁ injection group at 4 h. The VK₁ amount was greatest in the liver compared with the other organs. Thus, the liver is the primary organ for VK₁ distribution. The distribution of VK₁ is more rapid when injected as VK₁–FE than as VK₁. Copyright © 2015 John Wiley & Sons, Ltd.     

The electronic structure of molecules by a many-body approach: V. Ionization potentials and one-electron properties of cyclopentadiene and 1-sila-cyclopentadiene-(2,4)

The valence ionization potentials (IP's) of cyclopentadiene and 1-sila-cyclopentadiene-(2,4) are studied by an ab initio many-body approach which includes the effect of electron correlation and reorganization beyond the Hartree-Fock approximation. The Hartree-Fock approximation gives the correct ordering of the IP's for cyclopentadiene but this ordering does not agree with the results of the previous experimental and theoretical studies. The ordering is 1a₂(π), 2b₁(π), 4b₂, 6a₁, 5a₁, 3b₂, 1b₁ (π), 4a₁, 2b₂, 3a₁. For sila-cyclopentadiene the ordering of the IP's is: 1a₂(π), 4b₂, 2b₁(π), 6a₁, 1b₁(π), 5a₁, 3b₂, 4a₁, 3a₁, 2b₂. The Hartree-Fock approximation is found to be incorrect with respect to the ordering of the 4b₂ and 2b₁(π) IP's. A number of one-electron properties are calculated in the one-particle approximation and compared with the available experimental data.     

Synthese und Kristallstrukturen der Phosphaniminato-Komplexe [AlCl2(NPEt3)]2, [GaI2(NPEt3)]2 und [GaI2(NPPh3)]2

Synthesis and Crystal Structures of the Phosphoraneiminato Complexes [AlCl₂(NPEt₃)]₂, [GaI₂(NPEt₃)]₂, and [GaI₂(NPPh₃)]₂ [AlCl₂(NPEt₃)]₂ ( 1 ) is made according to the known method by reaction of aluminium trichloride with the silylated phosphaneimine Me₃SiNPEt₃ in acetonitrile; it is isolated as colourless, moisture sensitive crystals. The phosphoraneiminato complexes [GaI₂(NPEt₃)]₂ ( 2 ) and [GaI₂(NPPh₃)]₂ ( 3 ), on the other hand, are obtained by redox reactions as pale yellow crystals; ( 2 ) of “gallium(I) iodide” with Me₃SiNPEt₃ in toluene and ( 3 ) of gallium with N-iodine triphenylphosphaneimine, INPPh₃, in tetrahydrofuran. 1 and 3 are characterized spectroscopically and by crystal structure determinations; 2 is characterized only crystallographically. 1 : Space group Pbca, Z = 4; lattice dimensions at –70 °C: a = 1232.6(2), b = 1341.1(2), c = 1393.4(3) pm, R₁ = 0.0315. 1 forms centrosymmetric molecules in which the Al atoms are linked via Al–N bonds of the two (NPEt₃^–) groups; with 185.0 and 184.4 pm these bonds are of almost the same lengths. 2 : Space group Pbca, Z = 4; lattice dimensions at –80 °C: a = 1380.0(1), b = 1311.0(1), c = 1429.1(1) pm, R₁ = 0.0273. 2 crystallizes isotypically with 1 . The gallium atoms of the centrosymmetric Ga₂N₂ four-membered ring are connected with Ga–N distances of equal length (190.9 pm). 3 · THF: Space group P2₁2₁2₁, Z = 2; lattice dimensions at –140 °C: a = 1494.6(1), b = 1536.3(1), c = 974.6(1) pm, R₁ = 0.0382. 3 forms dimeric molecules in which the gallium atoms are linked via the N atoms of the (NPPh₃^–) groups to form a non-planar Ga₂N₂ four-membered ring of C₂ symmetry with Ga–N bonds of equal lengths – within standard deviations – of 194.7 pm. The phosphoraneiminato groups are arranged in a synperiplanar way.     

Synthese und Struktur von (PPh4)3[Re2NCl10]

Synthesis and Crystal Structure of (PPh₄)₃[Re₂NCl₁₀] The rhenium(V) nitrido complex (PPh₄)₃[Re₂NCl₁₀] ( 1 ) is obtained from the reaction of (PPh₄)[ReNCl₄] with 1, 3‐dioxan‐(2‐ylmethyl)diphenyl phosphine in CH₂Cl₂/CH₃CN in form of orange red crystals with the composition 1 ·2CH₂Cl₂ crystallizing in the triclinic space group P1¯ with a = 1210.7(2), b = 1232.5(1), c = 2756.3(5) pm, α = 99.68(1)°, β = 100.24(1)°, γ = 98.59(1)° and Z = 2. The crystal structure contains two symmetry independent, centrosymmetrical complex anions [Re₂NCl₁₀]^3‐ with a symmetrical nitrido bridge Re=N=Re and distances Re(1) ‐ N(1) = 181.34(5) and Re(2) ‐ N(2) = 181.51(4) pm.     

Thermodynamics of metal-ligand bond formation: XVI. Base adducts of some organotin compounds

Thermodynamic data have been obtained by calorimetric titration in benzene solution at 30° for reaction of organotin compounds with Lewis bases; data are reported for forty acid/base systems.Ph₃SnCl forms $\text{1}\text{1}$ adducts of low stability with pyridine (py) or 4-methyl-pyridine (4-mepy). Ph₂SnCl₂, Me₂SnCl₂, Bu₂SnCl₂ and Bu₂Sn(NCS)₂ form simultaneously $\text{1}\text{1}$ and $\text{1}\text{2}$ adducts with py or 4-mepy and $\text{1}\text{1}$ adducts with 2,2′-bipyridine or 1,10-phenanthroline (phen); the enthalpies of formation of the phen adducts are similar to those of $\text{1}\text{2}$ adducts with 4-mepy. With BuSnCl₃ and PhSnCl₃ it was not possible to obtain data for each step in addition of pyridine or 4-mepy. Adduct stabilities increase with increasing chloride substitution and in the order Bu < Me < Ph; adducts of Bu₂Sn(NCS)₂ are more stable than those of Bu₂SnCl₂.Tributylphosphine does not react with Ph₃SnCl but gives $\text{1}\text{1}$ adducts with the other tin compounds; only PhSnCl₃ adds a second molecule of this base. The $\text{1}\text{1}$ adducts are more stable than those with heterocyclic bases. Tributylamine brings about disproportionation of the compounds R₂SnX₂ to R₄Sn and SnX₄NBu₃.     

Synthese und Struktur von [(Ph3PAu)6Co(CO)2](PF6) und [(Ph3PAu)7Co(CO)2](PF6)2

Synthesis and Structure of [(Ph₃PAu)₆Co(CO)₂](PF₆) and [(Ph₃PAu)₇Co(CO)₂](PF₆)₂ By the reaction of (Ph₃PAu)₄Co[(CO)₃]⁺ with OH^? in the presence of excess Ph₃PAuCl the larger cluster cations [(Ph₃PAu)₆Co(CO)₂]⁺ ( 1 ) and [(Ph₃PAu)₇Co(CO)₂]²⁺ ( 2 ) can be built up with 1 being the main product. 1 crystallizes with PF^?₆ as counterion in the monoclinic space group C2/c with a = 3008.3(6); b = 1339.1(2); c = 2909.4(6) pm; β = 103.08(1)°; Z = 4. The inner core of the cluster cation 1 with the symmetry C₂ has the form of a bicapped trigonal bipyramid with the heteroatom in equatorial position, and distances Au? Au between 280.4(1) and 288.4(1) pm and Co? Au between 254.9(1) and 257.1(2) pm. 2 · (PF₆)₂ crystallizes in the triclinic space group P1 with a = 2155.7(1); b = 1720.6(1); c = 3543.6(1) pm; α = 91.89(1)°; β = 97.51(1); γ = 89.92(1)°; Z = 4. The unit cell contains two symmetry independent cluster cations 2 of about the same geometry. The cluster skeleton Au₇Co can be described as fragment of an icosahedron formed by seven gold atoms with the Co atom in its center. The Au? Au distances range from 274.8(3) to 332.6(3) pm, and the Co? Au distances are 256.8(6) to 264.7(5) pm. The bonding in 1 and 2 is discussed.     

Preparation and characterization of arsine derivatives: X-ray crystal structures of As (SitBuMe2)3, As (SiMe3)2(SiPh3), Et3Ga · As(SiMe3)2(SiPh3), and As(SePh)3

As(Si¹BuMe₂)₃ (1) was prepared by the salt-elimination reaction between (Na/K)₃As and ¹BuMe₂SiCl. Mixing LiAs(SiMe₃)₂ with Ph₃SiCl (1:1) yielded As(SiMe₃)₂(SiPh₃) (2) in a good crystalline yield. Reaction of 2 (1:1) with Et₃Ga gave the expected Lewis acid-base adduct Et₃Ga · As(SiMe₃)₂(SiPh₃) (3). The 1:1 mole ratio reaction of In(SePh)₃ with As(SiMe₃)₃ resulted in a ligand redistribution around the indium and arsenic centers to afford As(SePh)₃ (4) in a low yield. The solid-state structures of 1–4 have been established by single-crystal X-ray analysis. Crystal data for 1, monoclinic space group P 2₁/c, with a = 11.112(2), b = 17.453(2), c = 14.199(2) Å, β = 114.89° for Z = 4; 2, orthorhombic space group P c2₁n, with a = 9.236(1), b = 16.612(2), c = 16.803(4) Å for Z = 4; 3, monoclinic space group P 2₁/c, with a = 16.799(1), b = 11.199(2), c = 19.413(3) Å, β = 112.22(1) for Z = 4; 4, trigonal space group R &3macr;, with a = 12.863(5), c = 18.96(1) Å for Z = 6. © 1996 John Wiley & Sons, Inc.     

From crystalline boryl-substituted and boryl-coupled 2,2,4,4,6,6-hexamethyl-cyclotrisilazanes to β-SiC and BN

[Me₂SiNBFN(SiMe₃)₂]₃ (1) is synthesized in the reaction of trilithiated hexamethylcyclotrisilazane with F₂BN(SiMe₃)₂. The mono- and dilithium derivatives of the six-membered ring (Me₂SiNH)₂ Me₂SiNSiFMe₂ react with the F₂B-substituted cyclotrisilazane F₂B(NSiMe₂)₃(SiFMe₂)₂ in the molar ratio 1:1 or 1:2 to give the BF-coupled rings 2 and 3. The crystal structure analysis of 1 and 3 and pyrolysis of 1 and 3 with formation of silicon boron carbonitride and its crystallisation to composite powders at very high temperatures are reported.     

Single-Atom or Dual-Atom in TiO2 Nanosheet: Which is the Better Choice for Electrocatalytic Urea Synthesis?

As rising star materials, single-atom and dual-atom catalysts have been widely reported in the electro-catalysis area. To answer the key question: single-atom and dual-atom catalysts, which is better for electrocatalytic urea synthesis? we design two types of catalysts via a vacancy-anchorage strategy: single-atom Pd₁−TiO₂ and dual-atom Pd₁Cu₁−TiO₂ nanosheets. An ultrahigh urea activity of 166.67 mol_urea mol_Pd⁻¹ h¹ with the corresponding 22.54 % Faradaic efficiency at −0.5 V vs. reversible hydrogen electrode (RHE) is achieved over Pd₁Cu₁−TiO₂, which is much higher than that of Pd₁−TiO₂. Various characterization including an in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and theoretical calculations demonstrate that dual-atom Pd₁Cu₁ site in Pd₁Cu₁−TiO₂ is more favorable for producing urea, which experiences a C−N coupling pathway with a lower energy barrier compared with Pd₁ in Pd₁−TiO₂.     

Syntheses and X‐Ray Crystal Structures of New Copper(I) and Silver(I) Complexes containing Thione Ligands

The reaction of [(Ph₃P)₂CuCl]₂ with 4‐amino‐6‐methyl‐1,2,4‐triazine‐thione‐5‐one (AMTTO, 1 ) in methanol and further recrystallization from methanol/acetone solution gives [(C₄H₄N₃SON(=CMe₂)Cu(PPh₃)₂Cl] ( 2 ) as a neutral complex. [(C₄H₄N₃SON(=CMe₂)Ag(PPh₃)₂]NO₃ ( 4 ) can be obtained in excellent yield by the reaction of [(AMTTO)₂Ag]NO₃ ( 3 ) with triphenylphosphane in methanol/acetone. Both complexes were characterized by infrared spectroscopy, elemental analyses as well as by X‐ray diffraction studies. Crystal data for 2 at –80 °C: space group P1 with a = 1233.8(1), b = 1389.7(1), c = 1417.1(1) pm, α = 89.36(1)°; β = 65.10(1)°, γ = 65.95(1)°, Z = 2, R₁ = 0.0582 and for 4 at –80 °C: space group P1, with a = 1193.3(1), b = 1308.5(1), c = 1385.3(1) pm, α = 94.69(1)°, β = 109.14(1)°, γ = 93.42(1)°, Z = 2, R₁ = 0.0716.     

The two-photon spectrum of toluene vapor

The two-photon excitation spectrum of toluene-h₈ and toluene-d₈ vapor has been recorded under low resolution (1 cm^?1) in the region of the S₁ ← S₀ (¹B₂ ← ¹A₁) transition. Although the electronic transition is formally allowed in two-photon spectroscopy, a large fraction of intensity exists in a subsystem induced by the out-of-phase CC stretching vibration ν₁₄ (b₂). Band contours associated with each of the two assigned tensor components of the transition are identified and partially analyzed by comparison with the two-photon contours of fluorobenzene.     

Determination of aflatoxins B1, B2, G1 and G2 by high-performance liquid chromatography with electrochemical detection

A new approach to the determination of afiatoxins B₁, B₂, G₁ and G₂ is given; the method involves high-performance liquid chromatography with amperometric detection in the differential-pulse mode at the dropping mercury electrode with 1-s drop time. These aflatoxins can be determined simultaneously with good resolution but with some compromise in sensitivity. The detection limit of underivatized aflatoxin standards is around 5 ng. Average recoveries of aflatoxins from peanut butter by the Beebe method were G₂ 81%, G₁ 87%, B₂ 77% and B₁ 76%.     

Synthese und Koordinationsverhalten von (Ph3SnO)3As. Die Kristallstrukturen von (Ph3SnO)3As und [{(Ph3SnO)3As}Fe(CO)4]

Synthesis and Coordination Behaviour of (Ph₃SnO)₃As. The Crystal Structures of (Ph₃SnO)₃As and [{(Ph₃SnO)₃As}Fe(CO)₄] (Ph₃SnO)₃As ( 1 ) was obtained from the reaction of Ph₃SnOH with As₂O₃ in a dichloromethane/water mixture as solvent. Upon recrystallization from DMF 1 forms orthorhombic crystals, space group P2₁2₁2₁, with a = 977.3(2), b = 1903.5(3) and c = 2600.9(5) pm (at 220 K). In 1 the As atom is bound to three OSnPh₃ groups with As–O distances of 171.9(3)–174.9(3) pm. Reaction of 1 with Fe₂(CO)₉ gives [{(Ph₃SnO)₃As}Fe(CO)₄] ( 2 ). 2 crystallizes monoclinic, space group P2₁/n with a = 2242.3(5), b = 1112.6(2), c = 2353.0(5) pm and β = 111,46(2)° (at 220 K). In 2 the iron atom exhibits a trigonal bipyramidal coordination with the (Ph₃SnO)₃As ligand in an axial position. The Fe–As bond length is 230.5(1) pm.     

Synthesis,Characterization, and Structures of Palladium(II) and Platinum(II) Complexes Containing N,N‐Bis(diphenylphos­phanyl)Naphthylamine

The reaction of 1‐naphthylamine with two equivalents of chlorodiphenylphosphine in the presence of triethylamine gave the ligand C₁₀H₇‐1‐N(PPh₂)₂ ( 1 ). Reaction of 1 with PdCl₂(CH₃CN)₂ or PtCl₂(cod) (1:1 molar ratio) afforded the complexes cis‐[PdCl₂{C₁₀H₇‐1‐N(PPh₂)₂}] ( 2 ) and cis‐[PtCl₂{C₁₀H₇‐1‐N(PPh₂)₂}] ( 3 ), respectively. Compounds 1 – 3 were identified and characterized by multinuclear NMR (¹H, ¹³C, ³¹P NMR) and IR spectroscopy. Crystal structure determinations of complexes 2 and 3 were carried out.     

Water Reduction and Dihydrogen Addition in Aqueous Conditions With ansa-Phosphinoborane

Ortho-phenylene-bridged phosphinoborane (2,6-Cl₂Ph)₂B-C₆H₄-PCy₂ 1 was synthesized in three steps from commercially available starting materials. 1 reacts with H₂ or H₂O under mild conditions to form corresponding zwitterionic phosphonium borates 1-H₂ or 1-H₂O . NMR studies revealed both reactions to be remarkably reversible. Thus, when exposed to H₂, 1-H₂O partially converts to 1-H₂ even in the presence of multiple equivalents of water in the solution. The addition of parahydrogen to 1 leads to nuclear spin hyperpolarization both in dry and hydrous solvents, confirming the dissociation of 1-H₂O to free 1 . These observations were supported by computational studies indicating that the formation of 1-H₂ and 1-H₂O from 1 are thermodynamically favored. Unexpectedly, 1-H₂O can release molecular hydrogen to form phosphine oxide 1-O . Kinetic, mechanistic, and computational (DFT) studies were used to elucidate the unique “umpolung” water reduction mechanism.     

Crystal Structures and Spectral Studies of [Ph3Sn(O2AsMe2)], [Bu2ClSn(O2AsMe2)] and [PhClSn(O2AsMe2)(μ‐OMe)]2

[Ph₃Sn(O₂AsMe₂)] ( 1 ) and [PhClSn(O₂AsMe₂)(μ‐OMe)]₂ ( 3 ) have been synthesized by treatment of Ph₃SnCl and Ph₂SnCl₂ with Na(O₂AsMe₂) in methanol, respectively. [Bu₂ClSn(O₂AsMe₂)] ( 2 ) has been prepared by the reaction of Bu₂SnCl₂ with HO₂AsMe₂ in methanol. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/n with a = 699.8(1), b = 1961.4(2), c = 1433.6(2) pm, β = 95.17(1)°, and Z = 4. 2 also crystallizes monoclinic in the space group P2₁/m, the cell parameters being a = 480.6(1), b = 1992.7(2), c = 808.8(1) pm, β = 103.726(5)°, and Z = 2. Both compounds form infinite chains with alternating (Me₂AsO₂)^? and (R₃Sn)⁺ or (R₂ClSn)⁺ units. The dimer 3 consists of 8‐membered (OSnOAs)₂ rings in which the tin atoms are bridged by methanolate bridges. It crystallizes triclinic in the space group with a = 822.8(2), b = 910.4(2), c = 929.2(2) pm, α = 77.04(3)°, β = 82.35(3)°, γ = 68.69(3)°, and Z = 1 for the dimer. The vibrational and mass spectra of 1 , 2 and 3 are given and discussed.     

Spinelle mit substituierten Nichtmetallteilgittern. IV. Rötgenographische Untersuchung der Systeme CuCr2(S1−xSex)4 und CuCr2(Se1−xTex)4

Spinels with substituted Nonmetal Sublattices. IV. CuCr₂(S_1?xSe_x)₄ and CuCr₂(Se_1?xTe_x)₄ Polycrystalline samples of the spinel system CuCr₂(S_1?xSe_x)₄ have been prepared with 0 ≤ x ≤ 1. We found that in the spinel system CuCr₂(Se_1?xTe_x)₄ no solid solution is existent in the range 0.01 ≤ x ≤ 0.70. When S is substituted by Se and Se by Te the lattice constants increase linearely by 0.52 Å and 0.81 Å respectively. The anion-sublattice shows random distribution of the chalcogen atoms, the chalcogen parameters u are constant in the system CuCr₂(S_1?xSe_x)₄ with a mean value of u = 0.382₉. The calculated anion-cation-distances lead to a covalent tetrahedral radius r_Cu = 1.23 Å. This radius is in agreement with the radius r_Cu = 1.22 Å of Cu spinels with Cu in the valence +1.     

Orientation dependence in collision induced electronic relaxation studied through van der Waals complexes with isomeric structures

Weakly bound molecular complexes with more than one well-defined structures provide us with an unique opportunity to investigate dynamic processes induced by intermolecular interactions with specific orientations. The relative orientation of the two interacting molecules or atoms is defined by the complex structure. The effect of the orientation in the spin changing collisions glyoxal(S₁)+Ar → glyoxal(T₁)+Ar and acetylene (S₁)+Ar → acetylene(T)+Ar have been studied by measuring the intersystem crossing (ISC) rates of the glyoxal(S₁)·Ar and acetylene(S₁)·Ar complexes with different isomeric structures. Results show that there is a strong orientation dependence in the ISC of glyoxal(S₁) induced by interaction with the Ar atom: the Ar atom positioned in the molecular plane is much more effective than in the out-of-plane position in inducing the S₁ → T₁ transition of glyoxal. On the other hand, studies of acetylene(S₁)·Ar complexes indicate that the Ar-induced ISC rates are nearly identical for the in-plane and out-of-plane positions. Orientation dependence in the collision induced vibrational relaxation process C₂H₂(S₁,v _i )+Ar → C₂H₂(S₁,v _f <v _i )+Ar is also studied by measuring the vibrational predissociation rates of the acetylene(S₁)·Ar complex isomers. The results indicate that collisions of C₂H₂(S₁,v ₃=3, 4) with Ar at two orthogonal orientations are equally effective in causing vibrational relaxation of C₂H₂.