Magnetophoresis behaviour at low gradient magnetic field and size control of nickel single core nanobeads

Magnetic separation of organic compounds, proteins, nucleic acids and other biomolecules, and cells from complex reaction mixtures is becoming the most suitable solution for large production in bioindustrial purification and extraction processes. Optimal magnetic properties can be achieved by the use of metals. However, they are extremely sensitive to oxidation and degradation under atmospheric conditions. In this work Ni nanoparticles are synthesised by conventional solution reduction process with the addition of a non-ionic surfactant as a surface agent. The nanoparticles were surfacted in citric acid and then coated with silica to form single core Ni nanobeads. A magnetophoresis study at different magnetic field gradients and at the different steps of synthesis route was performed using Horizontal Low Gradient Magnetic Field (HLGMF) systems. The reversible aggregation times are reduced to a few seconds, allowing a very fast separation process.     

Synthesis and characterization of superparamagnetic nanoparticles coated with fluorescent gold nanoclusters

Multifunctional nanoparticles (NPs) combining the superparamagnetism of Mn−Zn ferrite and the fluorescence property of gold nanoclusters (NCs) have been prepared by wet chemistry. Magnetic NPs synthesized by co-precipitation method were coated several times with oppositely charged polyelectrolytes (PEs) using the layer-by-layer technique. Common techniques (Fourier transform infrared spectroscopy, electron microscopy, zeta potential, etc.) indicated the monodispersity and the stability of the coated NPs providing a positive charged surface. Fluorescent gold NCs bound to a standard protein bovine serum albumin were adsorbed on the surface of the magnetic NPs. Structural investigations proved the presence of small gold clusters (~2 nm) in a shell surrounding the magnetic nanomaterial. The stable nanocomposite kept the original fluorescence property of the metal clusters with 211-fold increase of the red emission (λ = 690 nm) compared to the uncoated NPs. These NPs can be moved with a permanent magnet despite a 72-wt% increase of the non-magnetic fraction due to the PE coating and the protein adsorption.     

Optical,structural, and antibacterial properties of biosynthesized Ag nanoparticles at room temperature using Azadirachta indica leaf extract

We report an enhancement of antibacterial properties of Ag nanoparticles (NPs) synthesized at room temperature using leaf extract of Azadirachta indica (Neem) following green synthesis route. To study such antibacterial properties Ag NPs of sizes within 9 nm to 17 nm were synthesized by varying the concentration of Neam leaf extract (NLE). The NP size and size distribution were seen to increase and decrease, respectively, with increase in NLE concentration. Also Ag NPs having a fixed size (~26 nm) was also synthesized by varying the precursor (AgNO₃) concentration. It is noticed that concentration of NLE has significant effects on the control of NP size as well as size distribution whereas there is almost no role of precursor concentration of the NP size. All the Ag NPs are found to have face-centred-cubic crystal structure with preferential growth along (111) plane which is stable one. The peak of X-ray diffraction at ~32.4° (2θ value), which is prominent for low concentrations of NLE and precursor, is identified as (101) plane of Ag crystal. The generation and growth of Ag NPs had also been confirmed using electron microscopic studies. These Ag NPs show prominent surface plasmon resonance (SPR) absorption at ~ 420 nm confirming again the genesis of Ag NPs. The SPR peak shifts towards longer wavelength (redshift) with a corresponding reduction in full width at half maximum with increase in NP size. All of the samples containing Ag NPs show a broad blue photoluminescence (PL) emission at ~ 471 nm. Emission peak is seen to redshift with increase in NP size and is consistent with the optical absorption data. Such PL emission is argued as due to interband transition or plasmon luminescence. Being biocompatible of the green synthesis process, antibacterial properties of these Ag NPs were studies in details considering all the samples (with varied NP size for one set and with fixed NP size for other set of samples). As per our knowledge this is the first report of size related total study of Ag NPs, showing increased antibacterial effect as size decreased and equal antibacterial effect as size equals. It is found that smaller Ag NPs has enhanced antibacterial effects due to large surface area to volume ratio in comparison with bigger sized Ag NPs.     

Aggregation kinetics of CeO<Subscript>2</Subscript> nanoparticles in KCl and CaCl<Subscript>2</Subscript> solutions: measurements and modeling

To characterize the environmental transport and health risks of CeO₂ nanoparticles (NPs), it is important to understand their aggregation behavior. This study investigates the aggregation kinetics of CeO₂ NPs in KCl and CaCl₂ solutions using time-resolved dynamic light scattering (TR-DLS). The initial hydrodynamic radius of CeO₂ NPs measured by DLS was approximately 95 nm. Attachment efficiencies were derived both from aggregation data and predictions based on the Derjaguin–Landau–Verwey–Overbeek (DLVO) theory. The deviations of the DLVO predictions were corrected by employing the extended DLVO (EDLVO) theory. The critical coagulation concentration (CCC) of CeO₂ NPs at pH = 5.6 is approximately 34 mM for KCl and 9.5 mM for CaCl₂. Furthermore, based on the EDLVO theory and the von Smoluchowski’s population balance equation, a model accounting for diffusion-limited aggregation (DLA) kinetics was established. For the reaction-limited aggregation (RLA) kinetics, a model that takes fractal geometry into account was established. The models fitted the experimental data well and proved to be useful for predicting the aggregation kinetics of CeO₂ NPs.     

Enhanced blue photoluminescence and new crystallinity of Ag/organic rubrene core-shell nanoparticles through hydrothermal treatment

Light-emitting organic semiconductors have attracted considerable attention for the nanoscale fabrication of organic-based displays and their potential application in optoelectronics, plasmonics, and photonics. In this study, core-shell hybrid nanostructures of organic rubrene coated on Ag nanoparticles (NPs) have been synthesized using a chemical reduction method. The thickness of the rubrene shell was 2.6–6.0 nm and the diameter of the Ag core was 30–70 nm. The optical and structural properties of the Ag/rubrene core-shell NPs were tuned by hydrothermal (HT) treatment at 190 °C. The Ag/rubrene core-shell NPs were characterized by high-resolution transmission electron microscopy and energy-dispersive X-ray (EDX) spectroscopy before and after the HT treatment, and their structural properties were confirmed through X-ray diffraction (XRD) analysis. XRD peaks related to an orthorhombic phase were observed along with the original triclinic crystal structure of the rubrene shell, and the triclinic crystal domain size increased from 28.2 nm to 30.8 nm owing to the HT treatment. Interestingly, the green light emission (λ_em = 550 nm) of the Ag/rubrene core-shell NPs changed to blue light emission (λ_em = 425 nm), increasing in intensity through the HT treatment. This is caused by the crystal change with H-type aggregation and enhanced energy transfer from a surface plasmon resonance.     

Ultrasound-assisted surface treatment of ZrO2 with BSA and incorporating in PVC to improve the properties of the obtained nanocomposites: Fabrication and characterization

This paper describes the preparation of poly(vinyl chloride) (PVC) nanocomposites (NCs) reinforced with modified zirconia (ZrO₂) nanoparticles (NPs). The ZrO₂ NPs were defined as efficient filler for PVC NCs. For achieving the best dispersion and improvement of properties, the surface of ZrO₂ NPs was modified by Bovine Serum Albumin (BSA). Carboxylic acids and amines are important functional groups of BSA which handle the grafting BSA on the surface of ZrO₂ NPs. The PVC/ZrO₂-BSA NCs were fabricated by incorporation of various amounts of the ZrO₂-BSA NPs (3, 6 and 9 wt%) into PVC matrix. All the above processes were accomplished by ultrasonication as a green and environmentally-friendly method. Also, the magnetic and mechanical stirrer was used for the preparation of samples but the results are not suitable and the aggregation was observed which indicated the use of ultrasonic irradiation is the best method for the preparation of NC. The products were characterized by Fourier transform infrared spectroscopy, Transmission electron microscopy, Field emission scanning electron microscopy, X-ray diffraction, Thermogravimetric analysis, Ultraviolet–visible spectroscopy, photoluminescence spectroscopy, energy dispersive X-ray spectroscopy, wettability, and mechanical tests. The achieved PVC/ZrO₂-BSA NCs showed high thermal stability, good mechanical, optical and wettability properties compared to the pure PVC. In addition, among the obtained NCs, the PVC/ZrO₂-BSA NC 6 wt% showed the best improvement.     

Coarsening phenomena of metal nanoparticles and the influence of the support pre-treatment: Pt/TiO2(110)

One of the technologically most important requirements for the application of oxide-supported metal nanoparticles (NPs) in the fields of molecular electronics, plasmonics, and catalysis is the achievement of thermally stable systems. For this purpose, a thorough understanding of the different pathways underlying thermally-driven coarsening phenomena, and the effect of the nanoparticle synthesis method, support morphology, and degree of support reduction on NP sintering is needed. In this study, the sintering of supported metal NPs has been monitored via scanning tunneling microscopy combined with simulations following the Ostwald ripening and diffusion-coalescence models. Modifications were introduced to the diffusion-coalescence model to incorporate the correct temperature dependence and energetics. Such methods were applied to describe coarsening phenomena of physical-vapor deposited (PVD) and micellar Pt NPs supported on TiO₂(110). The TiO₂(110) substrates were exposed to different pre-treatments, leading to reduced, oxidized and polymer-modified TiO₂ surfaces. Such pre-treatments were found to affect the coarsening behavior of the NPs.No coarsening was observed for the micellar Pt NPs, maintaining their as-prepared size of ~ 3 nm after annealing in UHV at 1060 °C. Regardless of the initial substrate pre-treatment, the average size of the PVD-grown NPs was found to increase after identical thermal cycles, namely, from 0.5 ± 0.2 nm to 1.0 ± 0.3 nm for pristine TiO₂, and from 0.8 ± 0.3 nm to 1.3 ± 0.6 nm for polymer-coated TiO₂ after identical thermal treatments. Although no direct real-time in situ microscopic evidence is available to determine the dominant coarsening mechanism of the PVD NPs unequivocally, our simulations following the diffusion-coalescence coarsening route were in significantly better agreement with the experimental data as compared to those based on the Ostwald-ripening model. The enhanced thermal stability of the micellar NPs as compared to the PVD clusters might be related to their initial larger NP size, narrower size distribution, and larger interparticle distances.     

Synthesis of composite gold/tin-oxide nanoparticles by nano-soldering

Composite Au–SnO₂ nanoparticles (NPs) are synthesized by nano-soldering of pure Au and SnO₂ NPs. The multi-step process involves synthesis of pure Au and SnO₂ NPs separately by nanosecond pulse laser ablation of pure gold and pure tin targets in deionized water and post-ablation laser heating of mixed solution of Au colloidal and SnO₂ colloidal to form nanocomposite. Transmission Electron Microscopy (TEM) and High-Resolution Transmission Electron Microscopy (HRTEM) were used to study the effect of laser irradiation time on morphology of the composite Au–SnO₂ NPs. The spherical particles of 4 nm mean size were obtained for 5 min of post-laser heating. Increased mean size and elongated particles were observed on further laser heating. UV–vis spectra of Au–SnO₂ nanocomposites show red shift in the plasmon resonance absorption peak and line shape broadening with respect to pure Au NPs. The negative binding energy shift of Au 4f_7/2 peak observed in X-ray Photoelectron Spectra (XPS) indicates charge transfer in the nano-soldered Au–SnO₂ between gold and tin oxide and formation of soldered nanocomposite.     

Rapid oxidation of InP nanoparticles in air

InP nanoparticles (NPs) in the size range of 1.5-3 nm were synthesized using colloidal chemistry methods. Exposure of these NPs to air resulted in rapid oxidation, as shown by transmission electron microscopy. Diffraction and spectroscopic measurements confirmed the formation of In₂O₃. Similar behavior was observed for commercial InP NPs, even when capped with a ZnS shell. Photoluminescence studies suggest that the oxidation occurs even while InP NPs are still dispersed in hexane, albeit at a much slower rate.     

A sonochemical assisted synthesis of hollow sphere structured tin (IV) oxide on graphene oxide sheets for the low-level detection of environmental pollutant mercury in biological samples and foodstuffs

In modern approaches for nanomaterials synthesis, ultrasonication plays an important role in providing the larger surface area and smaller crystalline size properties that are favorable to electrochemical techniques. Herein, we report the tin (IV) oxide on graphene oxide nanoparticles were synthesized (SnO₂@GO NPs) by ultrasonic methodology (UZ SONOPULS HD 3400 Ultrasonic homogenizer) with the total power of 400 W and the (frequency of 20 kHz; 140 W/dm³). The formation of as-prepared SnO₂@GO NPs and its surface morphology were scrutinized over XRD, XPS, TEM, and FESEM. Besides, the sonochemically prepared SnO₂@GO NPs were employed for the determination of environmental hazardous mercury (Hg). As a result, the modified electrode acquired a very low-level detection limit of 1.2 nM with a wider range of 0.01–10.41-µM and 14.52–225.4-µM for the detection of Hg. Finally, the practical applicability of SnO₂@GO NPs in spiked human blood serum and tuna fish samples shows appreciable found and recovery values..     

One-pot hydrothermal synthesis of an assembly of magnetite nanoneedles on a scaffold of cyclic-diphenylalanine nanorods

The assembly of metal oxide nanoparticles (NPs) on a biomolecular template by a one-pot hydrothermal synthesis method is achieved for the first time. Magnetite (Fe₃O₄) nanoneedles (length: ~100 nm; width: ~10 nm) were assembled on cyclic-diphenylalanine (cFF) nanorods (length: 2–10 μm; width: 200 nm). The Fe₃O₄ nanoneedles and cFF nanorods were simultaneously synthesized from FeSO₄ and l-phenylalanine by hydrothermal synthesis (220 °C and 22 MPa), respectively. The samples were analyzed by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (IR), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) magnetometry. Experimental results indicate that Fe₃O₄ nanoneedles were assembled on cFF nanorods during the hydrothermal reaction. The composite contained 3.3 wt% Fe₃O₄ nanoneedles without any loss of the original magnetic properties of Fe₃O₄.     

Effect of electromagnetic field strength on Ni0.35Zn0.65Fe2O4 as performed by combustion synthesis

Ni_0.35Zn_0.65Fe₂O₄ ferrite is prepared through combustion synthesis in the external electromagnetic field. The highest magnetic field strength for the experiment is 1.1 T. Reactions temperatures were monitored by infrared radiation thermometer, the synthesized ferrite prepared in different magnetic fields is analyzed by XRD, SEM, and VSM. The results indicate that the coercivity of ferrite gradually decrease with the increase of magnetization. When the magnetic field strength is 0.54 T, the saturation magnetization is improved up to 56.05 emu/g (42%) as compared to that of ferrite in zero magnetic field. Through SEM analysis of Ni_0.35Zn_0.65Fe₂O₄ ferrite, homogeneous grains of the crystal are observed. With the increase of external magnetic field, the ferrite grain improved. This paper also systematically explores the effect of the electromagnetic field on ferrite by combustion synthesis.     

Synthesis of multiwall carbon nanotubes by chemical vapor deposition of ferrocene alone

Multiwall carbon nanotubes (MWNTs) filled with Fe nanoparticles (NPs) have been synthesized by thermal chemical vapor deposition of ferrocene alone as the precursor. The MWNTs were grown at different temperatures: 980 and 800 ^°C. Characterization of as-prepared MWNTs was done by scanning and transmission electron microscopy, and X-ray diffraction. The transmission electron microscopy study revealed that Fe NPs encapsulated in MWNTs grown at 980 and 800 ^°C are spherical and rod shaped, respectively. Room-temperature vibrating sample magnetometer studies were done on the two samples up to a field of 1 T. The magnetization versus magnetic field loop reveals that the saturation magnetization for the two samples varies considerably, almost by a factor of 4.6. This indicates that Fe is present in different amounts in the MWNTs grown at the two different temperatures.     

Superparamagnetic FePt nanoparticles as excellent MRI contrast agents

Chemically disordered face-centered cubic (fcc) FePt nanoparticles (NPs) with a mean diameter of 9 nm were synthesized via pyrolysis of iron(III) ethoxide and platinum(II) acetylacetonate. The surface ligands of these NPs were then exchanged from oleic acid to tetramethylammonium hydroxide (TMAOH) to measure the longitudinal (T₁) and transverse (T₂) proton relaxation times of aqueous dispersion of FePt NPs. Magnetic resonance relaxometry reveals that TMAOH-capped FePt NPs have a higher T₂-shortening effect than conventional superparamagnetic iron oxide NPs, indicating that fcc-phase FePt NPs might be superior negative contrast agents for magnetic resonance imaging.     

Mesoporous silica-coated superparamagnetic particles prepared by pseudomorphic transformation and their application in purification of plasmid DNA

Abstract  

Mesoporous silica-coated superparamagnetic particles were prepared via pseudomorphic transformation of pre-made amorphous silica-coated Fe₃O₄–polymer composite particles using n-cetyltrimethylammonium bromide (CTAB) and 1,3,5-trimethyl benzene (MES) as template. The mesoporous particles presented almost the same size, shape, and magnetic property as the original amorphous particles but an ordered mesoporous shell with wormhole-like pore structure. The pore size of the shells increased from 2.4 to 3.1 and 4.2 nm as the molar ratio of MES/CTAB increased from 0 to 1.0 and 1.5. DNA extraction experiments showed the mesoporous particles were qualified for purification of plasmid DNA from bacterial lysate.     

New issue of GaN nanoparticles solar cell

This study involves the synthesis of gallium nitride (GaN) nanoparticles (NPs) under different low temperatures using a simple chemical method. The nanoparticles are spin coated on Si substrate to fabricate the solar cell. The FESEM images obtained indicate the presence of cubic GaN nanoparticle with average diameter of 50 nm synthesized at 90 °C. The spin coating technique deposited n-GaN NPs/Si(111) produced a heterojunction solar cell with fill factor of 0.56 and conversion efficiency of 2.06%. Based on these results, this study proposes a novel low cost technique for the fabrication of GaN NPs solar cells.     

Studies of ion implantation conditions and magnetic properties of MnAs nanoparticles buried in GaAs substrate

We present here results obtained on the synthesis of ferromagnetic MnAs nanoclusters embedded in a GaAs matrix. These nanoclusters are formed by co-implanting Mn+As at a dose of 1×10¹⁶ ions cm⁻² for both species. MnAs nanoclusters are only synthezised after a two-step annealing process consisting in a pre-anneal at 600 °C, 60 s which favours the solid-phase epitaxy of the amorphous implanted area. The best magnetic properties have been obtained after a second annealing at 750 °C, 15 s.     

Silica-coated manganite and Mn-based ferrite nanoparticles: a comparative study focused on cytotoxicity

Magnetic oxide nanoparticles provide a fascinating tool for biological research and medicine, serving as contrast agents, magnetic carriers, and core materials of theranostic systems. Although the applications rely mostly on iron oxides, more complex oxides such as perovskite manganites may provide a much better magnetic performance. To assess the risk of their potential use, in vitro toxicity of manganite nanoparticles was thoroughly analysed and compared with another prospective system of Mn–Zn ferrite nanoparticles. Magnetic nanoparticles of La_0.63Sr_0.37MnO₃ manganite were prepared by two distinct methods, namely the molten salt synthesis and the traditional sol–gel route, whereas nanoparticles of Mn_0.61Zn_0.42Fe_1.97O₄ ferrite, selected as a comparative material, were synthesized by a new procedure under hydrothermal conditions. Magnetic cores were coated with silica and, moreover, several samples of manganite nanoparticles with different thicknesses of silica shell were prepared. The size-fractionated and purified products were analysed using transmission electron microscopy, dynamic light scattering, measurement of the zeta-potential dependence on pH, IR spectroscopy, and SQUID magnetometry. The silica-coated products with accurately determined concentration by atomic absorption spectroscopy were subjected to a robust evaluation of their cytotoxicity by four different methods, including detailed analysis of the concentration dependence of toxicity, analysis of apoptosis, and experiments on three different cell lines. The results, comparing two manganese-containing systems, clearly indicated superior properties of the Mn–Zn ferrite, whose silica-coated nanoparticles show very limited toxic effects and thus constitute a promising material for bioapplications.     

CuFe2O4 magnetic heterogeneous nanocatalyst: Low power sonochemical-coprecipitation preparation and applications in synthesis of 4H-chromene-3-carbonitrile scaffolds

The paper presents the synthesis and catalytic activity of CuFe₂O₄ nanoparticles. The CuFe₂O₄ nanoparticles have been prepared by sonochemical route under low power ultrasonic irradiation (UI) and using silent stirring at room temperature only (ST) along with co-precipitation method, without using any additive/capping agent. The synthesized magnetic nanoparticles were successfully used and compared for the synthesis of 4H-chromene-3-carbonitrile derivatives. The CuFe₂O₄ nanoparticles obtained by sonochemical route exhibit higher catalytic activity because of small size (0.5–5 nm), high surface area (214.55 m²/g), high thermal stability up to 700 °C, recyclability and reusability due to its magnetic characteristics than CuFe₂O₄ nanoparticles obtained by room temperature silent stirring. The synthesized CuFe₂O₄ nanoparticles were characterized by FT-IR, SEM–EDX, HR-TEM, XRD, TGA/DTA/DTG, BET, VSM techniques. The present method is of great interest due to its salient features such as environmentally compatible, efficient, short reaction time, chemoselectivity, high yield, cheap, moisture insensitive, green and recyclable catalyst which make it sustainable protocol.     

Ultrasonic-assisted fabrication and characterization of PVC-SiO2 nanocomposites having bovine serum albumin as a bio coupling agent

In this work, SiO₂ nanoparticles (NPs) were modified with bovine serum albumin (BSA) under ultrasound irradiations as a green and fast route to achieve their good dispersion. Subsequently, different weight percentages of the modified NPs (3, 6, and 9 wt%) were incorporated in poly(vinyl chloride) (PVC) as the matrix. Thermogravimetric analysis of the SiO₂-BSA NPs indicated that 12 wt% of the modifier was loaded on the surface of SiO₂ NPs. Encapsulation of the SiO₂-BSA resulted in a meaningful improvement in the optical, mechanical and thermal characteristics of the prepared PVC nanocomposites (NCs). X-ray diffraction (XRD) patterns for the PVC/SiO₂-BSA NCs showed a crystalline behavior for the NC with 6 wt% of the SiO₂-BSA originated from the phosphate buffer on the NPs. Water contact angle of the PVC/SiO₂-BSA NCs showed that the hydrophilicity enhanced with increasing of the NPs contents.