一个函数不等式的加强与延伸

从一个常见的不等式谈起,分析了多种证明方法,运用该不等式推导出了多个重要结论,对不等式进行了扩充和加强,解释了蕴含的意义,显示了该不等式的重要性和深刻性.     

基于粗糙集的患者满意度评价模型及其实证分析

在文献阅读及实地调研的基础上,本文提出了患者满意度的定义,建立了影响患者满意度的指标体系,介绍了粗糙集的相关概念及利用粗糙集进行评价的步骤,提出了新的约简方法,构建了基于粗糙集的患者满意度评价模型并进行了实证分析,得出了影响患者满意度的关键指标,并计算了关键指标权重,对江西省十个医院进行了综合评价值的计算.     

交通运输系统协调发展理论与模型研究

提出了交通运输系统协调度的评价分析模型.从系统论的观点出发,提出了交通运输系统协调理论的概念,探讨了交通运输系统随时间而不断演化变迁的规律,给出了交通运输系统协调发展基本步骤;并根据协调学原理,讨论了交通运输系统的协调性问题,提出了系统协调发展模型,对交通运输子系统内部及子系统之间及系统整体的协调发展问题进行了研究,探讨了交通运输可持续发展的系统协调管理过程,为进一步研究交通运输系统的可持续发展奠定了基础.     

关于举办2012年中学生数学奥林匹克夏令营活动的启事

从1996年至今,华中师范大学数学与统计学学院已成功举办多届全国中学生数学奥林匹克夏令营活动,培养了大批优秀的数学竞赛选手,他们经过权威名师的指点,既丰富了理论知识,更掌握了实践经验,为走上成功明确了航向,在国内、国际数学竞赛中取得了令人瞩目的成绩。我院已成为全国数学奥林匹克活动的重要培训基地,吸引了众多优秀中学生云集武汉参     

系统动力学在城市污水再生回用系统中的应用

用系统动力学方法研究了城市污水回用系统.首先分析了影响城市污水回用系统的诸多因素以及它们之间的相互关系,探讨了污水再生回用系统行为和结构的特点,确定了系统中因素之间的定量关系,建立了城市污水回用系统动力学(SD)模型,并介绍了模型的检验方法.同时给出了SD模型的具体应用实例,对西北地区的某一城市的污水回用进行了预测和分析,提出了符合该城市发展的污水回用方案.     

压板松动时大型发电机端部绕组的主共振与分岔

研究了大型汽轮发电机定子端部固定绕组的压板松动时,位于两侧压板间某段绕组的振动问题．首先,采用分离变量法,给出了发电机运行时定子端部绕组区域的磁感应强度表达式,并给出了绕组所受电磁力及与松动压板间摩擦力的计算式．其次,建立了研究绕组非线性振动问题的力学分析模型,采用多尺度法对主共振情形进行了解析求解,推得了稳态运动下的幅频响应方程,并对定常解的稳定性及分岔奇异性进行了研究,得到了稳定性的判定条件及分岔方程的转迁集．最后,针对工程实际问题进行了计算,给出了相应的幅频响应曲线图,并进行了分析讨论．     

求解资源受限项目调度问题的人工鱼群算法

提出了将人工鱼群算法应用于求解资源受限项目调度问题中的构想,建立了求解资源受限项目调度问题的人工鱼群算法模型,设计了一种标准随机键编码方式,构建了人工鱼的觅食行为、聚群行为、追尾行为和随机行为四种基本算子,采用了正向逆向局部改进技术和精英保留策略,并给出了算法流程。应用PSPLIB标准问题库对该算法进行了大量的测试,并与其他算法进行了比较,验证了该算法的有效性。     

红树林自然保护区湿地生态系统的数学模型及其应用

研究了红树林自然保护区自然环境和人类社会活动对于生态系统的影响,考虑了生物之间的相互关系,将生物量、生物生长的面积等作为主要指标,建立了常微分方程组模型,对生态系统的变化情况进行了描述,借助稳定性分析对方程进行了研究,并进行了数值模拟。根据理论分析和数值模拟的结果,对保护区的林木恢复工作提出了合理的建议。     

一个游戏难题的推广、建模及求解

推广了RPG游戏中的一个难题,建立了相应的数学模型,给出了完善的解决方案,深化了现行的相关结果.     

网络安全产品研究

本文在研究了网络安全的国内外有关情况后对网络安全技术进行了探讨 ,介绍了一种简单而实用的网络安全产品 ,添补了这方面的空白 ,而且本文介绍的产品已经应用到了许多部门 ,为网络安全做出了贡献     

两类带有确定潜伏期的SEIS传染病模型的分析

通过研究两类带有确定潜伏期的SEIS传染病模型,发现对种群的常数输入和指数输入会使疾病的传播过程产生本质的差异．对于带有常数输入的情形,找到了地方病平衡点存在及局部渐近稳定的阈值,证明了地方病平衡点存在时一定局部渐近稳定,并且疾病一致持续存在．对于带有指数输入的情形,发现地方病平衡点当潜伏期充分小时是局部渐近稳定的,当潜伏期充分大时是不稳定的．     

Chaotic synchronization with filter based on wavelet transformation

A kind of chaotic synchronization method is presented in the paper. In the transmitter, part signals are transformed by wavelet and the detail information is removed. In the receiver, the component with low frequency is reconstructed and discrete feedback is used, we show that synchronization of two identical structure chaotic systems is attained. The effect of feedback on chaotic synchronization is discussed. Using the synchronous method, the transmitting signal is transported in compressible way, system resource is saved, the component with high frequency is filtered and the effect of disturbance on synchronization is reduced. The synchronization method is illustrated by numerical simulation experiment.     

Logic optimality for multi-objective optimization

Pareto dominance is one of the most basic concepts in multi-objective optimization. However, it is inefficient when the number of objectives is large because in this case it leads to an unmanageable number of Pareto solutions. In order to solve this problem, a new concept of logic dominance is defined by considering the number of improved objectives and the quantity of improvement simultaneously, where probabilistic logic is applied to measure the quantity of improvement. Based on logic dominance, the corresponding logic nondominated solution is defined as a feasible solution which is not dominated by other ones based on this new relationship, and it is proved that each logic nondominated solution is also a Pareto solution. Essentially, logic dominance is an extension of Pareto dominance. Since there are already several extensions for Pareto dominance, some comparisons are given in terms of numerical examples, which indicates that logic dominance is more efficient. As an application of logic dominance, a house choice problem with five objectives is considered.     

油田注水系统拓扑布局优化的混合遗传算法

以投资最小为目标函数,建立了注水系统拓扑布局优化数学模型.根据模型特点,将优化问题分为两层,分别采用遗传算法和非线性优化方法进行求解.并对遗传算法的操作过程进行了改进,调整了适应函数,改进了交叉和变异操作,结合了模拟退火算法,在操作过程中使约束条件得到满足,减少了不可行解的产生,使遗传算法的优化性能得到了提高.优化算例说明了该方法的有效性.     

Borel measures in consonant spaces

A topology on a set X is called consonant if the Scott topology of the lattice is compactly generated; equivalently, if the upper Kuratowski topology and the co-compact topology on closed sets of X coincide. It is proved that every completely regular consonant space is a Prohorov space, and that every first countable regular consonant space is hereditarily Baire. If X is metrizable separable and co-analytic, then X is consonant if and only if X is Polish. Finally, we prove that every pseudocompact topological group which is consonant is compact. Several problems of Dolecki, Greco and Lechicki, of Nogura and Shakmatov, are solved.     

An analysis of a ‘Sunday Supplement’ problem

A problem posed in an influential textbook is analysed in more detail than is given there. The textbook answer to the problem has been represented as counterintuitive, as is probably the case; however, it is here shown that it depends critically on an assumption. If this is relaxed, then a wide variety of possible answers is available. All the same, if the special assumption made is replaced by one of a number of more realistic ones, then the order of magnitude of the approximation given by the author of the textbook is preserved.     

不确定条件下双目标组批生产的交货期设置研究

交货期是调度方法的函数,因而具有不确定性.研究变批量、变批次、变生产能力下,单阶段、双目标有条件相容组批的交货期设置问题,将它转化为订单投放策略和调度模式研究.建立了一个基于目标的双目标订单投放策略数学模型.采用目标序列优先方法进行双目标求解,用两种调度模式求出区间值,进行最优交货期逼近.模式1:松弛掉产品加工约束条件,基于负荷考虑、给出离散生产模式下订单完工率最大的订单排序算法,算法综合考虑了任务紧急程度、可调度性、重要度和流程时间最短四个方面,得到区间的一个端点.模式2是有条件相容的启发式组批调度算法,即通过聚类计算将订单安排问题转化为多队列调度问题,将新来订单的投放转化为某个队列的插单和批量分割问题,不同队列中批的投产顺序由批中优先级最高的订单决定,并在能力约束下进行批量分割计算,得到区间的另一个端点,结合流程可靠性求出区间.实例证明,模式2的交货期设置小,订单完工率和生产率高.     

弱空间式Locale

空间式locale范畴SLoc是locale范畴Loc的余反射满子范畴,但对locale乘积不封闭．本文引入弱空间式locale,证明弱空间式locale范畴WSloc为范畴Loc的余反射满子范畴,且对locale秉积封闭．还证明了一个locale A是空间式的当且仅当它的枝映射localeN(A)是弱空间式的;一个空问式locale的每一个子locale都是空间式的当且仅当它的每一个子locale是弱空间式的．最后,证明了弱空间式性在定向函子下保持不变．     

Banach空间有界线性算子强连续双半群

本文在Ｂａｎａｃｈ空间上研究单参数有界线性算子族－强连续双半群。     

Optimal damping ratio for linear second-order systems

In this paper, it is shown that the optimal damping ratio for linear second-order systems that results in minimum-time no-overshoot response to step inputs is of bang-bang type. The optimal damping ratio is zero at the outset and is switched to some maximum value at an appropriate instant of time. The switching time is shown to be a function of the maximum damping ratio and the system natural frequency. Furthermore, it is shown that the larger the maximum damping ratio is, the shorter it takes for the system to reach the desired set point. Finally, it is shown that, if the optimal damping ratio is switched as a function of the system state, then the minimum-time no-overshoot criterion is satisfied, irrespective of the magnitude of the uncertainty in the value of the system natural frequency.