Physicochemical properties of (CH<Subscript>3</Subscript>)<Subscript>2</Subscript>NH<Subscript>2</Subscript>Cl–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites

Composite solid electrolytes were synthesized from the organic salt dimethylammonium chloride (1–x)C₂H₈NCl–xAl₂O₃. Their physicochemical properties were studied. In the starting C₂H₈NCl salt, there is a phase transition at 39°C accompanied by an increase in conductivity by two orders of magnitude. The conductivity of the high-temperature phase is 9.3 × 10^–6 S/cm at 160°C. A differential scanning calorimetry study showed that the salt in the composites spreads over the oxide surface and at x > 0.6 the salt melting enthalpy decreases to zero. The conductivity of the resulting composites was studied by impedance spectroscopy. It was shown that heterogeneous doping leads to a sharp increase in ion conductivity to 7.0 × 10^–3 S/cm at 160°C and a decrease in the activation energy to 0.55 eV.     

Crystal structure of [Pb<Subscript>3</Subscript>(OH)<Subscript>4</Subscript>Co(NO<Subscript>2</Subscript>)<Subscript>3</Subscript>](NO<Subscript>3</Subscript>)(NO<Subscript>2</Subscript>)·2H<Subscript>2</Subscript>O

The structure of [Pb₃(OH)₄Co(NO₂)₃](NO₃)(NO₂)·2H₂O is determined by single crystal X-ray diffraction. The crystallographic characteristics are as follows: a = 8.9414(4) Å, b = 14.5330(5) Å, c = 24.9383(9) Å, V = 3240.6(2) ų, space group Pbca, Z = 8. The Co(III) atoms have a slightly distorted octahedral coordination formed by three nitrogen atoms belonging to nitro groups (Co–N_av is 1.91 Å) and three oxygen atoms belonging to hydroxyl groups (Co–O_av is 1.93 Å). The hydroxyl groups act as μ₃-bridges between the metal atoms. The geometric characteristics are analyzed and the packing motif is determined.     

Crystal structure of Na<Subscript>3</Subscript>(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>[Ir(SO<Subscript>3</Subscript>)<Subscript>2</Subscript>Cl<Subscript>4</Subscript>]·4H<Subscript>2</Subscript>O

The complex Na₃(NH₄)₂[Ir(SO₃)₂Cl₄]·4H₂O was examined with single crystal X-ray diffraction and IR spectroscopy. Crystal data: a = 7.3144(4) Å, b = 10.0698(5) Å, c = 12.3748(6) Å, β = 106.203(1)°, V = 875.26(8) ų, space group P2₁/c, Z = 2, d _calc = 2.547 g/cm³. In the complex anion two trans SO ₃ ^2? groups are coordinated to iridium through the S atom. The splitting of O-H bending vibrations of crystallization water molecules and N-H ones of the ammonium cation is considered in the context of different types of interactions with the closest neighbors in the structure.     

Synthesis and structure of the complex [Mo<Subscript>3</Subscript>(μ<Subscript>3</Subscript>-S)(μ<Subscript>2</Subscript>-S<Subscript>2</Subscript>)<Subscript>3</Subscript>(Et<Subscript>2</Subscript>NCS<Subscript>2</Subscript>)<Subscript>3</Subscript>]I

The structure of tri-μ₂-disulfido-μ₃-thiotris(diethyldithiocarbamato)-S,S′-triangle-trimolybdenum iodide [Mo₃(μ₃-S)(μ₂-S₂)₃(Et₂NCS₂)₃]I was determined. The compound was characterized by differential thermal analysis and IR, Raman, and X-ray electronic spectroscopy.     

Crystal structure and thermal properties of [Au(en)<Subscript>2</Subscript>]<Subscript>2</Subscript>[Cu(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>]<Subscript>3</Subscript>·8H<Subscript>2</Subscript>O

The crystal structure of a double complex salt of the composition [Au(en)₂]₂[Cu(C₂O₄)₂]₃·8H₂O (en = ethylenediamine) at 150 K is determined by single crystal X-ray diffraction. The crystal data for C₂₀H₄₈Au₂Cu₃N₈O₃₂ are: a = 9.1761(3) Å, b = 16.9749(6) Å, c = 13.4475(5) Å, β = 104.333(1)°, V = 2029.43(12) ų, P2₁/c space group, Z = 2, d _x = 2.450 g/cm³. It is demonstrated that the thermal decomposition of the double complex salt in a helium or hydrogen atmosphere affords the solid solution Au_0.4Cu_0.6.     

A Raman Spectroscopic Study of Aqueous La(CH<Subscript>3</Subscript>CO<Subscript>2</Subscript>)<Subscript>3</Subscript> Solutions and La(CH<Subscript>3</Subscript>CO<Subscript>2</Subscript>)<Subscript>3</Subscript>·1.5 H<Subscript>2</Subscript>O(cr)

Aqueous solutions of La(CH₃CO₂)₃, NaCH₃CO₂ and La(ClO₄)₃ were studied using Raman spectroscopy. In dilute NaCH₃CO₂ solution, acetate is fully hydrated and forms only minor amounts of ion pairs. The characteristic Raman bands are discussed and assigned. In fairly dilute La(ClO₄)₃ solutions, the La³⁺(aq) ion occurs as the nonahydrate. The separation of the carboxylate bands, ν_as – ν_s (Δ-value), in NaCH₃CO₂(cr) compared to La(CH₃CO₂)₃·1.5H₂O(cr) correlates with the bonding type of acetate which is “ionic” in the former but bidentate chelating/tridentate chelating in the latter. Other acetate bands such as the deformation mode of the CO₂ moiety, δ CO₂, and the two rocking vibrations (ρ), as well as the C–C stretch show marked differences in their band positions in NaCH₃CO₂(cr) compared to the ones in La(CH₃CO₂)₃·1.5H₂O(aq). In a ternary solution of La(CH₃CO₂)₃/LaCl₃ with a molar ratio La³⁺(aq): \( {\text{CH}}_{3} {\text{CO}}_{2}^{ - } \)(aq) = 3.87: 1.00), the bands of the bound acetate on La³⁺ were characterized and compared to those of fully hydrated acetate, \( {\text{CH}}_{3} {\text{CO}}_{2}^{ - } \left( {\text{aq}} \right) \). In this solution, almost all acetate is ligated to La³⁺ in a bidentate fashion and two complex species could be identified (molar ratios La³⁺: \( {\text{CH}}_{3} {\text{CO}}_{2}^{ - } \)  = 1:1 and 1:2, respectively). In La(CH₃CO₂)₃ solutions in H₂O and D₂O strong acetato complexes are formed and the bands of the bound acetate were characterized and compared with the ones of the fully hydrated acetate modes. A dilution series down to 0.0037 mol·L^?1 in La(CH₃CO₂)₃(aq) and to 0.0150 mol·L^?1 in La(CH₃CO₂)₃(D₂O) showed that two acetate complexes are formed in these solutions. Again, it was shown that in these solutions the bound acetates on La³⁺ exist as bidentate ligands. DFT frequencies of the acetate on clusters {La(OH₂)₇O₂CCH₃)}²⁺ and {La(OH₂)₅(O₂CCH₃)₂}⁺ compared well with the measured values. By determining the ligation number, \( \bar{n} \), it can be established that in dilute solutions, below 0.04 mol·L^?1, a complex with a 1:1 stoichiometry (La³⁺: \( {\text{CH}}_{3} {\text{CO}}_{2}^{ - } \)) exists in equilibrium with “free” acetate while in more concentrated solutions a 1:2 complex also forms. La³⁺(aq) hydrolysis is slight and very small equilibrium concentrations of CH₃COOH were detected (C–C stretch at 893 cm^?1). From quantitative Raman measurements, K ₁ was determined to be 160 ± 10 at 22 °C.     

Oxidation of Adamantane with H<Subscript>2</Subscript>O<Subscript>2</Subscript>–CF<Subscript>3</Subscript>COCF<Subscript>3</Subscript> · 1.5 H<Subscript>2</Subscript>O in the Presence of VO(acac)<Subscript>2</Subscript>

The system hydrogen peroxide–hexafluoroacetone sesquihydrate effectively oxidizes adamantane in the presence of VO(acac)₂ to afford 64% of adamantan-1-ol in tert-butyl alcohol or 76% of adamantan-2-one in a mixture of acetic acid with pyridine.     

Reciprocal system 3Tl<Subscript>2</Subscript>S + Sb<Subscript>2</Subscript>Se<Subscript>3</Subscript> ⇆ 3Tl<Subscript>2</Subscript>Se + Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>

Phase equilibria in the reciprocal system 3Tl₂S + Sb₂Se₃ ? 3Tl₂Se + Sb₂S₃ are investigated by DTA, X-ray powder diffraction, and emf measurements. Some polythermal sections, the isothermal section of the phase diagram at 400K, and the liquidus-surface projection for this system are constructed. The types and coordinates of invariant and univariant equilibria are determined. It is shown that the system is non-diagonal. Broad regions of solid solutions are found on the basis of the binary compounds Tl₂S and Tl₂Se and along the boundary system Sb₂S₃-Sb₂Se₃ and the sections Tl₃SbS₃-Tl₃SbSe₃, TlSbS₂-TlSbSe₂, and TlSb₃S₅-TlSb₃Se₅ of the phase diagram.     

Crystal structure of Ba<Subscript>3</Subscript>[UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>(NCS)]<Subscript>2</Subscript> · 9H<Subscript>2</Subscript>O

Single crystals of Ba₃[UO₂(C₂O₄)₂(NCS)]₂ · 9H₂O are synthesized and studied by X-ray diffraction. The crystals are orthorhombic, space group Fddd, Z = 16, and the unit cell parameters are a = 16.253(3) Å, b = 22.245(3) Å, c = 39.031(6) Å. The main crystal structural units are mononuclear complex groups [UO₂(C₂O₄)₂NCS]^3? of the crystal-chemical family (AB ₂ ⁰¹ M¹ (A = UO ₂ ²⁺ , B⁰¹ = C₂O ₄ ^2? , M¹ = NCS^?) of the uranyl complexes linked into a three-dimensional framework by electrostatic interactions and hydrogen bonds involving oxalate ions and water molecules.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

Effect of ZrO<Subscript>2</Subscript> on Catalyst Structure and Catalytic Sulfur-Resistant Methanation Performance of MoO<Subscript>3</Subscript>/ZrO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

A series of MoO₃/ZrO₂–Al₂O₃ catalysts was prepared and investigated in the sulfur-resistant methanation aimed at production of synthetic natural gas. Different methods including impregnation, deposition precipitation, and co-precipitation were used for preparing ZrO₂–Al₂O₃ composite supports. These composite supports and their corresponding Mo-based catalysts were investigated in the sulfur-resistant methanation, and characterized by N₂ adsorption–desorption, XRD and H₂-TPR. The results indicated that adding ZrO₂ promoted MoO3dispersion and decreased the interaction between Mo species and support in the MoO₃/ZrO₂–Al₂O₃ catalysts. The co-precipitation method was favorable for obtaining smaller ZrO₂ particle size and improving textural properties of support, such as better MoO₃ dispersion and increased concentration of Mo⁶⁺ species in octahedral coordination to oxygen. It was found that the MoO₃/ZrO₂–Al₂O₃ catalyst with ZrO₂Al₂O₃ composite support prepared by co-precipitation method exhibited the best catalytic activity. The ZrO₂ content in the ZrO₂Al₂O₃ composite support was further optimized. The MoO₃/ZrO₂–Al₂O₃ with 15 wt % ZrO₂ loading exhibited the highest sulfur-resistant CO methanation activity, and excess ZrO₂ reduced the specific surface area and enhanced the interaction between Mo species and support. The N₂ adsorption-desorption results indicated that the presence of ZrO₂ in excessive amounts decreased the specific surface area since some amounts of ZrO₂ form aggregates on the surface of the support. The XRD and H₂-TPR results showed that with the increasing ZrO₂ content, ZrO₂ particle size increased. These led to the formation of coordinated tetrahedrally Mo⁶⁺(T) species and crystalline MoO₃, and this development was unfavorable for improving the sulfur-resistant methanation performance of MoO₃/ZrO₂–Al₂O₃ catalyst.     

Reduction of Oxide Mixtures of (Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> + CuO) and (Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> + Co<Subscript>3</Subscript>O<Subscript>4</Subscript>) by Low-Temperature Hydrogen Plasma

The paper presents experimental results pertaining to the reduction of oxide mixtures namely (Fe₂O₃ + CuO) and (Fe₂O₃ + Co₃O₄), by low-temperature hydrogen plasma in a microwave hydrogen plasma set-up, at microwave power 750 W and hydrogen flow rate 2.5 × 10^?6 m³ s^?1. The objective was to examine the effect of addition of CuO or Co₃O₄, on the reduction of Fe₂O₃. In the case of the Fe₂O₃ and CuO mixture, oxides were reduced to form Fe and Cu metals. Enhancement of reduction of iron oxide was marginal. However, in the case of the Fe₂O₃ and Co₃O₄ mixture, FeCo alloy was formed within compositions of Fe₇₀Co₃₀, to Fe₃₀Co₇₀. Since the temperature was below 841 K, no FeO formed during reduction and the sequence of Fe₂O₃ reduction was found to be Fe₂O₃ → Fe₃O₄ → Fe. Reduction of Co₃O₄ preceded that of Fe₂O₃. In the beginning, the reduction of oxides led to the formation of Fe–Co alloy that was rich in Co. Later Fe continued to enter into the alloy phase through diffusion and homogenization. The lattice strain of the alloy as a function of its composition was measured. In the oxide mixture in which excessive amount of Co₃O₄ was present, all the Co formed after reduction could not form the alloy and part of it appeared as FCC Co metal. The crystallite size of the alloy was in the range of 22–30 nm. The crystal size of the Fe–Co alloy reduced with an increase in Co concentration.     

Synthesis and study of uranyl arsenate (UO<Subscript>2</Subscript>)<Subscript>3</Subscript>(AsO<Subscript>4</Subscript>)<Subscript>2</Subscript> · 12H<Subscript>2</Subscript>O

A method for producing synthetic troegerite of composition(UO₂)₃(AsO₄)₂ · 12H₂. Owas developed. X-ray diffraction, IR spectrometry, X-ray fluorescence analysis, and scanning calorimetry were used to study its dehydration and thermal decomposition, to solve the structgure, and to determine X-ray diffraction and IR spectroscopic characteristics.     

Porous xerogels with a bifunctional surface layer of the composition ≡Si(CH<Subscript>2</Subscript>)<Subscript>3</Subscript>SH/≡Si(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>H<Subscript>3</Subscript>

The sol-gel method with ethanol as a solvent and fluoride ion as a catalyst was used to prepare polysiloxane xerogels containing both 3-mercaptopropyl and n-propyl groups in the surface layer. An increase in the relative amount of n-propyltriethoxysilane in the initial reaction solution was found to result in the formation of xerogels with developed porous structures, which was accompanied by an increase in the specific surface area from 370 to 550 m²/g; simultaneously, other porous structure parameters such as sorption volume and pore size exhibited a tendency to increase. Atomic-force microscopy was used to show that the xerogels synthesized comprised aggregates of mean size 30 nm. An analysis of the IR and ¹³C cross-polarization magic angle spinning NMR data led us to conclude that the surface layer of bifunctional xerogels contained not only 3-mercaptopropyl and n-propyl groups but also silanol groups, part of nonhydrolyzed alkoxy groups, and H-bonded water molecules. The ²⁹Si cross-polarization magic angle spinning NMR spectra revealed the presence of structural units of the compositions T¹ [(≡SiO)Si(OR’)₂(CH₂CH₂CH₃) and/or (≡SiO)Si(OR’)₂(CH₂)₃SH, R’ = H, OCH₃, or OC₂H₅], T² [(≡SiO)₂Si(OR’)(CH₂CH₂CH₃) and (≡SiO)₂Si(OR’)(CH₂)₃SH], and T³ [(≡SiO)₃SiCH₂CH₂CH₃ and (≡SiO)₃Si(CH₂)₃SH] in the xerogels synthesized.     

Crystal structure of glycine phosphite C<Subscript>2</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>·H<Subscript>3</Subscript>PO<Subscript>3</Subscript>

Single crystal X-ray diffraction study of glycine phosphite C₂H₅NO₂·H₃PO₃ was performed (monoclinic, space group P2₁/c, a = 7.401(3) Å, b = 8.465(3) Å, c = 9.737(3) Å; β = 100.73(5)°, Z = 4). It has been found that one of hydrogen atoms is located at the centre of symmetry forming two strong hydrogen bonds to yield H₄P₂O ₆ ^?2 dimers, while another hydrogen atom is statistically disordered over two positions and organizes the dimers into an infinite corrugated chain. The ordering of this hydrogen atom position and/or displacement of the other one from the centre of symmetry will lead to the loss of symmetry centre and lowering of the point group symmetry from C_2h to piezo-active group C₂ or C _s .     

Thermal analysis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1−x</Subscript>(Y<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new ecological inorganic pigments. Chemical compounds of the (Bi₂O₃)_1−x(Y₂O₃)_x type were synthesized. The host lattice of these pigments is Bi₂O₃ that is doped by Y³⁺ ions. The incorporation of doped ions provides the interesting colours and contributes to a growth of the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. This paper also contains the results of the pigment characterization by X-ray powder diffraction and their colour properties.     

Crystal Structure of Neptunium(V) Acetate [(NpO<Subscript>2</Subscript>)<Subscript>2</Subscript>(OOCCH<Subscript>3</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)] ⋅ 2H<Subscript>2</Subscript>O

A new neptunium(V) complex [(NpO₂)₂(CH₃COO)₂(H₂O)] ? 2H₂O was synthesized and its crystal structure was determined. The unit cell parameters are: a = 24.007(10) Å, b = 6.779(3) Å, c = 8.076(3) Å, space group Pnma, Z = 4, V = 1314.2(9) ų, R = 0.049, wR(F²) = 0.105. The crystal structure of the compound is composed of neutral [(NpO₂)₂(CH₃COO)₂(H₂O)] layers and molecules of the water of crystallization. Each of the crystallographically independent neptunoyl ions performs a bidentate function thus forming a composite system of cation-cation bonds.     

Effect of Fe-zeolite on formation of N<Subscript>2</Subscript>O in selective reduction of NO by NH<Subscript>3</Subscript> over V<Subscript>2</Subscript>O<Subscript>5</Subscript>–WO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> catalyst

An approach for significantly suppressing N₂O formation in reduction of NO by NH₃ over V₂O₅–WO₃/TiO₂ (VWT) catalyst has been studied by coating different amounts of a Fe-exchanged zeolite (FeZ) onto the catalyst. FeZ-promoted VWT samples were characterized using N₂ sorption, X-ray diffraction (XRD) analysis, and NH₃ adsorption/desorption techniques to understand the primary role of FeZ in lowering N₂O production levels. At high temperatures (≥450 °C), VWT gave N₂O production with high concentrations, while N₂O formation was noticeably reduced when using FeZ-promoted catalysts, which also showed somewhat lower NO removal activities (<5 %) at all temperatures. N₂ sorption and XRD measurements revealed no perceptible physical or chemical alterations of each constituent, even in VWT catalysts after FeZ coating following high-temperature calcination. Adsorption of NH₃ on unpromoted and FeZ-promoted catalysts and subsequent desorption yielded very complicated spectra for N₂O that might primarily come from NH₃ oxidation, and the interaction between V–NO species at temperatures >580 °C. NO on neighboring sites seems to be produced via decomposition of N₂O generated at lower temperatures. The FeZ in the promoted VWT catalysts could be responsible for N₂O decomposition and N₂O reduction with unreacted NH₃ at temperatures >400 °C, thereby significantly lowering N₂O emission levels. This promotional effect bodes well for use in many industrial deNO _x applications.     

Thermal stability of crandallite CaAl<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>5</Subscript>·(H<Subscript>2</Subscript>O)

Thermogravimetry combined with evolved gas mass spectrometry has been used to characterise the mineral crandallite CaAl₃(PO₄)₂(OH)₅·(H₂O) and to ascertain the thermal stability of this ‘cave’ mineral. X-ray diffraction proves the presence of the mineral and identifies the products of the thermal decomposition. The mineral crandallite is formed through the reaction of calcite with bat guano. Thermal analysis shows that the mineral starts to decompose through dehydration at low temperatures at around 139 °C and the dehydroxylation occurs over the temperature range 200–700 °C with loss of the OH units. The critical temperature for OH loss is around 416 °C and above this temperature the mineral structure is altered. Some minor loss of carbonate impurity occurs at 788 °C. This study shows the mineral is unstable above 139 °C. This temperature is well above the temperature in the caves of 15 °C maximum. A chemical reaction for the synthesis of crandallite is offered and the mechanism for the thermal decomposition is given.