Sample container temperature gradient influence on the BET specific surface area

Differences between BET specific surface area (BET SSA) values exist due to data collected in stainless steel and less thermally conductive sample holders. Not accounting for the temperature gradient along stainless steel sample holders during manometric gas adsorption measurements at cryogenic temperatures leads to errors of up to 3.2% in the BET SSA values with a relative combined standard uncertainty (RCSU) of 0.63%. A unidimensional heat flow model accurately accounts for the temperature gradient, leading to an agreement of 0.16% between the BET SSA values for both sample holder units.     

Molecular hydrogen adsorption at surface adatoms

Using electron-energy-loss spectroscopy, we have measured preferential adsorption of molecular hydrogen at Cu and Au adatoms deposited on a cold Cu(100) surface. We show, with particular attention to the D(2)-Au system, that the molecules adsorb at the adatoms, with an enhanced binding energy. The adsorption state is not of chemisorption character, the D(2) rotational and internal vibrational transition energies are close to the corresponding gas phase values, a characteristic property of a physisorbed state. A revealing signature of the D(2)-Au interaction is an induced dipole activity of the rotational transition, which discriminates molecules adsorbed at the adatoms from those adsorbed on the bare substrate surface. The average number of molecules per Au atom depends on the Au coverage and increases at lower coverages, for example, at 4% of an adatom monolayer, there are approximately six D(2) molecules per Au adatom. In this limit, Au monomers prevail, and a cluster of six D(2) around a single Au adatom appears to be an optimal dense two-dimensional configuration.     

比表面积和孔径分布测定与计算方法的改进

本文比较了BET多层吸附模型, Pickett有限层吸附模型以及Dubinin微孔填充模型, 并在此基础上, 假定多层吸附和微孔填充两种过程同时发生, 导出一个修正的吸附方程式, 并说明修正后的方程具有较大的适用性和准确性, 在孔径分布的测定中, 用H2替代He作为载气, 大大降低测定成本, 应用微机实现数据运算过程微机化和结果的图谱化, 大大缩短处理时间。     

Ammonium hydrogen tartronate at 240 and 20 K

The low-temperature structure determination of the title compound, alternatively called ammonium hydrogen hydroxy­propane­dioate, NH₄⁺·C₃H₃O₅⁻, has revealed that the H atom involved in a very short asymmetric O—H⋯O hydrogen bond [O⋯O = 2.448 (2) Å at 240 K and 2.4393 (10) Å at 20 K] is disordered.     

焦化过程半焦孔隙结构时空变化规律的实验研究——孔隙率、比表面积、孔径分布的变化

以井式加热炉(φ150mm×300mm) 为主体模拟工业炼焦过程，借助压汞法考察了焦化过程中不同焦化温度、炉内径向不同位置半焦的孔隙结构参数的变化。结果表明，半焦中存在丰富的大孔和中孔，孔隙率和比表面积随焦化温度、径向位置呈规律性变化；相同焦化温度下，由边缘沿中心方向先减少后增加；相同位置下，孔隙率随着温度的升高逐渐变小，至900℃后孔隙率略有增大，比表面积在900℃左右达到最小值后随温度升高又迅速增加；此外，半焦孔隙以孔径大于5.0μm的孔为主，孔径小于0.4μm、介于0.4μm～5.0μm和大于5.0μm的孔累积孔隙分率分别约占总孔体积分数的10％、20％和70％，孔径分布的高峰处于60 μm～150μm。SEM分析显示，焦柱中存在丰富的大孔，且边缘和中心处孔径较大。     

The specific surface area and porous structure of graphite materials

Transformations of the specific surface area and porous structure of carbon materials based on graphite were studied by low-temperature adsorption of nitrogen. Exfoliated graphite and graphite foil were found to have a developed (compared with the initial graphite) surface (up to 90 m²/g) and a porous structure formed by slit-like mesopores with a characteristic radius of ∼20 ?. The determining influence of the method of synthesis on the adsorption properties of materials was demonstrated for the first time. Original Russian Text ? O.N. Shornikova, E.V. Kogan, N.E. Sorokina, V.V. Avdeev, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 6, pp. 1161–1164.     

Determination of the specific surface area of FORUM fluoroplastic powder by the dye adsorption from solutions

The specific surface area of FORUM fluoroplastic powder, synthesized by the partial thermal degradation of polytetrafluoroethylene followed by the separation of spherical particles from a gas condensate is estimated from the adsorption of two dyes, methylene blue and rhodamine 6G, from aqueous solutions.     

A triptycene-based polymer of intrinsic microposity that displays enhanced surface area and hydrogen adsorption

A novel triptycene-based polymer of intrinsic microporosity (Trip-PIM) displays enhanced surface area (1065 m2 g(-1)) and reversibly adsorbs 1.65% hydrogen by mass at 1 bar/77 K and 2.71% at 10 bar/77 K.     

Influence of surface treatments on micropore structure and hydrogen adsorption behavior of nanoporous carbons

The scope of this work was to control the pore sizes of porous carbons by various surface treatments and to investigate the relation between pore structures and hydrogen adsorption capacity. The effects of various surface treatments (i.e., gas-phase ozone, anodic oxidation, fluorination, and oxygen plasma) on the micropore structures of porous carbons were investigated by N(2)/77 K isothermal adsorption. The hydrogen adsorption capacity was measured by H(2) isothermal adsorption at 77 K. In the result, the specific surface area and micropore volume of all of the treated samples were slightly decreased due to the micropore filling or pore collapsing behaviors. It was also found that in F(2)-treated carbons the center of the pore size distribution was shifted to left side, meaning that the average size of the micropores decreased. The F(2)- and plasma-treated samples showed higher hydrogen storage capacities than did the other samples, the F(2)-treated one being the best, indicating that the micropore size of the porous carbons played a key role in the hydrogen adsorption at 77 K.     

Preparation of pitch-based activated carbon fibers with high specific surface area and excellent adsorption properties

Research on Chemical Intermediates - Activated carbon fibers (ACFs), as the third generation of activated carbon materials, are promising adsorbents due to their rich surface functional groups,...     

Heat of adsorption of cysteine enzymes on mesoporous silica with high specific surface area

The adsorption of a cysteine enzyme, on mesoporous silica with high specific surface area synthesized by the sol-gel method, was studied in a heat flow calorimeter, to determine the energy involved in the adsorption process of the protein. The adsorption was carried out at a constant temperature of 30°C to avoid the denaturation of the enzyme. The observed results indicate that the obtained biomaterials (silica-enzyme) have possibilities for their application in several biotechnology processes. The heat of papain adsorption and the solid-enzyme (SiO₂-Papain) interactions at different pH are presented.     

Surface structure and energetics of hydrogen adsorption on the Fe(111) surface

Spin-polarized density functional theory calculations have been performed to characterize the hydrogen adsorption and diffusion on the Fe(111) surface at 2/3-, 1-, and 2-monolayer (ML) coverages. It is found that the most favored adsorption site for atomic hydrogen (H) is the top-shallow bridge site (tsb), followed by the quasi 4-fold site (qff) with the energy difference of about 0.1 eV, while the top site (t) is not competitive. Furthermore, the adsorbed atomic hydrogen (H) has a high mobility, as indicated by the small diffusion barriers. The local density of state (LDOS) analysis reveals that the Fe-H (tsb or qff) bond involves mainly the Fe 4s and 4p and H 1s orbitals with less contribution of the Fe 3d orbital, while the Fe 4s, 4p, and 3d orbitals all participate in the Fe-H (top) bond. In addition, the coverage effects on the adsorption configurations and adsorption energies are addressed.     

Effects of pore structure and surface chemical characteristics on the adsorption of organic vapors on titanate nanotubes

Effects of pore structure and surface chemical characteristics of titanate nanotubes (TNTs) on their adsorptive removal of organic vapors were investigated. TNTs were prepared via a hydrothermal treatment of TiO₂ powders in a 10 M NaOH solution at 150?°C for 24?h, and subsequently washed with HCl aqueous solution of different concentrations. Effects of acid washing process (or the sodium content) on the microstructures and surface chemical characteristics of TNTs were characterized with nitrogen adsorption-desorption isotherms, FTIR, and water vapor adsorption isotherms. For the adsorption experiments, gravimetric techniques were employed to determine the adsorption capacities of TNTs for four organic vapors with similar heats of vaporization (i.e., comparable heats of adsorption) but varying dipole moments and structures, including n-hexane, cyclohexane, toluene, and methyl ethyl ketone (MEK), at isothermal conditions of 20 and 25?°C. The experimental data were correlated by well-known vapor phase models including BET and GAB models. Isosteric heats of adsorption were calculated and heat curves were established. Equilibrium isotherms of organic vapors on TNTs were type II, characterizing vapor condensation to form multilayers. The specific surface area (and pore volume) and hydrophilicity of TNTs were the dominating factors for the determination of their organic vapors adsorption capacity. The GAB isotherm equation fitted the experimental data more closely than the BET equation. The heats of adsorption showed that the adsorption of organic vapors on TNTs was primarily due to physical forces and adsorbates with larger polarity might induce a stronger interaction with TNTs.     

Grand canonical Monte Carlo simulation of argon adsorption at the surface of silica nanopores: effect of pore size, pore morphology, and surface roughness

Argon adsorption (77 K) in atomistic silica nanopores of various sizes and shapes has been studied by means of grand canonical Monte Carlo simulations (GCMC). We discuss the effects of confinement (pore size), pore morphology (ellipsoidal, hexagonal, constricted pore), and surface texture (rough/smooth) on the thickness variation of the adsorbed film with pressure onto the disordered inner surface of porous materials (usually called t-plot or t-curve). We show that no confinement effect occurs when the diameter of the regular cylindrical pore is larger than 10 nm. For pores smaller than 6 nm, we find that the film thickness increases as the pore size decreases. We show that the adsorption isotherm in the rough pore can be described as the sum of an adsorbed amount similar to that found for a smooth pore (of the same radius) and a constant contribution due to atoms "trapped" in the infractuosities of the rough surface which act as a microporous texture. Simulation snapshots for Ar adsorption in hexagonal and ellipsoidal smooth pores indicate that at low pressures the gas/adsorbate interface retains memory of the pore shape and becomes cylindrical prior to the capillary condensation of the fluid in the pore. The film thickness in the hexagonal pore is close to that obtained for a cylindrical pore having a similar dimension. By contrast, we find that the film thickness for an ellipsoidal pore is always larger than that for an equivalent cylindrical pore (having the same length and volume but a circular section). We show that this effect strengthens as the pore size decreases and/or the pore asymmetry increases. Ar adsorption in a cylindrical constricted pore shows that the presence of the narrower part considerably modifies the adsorption mechanism. Finally, we report GCMC simulations of Ar adsorption (77 K) on a plane silica reference substrate for different intermolecular potentials. We discuss the effect of the interaction on the shape of the adsorption isotherm and compare our results with experiments.     

Comments on surface structure analysis by water and nitrogen adsorption

Specific surface area and pore size distribution are determined usually from adsorption isotherms at low temperatures using nitrogen or noble gases. These are not absolute parameters and the measuring methods are fraught with serious difficulties. General problems of sorption measurements and recent developments are discussed. To obtain information for practical purposes these measurements need to be supplemented by investigations of the sorbate/sorbent system used in practice. Results of the measurement of nitrogen and water vapour adsorption on different materials are compared. This revised version was published online in July 2006 with corrections to the Cover Date.     

Temperature, composition, and hydrogen isotope effect in the hydrogenation of CO on amorphous ice surface at 10-20 K

An experiment on the addition reaction of a D atom (deuteration) to CO on a cold ice surface is performed by deuterium atom exposure of three types of samples (pure solid CO, CO-capped H2O ice, and CO-H2O mixed ice) at 10-20 K. The variation of IR absorption spectra for the samples was measured by a Fourier transform infrared spectrometer during exposure to deuterium atoms. Reactions on pure solid CO were observed only at 10 K, while reactions on CO-capped H2O ice and CO-H2O mixed ice were observed to proceed even at 20 K. This indicates that the coexistence of H2O at the surface raises the reactive temperature. In addition, the experiment on H atom exposure was also carried out at 15 K to compare the reaction rate constant between the H and D atoms. The ratio of reaction rate constant kD/kH obtained is about 0.08 at 15 K. The authors provide information on the potential energy for the H+CO reaction at the surface by using the ratio kD/kH and by a model calculation of the potential tunneling with the asymmetric Eckart potential.     

Investigation of the pore structure of synthetic polymeric adsorbents by small-angle x-ray scattering and adsorption

It was shown that specimens of Polysorb-1 have a wide pore-size distribution, which includes micro-, supermicro-, and mesopores. Approximately 80% of the total pore surface participates in the adsorption of tributyl phosphate on Polysorb-1; adsorption occurs mainly in mesopores.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1735–1740, August, 1989.The authors thank A. M. Voloshchuk and T. A. Moskovskaya for providing data on low-temperature nitrogen sorption and for participating in a discussion of the results.     

Low-temperature adsorption of hydrogen on nanoporous aluminophosphates: effect of pore size

Several nanoporous aluminophosphates (AlPOs) have been used to analyze the effect of pore diameter on the hydrogen adsorption characteristics. The heat of adsorption and adsorption capacity per unit micropore volume increase with decreasing pore size. AlPOs with smaller micropores favorably adsorb hydrogen at relatively low pressures. This work demonstrates that small pore size and large micropore volume are beneficial for high hydrogen uptake.