Doubly pH-responsive pickering emulsion

A pH-responsive Pickering emulsion has been designed on the basis of commercially available alumina-coated silica nanoparticles (Ludox CL silica particles) and potassium hydrogen phthalate (KHP). KHP was found to bind to cationic particle surfaces at pH values between 3.5 and 5.5, enabling the resulting surface-active particles to stabilize emulsions of xylenes in water. Above and below this pH range, the system demulsifies, resulting in a reversible Pickering emulsifier having two pH-controlled, reversible transitions.     

颗粒乳化剂的研究及应用

近年来,颗粒乳化剂因其在食品、采油、化妆品、医药、催化以及功能纳米材料制备等领域具有潜在应用前景而备受关注。本文综述了近来颗粒乳化剂的研究进展,归纳了颗粒乳化剂的种类,包括:无机纳米粒子、表面改性或杂化的无机粒子、有机纳米粒子以及特殊的颗粒乳化剂Janus粒子;并对颗粒乳化剂能够在油水界面稳定吸附的热力学机理和动力学行为进行了阐述,颗粒乳化剂在油水界面接触角以及粒径大小是其在界面稳定吸附的关键参数,而颗粒在油水界面的排布方式则主要受粒子之间相互作用的影响。重点介绍了颗粒乳化剂的热点应用,包括:(1)利用颗粒乳化剂制备Pickering乳液,以及通过对颗粒乳化剂的功能化,使得Pickering乳液具备环境响应性(即pH、盐浓度、温度、紫外光、磁场敏感响应性);(2)以颗粒乳化剂为构筑基元、以Pickering乳液为模板制备Janus颗粒、Colloidosome、具有多级结构的粒子或膜,以及多孔结构材料;(3) Janus粒子在催化领域的应用。     

Pickering emulsions stabilized by hydrophobically modified alginate nanoparticles: Preparation and pH-responsive performance in vitro

pH-responsive Pickering emulsions were prepared, taking the hydrophobic modified calcium alginate nanoparticles (MCA) of pH sensitivity as emulsifiers. The MCAs were obtained via gelation between Ca²⁺ in emulsion and alginate sodium that reacted with diacetone acrylamide since alginate sodium was too hydrophilic to be used as a stabilizer. The effect of MCA characteristics, Ca²⁺ content, and pH on the preparation and property of emulsion was evaluated. Then, the released behaviors of MCA-stabilized emulsion loading oil-soluble drug of curcumin were investigated in vitro. The results demonstrated that Pickering emulsions released curcumin intestine-specifically (37% in 4 hours with a pH of 6.8), compared with the one in the gastric fluid (3% in 4 hours with a pH of 1.5), proving that MCA had similar pH sensitivity to alginates and probably as the promising candidate in oral drug controllable release.     

Simple, reversible emulsion system switched by pH on the basis of chitosan without any hydrophobic modification

Chitosan without hydrophobic modification is not a good emulsifier itself. However, it has a pH-tunable sol-gel transition due to free amino groups along its backbone. In the present work, a simple reversible Pickering emulsion system based on the pH-tunable sol-gel transition of chitosan was developed. At pH > 6.0, as adjusted by NaOH, chitosan was insoluble in water. Chitosan nanoparticles or micrometer-sized floccular precipitates were formed in situ. These chitosan aggregates could adsorb at the interface of oil and water to stabilize the o/w emulsions, so-called Pickering emulsions. At pH < 6.0, as adjusted by HCl, chitosan was soluble in water. Demulsification happened. Four organic solvents (liquid paraffin, n-hexane, toluene, and dichloromethane) were chosen as the oil phase. Reversible emulsions were formed for all four oils. Chitosan-based Pickering emulsions could undergo five cycles of emulsification-demulsification with only a slight increase in the emulsion droplet size. They also had good long-term stability for more than 2 months. Herein, we give an example of chitosan without any hydrophobic modification to act as an effective emulsifier for various oil-water systems. From the results, we have determined that natural polymers with a stimulus-responsive sol-gel transition should be a good particulate emulsifier. The method for in situ formation of pH-responsive Pickering emulsions based on chitosan will open up a new route to the preparation of a wide range of reversible emulsions.     

Elucidation of stabilizing pickering emulsion with jackfruit filum pectin-soy protein nanoparticles obtained by photocatalysis

There is still the dearth of reports of jackfruit filum pectin-based nanoparticles as the Pickering emulsifiers with respect to the applications in foods, cosmetics and medicines. So we fabricated soy protein-jackfruit filum pectin nanoparticles (SPP) by photocatalysis as Pickering emulsifier. Jackfruit filum pectin exhibited lower yield (17.31%), degree of methoxylation (15.53%), but higher galacuronic acid content (74.22%). A strong linkage between pectin and soy protein was formed by photocatalysis. The conjugated polymer could self-assemble into compact near globular nanoparticle. The mean size of SPP was larger than that of soy protein nanoparticles but smaller than that of soy protein-pectin complex without photocatalysis. Besides, the zeta potential of SPP was ?33.8?mV, significantly lower than that of soy protein nanoparticles but higher than that of control sample, further confirming that SPP surfaces were completely covered with pectin molecules. Compared with control sample, the three-phase contact angle increased from 42.7 to 90.6°, indicated that SPP could be developed as effective Pickering emulsifiers. The emulsions stabilized by SPP exhibited high thermal stability and excellent salt tolerance as well as good freeze-thaw stability in comparison with emulsions covered with control sample. These findings would provide a potential way of producing effective Pickering emulsifier.GRAPHICAL ABSTRACT     

Fabrication of macroporous foam and microspheres of polystyrene by Pickering emulsion polymerization

Poly(styrene-co-methacrylic acid) (PS-co-MAA) particles were synthesized via surfactant-free emulsion polymerization and then used as particulate emulsifiers for preparation of Pickering emulsions. Our results showed that adjusting the solution pH can tune the wettability of PS-co-MAA particles to stabilize either water-in-oil (W/O) or oil-in-water (O/W) Pickering emulsions. Stable W/O emulsions were obtained with PS-co-MAA particles at low pH values due to their better affinity to the dispersed oil phase. In contrast, increasing the pH value significantly changed the stabilizing behavior of the PS-co-MAA particles, leading to the phase inversion and formation of stable O/W emulsions. We found that the oil/water ratio had a significant influence on pH value of the phase inversion. It decreased with decreasing the oil/water ratio, and no phase inversion occurred when the styrene volume fraction reduced to 10 %. Additionally, macroporous polystyrene (PS) foam and PS microspheres were obtained via polymerization of Pickering high internal phase emulsion (Pickering HIPE) and O/W Pickering emulsion, respectively.     

Surfactant-Free Multiple Pickering Emulsions Stabilized by Combining Hydrophobic and Hydrophilic Nanoparticles

A series of W/O/W or O/W/O emulsion stabilized solely by two different types of solid nanoparticles were prepared by a two-step method. We explored the option of particular emulsifiers for the multiple Pickering emulsions, and a variety of nanoparticles (silica, iron oxide, and clay) only differing in their wettability was used. The primary W/O emulsion was obtained by the hydrophobic nanoparticles, and then the hydrophilic nanoparticles were used as emulsifier in the secondary emulsification to prepare the W/O/W emulsion. In a similar way, the primary O/W emulsion of the O/W/O emulsion was stabilized by the hydrophilic nanoparticles, while the secondary emulsification to prepare the O/W/O emulsion was effected with the hydrophobic nanoparticles. The resultant multiple Pickering emulsion was stable to coalescence for more than 3 months, except the W/O/W emulsions of which the secondary emulsion stabilized by clay nanoparticles became a simple O/W emulsion in a day after preparation. Moreover, the temperature and pH sensitive poly(N-isopropylacrylamide-co-methacrylic acid) (P(NIPAm-co-MAA)) microgels were introduced as an emulsifier for the secondary emulsification to obtain the stimulus-responsive multiple W/O/W emulsion. Such microgel-stabilized multiple emulsions could realize the efficient controlled release of water-soluble dye, Rhodamine B (RB) on demand in a multiple-emulsion delivery system.      

A novel formulation of the pickering emulsion stabilized with silica nanoparticles and its thermal resistance at high temperatures

Stabilization of emulsions with solid particles can be used in several fields of oil and gas industry because of their higher stability. Solid particles should be amphiphilic to be able to make Pickering emulsions. This goal is achieved by using surfactants at low concentrations. Oil-in-water (o/w) emulsions are usually stabilized by surfactant but show poor thermal stability. This problem limits their applications at high-temperature conditions. In this study, a novel formulation for o/w stabilized emulsion by using silica nanoparticles and the nonionic surfactant is investigated for the formulation of thermally stable Pickering emulsion. The experiments performed on this Pickering emulsion formula showed higher thermal stability than conventional emulsions. The optimum wettability was found for DME surfactant and silica nanoparticles, consequently, in that region; Pickering emulsion showed the highest stability. Rheological changes were evaluated versus variation in surfactant concentration, silica concentration and pH. Scanning electron microscopy images approved the existence of a rigid layer of nanoparticle at the oil-water interface. Finally, the results show this type of emulsion remains stable in harsh conditions and allows the system to reach its optimum rheology without adding any further additives.     

Smart Emulsions Stabilized by a Multi-headgroup Surfactant Tolerant to High Concentrations of Acids and Salts

Retaining emulsions stable at high acidity and salinity is still a great challenge. Here, we report a novel multi-headgroup surfactant (C₃H₇−NH⁺(C₁₀COOH)₂, di-UAPAc) which can be reversibly transformed among cationic, anionic and zwitterionic forms upon pH variation. Stable oil-in-dispersion (OID) emulsions in strong acidity (pH=2) can be co-stabilized by low concentrations of di-UAPAc and silica nanoparticles. High salinity at pH=2 improves the adsorption of di-UAPAc on silica particles through hydrogen bonding, resulting in the transformation of OID emulsions into Pickering emulsions. Moreover, emulsification/demulsification and interconversion between OID and Pickering emulsions together with control of the viscosity and droplet size can be triggered by pH. The present work provides a new protocol for designing surfactants for various applications in harsh aqueous media, such as strong acidity and high salinity, involved in oil recovery and sewerage treatments.     

碱式碳酸铜微球的表面改性和组装

报道了通过分散聚合反应在碱式碳酸铜微球表面锚接聚苯乙烯纳米粒子, 以调节其亲水/亲油性的方法. 结果表明, 锚接的聚苯乙烯纳米粒子尺寸愈大, 所得的改性碱式碳酸铜微球疏水性愈强. 用对油和水润湿性适中的改性碱式碳酸铜微球为乳化剂, 能够制备出稳定的油包水型Pickering乳液. 改性碱式碳酸铜微球组装在Pickering乳液的分散相液滴表面, 形成一个固体壳层. 将Pickering 乳液的分散相水核凝胶化, 合成出分级结构琼脂糖凝胶微球.     

Synthesis of Dual‐Stimuli‐Responsive Microcontainers with Two Payloads in Different Storage Spaces for Preprogrammable Release

Stimuli‐responsive microcontainers have become a major topic of interest, from fundamental aspects to applications in materials science. However, microcontainers that enable the loading of multiple species and programmable release are mostly unexplored. Herein, we describe the design and synthesis of a dual‐responsive organic/inorganic hybrid microcontainer with two payloads in separate storage spaces that is formed by the rapid UV‐initiated polymerization of Pickering emulsions. The stellate mesopore silica nanoparticles with poly(N ‐isopropylacrylamide) grafted inside the mesopores were loaded with one compound (Nile red) and used as Pickering emulsifiers to stabilize oil‐in‐water droplets. Upon UV irradiation, pH‐responsive monomers were polymerized in the presence of 5(6)‐carboxyfluorescein diacetate (CFDA) to form hybrid colloidal microcontainers. The release of Nile red and CFDA could be selectively activated by changing the temperature or pH value.     

Synthesis of millimeter‐sized hydrogel beads by inverse Pickering polymerization using starch‐based nanoparticles as emulsifier

The preparation of millimeter‐sized poly(acrylamide‐co‐acrylic acid) hydrogel beads via inverse Pickering emulsion polymerization using starch‐based nanoparticles (SNPs) as stabilizers is reported. Amphiphilic starch is fabricated by the introduction of butyl glycidyl ether groups and palmitate groups, and the hydrophobically modified SNPs are fabricated by a nanoprecipitation process. The obtained SNPs could adsorb at oil‐water interfaces to stabilize an inverse Pickering emulsion, and the effects of oil/water volume fraction ratio and SNP concentration on emulsions are comprehensively studied. Poly(acrylamide‐co‐acrylic acid) hydrogel beads with a size of approximately 1 mm are obtained by inverse Pickering emulsion polymerization stabilized by SNPs. The morphology and structure of hydrogel beads are extensively investigated, which confirms that SNPs locate on the surface of hydrogel beads and act as emulsifiers and network structures present inside the beads. Polymerization is also detected to investigate the potential formation mechanism of hydrogel beads. The pH‐responsive property of hydrogel beads and its potential application for drug delivery are also explored.     

Pickering emulsions: Versatility of colloidal particles and recent applications

The versatility of colloidal particles endows the particle stabilized or Pickering emulsions with unique features and can potentially enable the fabrication of a wide variety of derived materials. We review the evolution and breakthroughs in the research on the use of colloidal particles for the stabilization of Pickering emulsions in recent years for the particle categories of inorganic particles, polymer-based particles, and food-grade particles. Moreover, based on the latest works, several emulsions stabilized by the featured particles and their derived functional materials, including enzyme immobilized emulsifiers for interfacial catalysis, 2D colloidal materials stabilized emulsions as templates for porous materials, and Pickering emulsions as adjuvant formulations, are also summarized. Finally, we point out the gaps in the current research on the applications of Pickering emulsions and suggest future directions for the design of particulate stabilizers and preparation methods for Pickering emulsions and their derived materials.     

Thermosensitive pickering emulsion stabilized by poly(N-isopropylacrylamide)-carrying particles

Poly(N-isopropylacrylamide) (PNIPAM)-carrying particles were characterized as thermosensitive Pickering emulsifiers. Emulsions were prepared from various oils, such as heptane, hexadecane, trichloroethylene, and toluene, with PNIPAM-carrying particles. PNIPAM-carrying particles preferentially formed oil-in-water (O/W)-type emulsions with a variety of oils. All the emulsions stabilized by PNIPAM-carrying particles were stable for more than 3 months as long as they were stored at room temperature. However, when the emulsions were heated from room temperature to 40 degrees C, at which point the PNIPAM layer caused a coil-to-globule transition, phase separation occurred. Thus, by using thermosensitive PNIPAM-carrying particles as emulsifiers, the stability of the Pickering emulsions could be controlled by a slight change in temperature.     

Enzyme-Polymer-Conjugate-Based Pickering Emulsions for Cell-Free Expression and Cascade Biotransformation

In this study, we addressed the limitations of conventional enzyme-polymer-conjugate-based Pickering emulsions for interfacial biocatalysis, which traditionally suffer from nonspecific and uncontrollable conjugation positions that can impede catalytic performance. By introducing a non-canonical amino acid (ncAA) at a specific site on target enzymes, we enabled precise polymer-enzyme conjugation. These engineered conjugates then acted as biocatalytically active emulsifiers to stabilize Pickering emulsions, while encapsulating a cell-free protein synthesis (CFPS) system in the aqueous phase for targeted enzyme expression. The resulting cascade reaction system leveraged enzymes expressed in the aqueous phase and on the emulsion interface for optimized chemical biosynthesis. The use of the cell-free system eliminated the need for intact whole cells or purified enzymes, representing a significant advancement in biocatalysis. Remarkably, the integration of Pickering emulsion, precise enzyme-polymer conjugation, and CFPS resulted in a fivefold enhancement in catalytic performance as compared to traditional single-phase reactions. Therefore, our approach harnesses the combined strengths of advanced biochemical engineering techniques, offering an efficient and practical solution for the synthesis of value-added chemicals in various biocatalysis and biotransformation applications.     

Interfacial dynamics and rheology of polymer-grafted nanoparticles at air-water and xylene-water interfaces

Particle-stabilized emulsions and foams offer a number of advantages over traditional surfactant-stabilized systems, most notably a greater stability against coalescence and coarsening. Nanoparticles are often less effective than micrometer-scale colloidal particles as stabilizers, but nanoparticles grafted with polymers can be particularly effective emulsifiers, stabilizing emulsions for long times at very low concentrations. In this work, we characterize the long-time and dynamic interfacial tension reduction by polymer-grafted nanoparticles adsorbing from suspension and the corresponding dilatational moduli for both xylene-water and air-water interfaces. The dilatational moduli at both types of interfaces are measured by a forced sinusoidal oscillation of the interface. Surface tension measurements at the air-water interface are interpreted with the aid of independent ellipsometry measurements of surface excess concentrations. The results suggest that the ability of polymer-grafted nanoparticles to produce significant surface and interfacial tension reductions and dilatational moduli at very low surface coverage is a key factor underlying their ability to stabilize Pickering emulsions at extremely low concentrations.     

Macroporous polymers obtained in highly concentrated emulsions stabilized solely with magnetic nanoparticles

Magnetic macroporous polymers have been successfully prepared using Pickering high internal phase ratio emulsions (HIPEs) as templates. To stabilize the HIPEs, two types of oleic acid-modified iron oxide nanoparticles (NPs) were used as emulsifiers. The results revealed that partially hydrophobic NPs could stabilize W/O HIPEs with an internal phase above 90%. Depending upon the oleic acid content, the nanoparticles showed either an arrangement at the oil-water interface or a partial dispersion into the oil phase. Such different abilities to migrate to the interface had significant effects on the maximum internal phase fraction achievable and the droplet size distribution of the emulsions. Highly macroporous composite polymers were obtained by polymerization in the external phase of these emulsions. The density, porosity, pore morphology and magnetic properties were characterized as a function of the oleic acid content, concentration of NPs, and internal phase volume of the initial HIPEs. SEM imaging indicated that a close-cell structure was obtained. Furthermore, the composite materials showed superparamagnetic behavior and a relatively high magnetic moment.     

pH- and Redox-Responsive Pickering Emulsions Based on Cellulose Nanocrystal Surfactants

Nanoparticle surfactants (NPSs), formed by using dynamic interactions between nanoparticles and complementary ligands at the liquid-liquid interface, have emerged as “smart emulsifiers” with attributes of high emulsification efficiency, long-term stability, and on-demand emulsification/demulsification capabilities. However, only pH-responsiveness can be adopted for the assembly of reported NPSs formed by electrostatic interactions. Here, we propose an alternative design strategy, by taking advantage of the ferrocenium (Fc⁺) sulfate ion pair, to develop a new type of cellulose nanocrystal (CNC) surfactant. The Fc⁺ groups are sensitive to pH, redox reagents and voltage, imparting the CNC surfactants and derived Pickering emulsions with multi-stimuli-responsiveness, and showing promising applications in controllable delivery, release, and biphasic biocatalysis.     

Rings of nanoparticle-decorated honeycomb-structured polymeric film: the combination of pickering emulsions and capillary flow in the breath figures method

The self-assembly of nanoparticles at the fluid/fluid interface (Pickering emulsions) in the breath figures (BF) method have been explored to direct nanoparticles onto BF microarrays and adjust the BF assembly in microsize. Circular rings of nanoparticle-decorated honeycomb-structured polymeric film can be obtained by a one-step process. The combination of Pickering emulsions and capillary flow in the BF method may be responsible for the formation of this intriguing structure.     

Pickering emulsions stabilized by anatase nanoparticles

Abstract  

Oil-in-water emulsions can be stabilized by solid particles. These so-called Pickering emulsions are regularly used in many technological applications. Here we describe the efficiency of sol–gel-synthesized anatase nanoparticles with a diameter of 6 nm in stabilizing emulsions. Key parameters were the surface charge of the particles—depending on pH and salt concentration—and their contact angle—depending on the surface groups and the polarity of the oil phase. The effect of these properties on the stability of the emulsions was investigated. The sol–gel nanoparticles were most efficient in stabilizing emulsions at pH 3 (depending on the salt and particle concentration). Highly apolar oil phases (cyclohexane, n-hexane) were required to obtain stable emulsions with the investigated system and addition of salt or hydrophobic coupling molecules in the oil phase, such as long alkyl chain containing phosphonates, increased the stability of the emulsions.