Alkylation of acetylene by tert-butyl alcohol

A reaction of acetylene with tert-butyl alcohol in the presence of sulfuric acid leads to tert-butylacetylene.     

Detoxification of lignocellulose hydrolysates with ion-exchange resins

Lignocellulose hydrolysates contain fermentation inhibitors causing decreased ethanol production. The inhibitors include phenolic compounds, furan aldehydes, and aliphatic acids. One of the most efficient methods for removing inhibiting compounds prior to fermentation is treatment of the hydrolysate with ion-exchange resins. The performance and detoxification mechanism of three different resins were examined: an anion exchanger, a cation exchanger, and a resin without charged groups (XAD8). A dilute acid hydrolysate of spruce was treated with the resins at pH 5.5 and 10.0 prior to ethanolic fermentation with Saccharomyces cerevisiae. In addition to the experiments with hydrolysate, the effect of the resins on selected model compounds, three phenolics (vanillin, guaiacol, and coniferyl aldehyde) and two furan aldehydes (furfural and hydroxymethyl furfural), was determined. The cation exchanger increased ethanol production, but to a lesser extent than XAD-8, which in turn was less effective than the an ion exchanger. Treatment at pH 10.0 was more effective than at pH 5.5. At pH 10.0, the anion exchanger efficiently removed both anionic and uncharged inhibitors, the latter by hydrophobic interactions. The importance of hydrophobic interactions was further indicated by a substantial decrease in the concentration of model compounds, such as guaiacol and furfural, after treatment with XAD-8.     

Photosensitization of poly(vinyl alcohol)/cerium complexes to produce ion-exchange resins by graft copolymerization

Acrylamide can be graft copolymerized onto poly(vinyl alcohol) in aqueous solution with initiation by cerium(IV) under acid conditions in order to produce an appropriately functionalized polymer directly or by subsequent chemical modification. Initiation proceeds through the decomposition of a complex between the PVA1 and Ce(IV) and under normal conditions occurs only through the 1, 2-glycol units in the PVA1. Illumination by light in the absorption wavelength range of the complex accelerates the rate of graft copolymerization. Moreover, initiation now proceeds through the 1,3-glycol units.     

Phenol alkylation with tert-butyl alcohol catalyzed by HM zeolite

Zeolite HM has a potential application in phenol alkylation with tert-butyl alcohol to produce p-TBP and 2,4-DTBP with high activity and selectivity.     

Kinetics and mechanism of alkane hydroperoxidation with tert-butyl hydroperoxide catalysed by a vanadate anion

tert-Butyl hydroperoxide oxidizes alkanes in acetonitrile at 60 degrees C if the soluble vanadium(v) salt, n-Bu4NVO3, is used as a catalyst. Alkyl hydroperoxides are formed as main products which decompose during the course of the reaction to produce the more stable corresponding alcohols and ketones. Turnover numbers (ie. numbers of moles of products per one mole of a catalyst) attained 250. The kinetics and selectivity of the reaction have been studied. The mechanism proposed involves the formation of a complex between the V(V) species and t-BuOOH (K5 was estimated to be 5 dm3 mol(-1)) followed by decomposition of this complex (k6 = 0.2 s(-1)). The generated V(IV) species reacts with another t-BuOOH molecule to produce an active t-BuO* radical which attacks the hydrocarbon.     

Uricase-like catalytic activity of ion-exchange resins modified with metalloporphyrins

The uricase-like catalytic activity of the ion-exchange resins modified with metalloporphyrins has been investigated through the oxidation of uric acid. The anion-exchange resins modified with Mn(3+)-tetrakis(sulfophenyl)porphine and the cation-exchange resin modified with Mn(3+)-tetrakis(1-methylpyridinium-4-yl)porphine exhibited the highest uricase-like activity among the modified resins tested. The fact that these resins accelerated the oxidation of uric acid even after ten cycles of use indicates that the modified resins act as catalysts in the reaction catalysed by uricase. Some of the modified resins may be effectively used for the determination of uric acid in place of uricase.     

Decontamination of spent ion-exchange resins contaminated with cesium radionuclides

Possible causes of the occurrence of radioactive contamination irremovable by acid–base regeneration of ion-exchange resins used in treatment of process media and liquid radioactive waste have been studied. It has been found that most of the irremovable cesium radionuclides are bound to inorganic deposits on the surface and in the bulk of ion-exchange resin granules. The nature of inorganic inclusions has been investigated on real and model spent ion-exchange resins (SIER). A method has been proposed for decontaminating SIER using resorcinol–formaldehyde resins selective to cesium radionuclides. Such an approach has been shown to be promising for deep decontamination of SIER.     

Comparison of chromatographic ion-exchange resins VI. Weak anion-exchange resins

A comparative study on weak anion exchangers was performed to investigate the pH dependence, binding strength, particle size distribution, and static and dynamic capacity of the chromatographic resins. The resins tested included: DEAE Sepharose FF, Poros 50 D, Fractogel EMD DEAE (M), MacroPrep DEAE Support, DEAE Ceramic HyperD 20, and Toyopearl DEAE 650 M. Testing was performed with five different model proteins: Anti-FVII mAb (immunoglobulin G), aprotinin, bovine serum albumin (BSA), Lipolase (Novozymes), and myoglobin. Retention showed an expected increasing trend as a function of pH for proteins with low pI. A decrease in retention was observed for some resins at pH 9 likely due to initiation of deprotonation of the weak anion-exchange ligands. Expected particle size distribution was obtained for all resins compared to previous studies. Binding strength to weak anion-exchange resins as a function of ionic strength depends on the specific protein. Binding and elution at low salt concentration may be performed with Toyopearl DEAE 650 M, while binding and elution at high salt concentration may be performed with MacroPrep DEAE Support. Highest binding capacities were generally obtained with Poros 50 D followed by DEAE Ceramic HyperD 20. A general good agreement was obtained between this study and data obtained by the suppliers. Verification of binding strength trends with model proteins was achieved with human growth hormone (hGH) and a hGH variant on the same resins with different elution salts, sodium chloride, sodium hydrogenphosphate, sodium sulphate, and sodium acetate. Static capacity measurements obtained in the traditional experimental set-up were compared with high-throughput screening (HTS) technique experiments with reasonable agreement. Isotherm data obtained from HTS techniques and pulse experiments were successfully combined with mathematical modelling to simulate, develop and optimise the separation process of two model proteins, Lipolase and BSA. The data presented in this paper may be used for selection of resins for testing in process development.     

Separation of hemoglobin variants by ion-exchange chromatography on Monobead resins

Our studies on the separation of hemoglobin variants using Monobead ion exchangers show that these ion exchangers will resolve variants that heretofore could not be resolved. Procedures with these ion exchangers, therefore, extend our ability to detect hemoglobinopathies. Since it is also important to study the physicochemical properties of variants, their isolation is of critical importance to the researcher. The methods described in this report enable variants to be isolated in quantitative amounts so that such studies can be performed. Most isolations can be accomplished within 1 h, under mild conditions with aqueous buffers. Elution gradients can be changed conveniently to optimize resolution of most variants. These methods should serve as a valuable adjunct in studying the structure-function relationship of hemoglobin and other proteins.     

Mobility of solid tert-butyl alcohol studied by deuterium NMR

The molecular mobility of solid deuterated tert-butyl alcohol (TBA) has been studied over a broad temperature range (103–283 K) by means of solid-state 2H NMR spectroscopy, including both line shape and anisotropy of spin–lattice relaxation analyses. It has been found that, while the hydroxyl group of the TBA molecule is immobile on the 2H NMR time scale (τC > 10(–5) s), its butyl group is highly mobile. The mobility is represented by the rotation of the methyl [CD3] groups about their 3-fold axes (C3 rotational axis) and the rotation of the entire butyl [(CD3)3-C] fragment about its 3-fold axis (C3′ rotational axis). Numerical simulations of spectra line shapes reveal that the methyl groups and the butyl fragment exhibit three-site jump rotations about their symmetry axes C3 and C3′ in the temperature range of 103–133 K, with the activation energies and preexponential factors E1 = 21 ± 2 kJ/mol, k(01) = (2.6 ± 0.5) × 10(12) s(–1) and E2 = 16 ± 2 kJ/mol, k(02) = (1 ± 0.2) × 10(12) s(–1), respectively. Analysis of the anisotropy of spin–lattice relaxation has demonstrated that the reorientation mechanism of the butyl fragment changes to a free diffusion rotational mechanism above 173 K, while the rotational mechanism of the methyl groups remains the same. The values of the activation barriers for both rotations at T > 173 K have the values, which are similar to those at 103–133 K. This indicates that the interaction potential defining these motions remains unchanged. The obtained data demonstrate that the detailed analysis of both line shape and anisotropy of spin–lattice relaxation represents a powerful tool to follow the evolution of the molecular reorientation mechanisms in organic solids.     

Sugar separations on ion-exchange resins in mixture with celite

The Chromatographie separation of sugars in ethanol -water solutions by means of anion-excliange resins can be improved markedly by using extremely fine resin particles. To avoid an excessively high pressure drop in the column when crushed rosin particles are employed the resin can be used in mixture with Celite, Working at elevated température results in improved separations and a considerable saving of time.