Influence of NaY on the morphology and conductivity characteristics of poly(ethylene oxide)-LiClO4 electrolyte with plasticizer EC

A novel solid-state composite polymer electrolyte (CPE), based on a polymer, poly(ethylene oxide) (PEO), alkali metal salts, and NaY molecular sieve powders with a small amount of low molecular weight plasticizer, ethylene carbonate (EC) is investigated. (PEO)₁₆LiClO₄ polymer metal salt complexes with 5 wt% EC, and different content of NaY are prepared by the solution casting technology. The crystallization characteristic, surface morphology, and ionic conductivity of the CPE systems are studied using X-ray diffractometer (XRD) analysis, scanning electron microscopy (SEM), energy dispersive spectrometer, and impedance spectroscopy. It is found that NaY incorporation has a beneficial effect on the enhancement of ionic conductivity, increasing two orders of magnitude. XRD spectra show that the NaY has a major influence on the crystallization process of polymer matrix. By incorporating NaY, the crystallinity degree of PEO matrix obviously decreases. SEM images show a dramatic modification of surface morphology, the surface spherulites of polymer matrix disappear, and ultra-branched and cross-linked framework structure forms, which play an important role in ion transport and enhancing the tensile strength (TS). The TS is achieved 2.12 MPa with the content of 35 wt% NaY, far higher than the 0.17 MPa with (PEO)₁₆LiClO₄–5 wt% EC. In addition, it is demonstrated for the first time that EC affects the network structure of the molecular sieve and leads to exhibit enhanced ionic conductivity of electrolyte maintaining for a long time.     

Ionic conductivity of polymer electrolytes based on phosphate and polyether copolymers

Linear polyphosphate random copolymers (LPC) composed of phosphate as a linking agent with poly(ethylene glycol) (PEG) and/or poly(tetramethylene glycol) (PTMG) were synthesized to increase local segmental motion for improved ion transport. Ionic conductivity and thermal behavior of LPC series–LiCF₃SO₃ complexes were investigated with various compositions, salt concentrations and temperatures. The PEG(70)/PTMG(30)/LiCF₃SO₃ electrolyte exhibited ionic conductivity of 8.04×10⁻⁵ S/cm at 25°C. Salt concentration with the highest ionic conductivity was considerably dependent on EO/TMO compositions in LPC series–salt systems. Relationship between solvating ability and chain flexibility with various compositions and salt concentrations was investigated through theoretical aspects of the Adam–Gibbs configurational entropy model. Temperature dependence on the ionic conductivity in LPC6 series–salt systems suggested the ion conduction follows the Williams–Landel–Ferry (WLF) mechanism, which is confirmed by Vogel–Tamman–Fulcher (VTF) plots. The ionic conductivity was affected by segmental motion of the polymer matrix. VTF parameters and apparent activation energy were evaluated by a non-linear least square minimization method. These results suggested that the solvating ability of the host polymer might be a dominant factor to improve the ionic conductivity rather than chain mobility.     

PVDF–PEO/ZSM-5 based composite microporous polymer electrolyte with novel pore configuration and ionic conductivity

A novel composite microporous polymer electrolyte based on poly(vinylidene fluoride), poly(ethylene oxide), and microporous molecular sieves ZSM-5 (denoted as PVDF–PEO/ZSM-5) was prepared by a simple phase inversion technique. PEO can obviously improve the pore configuration, such as pore size, porosity, and pore connectivity of PVDF-based microporous membranes, results in a high room temperature ionic conductivity. Microporous molecular sieves ZSM-5 can further improve the mechanical strength of PVDF–PEO blends and form special conducting pathway in PVDF–PEO matrix by absorb liquid electrolyte in its two-dimensional interconnect channels. The high room temperature ionic conductivity combined with good mechanical strength implies that PVDF–PEO/ZSM-5 based composite microporous polymer electrolyte can be used as candidate electrolyte and/or separator material for high-performance rechargeable lithium batteries.     

Ion conductive characteristics of cross-linked network polysiloxane-based solid polymer electrolytes

A series of cross-linked network polysiloxanes containing oligoethylene oxide units, (OCH₂CH₂)_n, as internal free chains have been synthesized by performing hydrosilylation of partially PEO-substituted polysiloxane precursor with , ω-diallyl terminated poly(ethylene glycol). The polymer electrolytes were formed by complexing with LiN(CF₃SO₂)₂ electrolyte salt and exhibited superior conductive property. The σ_RT of the network polymer electrolytes is in the range of 2.50×10⁻⁵ to 1.62×10⁻⁴ S/cm and depends on the cross-linking density (in terms of Si–H amount of the siloxane precursor), repeating unit number of internal oligoethylene oxide and chain length of the cross-linker. The significant enhancement of the conductivity was observed when low molecular weight dimethyl poly(ethylene glycol) was added as plasticizer. The temperature dependence of the ionic conductivity was also studied, following the Vogel–Tamman–Fulcher (VTF) equation.     

Effect of plasticizer on microstructure and electrical properties of a sodium ion conducting composite polymer electrolyte

A plasticized composite polymer electrolyte (PCPE) based on Poly (ethylene oxide) + NaI with Na₂SiO₃ as the ceramics filler and Poly (ethylene glycol) as the plasticizer has been prepared by solution cast technique. Effect of plasticization on microstrucutre and electrical properties of the materials has been investigated. The changes in the structural and microstructural properties of the material have been investigated by XRD and SEM studies. The electrical conductivity estimated using a. c. impedance spectroscopy was found to be dependent on plasticizer concentration. An enhancement in the ionic conductivity value by three times has been recorded on addition of plasticizer when compared with that of unplasticized composite polymer electrolyte. The temperature dependence of conductivity of the polymer films is found to obey the Arrhenius behavior below and above the melting temperature of PEO. The electrical transport has been found to be a thermally activated process with ions being the predominant charge carrier.     

Combined effect of nanochitosan and succinonitrile on structural, mechanical, thermal, and electrochemical properties of plasticized nanocomposite polymer electrolytes (PNCPE) for lithium batteries

A sequence of novel plasticized polymer nanocomposite electrolyte systems based on polyethylene oxide (PEO) as polymer host, LiCF₃SO₃ as salt, and a variety of concentrations of nanochitosan as inert filler, succinonitrile as a solid non-ionic plasticizer has been prepared. The prepared membranes were subjected to X-ray diffraction, FT-IR, tensile strength, morphological studies, thermal analysis, AC ionic conductivity measurement, and interfacial analyses. The combined effect of succinonitrile and nanochitosan on the electrochemical properties of polymer electrolytes has been studied, and it was confirmed that the ionic conductivity is significantly increased. The maximum ionic conductivity of the plasticized nanocomposite polymer electrolytes are found to be in the range of 10^?2.8?S/cm. Besides, the interfacial stability also shows a significant improvement. The tensile measurement and thermal analysis results illustrate that the electrolytes based on that polymer host possess good mechanical and thermal stabilities.     

Effects of plasticizer and nanofiller on the dielectric dispersion and relaxation behaviour of polymer blend based solid polymer electrolytes

Solid polymer electrolytes consisted of poly(ethylene oxide) (PEO) and poly(methyl methacrylate) (PMMA) blend (50:50 wt/wt%) with lithium triflate (LiCF₃SO₃) as a dopant ionic salt at stoichiometric ratio [EO + (CO)]:Li⁺ = 9:1, poly(ethylene glycol) (PEG) as plasticizer (10 wt%) and montmorillonite (MMT) clay as nanofiller (3 wt%) have been prepared by solution cast followed by melt–pressing method. The X–ray diffraction study infers that the (PEO–PMMA)–LiCF₃SO₃ electrolyte is predominantly amorphous, but (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG electrolyte has some PEO crystalline cluster, whereas (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG–3 wt% MMT electrolyte is an amorphous with intercalated and exfoliated MMT structures. The complex dielectric function, ac electrical conductivity, electric modulus and impedance spectra of these electrolytes have been investigated over the frequency range 20 Hz to 1 MHz. These spectra have been analysed in terms of the contribution of electrode polarization phenomenon in the low frequency region and the dynamics of cations coordinated polymer chain segments in the high frequency region, and also their variation on the addition of PEG and MMT in the electrolytes. The temperature dependent dc ionic conductivity, dielectric relaxation time and dielectric strength of the plasticized nanocomposite electrolyte obey the Arrhenius behaviour. The mechanism of ions transportation and the dependence of ionic conductivity on the segmental motion of polymer chain, dielectric strength, and amorphicity of these electrolytes have been explored. The room temperature ionic conductivity values of the electrolytes are found ∼10⁻⁵ S cm⁻¹, confirming their use in preparation of all-solid-state ion conducting devices.     

A novel PEO-based composite polymer electrolyte with NaAlOSiO molecular sieves powders

Ion-conducting thin film polymer electrolytes based on poly(ethylene oxide) (PEO) complexes with NaAlOSiO molecular sieves powders has been prepared by solution casting technique. X-ray diffraction, scanning electron microscopy, differential scanning calorimeter, and alternating current impedance techniques are employed to investigate the effect of NaAlOSiO molecular sieves on the crystallization mechanism of PEO in composite polymer electrolyte. The experimental results show that NaAlOSiO powders have great influence on the growth stage of PEO spherulites. PEO crystallization decrease and the amorphous region that the lithium-ion transport is expanded by adding appropriate NaAlOSiO, which leads to drastic enhancement in the ionic conductivity of the (PEO)₁₆LiClO₄ electrolyte. The ionic conductivity of (PEO)₁₆LiClO₄-12 wt.% NaAlOSiO achieves (2.370 ± 0.082) × 10⁻⁴ S · cm⁻¹ at room temperature (18 °C). Without NaAlOSiO, the ionic conductivity has only (8.382 ± 0.927) × 10⁻⁶ S · cm⁻¹, enhancing 2 orders of magnitude. Compared with inorganic oxide as filler, the addition of NaAlOSiO molecular sieves powders can disperse homogeneously in the electrolyte matrix without forming any crystal phase and the growth stage of PEO spherulites can be hindered more effectively.     

High performance PEO-based polymer electrolytes and their application in rechargeable lithium polymer batteries

Solvent-free, lithium-ion-conducting, composite polymer electrolytes have been prepared by a double dispersion of an anion trapping compound, i.e., calyx(6)pyrrole, CP and a ceramic filler, i.e., super acid zirconia, S-ZrO₂ in a poly(ethylene oxide)-lithium bis(oxalate) borate, PEO–LiBOB matrix. The characterization, based on differential thermal analysis and electrochemical analysis, showed that while the addition of the S-ZrO₂ has scarce influence on the transport properties of the composite electrolyte, the unique combination of the anion-trapping compound, CP, with the large anion lithium salt, LiBOB, greatly enhances the value of the lithium transference number without depressing the overall ionic conductivity. These unique properties make polymer electrolytes, such as PEO₂₀LiBOB(CP)_0.125, of practical interest, as in fact confirmed by tests carried out on lithium battery prototypes.     

Polymer electrolytes based on vinyl ethers with various EO chain length and their polymer electrolytes cross-linked by electron beam irradiation

Polymer electrolytes based on vinyl ethers with various ethyleneoxy (EO) chain length (poly-1a (m?=?3), poly-1b (m?=?6), poly-1c (m?=?10), and poly-1d (m?=?23.5)) with lithium bis(trifluoromethanesulfonimide) (LiTFSI) were prepared, and effect of pendant EO chain length in the polymers on electrochemical and thermal properties was investigated. Glass transition temperature (T _g) of all polymer electrolytes increased linearly with an increase in salt concentrations. Ionic conductivities of the polymer electrolytes increased with an increase in the pendant EO chain length of the polymers at the constant [Li]/[O] ratio, but in the polymer electrolyte of the poly-1d (m?=?23.5) with the longest pendant EO chain length, ionic conductivity decreased in the low temperature range of ?20 to 10 °C due to the crystallization of the pendant EO chain. The highest ionic conductivity, 1.23?×?10^?4 S/cm at 30 °C, was obtained in the polymer electrolyte of the poly-1c (m?=?10) with pendant EO chain length of 10 at the [Li]/[O] ratio of 1/20. It was found that the cross-linking of the polymer electrolyte, composed of poly-1c (m?=?10) with LiTFSI at the [Li]/[O] ratio of 1/28, by electron beam (EB) irradiation may improve the mechanical property without affecting ionic conductivity, thermal property, and oxidation stability. Polymer electrolytes based on poly-1a (m?=?3), poly-1b (m?=?6), poly-1c (m?=?10), and poly-1d (m?=?23.5) and cross-linked polymer electrolytes were electrochemically stable until 4 V and thermally stable around 300 °C.     

Lithium garnet oxide dispersed polymer composite membrane for rechargeable lithium batteries

Free-standing composite polymer membranes comprising of high molecular weight poly (ethylene oxide) (PEO) complexed with lithium perchlorate (LiClO₄) and Li₆La₂BaTa₂O₁₂ (LLBTO) garnet oxide as filler were developed via standard solution-casting method. The as-synthesized composite membranes were investigated through powder x-ray diffraction (PXRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and impedance spectroscopy techniques for their phase, thermal, morphological, and electrical properties, respectively. The lithium ion conductivity of polymer composite membranes consisting of PEO₈/LiClO₄ with various weight percents (5, 10, 15, 20, 25, and 30) of LLBTO were evaluated. We demonstrated a significant enhancement in Li⁺ conductivity with the addition of LLBTO to the polymer-lithium salt complex. Among the investigated membranes, the composite containing 20 LLBTO wt% garnet oxide exhibits maximized room temperature (30 °C) Li⁺ conductivity of 2.03 × 10^?4 S cm^?1 and electrochemical stability greater than 4.5 V.     

PEG crosslinked poly(vinylbenzene boronic acid) polymer electrolytes for Li-ion batteries

Poly(4-vinylbenzeneboronic acid), PVBBA was synthesized via free-radical polymerization of 4-vinylbenzeneboronic acid (4-VBBA) and followed by crosslinking with polyethylene glycol (PEG) with different molecular weights to produce boron containing crosslinked polymers. Prior to crosslinking, the materials were doped with CF₃SO₃Li at several stoichiometric ratios to get PVBBAPEGX-Y where X is the molecular weight of PEG and Y is the EO/Li ratio. The materials were characterized by using Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and differential scanning calorimeter (DSC). The ionic conductivity of these novel crosslinked electrolytes was studied by dielectric-impedance spectroscopy. Li-ion conductivity of these polymer electrolytes depends on the length of the side units as well as the doping ratio. PVBBAPEG200-10 illustrated a satisfactory ionic conductivity of 3.1 × 10^?5 S/cm at 20 °C and 1.8 × 10^?3 S/cm at 100 °C.     

Dielectric spectroscopy and confirmation of ion conduction mechanism in direct melt compounded hot-press polymer nanocomposite electrolytes

Solid-type polymer nanocomposite electrolyte (PNCE) comprising poly(ethylene oxide) (PEO), lithium perchlorate (LiClO₄) and montmorillonite (MMT) nano-platelets were synthesized by direct melt compounded hot-press technique at 70 °C under 3 tons of pressure. The spectra of complex dielectric function, electric modulus and alternating current (ac) electrical conductivity, and complex impedance plane plots of these materials were investigated in the frequency range 20 Hz to 1 MHz at ambient temperature. The variation of electrode polarization and ionic conduction relaxation times with MMT concentration up to 20 wt.% confirms their strong correlation with direct current ionic conductivity. The predominance of exfoliated MMT structures in PEO matrix and their effect on cation conduction mechanism and ion pairing were discussed by considering a supramolecular transient cross-linked structure. The normalized ac conductivity as a function of scaled frequency of these PNCE materials obey the universal time–concentration superposition behaviour alike the disordered solid ionic conductors.     

Lithium ionic conduction in poly (methacrylic acid)-poly (ethylene oxide) complex containing lithium perchlorate

Polymeric solid electrolytes were prepared by dispersing homogeneously lithium perchlorate in a hydrogen-bonding type intermacromolecular complex of poly(methacrylic acid)-poly(ethylene oxide). They showed ionic conductivity of more than 10^-6 (S/cm) at room temperature. The conductivity depended on the molecular weight of the poly(ethylene oxide), the proportion of poly(ethylene oxide) and lithium perchlorate, and so on. Poly(ethylene oxide) with average molecular weights ranging from 400 to 2 × 10⁴ were used to clarify the effect of chain length on the conductivity. The conductivity increased and the flexibility of the films improved with increasing the content of poly(ethylene oxide) with average molecular weight of 400. The maximum conductivity of 1.3 × 10^-5 (S/cm) at 60°C was obtained for the flexible film when the composition of poly(methacrylic acid)/poly(ethylene oxide)/lithium perchlorate was in the ratio of 17.0/ 68.0/15.0 in unit mol%.     

Ionic conductivity of LiX-oligo(ethylene oxide)-perfluoro polymer ternary hybrids

Polymeric solid electrolytes were prepared from inorganic lithium salts, endo-acetylated oligo(ethylene oxide) and polyanions with perfluoro(ethylene) main chain. High ionic conductivity was found when these ternary hybrids took micro-segregated structures with continuous cylindrical conduction columns of lithium salt-oligo(ethylene oxide) in the sea of perfluoro-poly(electrolytes). The ionic conductivity of more than 10^?5 S/cm was established at room temperature without affecting the processibility and flexibility of resulting hybrid films.     

Impedance spectroscopy of carbon nanotube/solid polymer electrolyte composites

New composite polymer electrolytes (CPE) have been prepared by a solution-casting technique, using polyethylene oxide, lithium hexafluorate (LiPF₆) as the doping salt, ethylene carbonate (EC) as the plasticizer and amorphous carbon nanotubes (αCNTs) as the filler. The crystallinity and ionic conductivity of the CPE are examined. Differential scanning calorimetry shows a decrease in melting temperature and crystallinity upon the addition of LiPF₆, EC and αCNTs to the polymer electrolyte system. The addition of salt increases the conductivity up to 10⁻⁵ S cm⁻¹. The incorporation of EC and αCNTs into the salted polymer shows a significant conductivity increase of 10⁻⁴ and 10⁻³ S cm⁻¹. The complexation process is examined using Fourier transform infrared spectroscopy. The Vogel-Tamman-Fulcher (VTF) plots suggest that the temperature dependence of conductivity is a thermally activated process.     

Electrical characterization of nano-composite polymer gel electrolytes containing NH4BF4 and SiO2: role of donor number of solvent and fumed silica

Nano-composite polymer gel electrolytes were synthesized by using polyethylene oxide (PEO), ammonium tetrafluoroborate (NH₄BF₄), fumed silica (SiO₂), dimethylacetamide (DMA), ethylene carbonate (EC), and propylene carbonate (PC) and characterized by conductivity studies. The effect of donor number of solvent on ionic conductivity of polymer gel electrolytes has been studied. The mechanical strength of the gel electrolytes has been increased with the addition of nano-sized fumed silica along with an enhancement in conductivity. Maximum room temperature ionic conductivity of 2.63 × 10⁻³ and 2.92 × 10⁻³ S/cm has been observed for nano-composite gel electrolytes containing 0.1 and 0.5 wt% SiO₂ in DMA+1 M NH₄BF₄+10 wt% PEO, respectively. Nano-composite polymer gel electrolytes having DMA have been found to be thermally and electrically stable over 0 to 90 °C temperature range. Also, the change in conductivity with the passage of time is very small, which may be desirable to make applicable for various smart devices.

     

Organic-inorganic nanocomposite materials prepared by the sol-gel route as new ionic conductors in quasi solid state electrolytes

Nanocomposite organic/inorganic materials made through sol-gel method exhibit high values of ionic conductivity when they were impregnated with the redox couple I ₃ ⁻ /I⁻ Two different kinds of nanocomposite materials, depending on the different interactions between silica and poly(ethylene)oxide or poly(propylene)oxide blends, were prepared by the sol-gel technique in room temperature. Gels, for both nanocomposite materials, were obtained by acetic acid catalyzed solvolysis and were regulated by formation of intermediate products, such as silicon ester and -Si-O-Si-oligomers. Time-resolved fluorescence techniques and conductivity measurements were performed in order to define the parameters which allow maximum probe mobility and minimum confinement conditions with the aim to apply these materials in quasi solid state electrolytes. Paper presented at the Patras Conference on Solid State Ionics — Transport Properties, Patras, Greece, Sept. 14 – 18, 2004.     

Effects of plasticiser on the lithium ionic conductivity of polymer electrolyte PVC-LiCF3SO3

Solid polymer electrolyte films based on poly(vinyl chloride)-lithium triflate (PVC-LiCF₃SO₃) have been prepared by the solution-cast technique in various concentrations. The film with the highest conductivity was used to prepare plasticised polymer electrolyte films by using poly(ethlene glycol) (PEG) of different molecular weights, i.e., 200, 400 and 600 gmol⁻¹. These films were prepared to study the effects of addition of low molecular weights PEG on the lithium ionic conduction of the PVC based polymer electrolyte. The films were characterised by electrochemical impedance spectroscopy (EIS) and Fourier transform infrared-spectroscopy (FTIR). Results indicate that the molecular weight has an inverse effect on the conductivity and this has been accounted for by FTIR. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

An experimental study on the effect of mesoporous silica addition on ion conductivity of poly(ethylene oxide) electrolytes

Solid polymer electrolyte (SPE) composites, which are composed of poly(ethylene oxide) (PEO), mesoporous silica (SBA-15), and lithium salt were prepared in order to investigate the influence of SBA-15 content on the ionic conductivity of the composites. The ionic conductivity of the SPE composites was monitored by frequency response analyzer (FRA), and the crystallinity of the SPE composites was evaluated by using XRD. As a result, the addition of SBA-15 to the polymer mixture inhibited the growth of PEO crystalline domain, due to the mesoporous structure of the SBA-15. Also, the PEO₁₆LiClO₄/SBA-15 composite electrolytes show an increased ion conductivity as a function of SBA-15 content up to 15 wt.%. These ion conductivity characteristics are dependent on crystallinity with SBA-15 content.