Theoretical Treatment of CH3NH3PbI3 Perovskite Solar Cells

Hybrid halide perovskite solar cells (PSCs) giving over 22 % power conversion efficiencies (PCEs) have attracted considerable attention. Although perovskite plays a significant role in the operation of PSCs, the fundamental theories associated with perovskites have not been resolved in spite of the increase in research. In this Minireview, we assess the current understanding, based on the first‐principles calculations, of structural and electronic properties, defects, ionic diffusion, and shift current for CH₃NH₃PbI₃ perovskite, and the effect of ionic transport on the hysteresis of current–voltage curves in PSCs. The shift current connected to the possible presence of ferroelectricity is also discussed. The current state‐of‐the‐art and some open questions regarding PSCs are also highlighted, and the benefits, challenges, and potentials of perovskite for use in PSCs are stressed.     

Enhancement of the Photovoltaic Performance of CH3NH3PbI3 Perovskite Solar Cells through a Dichlorobenzene‐Functionalized Hole‐Transporting Material

A dichlorobenzene‐functionalized hole‐transporting material (HTM) is developed for a CH₃NH₃PbI₃‐based perovskite solar cell. Notwithstanding the similarity of the frontier molecular orbital energy levels, optical properties, and hole mobility between the functionalized HTM [a polymer composed of 2′‐butyloctyl‐4,6‐dibromo‐3‐fluorothieno[3,4‐b]thiophene‐2‐carboxylate (TT‐BO), 3′,4′‐dichlorobenzyl‐4,6‐dibromo‐3‐fluorothieno[3,4‐b]thiophene‐2‐carboxylate (TT‐DCB), and 2,6‐bis(trimethyltin)‐4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene (BDT‐EH), denoted PTB‐DCB21] and the nonfunctionalized polymer [a polymer composed of thieno[3,4‐b]thiophene (TT) and benzo[1,2‐b:4,5‐b′]dithiophene (BDT), denoted PTB‐BO], a higher power conversion efficiency for PTB‐DCB21 (8.7 %) than that for PTB‐BO (7.4 %) is achieved because of a higher photocurrent and voltage. The high efficiency is even obtained without including additives, such as lithium bis(trifluoromethanesulfonyl)imide and/or 4‐tert‐butylpyridine, that are commonly used to improve the conductivity of the HTM. Transient photocurrent–voltage studies show that the PTB‐DCB21‐based device exhibits faster electron transport and slower charge recombination; this might be related to better interfacial contact through intermolecular chemical interactions between the perovskite and the 3,4‐dichlorobenzyl group in PTB‐DCB21.     

In CH3NH3PbI3 Perovskite Film,the Surface Termination Layer Dominates the Moisture Degradation Pathway

Theoretical studies have shown that surface terminations, such as MAI or PbI layers, greatly affect the environmental stability of organic–inorganic perovskite. However, until now, there has been little effort to experimentally detect the existence of MAI or PbI terminations on MAPbI₃ grains, let alone disclose their effects on the humidity degradation pathway of perovskite solar cell. Here, we successfully modified and detected the surface terminations of MAI and PbI species on polycrystalline MAPbI₃ films. MAI-terminated perovskite film followed the moisture degradation process from MAPbI₃ to hydrate MAPbI₃⋅H₂O and then into PbI₂, with penetration of water molecules being the main driving force leading to the degradation of MAPbI₃ layer by layer. In contrast, for the PbI-terminated perovskite film in a humid atmosphere, a deprotonation degradation pathway was confirmed, in which the film preferentially degraded directly from MAPbI₃ into PbI₂, here the iodine defects played a key role in promoting the dissociation of water molecules into OH⁻ and further catalyzing the decomposition of perovskite.     

Pseudohalide‐Induced Moisture Tolerance in Perovskite CH3NH3Pb(SCN)2I Thin Films

Two pseudohalide thiocyanate ions (SCN^?) have been used to replace two iodides in CH₃NH₃PbI₃, and the resulting perovskite material was used as the active material in solar cells. In accelerated stability tests, the CH₃NH₃Pb(SCN)₂I perovskite films were shown to be superior to the conventional CH₃NH₃PbI₃ films as no significant degradation was observed after the film had been exposed to air with a relative humidity of 95 % for over four hours, whereas CH₃NH₃PbI₃ films degraded in less than 1.5 hours. Solar cells based on CH₃NH₃Pb(SCN)₂I thin films exhibited an efficiency of 8.3 %, which is comparable to that of CH₃NH₃PbI₃ based cells fabricated in the same way.     

Ultrafast Photogenerated Hole Extraction/Transport Behavior in a CH3NH3PbI3/Carbon Nanocomposite and Its Application in a Metal‐Electrode‐Free Solar Cell

Aligned and flexible electrospun carbon nanomaterials are used to synthesize carbon/perovskite nanocomposites. The free‐electron diffusion length in the CH₃NH₃PbI₃ phase of the CH₃NH₃PbI₃/carbon nanocomposite is almost twice that of bare CH₃NH₃PbI₃, and nearly 95 % of the photogenerated free holes can be injected from the CH₃NH₃PbI₃ phase into the carbon nanomaterial. The exciton binding energy of the composite is estimated to be 23 meV by utilizing temperature‐dependent optical absorption spectroscopy. The calculated free carriers increase with increasing total photoexcitation density, and this broadens the potential of this material for a broad range of optoelectronics applications. A metal‐electrode‐free perovskite solar cell (power conversion efficiency: 13.0 %) is fabricated with this perovskite/carbon composite, which shows great potential for the fabrication of efficient, large‐scale, low‐cost, and metal‐electrode‐free perovskite solar cells.     

Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells

A planar perovskite solar cell that incorporates a nanocarbon hole‐extraction layer is demonstrated for the first time by an inkjet printing technique with a precisely controlled pattern and interface. By designing the carbon plus CH₃NH₃I ink to transform PbI₂ in situ to CH₃NH₃PbI₃, an interpenetrating seamless interface between the CH₃NH₃PbI₃ active layer and the carbon hole‐extraction electrode was instantly constructed, with a markedly reduced charge recombination compared to that with the carbon ink alone. As a result, a considerably higher power conversion efficiency up to 11.60 % was delivered by the corresponding solar cell. This method provides a major step towards the fabrication of low‐cost, large‐scale, metal‐electrode‐free but still highly efficient perovskite solar cells.     

Engineering of CH3NH3PbI3 Perovskite Crystals by Alloying Large Organic Cations for Enhanced Thermal Stability and Transport Properties

The number of studies on organic–inorganic hybrid perovskites has soared in recent years. However, the majority of hybrid perovskites under investigation are based on a limited number of organic cations of suitable sizes, such as methylammonium and formamidinium. These small cations easily fit into the perovskite's three‐dimensional (3D) lead halide framework to produce semiconductors with excellent charge transport properties. Until now, larger cations, such as ethylammonium, have been found to form 2D crystals with lead halide. Here we show for the first time that ethylammonium can in fact be incorporated coordinately with methylammonium in the lattice of a 3D perovskite thanks to a balance of opposite lattice distortion strains. This inclusion results in higher crystal symmetry, improved material stability, and markedly enhanced charge carrier lifetime. This crystal engineering strategy of balancing opposite lattice distortion effects vastly increases the number of potential choices of organic cations for 3D perovskites, opening up new degrees of freedom to tailor their optoelectronic and environmental properties.     

Thin‐Film Transformation of NH4PbI3 to CH3NH3PbI3 Perovskite: A Methylamine‐Induced Conversion–Healing Process

Methylamine‐induced thin‐film transformation at room‐temperature is discovered, where a porous, rough, polycrystalline NH₄PbI₃ non‐perovskite thin film converts stepwise into a dense, ultrasmooth, textured CH₃NH₃PbI₃ perovskite thin film. Owing to the beneficial phase/structural development of the thin film, its photovoltaic properties undergo dramatic enhancement during this NH₄PbI₃‐to‐CH₃NH₃PbI₃ transformation process. The chemical origins of this transformation are studied at various length scales.     

Influence of Orientational Disorder on the Optical Absorption Properties of the Hybrid Metal-Halide Perovskite CH3NH3PbI3

An experimental and theoretical investigation is reported to analyze the relation between the structural and absorption properties of CH₃NH₃PbI₃ in the tetragonal phase. More than 3000 geometry optimizations were performed to reveal the structural disorder and identify structures with the lowest energies. The electronic structure calculations provide an averaged band gap of 1.674 eV, which is in excellent agreement with the experimental value of about 1.6 eV. The simulations of the absorption spectrum for three representative structures with lowest energy reproduced the absorption shoulders observed in the experimental spectra. These shoulders are assigned to excitations having similar orbital characters and involving transitions between hybridized 6s(Pb)/5p(I) orbitals and 6p(Pb) orbitals. The geometries of the three structures were analyzed and the effects of the inorganic frame and the CH₃NH₃⁺ cations on the absorption properties were estimated. It was found that both changes in the inorganic frame and the CH₃NH₃⁺ cations orientations impact the absorption spectra, by modifying the transitions energies and intensities. This highlights the role of CH₃NH₃⁺ cation in influencing the absorption properties of CH₃NH₃PbI₃ and demonstrates that CH₃NH₃⁺ cation is one of the key elements explaining the broad and nearly constant absorption spectrum in the visible range.     

Methylamine‐Gas‐Induced Defect‐Healing Behavior of CH3NH3PbI3 Thin Films for Perovskite Solar Cells

We report herein the discovery of methylamine (CH₃NH₂) induced defect‐healing (MIDH) of CH₃NH₃PbI₃ perovskite thin films based on their ultrafast (seconds), reversible chemical reaction with CH₃NH₂ gas at room temperature. The key to this healing behavior is the formation and spreading of an intermediate CH₃NH₃PbI₃?xCH₃NH₂ liquid phase during this unusual perovskite–gas interaction. We demonstrate the versatility and scalability of the MIDH process, and show dramatic enhancement in the performance of perovskite solar cells (PSCs) with MIDH. This study represents a new direction in the formation of defect‐free films of hybrid perovskites.     

白光及紫外光辐照下甲氨碘化铅基钙钛矿太阳能电池降解机制差异

本工作实验对比了可见光以及紫外光辐照下甲氨碘化铅(CH3NH3PbI3即MAPbI3)基钙钛矿太阳能电池器件性能及微结构演变特征差异.结果表明可见光辐照下钙钛矿太阳能电池器件中MAPbI3层发生降解的同时,伴随着Au元素从金属电极一侧向MAPbI3和电子传输层SnO2的界面处迁移现象.但相较于紫外光,可见光辐照下器件中...     

压强对钙钛矿薄膜形貌和结晶性影响的研究

采用新型简便的方法控制钙钛矿层薄膜的结晶过程,对优化制备工艺、获得高性能器件至关重要。本文采用调节真空度的方法有效控制钙钛矿层结晶,系统地研究了压强的作用及其对晶体生长、薄膜形成及器件性能的影响。采用扫描电子显微镜(SEM)、紫外-可见吸收光谱、X射线衍射光谱(XRD)谱图等手段对钙钛矿层的形貌及结晶程度进行了分析表征。在此基础上,制备出器件结构为Glass/ITO/PEDOT:PSS/CH3NH3PbI3/PCBM/Al的钙钛矿太阳能电池,考察了不同压强下的器件性能。结果表明:随压强降低,钙钛矿层结晶程度明显提高,孔洞减少,表面覆盖率提高。同时,器件的短路电流、填充因子以及光电转化效率均随压强降低而提高,器件效率由原来的10.38%提高到12.36%,提高了19%。     

钙钛矿CH3NH3PbI3晶体的电化学

电化学方波伏安及循环伏安测量表明,钙钛矿CH₃NH₃PbI₃晶体在有机电解质中的氧化还原过程伴随着化学降解。该化学降解源于CH₃NH₃PbI₃晶体中铅离子的还原以及碘离子的氧化。通过电化学伏安法可以测定晶体的能带。     

Similar Structural Dynamics for the Degradation of CH3NH3PbI3 in Air and in Vacuum

We investigate the degradation path of MAPbI₃ (MA=methylammonium) films over flat TiO₂ substrates at room temperature by means of X‐ray diffraction, spectroscopic ellipsometry, X‐ray photoelectron spectroscopy, and high‐resolution transmission electron microscopy. The degradation dynamics is found to be similar in air and under vacuum conditions, which leads to the conclusion that the occurrence of intrinsic thermodynamic mechanisms is not necessarily linked to humidity. The process has an early stage, which drives the starting tetragonal lattice in the direction of a cubic atomic arrangement. This early stage is followed by a phase change towards PbI₂. We describe how this degradation product is structurally coupled with the original MAPbI₃ lattice through the orientation of its constituent PbI₆ octahedra. Our results suggest a slight octahedral rearrangement after volatilization of HI+CH₃NH₂ or MAI, with a relatively low energy cost. Our experiments also clarify why reducing the interfaces and internal defects in the perovskite lattice enhances the stability of the material.     

Mixed‐Halide CH3NH3PbI3−xXx (X=Cl,Br, I) Perovskites: Vapor‐Assisted Solution Deposition and Application as Solar Cell Absorbers

There have been recent reports on the formation of single‐halide perovskites, CH₃NH₃PbX₃ (X=Cl, Br, I), by means of vapor‐assisted solution processing. Herein, the successful formation of mixed‐halide perovskites (CH₃NH₃PbI_3?xX_x) by means of a vapor‐assisted solution method at ambient atmosphere is reported. The perovskite films are synthesized by exposing PbI₂ film to CH₃NH₃X (X=I, Br, or Cl) vapor. The prepared perovskite films have uniform surfaces with good coverage, as confirmed by SEM images. The inclusion of chlorine and bromine into the structure leads to a lower temperature and shorter reaction time for optimum perovskite film formation. In the case of CH₃NH₃PbI_3?xCl_x, the optimum reaction temperature is reduced to 100 °C, and the resulting phases are CH₃NH₃PbI₃ (with trace Cl) and CH₃NH₃PbCl₃ with a ratio of about 2:1. In the case of CH₃NH₃PbI_3?xBr_x, single‐phase CH₃NH₃PbI₂Br is formed in a considerably shorter reaction time than that of CH₃NH₃PbI₃. The mesostructured perovskite solar cells based on CH₃NH₃PbI₃ films show the best optimal power conversion efficiency of 13.5 %, whereas for CH₃NH₃PbI_3?xCl_x and CH₃NH₃PbI_3?xBr_x the best recorded efficiencies are 11.6 and 10.5 %, respectively.     

SnO2双层电子传输层对钙钛矿太阳能电池界面电荷传输的影响

为了改善基于SnO₂电子传输层的钙钛矿太阳能电池的界面电荷传输特性和迟滞现象,我们采用低温溶液处理工艺制备了4种不同类型的SnO₂电子传输层用于钙钛矿太阳能电池,包括由SnCl₄·5H₂O溶胶-凝胶层(Cl₄-SnO₂)、SnCl₂·2H₂O溶胶-凝胶层(Cl₂-SnO₂)和SnO₂纳米颗粒层(NP-SnO₂)与SnO₂胶体层(Col-SnO₂)两两相互作用形成的同质结SnO₂双层电子传输层和Col-SnO₂单层电子传输层;并系统研究了不同SnO₂双层电子传输层对器件光电性能和迟滞现象的影响。通过扫描电镜(SEM)、X射线衍射(XRD)、稳态光致发光(PL)、电化学阻抗(EIS)和稳定性测试等表征证实,在Col-SnO...     

Stable and Low‐Cost Mesoscopic CH3NH3PbI2Br Perovskite Solar Cells by using a Thin Poly(3‐hexylthiophene) Layer as a Hole Transporter

Mesoscopic perovskite solar cells using stable CH₃NH₃PbI₂Br as a light absorber and low‐cost poly(3‐hexylthiophene) (P3HT) as hole‐transporting layer were fabricated, and a power conversion efficiency of 6.64 % was achieved. The partial substitution of iodine with bromine in the perovskite led to remarkably prolonged charge carrier lifetime. Meanwhile, the replacement of conventional thick spiro‐MeOTAD layer with a thin P3HT layer has significantly reduced the fabrication cost. The solar cells retained their photovoltaic performance well when they were exposed to air without any encapsulation, presenting a favorable stability. The combination of CH₃NH₃PbI₂Br and P3HT may render a practical and cost‐effective solid‐state photovoltaic system. The superior stability of CH₃NH₃PbI₂Br is also promising for other photoconversion applications.     

紫外光辐照下CH3NH3PbI3基钙钛矿太阳能电池失效机制

随着光伏产业的不断发展,有机无机杂化钙钛矿太阳能电池的研发成为科学与工业界广泛关注的焦点。到目前为止,其光电转换效率已经提高到了25.2%,成为替代硅基太阳能电池的核心方案之一。然而,钙钛矿太阳能电池的稳定性较差,容易受到环境中氧气、水分、温度甚至光照的影响,这严重制约了其大规模推广与应用。大量科学研究表明,如何避免紫外辐照下有机无机杂化钙钛矿太阳能电池的性能衰减,对于提高钙钛矿太阳能电池的光照稳定性至关重要。然而到目前为止,仍然没有系统的工作来对紫外辐照下钙钛矿太阳能电池性能以及微结构演化过程进行详细的表征与分析。本文中,我们利用聚焦离子束-扫描电子显微分析(FIB-SEM)以及球差校正透射电子显微分析(TEM)等技术,全面地研究了紫外辐照过程中有机无机杂化钙钛矿太阳能电池性能变化规律以及电池微结构演化特征。实验结果表明,紫外辐照过程中太阳能电池内部会形成0.5–0.6 V的内建电场,钙钛矿中的I^-离子在电场的驱动下向金属Au电极和空穴传输层2, 2’, 7, 7’-四[N, N-二(4-甲氧基苯基)氨基]-9, 9'-螺二芴(Spiro-OMeTAD)一侧迁移;随后,空穴传输层与金电极的界面处,碘离子与光生空穴一起与金电极发生反应,将金属态Au氧化成离子态Au⁺。而Au⁺离子则在内建电场的驱动下反向迁移穿过钙钛矿MAPbI₃层,直接被SnO₂和MAPbI₃界面处的电子还原形成金属Au纳米团簇。除此之外,紫外辐照过程中钙钛矿太阳能电池性能降低的同时,往往伴随着Spiro-OMeTAD与钙钛矿界面处物质迁移、钙钛矿薄膜内晶界展宽以及Au纳米颗粒周围MAPbI₃物相分解等现象。以上各种因素的协同作用,共同导致了紫外光照下有机无机杂化钙钛矿太阳能电池光电转换性能(PCE)、开路电压(V_oc)以及短路电流(J_sc)等性能参数的急剧下降。     

A Self-Formed Stable PbI2/NiOx Interface with Increased Ni3+ Centers for Perovskite Photovoltaics

Nickel oxide (NiO_x) is a promising hole transport material (HTM) for perovskite photovoltaics owing to its chemical stability and low cost. However, most NiO_x based solar cells deliver relatively weak performance because of its insufficient electrical property and interfacial contact. In this work, a self-formed PbI₂/NiO_x interface was developed to stabilize the Ni³⁺ centers, which was beneficial for electrical transport and band alignment in perovskite solar cells. Combined with ultraviolet ozone treatment ( UVO ) and sequential deposition, the density of Ni³⁺ centers was greatly increased and could be stabilized by the PbI₂ interface. These merits contributed coordinately to the fast hole extraction and low energy loss across the PbI₂/NiO_x interface, yielding power conversion efficiencies (PCEs) of over 19 %.