Monodisperse sub-10 nm gold nanoparticles by reversing the order of addition in Turkevich method--the role of chloroauric acid

The Turkevich method for synthesizing gold nanoparticles, using sodium citrate as the reducing agent, is renowned for its ability to produce biocompatible colloids with mean size >10 nm. Here we show that monodisperse gold nanoparticles in the 5-10 nm size range can be synthesized by simply reversing the order of addition of reactants, i.e. adding chloroauric acid to citrate solution. Kinetic studies and electron microscopic characterization revealed that the reactivity of chloroauric acid, initial molar ratio of citrate to chloroauric acid (MR), and reaction mixture pH play an important role in producing monodisperse gold nanoparticles. Reversing the order of addition also enhanced the stabilization of nanoparticles at high MR values. Remarkably, the system exhibits a 'memory' of the order of addition, even when the timescale of mixing is much shorter than the timescale of synthesis.     

Comparative study of amphiphilic hyperbranched and linear polymer stabilized organo‐soluble gold nanoparticles as efficient recyclable catalysts in the biphasic reduction of 4‐nitrophenol

A series of organo‐soluble spherical gold nanoparticles (AuNPs) were prepared through the reduction of HAuCl₄ by NaBH₄ in the presence of amphiphilic hyperbranched polymers that had a hydrophilic hyperbranched polyethylenimine core and a hydrophobic shell formed by many palmitamide (C16) chains. For comparison, the corresponding linear polymeric analog derived from linear polyethylenimine was also used to prepare the organo‐soluble AuNPs. The obtained AuNPs were characterized by transmission electron microscopy. It was found that higher feed ratio of polymer to HAuCl₄ and utilization of polymers with higher C16 density usually resulted in smaller AuNPs with relatively lower polydispersity. Except of the polymer having the pronounced low molecular weight, the molecular weight and the morphology of the amphiphilic polymers had almost no obvious effect on the size of the formed AuNPs. These organo‐soluble AuNPs could be used as efficient catalysts for the biphasic catalytic reduction of 4‐nitrophenol by NaBH₄. Their apparent rate coefficients had correlation with the molecular weight of the used amphiphilic polymers, but were less relevant to the morphology of these polymers. These organo‐soluble AuNPs could be conveniently recovered and reused many times. The morphology of the capping polymers had obvious effect on the lifetime of the AuNPs catalysts in the catalytic reduction of 4‐nitrophenol. Except of the pronounced low molecular weight hyperbranched polymer, the other hyperbranched ones with relatively high molecular weight rendered the AuNPs to have bigger turnover number values than their linear analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Solvent effect on the synthesis of monodisperse amine-capped Au nanoparticles

A remarkable solvent effect in a single-phase synthesis of monodisperse amine-capped Au nanoparticles is demonstrated.Oleylamine-capped Au nanoparticles were prepared via the reduction of HAuCU by an amine-borane complex in the presence of oleylamine in an organic solvent.When linear or planar hydrocarbon(e.g.,n-hexane,n-octane,1-octadecylene,benzene,and toluene) was used as the solvent, high-quality monodisperse Au nanoparticles with tunable sizes were obtained.However,Au nanoparticles with poor size dispersity were obtained when tetralin,chloroform or cyclohexane was used as the solvent.The revealed solvent effect allows the controlled synthesis of monodisperse Au nanoparticles with tunable size of 3-10 nm.     

Synthesis,Chemical–Physical Characterization,and Biomedical Applications of Functional Gold Nanoparticles: A Review

Relevant properties of gold nanoparticles, such as stability and biocompatibility, together with their peculiar optical and electronic behavior, make them excellent candidates for medical and biological applications. This review describes the different approaches to the synthesis, surface modification, and characterization of gold nanoparticles (AuNPs) related to increasing their stability and available features useful for employment as drug delivery systems or in hyperthermia and photothermal therapy. The synthetic methods reported span from the well-known Turkevich synthesis, reduction with NaBH₄ with or without citrate, seeding growth, ascorbic acid-based, green synthesis, and Brust–Schiffrin methods. Furthermore, the nanosized functionalization of the AuNP surface brought about the formation of self-assembled monolayers through the employment of polymer coatings as capping agents covalently bonded to the nanoparticles. The most common chemical–physical characterization techniques to determine the size, shape and surface coverage of AuNPs are described underlining the structure–activity correlation in the frame of their applications in the biomedical and biotechnology sectors.     

Gold Nanoparticles Carrying Diatomic Molecules (O2 and CO) in Aqueous Solution

Gold nanoparticles (AuNPs) prepared by citrate reduction of aurochloric acid (HAuCl₄) were functionalized by tris(4‐sulfonatophenyl)porphinatoiron(III) (Fe^IIIP2) and poly(ethylene glycol) with thiolated arms (PEG‐SH). Fe^IIIP2 on the AuNP surface existed as its μ‐oxo dimer, which was reduced by Na₂S₂O₄ to yield monomeric Fe^IIP2. Fe^IIP2‐bearing AuNPs were further functionalized through inclusion of two sulfonatophenyl groups of Fe^IIP2 by a per‐O‐methylated β‐cyclodextrin dimer with a pyridine linker (Py3CD) to obtain AuNPs capable of carrying diatomic molecules in the body. The resulting AuNPs (hemoCD‐AuNPs) bound O₂ as well as CO in an aqueous solution. Although a noncolloidal 1:1 complex of 5,10,15,20‐tetrakis(4‐sulfonatophenyl)porphinatoiron(II) and Py3CD injected into the femoral vein of a rat was rapidly excreted in the urine, no excretion was observed with ferric hemoCD‐AuNPs, which were gradually accumulated in the spleen and liver of a rat. These results suggest that hemoCD‐AuNPs can be used as a carrier of diatomic molecules such as O₂ and CO in vivo.     

One‐Step Synthesis of Collagen Hybrid Gold Nanoparticles and Formation on Egyptian‐like Gold‐Plated Archaeological Ivory

A one‐step method is reported to synthesize hybrid gold nanoparticles (AuNPs) by reduction of HAuCl₄ in acetic solution in the presence of collagen (Col), dicarboxylic acid‐terminated polyethylene glycol (PEG), and cetyltetrammonium bromide (CTAB) mixed with hydoxyapatite (HAP) as surfactants. Such formation process of AuNPs was shown to be responsible for purple stains naturally formed on Egyptianizing archaeological gilded ivories from 8th BC Syria. The understanding of this formation mechanism, which most likely involves a step with hybrid AuNPs, allows the establishing of an authenticity marker of ancient gold‐plated ivories.     

Synthesis of gold nanoparticle necklaces using linear-dendritic copolymers

Linear-dendritic copolymers containing hyperbranched poly(citric acid) and linear poly(ethylene glycol) blocks (PCA-PEG-PCA) were used as reducing and capping agents to synthesize and support gold nanoparticles (AuNPs). PCA-PEG-PCA copolymers with 1758, 1889 and 3446 molecular weights, called A1, A2 and A3 through this work, respectively, were synthesized using 2, 5, and 10 citric acid/PEG molar ratios. The diameter of A1, A2 and A3 in a fresh water solution was investigated using dynamic light scattering (DLS) and it was between 1.8 and 2.8 nm. AuNPs were simply synthesized and supported by addition a boiling aqueous solution of HAuCl₄ to aqueous solutions of A1, A2 and A3. Supported AuNPs were stable in water for several months and agglomeration was not occurred. The loading capacity of A1, A2 and A3 and the size of synthesized AuNPs were investigated using UV spectroscopy and transmission electron microscopy (TEM). It was found that the loading capacity of PCA-PEG-PCA copolymers depend on the concentration of copolymers and the size of their poly(citric acid) parts directly. For example average loading capacities for 400 μM concentration of A1, A2 and A3 were 32.24, 37.4 and 41.52 μM, respectively, and average loading capacities for 400, 200 and 100 μM concentration of A1 were 32.24, 20.28 and 9.1 μM, respectively. Interestingly there was a reverse relation between the size of synthesized AuNPs and size of poly(citric acid) parts of PCA-PEG-PCA copolymers.     

Functional core/shell nanoparticles via layer-by-layer assembly. investigation of the experimental parameters for controlling particle aggregation and for enhancing dispersion stability

Gold nanoparticles (AuNPs) with a size of 13.5 nm were synthesized using well-established methods as described earlier by Turkevich (Turkevich, J.; Stevenson, P. C.; Hillier, J. Discuss. Faraday Soc. 1961, 11, 55-75) and Frens (Frens, G. Nature (London), Phys. Sci. 1973, 241, 20-22) using citrate as the reducing agent. It has already been reported that such AuNPs can easily be coated with polymeric shells using electrostatic layer-by-layer assembly of certain polyelectrolytes. Here, we show which parameters, namely, the polyelectrolyte concentration, the contour length of the polyelectrolyte chain, and the ionic strength, are preventing bridging flocculation during polyelectrolyte adsorption and enhancing the stability of the colloidal dispersion. For the preparation of individually coated particles with high yield, we identified optimal conditions such as the degree of polymerization of the polyelectrolytes used, the polyelectrolyte concentration, the nanoparticle concentration, and the concentration of added NaCl during multilayer buildup. Surprisingly, such functional nanoparticles are obtained with highest yield at a moderate excess of polyions. In contrast to expectations, a larger excess of polyions leads again to slight destabilization of the dispersion. The present findings raise our confidence to establish layer-by-layer deposition as a general method for functionalizing even different nanoparticles using a single method.     

Preparation and nonlinear optical properties of Au nanoparticles doped TiO2 thin films

Nano-sized noble metal nanoparticles doped dielectric composite films with large third-order nonlinear susceptibility due to the confinement and the enhancement of local field were considered to be applied for optical information processing devices, such as optical switch or all optical logical gates. In this paper, sol–gel titania thin films doped with gold nanoparticles (AuNPs, ~10 nm in average size) were prepared. AuNPs were firstly synthesized from HAuCl₄ in aqueous solution at ~60 °C, using trisodium citrate as the reducing agent, polyvinylpyrrolidone as the stable agent; then the particle size and optical absorption spectra of the AuNPs in aqueous solutions were characterized by transmitting electron microscopy and UV–Vis–NIR spectrometry. Sol–gel 2AuNPs–100TiO₂ (in %mol) thin films (5 layers, ~1 μm in thickness) were deposited on silica glass slides by multilayer dip-coating. After heat-treated at 300–1,000 °C in air, the AuNPs–TiO₂ thin films were investigated by X-ray diffraction, scanning electron microscopy and atomic force microscopy. The nonlinear optical properties of the AuNPs–TiO₂ thin films were measured with the Z-scan technique, using a femtosecond laser (200 fs) at the wavelength of 800 nm. The third-order nonlinear refractive index and nonlinear absorption coefficient of 2AuNPs–100TiO₂ films were at the order of 10^?12 cm²/W, and the order of 10^?6 cm/W, respectively, and the third-order optical nonlinear susceptibility χ⁽³⁾ was ~6.88 × 10^?10 esu.     

Electrochemical Behavior of Gold Nanoparticles Generated In Situ on 3‐(1‐Imidazolyl)propyl‐silsesquioxane

Gold nanoparticles of different morphologies have been synthesized on a silica‐based organic‐inorganic hybrid material for catalytic applications. The gold nanoparticles formations proceed through in situ chemical reduction of the AuCl₄^? anions previously adsorbed on 3‐(1‐imidazolyl)propyl‐silsesquioxane, which plays the role of substrate and stabilizer. Two distinct reducing agents, sodium citrate and sodium borohydride, were employed to generate gold nanoparticles of different sizes. UV‐vis diffuse reflectance as well as transmission electron microscopy were employed to evaluate the particle’s morphology. Modified carbon paste electrodes were prepared from these materials and their electrochemical behavior investigated using potassium ferrocyanide and 4‐nitrophenol as redox model compounds. Both AuNPs‐modified electrodes decreased the overpotential of 4‐nitrophenol reduction by around 90 mV compared to the unmodified electrode as evidenced by cyclic voltammetry experiment. However, the smaller diameter particles (borohydride‐reduced) produced more significant catalytic effect as a consequence of their large surface area. Regarding the sensing parameters, the sensitivity is higher for the borohydride‐reduced AuNPs while the values of limit of detection are of the same order of magnitude. Thus, the detection limit and sensitivity are 70.0±0.6 nM and 187 µA/mM for the citrate‐reduced AuNPs; and 75.0±2.2 nM and 238 µA/mM for the borohydride‐reduced AuNPs.     

Piece by Piece—Electrochemical Synthesis of Individual Nanoparticles and their Performance in ORR Electrocatalysis

The impact of individual HAuCl₄ nanoreactors is measured electrochemically, which provides operando insights and precise control over the modification of electrodes with functional nanoparticles of well‐defined size. Uniformly sized micelles are loaded with a dissolved metal salt. These solution‐phase precursor entities are then reduced electrochemically—one by one—to form nanoparticles (NPs). The charge transferred during the reduction of each micelle is measured individually and allows operando sizing of each of the formed nanoparticles. Thus, particles of known number and sizes can be deposited homogenously even on nonplanar electrodes. This is demonstrated for the decoration of cylindrical carbon fibre electrodes with 25±7 nm sized Au particles from HAuCl₄‐filled micelles. These Au NP‐decorated electrodes show great catalyst performance for ORR (oxygen reduction reaction) already at low catalyst loadings. Hence, collisions of individual precursor‐filled nanocontainers are presented as a new route to nanoparticle‐modified electrodes with high catalyst utilization.     

Green synthesis and chemical characterization of gold nanoparticle synthesized using Camellia sinensis leaf aqueous extract for the treatment of acute myeloid leukemia in comparison to daunorubicin in a leukemic mouse model

According to chemotherapeutic properties of medicinal plants, pharmacologists have always tried to synthesize and formulate the new chemotherapeutic supplements or drugs of metallic nanoparticles using plants. In this study, Camellia sinensis leaf aqueous extract-based gold nanoparticles (AuNPs) are reported for the first time to exert a dietary therapeutic potential compared to Daunorubicin in an animal model of acute myeloid leukemia. The synthesized AuNPs were characterized using different techniques including UV-Vis., FT-IR spectroscopy, TEM, EDS, FE-SEM, and XRD. DPPH free radical scavenging test was done to evaluate the antioxidant potentials of HAuCl₄, C. sinensis, AuNPs, and daunorubicin. For the analyzing of cytotoxicity effects of HAuCl₄, C. sinensis, AuNPs, and daunorubicin, MTT assay was used on HUVEC, Human HL-60/vcr, 32D-FLT3-ITD, and Murine C1498 cell lines. In vivo design, induction of acute myeloid leukemia was done by 7,12-Dimethylbenz[a]anthracene (DMBA) in 75 mice. Then, the animals were randomly divided into six subgroups, including control, untreated, HAuCl₄, C. sinensis, AuNPs, and daunorubicin. FTIR findings suggested antioxidant compounds in the nanoparticles were the sources of reducing power, reducing gold ions to AuNPs. SEM and TEM images exhibited a uniform spherical morphology and diameters of ~20-30 nm for the nanoparticles. DPPH test revealed similar antioxidant potentials for daunorubicin and AuNPs. These nanoparticles similar to daunorubicin had low cell viability dose-dependently against Human HL-60/vcr, 32D-FLT3-ITD, and Murine C1498 cell lines without any cytotoxicity on HUVEC cell line. AuNPs similar to daunorubicin, significantly (p≤0.05) increased the anti-inflammatory cytokines and the lymphocyte, platelet, and RBC parameters and decreased the weight and volume of liver and spleen, the pro-inflammatory cytokines, and the total WBC, blast, neutrophil, monocyte, eosinophil, and basophil counts, as compared to the untreated mice. According to the above results, it appears that AuNPs can be used as a chemotherapeutic drug for the treatment of acute myeloid leukemia in the clinical trial.     

Size control of gold nanocrystals in citrate reduction: the third role of citrate

Growth kinetics and temporal size/shape evolution of gold nanocrystals by citrate reduction in boiling water were studied systematically and quantitatively. Results reveal that the size variation and overall reaction mechanism were mostly determined by the solution pH that was in turn controlled by the concentration of sodium citrate (Na3Ct) in the traditional Frens's synthesis. This conclusion was further confirmed by the reactions with variable pH but fixed concentrations of the two reactants, HAuCl4 and Na3Ct. Two substantially different reaction pathways were identified, with the switching point at pH = 6.2-6.5. The first pathway is for the low pH range and consists of three overlapping steps: nucleation, random attachment to polycrystalline nanowires, and smoothing of the nanowires via intra-particle ripening to dots. The second pathway that occurred above the pH switching point is consistent with the commonly known nucleation-growth route. Using the second pathway, we demonstrated a new synthetic route for the synthesis of nearly monodisperse gold nanocrystals in the size range from 20 to 40 nm by simply varying the solution pH with fixed concentrations of HAuCl4 and Na3Ct. The switching of the reaction pathways is likely due to the integration nature of water as a reaction medium. In the citrate reduction, the solution pH was varied by changing the initial HAuCl4/Na3Ct ratio. Consequently, when pH was higher than about 6.2, the very reactive [AuCl3(OH)]- would be converted to less reactive [AuCl2(OH)2]- and [AuCl(OH)3]-.     

Preparation of gold nanoparticles on eggshell membrane and their biosensing application

A facile green biosynthesis method has been successfully developed to prepare gold nanoparticles (AuNPs) of various core sizes (25 ± 7 nm) using a natural biomaterial, eggshell membrane (ESM) at ambient conditions. In situ synthesis of AuNPs-immobilized ESM is conducted in a simple manner by immersing ESM in a pH 6.0 aqueous solution of HAuCl₄ without adding any reductant. The formation of AuNPs on ESM protein fibers is attributed to the reduction of Au(III) ions to Au(0) by the aldehyde moieties of the natural ESM fibers. Energy dispersive X-ray spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray powder diffraction unambiguously identify the presence of AuNPs on ESM. The effect of pH on the in situ synthesis of AuNPs on ESM has been investigated in detail. The pH of the gold precursor (HAuCl₄) solution can influence the formation rate, dispersion and size of AuNPs on ESM. At pH ≤3.0 and ≥7.0, no AuNPs are observed on ESM while small AuNPs are homogeneously dispersed on ESM at pH 4.0-6.0. The optimal pH for AuNPs formation on ESM is 6.0. AuNPs/ESMs are used to immobilize glucose oxidase (GO_x) for glucose biosensing. AuNPs on ESM can increase the enzyme activity of GO_x. The linear response range of the glucose biosensor is 20 μM to 0.80 mM glucose with a detection limit of 17 μM (S/N = 3). The biosensor has been successfully applied to determine the glucose content in commercial glucose injections. Our work provides a very simple, non-toxic, convenient, and green route to synthesize AuNPs on ESM which is potentially useful in the biosensing field.     

Synthesis and investigation of dual pH‐ and temperature‐responsive behaviour of poly[2‐(dimethylamino)ethyl methacrylate]‐grafted gold nanoparticles

Gold nanoparticles (AuNPs) were synthesized by reduction of chloroauric acid (HAuCl₄) aqueous solution with hydrazine monohydrate. The AuNPs were immediately treated with cysteamine to obtain amine‐functionalized nanoparticles (Au‐NH₂). The reaction of Au‐NH₂ with epichlorohydrin and subsequent treatment with sodium hydroxide gave epoxidized AuNPs (Au‐EP). Then, thiol‐capped AuNPs (Au‐SH) were synthesized by reaction of Au‐EP with cysteamine. A ‘grafting to’ approach was utilized to graft bromine‐terminated poly(N ,N ′‐dimethylaminoethyl methacrylate), synthesized via aqueous atom transfer radical polymerization, with various molecular weights (6280, 25 800, 64 200 and 87 600 g mol⁻¹) onto Au‐SH to obtain Au‐P1, Au‐P2, Au‐P3 and Au‐P4 samples, respectively. All samples were exposed to temperature and pH variations, and Z‐average diameter was monitored using dynamic light scattering. According to the results, polymer‐grafted nanoparticles collapsed at lower temperatures with increasing solution pH for all molecular weight ranges due to deprotonation of tertiary amine groups. However, higher molecular weight polymers were more sensitive to pH variation especially in alkaline media. Also, a high degree of agglomeration was observed for Au‐P4 nanoparticles in alkaline media on increasing the temperature to 55 and 65 °C.     

Synthesis of Core-Shell (Pd-Au) Bimetallic Nanoparticles in Microemulsions

Palladium-gold core-shell nanoparticles were synthesized in the aqueous domains of water in oil microemulsions by the sequential reduction of H₂PdCl₄ and HAuCl₄. The nanoparticles were characterized by ultraviolet-visible (UV-vis) spectroscopy and transmission electron microscopy (TEM). The UV-vis spectra confirm the presence of palladium nanoparticles after reducing H₂PdCl₄. These particles have been used as seeds for the core-shell particles. UV-vis spectra show that, after reducing HAuCl₄, the surface plasmon absorption of the nanoparticles is dominated by gold, revealing the encapsulation of the palladium seeds. These results agree with crystallographic analysis performed with high-resolution TEM pictures, as well as with selected area electron diffraction. The TEM pictures show the core-shell nanoparticles with an average diameter of 9.1 nm, as compared with 5 nm for the palladium seeds, in good agreement with the used Pd:Au molar ratio.     

Green formulation and chemical characterization of Lens culinaris seed aqueous extract conjugated gold nanoparticles for the treatment of acute myeloid leukemia in comparison to mitoxantrone in a leukemic mouse model

The high prevalence of cancer has been increased the rate of studying about the new formulation of chemotherapeutic drugs. In this regards, one of the suitable options is the use of metal nanoparticles for formulating these drugs. In the recent study, Lens culinaris seed aqueous extract conjugated gold nanoparticles (AuNPs) are reported for the first time to exert a dietary therapeutic potential compared to mitoxantrone in an animal model of acute myeloid leukemia. The synthesized AuNPs were characterized using different techniques including UV–Vis., FT-IR, XRD, FE-SEM, and TEM. DPPH free radical scavenging test was done to evaluate the antioxidant potentials of HAuCl₄, L. culinaris, AuNPs, and mitoxantrone. For the analyzing of cytotoxicity effects of HAuCl₄, L. culinaris, AuNPs, and mitoxantrone, MTT assay was used on HUVEC, 32D-FLT3-ITD, Human HL-60/vcr, and Murine C1498 cell lines. In vivo assay, induction of acute myeloid leukemia was done by 7,12-Dimethylbenz[a]anthracene (DMBA) in 75 mice. Then, the animals were randomly divided into six subgroups, including control, untreated, HAuCl₄, L. culinaris, AuNPs, and mitoxantrone. SEM and TEM images showed uniform spherical morphology and average diameters of 10–40 nm for the nanoparticles. DPPH test revealed similar antioxidant potentials for mitoxantrone and AuNPs. Similar to mitoxantrone, AuNPs had low cell viability dose-dependently against 32D-FLT3-ITD, Human HL-60/vcr, and Murine C1498 cell lines without any cytotoxicity on HUVEC cell line. AuNPs and mitoxantrone significantly (p ≤ 0.05) reduced the weight and volume of liver and spleen, the pro-inflammatory cytokines, and the total WBC, blast, neutrophil, monocyte, eosinophil, and basophil counts and increased the mRNA expression of Sphingosine-1-phosphate receptor-1 and Sphingosine-1-phosphate receptor-5, the anti-inflammatory cytokines, and the lymphocyte, platelet, and RBC parameters as compared to the untreated mice. It looks that AuNPs can be administrated as a chemotherapeutic supplement or drug for the treatment of acute myeloid leukemia in the clinical trial.     

3,4‐Dihydroxy‐L‐phenylalanine for Preparation of Gold Nanoparticles and as Electron Transfer Promoter in H2O2 Biosensor

3,4‐Dihydroxy‐L ‐phenylalanine (dopa) and 2‐(3,4‐dihydroxyphenyl)ethylamine (dopamine) were investigated as reducing agent and stabilizer for synthesis of gold nanoparticles (AuNPs) by one‐pot heating of a solution of HAuCl₄/dopa or dopamine. AuNPs with different sizes were obtained by controlling the mass ratios of HAuCl₄/dopa or dopamine. The formation mechanism for AuNPs was also proposed. Immobilization of horseradish peroxidase (HRP) and promotion of its electron transfer by polydopa film were investigated for preparation of H₂O₂ biosensor. Alkaline dopa solution was dropped onto a gold electrode for the formation of polydopa film. HRP was immobilized on the polydopa film through interactions between heme centre of HRP and the amine and carboxyl groups in polydopa. The AuNPs embedded in the polydopa film improved the electron transfer efficiency. These two factors allowed successful development of a H₂O₂ sensor with HRP@polydopa‐AuNPs electrode. Due to its biocompatibility, the polydopa‐AuNPs film provided good retention of enzyme activity and long‐term stability of the sensor. A rapid catalytic response (3 s) and a linear range from 0.006 to 5.0 mmol L^?1 were obtained for H₂O₂. This facile preparation strategy can be extended to other enzyme‐based biosensors.     

Water‐Soluble Gold Nanoparticles: From Catalytic Selective Nitroarene Reduction in Water to Refractive Index Sensing

Water‐soluble gold nanoparticles (Au NPs) stabilized by a nitrogen‐rich poly(ethylene glycol) (PEG)‐tagged substrate have been prepared by reduction of HAuCl₄ with NaBH₄ in water at room temperature. The morphology and size of the nanoparticles can be controlled by simply varying the gold/stabilizer ratio. The nanoparticles have been fully characterized by TEM, high‐resolution (HR) TEM, electron diffraction (ED), energy‐dispersive X‐ray spectroscopy (EDS), UV/Vis, powder XRD, and elemental analysis. The material is efficient as a recyclable catalyst for the selective reduction of nitroarenes with NaBH₄ to yield the corresponding anilines in water at room temperature. Furthermore, the potential ability of the Au NPs as a refractive index sensor owing to their localized surface plasmon resonance (LSPR) effect has also been assessed.     

Chemical characterization and evaluation of antimicrobial and cutaneous wound healing potentials of gold nanoparticles using Allium saralicum R.M. Fritsch

The use of herbal medicines dates back a long way in history. Herbal medicines have been widely used all over the world since ancient times and have been recognized by physicians and patients for their good therapeutic value as they have fewer adverse effects than modern medicines. Recently, researchers have used gold nanoparticles synthesized by plants in the prevention, control, and treatment of infectious disorders and cutaneous wounds. The aims of this study were to synthesize gold nanoparticles from aqueous extract of Allium saralicum R.M. Fritsch (AuNPs) and assess their therapeutic capacities. The nanoparticles were characterized by UV–visible spectroscopy (UV–Vis), Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). FT-IR results offered polysaccharides and protein in A. saralicum were the sources of reducing power, reducing gold ions to AuNPs. According to XRD analysis, the crystal size of the nanoparticles was 41.6 nm. TEM and FE-SEM images exhibited average diameters of 45 nm for the biosynthesized nanoparticles. The synthesized AuNPs had great cell viability on HUVECs line and showed this method was nontoxic. The 2,2-diphenyl-1-picrylhydrazyl free radical scavenging test indicated similar antioxidant potentials for A. saralicum, AuNPs, and butylated hydroxytoluene. To determine the antifungal and antibacterial properties of HAuCl₄, A. saralicum, and AuNPs, agar diffusion tests were used. The aim of the application both HAuCl₄ and A. saralicum in microbial tests was to investigate the synergism effects between them. The minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and minimum fungicidal concentration (MFC) were specified by macro-broth dilution assay. AuNPs exhibited higher antifungal and antibacterial effects than all standard antibiotics (p ≤ 0.01). The MIC and MBC of AuNPs against all bacteria were in the ranges 1–4 mg/ml and 2–8 mg/ml, respectively. The MIC and MFC of AuNPs against all fungi were in the ranges 1–4 mg/ml and 2–4 mg/ml, respectively. In vivo part, AuNPs ointment group raised significantly (p ≤ 0.01) the wound contracture, vessel, hydroxyl proline, hexuronic acid, fibrocyte, fibroblast, and fibrocytes/fibroblast rate and decreased significantly (p ≤ 0.01) the wound area, total cells, and lymphocyte compared to other groups in rats. The results of FT-IR, UV–Vis, XRD, TEM, and FE-SEM analyses confirm that the aqueous extract of A. saralicum leaves can be used to yield gold nanoparticles with a notable amount of remedial effects without any cytotoxicity against HUVECs.