Long‐Term Stable Silver Subsurface Ion‐Exchanged Glasses for SERS Applications

We report on the formation of silver subsurface ion‐exchanged metal oxide (silver SIMO) glasses and their surface‐enhanced Raman scattering (SERS) activity. The samples were prepared by a combined thermal and chemical three‐step methodology and characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), environmental electron scanning microscopy (ESEM), and UV/Vis spectroscopy. This unique method provides SERS substrates with protection against contamination and strong, reliable and reproducible SERS enhancement. The Raman enhancement factors of the long‐term stable SIMO glasses were estimated to approximately 10⁷.     

Noble‐Metal‐Free Materials for Surface‐Enhanced Raman Spectroscopy Detection

Surface‐enhanced Raman spectroscopy (SERS) is an attractive tool for the sensing of molecules in the fields of chemical and biochemical analysis as it enables the sensitive detection of molecular fingerprint information even at the single‐molecule level. In addition to traditional coinage metals in SERS analysis, recent research on noble‐metal‐free materials has also yielded highly sensitive SERS activity. This Minireview presents the recent development of noble‐metal‐free materials as SERS substrates and their potential applications, especially semiconductors and emerging graphene‐based nanostructures. Rather than providing an exhaustive review of this field, possible contributions from semiconductor substrates, characteristics of graphene enhanced Raman scattering, as well as effect factors such as surface plasmon resonance, structure and defects of the nanostructures that are considered essential for SERS activity are emphasized. The intention is to illustrate, through these examples, that the promise of noble‐metal‐free materials for enhancing detection sensitivity can further fuel the development of SERS‐related applications.     

New Tools for Investigating Electromagnetic Hot Spots in Single‐Molecule Surface‐Enhanced Raman Scattering

Surface‐enhanced Raman scattering (SERS) is quickly growing as an analytical technique, because it offers both molecular specificity and excellent sensitivity. For select substrates, SERS can even be observed from single molecules, which is the ultimate limit of detection. This review describes recent developments in the field of single‐molecule SERS (SM‐SERS) with a focus on new tools for characterizing SM‐SERS‐active substrates and how they interact with single molecules on their surface. In particular, techniques that combine optical spectroscopy and microscopy with electron microscopy are described, including correlated optical and transmission electron microscopy, correlated super‐resolution imaging and scanning electron microscopy, and correlated optical microscopy and electron energy loss spectroscopy.     

Rolling‐Circle Amplification Detection of Thrombin Using Surface‐Enhanced Raman Spectroscopy with Core‐Shell Nanoparticle Probe

An ultrasensitive surface‐enhanced Raman spectroscopy (SERS) sensor based on rolling‐circle amplification (RCA)‐increased “hot‐spot” was developed for the detection of thrombin. The sensor contains a SERS gold nanoparticle@Raman label@SiO₂ core‐shell nanoparticle probe in which the Raman reporter molecules are sandwiched between a gold nanoparticle core and a thin silica shell by a layer‐by‐layer method. Thrombin aptamer sequences were immobilized onto the magnetic beads (MBs) through hybridization with their complementary strand. In the presence of thrombin, the aptamer sequence was released; this allowed the remaining single‐stranded DNA (ssDNA) to act as primer and initiate in situ RCA reaction to produce long ssDNAs. Then, a large number of SERS probes were attached on the long ssDNA templates, causing thousands of SERS probes to be involved in each biomolecular recognition event. This SERS method achieved the detection of thrombin in the range from 1.0×10^?12 to 1.0×10^?8 M and a detection limit of 4.2×10^?13 M , and showed good performance in real serum samples.     

Photocatalytically Powered Matchlike Nanomotor for Light‐Guided Active SERS Sensing

Surface enhanced Raman spectroscopy (SERS) is a powerful optical sensing technique that can detect analytes of extremely low concentrations. However, the presence of enough SERS probes in the detection area and a close contact between analytes and SERS probes are critical for efficient acquisition of a SERS signal. Presented here is a light‐powered micro/nanomotor (MNM) that can serve as an active SERS probe. The matchlike AgNW@SiO₂ core–shell structure of the nanomotors work as SERS probes based on the shell‐isolated enhanced Raman mechanism. The AgCl tail serves as photocatalytic nanoengine, providing a self‐propulsion force by light‐induced self‐diffusiophoresis. The phototactic behavior was utilized to achieve enrichment of the nanomotor‐based SERS probes for on‐demand biochemical sensing. The results demonstrate the possibility of using photocatalytic nanomotors as active SERS probes for remote, light‐controlled, and smart biochemical sensing on the micro/nanoscale.     

Rapid,Label‐free Optical Spectroscopy Platform for Diagnosis of Heparin‐Induced Thrombocytopenia

The use of surface‐enhanced Raman spectroscopy (SERS) to determine spectral markers for the diagnosis of heparin‐induced thrombocytopenia (HIT), a difficult‐to‐diagnose immune‐related complication that often leads to limb ischemia and thromboembolism, is proposed. The ability to produce distinct molecular signatures without the addition of labels enables unbiased inquiry and makes SERS an attractive complementary diagnostic tool. A capillary‐tube‐derived SERS platform offers ultrasensitive, label‐free measurement as well as efficient handling of blood serum samples. This shows excellent reproducibility, long‐term stability and provides an alternative diagnostic rubric for the determination of HIT by leveraging machine‐learning‐based classification of the spectroscopic data. We envision that a portable Raman instrument could be combined with the capillary‐tube‐based SERS analytical tool for diagnosis of HIT in the clinical laboratory, without perturbing the existing diagnostic workflow.     

Recent strategies toward microfluidic‐based surface‐enhanced Raman spectroscopy

Surface‐enhanced Raman spectroscopy (SERS) is an extremely powerful analytical tool, which not only yields information about the molecular structure of the analyte in the form of characteristic vibrational spectrum but also gives sensitivities approaching those in fluorescence spectroscopy. The SERS measurement on the microfluidic platform provides possibility to manufacture the device with design perfectly fulfilling the needs of the application with minimal sample consumption. This review aims at describing basic strategies for SERS measurement in microfluidic devices published in the last decade and covers current trends in microfluidics with SERS detection in the field of bioanalysis and approaches toward on‐line coupling of liquid‐based separation techniques with SERS detection.     

A review of developments and applications of thin‐film microextraction coupled to surface‐enhanced Raman scattering

Surface‐enhanced Raman scattering (SERS) greatly expands the applications of Raman spectroscopy and is a promising technique for food safety, environmental analysis, and public safety. Thin‐film microextraction (TFME) provides an efficient sample preparation method for SERS to improve its selectivity and detection efficiency. This review comprehensively describes the development and applications of SERS and TFME, including the history, mechanisim, and active substrate of SERS and the theory, device, forms, and practical applications of TFME. The applications of TFME‐SERS in food safety and environment monitoring are discussed, which could improve their advantages. TFME extracts and enriches the target analytes to eliminate the interfering substance, providing a facial way for SERS to analyze the target analytes in complex matrices. The development of TFME‐SERS technology not only expands the application range of TFME, but greatly improves the anti‐interference ability and detection sensitivity of SERS. Thus, the established methods are fast, convenient, and highly sensitive. This technology is potential to be applied in the on‐site and real‐time detection.     

Local and Remote Charge‐Transfer‐Enhanced Raman Scattering on One‐Dimensional Transition‐Metal Oxides

The one‐dimensional (1D) transition‐metal oxide MoO₃ belt is synthesized and characterized with X‐ray diffraction, scanning electron microscopy, and Raman spectroscopy. Charge‐transfer‐(CT) enhanced Raman scattering of 4‐mercaptobenzoic acid (4‐MBA) on a 1D MoO₃ belt was investigated experimentally and theoretically. The chemical enhancement of surface‐enhanced Raman scattering (SERS) of 4‐MBA on the MoO₃ belt by CT is in the order of 10³. The SERS of 4‐MBA was investigated theoretically by using a quantum chemical method. The remote SERS of 4‐MBA along the 1D MoO₃ belt (the light excitation to one side of the MoO₃ belt, and the SERS spectrum is collected on the other side of the MoO₃ belt) is also shown experimentally, which provides potential applications of SERS. The incident polarization dependence of remote SERS spectra has also been investigated experimentally.     

Boron Nitride Nanosheets Improve Sensitivity and Reusability of Surface‐Enhanced Raman Spectroscopy

Surface enhanced Raman spectroscopy (SERS) is a useful multidisciplinary analytic technique. However, it is still a challenge to produce SERS substrates that are highly sensitive, reproducible, stable, reusable, and scalable. Herein, we demonstrate that atomically thin boron nitride (BN) nanosheets have many unique and desirable properties to help solve this challenge. The synergic effect of the atomic thickness, high flexibility, stronger surface adsorption capability, electrical insulation, impermeability, high thermal and chemical stability of BN nanosheets can increase the Raman sensitivity by up to two orders, and in the meantime attain long‐term stability and extraordinary reusability not achievable by other materials. These advances will greatly facilitate the wider use of SERS in many fields.     

Nanoscale Chemical Imaging Using Tip‐Enhanced Raman Spectroscopy: A Critical Review

Methods for chemical analysis at the nanometer scale are crucial for understanding and characterizing nanostructures of modern materials and biological systems. Tip‐enhanced Raman spectroscopy (TERS) combines the chemical information provided by Raman spectroscopy with the signal enhancement known from surface‐enhanced Raman scattering (SERS) and the high spatial resolution of atomic force microscopy (AFM) or scanning tunneling microscopy (STM). A metallic or metallized tip is illuminated by a focused laser beam and the resulting strongly enhanced electromagnetic field at the tip apex acts as a highly confined light source for Raman spectroscopic measurements. This Review focuses on the prerequisites for the efficient coupling of light to the tip as well as the shortcomings and pitfalls that have to be considered for TERS imaging, a fascinating but still challenging way to look at the nanoworld. Finally, examples from recent publications have been selected to demonstrate the potential of this technique for chemical imaging with a spatial resolution of approximately 10 nm and sensitivity down to the single‐molecule level for applications ranging from materials sciences to life sciences.     

Activation of Oxygen on Gold and Silver Nanoparticles Assisted by Surface Plasmon Resonances

Surface plasmon resonances (SPRs) have been found to promote chemical reactions. In most oxidative chemical reactions oxygen molecules participate and understanding of the activation mechanism of oxygen molecules is highly important. For this purpose, we applied surface‐enhanced Raman spectroscopy (SERS) to find out the mechanism of SPR‐assisted activation of oxygen, by using p‐aminothiophenol (PATP), which undergoes a SPR‐assisted selective oxidation, as a probe molecule. In this way, SPR has the dual function of activating the chemical reaction and enhancing the Raman signal of surface species. Both experiments and DFT calculations reveal that oxygen molecules were activated by accepting an electron from a metal nanoparticle under the excitation of SPR to form a strongly adsorbed oxygen molecule anion. The anion was then transformed to Au or Ag oxides or hydroxides on the surface to oxidize the surface species, which was also supported by the heating effect of the SPR. This work points to a promising new era of SPR‐assisted catalytic reactions.     

Doping and metallic‐support effect evidenced on SERS spectra of polyaniline thin films

Surface‐enhanced Raman scattering (SERS) is a process with origins, electromagnetic and chemical. The electromagnetic enhancement consists of the excitation of surface plasmons in the metallic support of the thin film. With only the electromagnetic enhancement mechanism, the surface spectra should not differ from volume Raman spectra. However, between SERS and volume Raman spectra, there are differences resulting from the chemical reactions taking place at the polymer/metal interface, intermediated by solvent molecules, that finally depend on the types of polymers and metallic supports. Polyaniline (PAN) is an excellent material to emphasize the chemical component of SERS. This is due to its particular structure with a repeating unit that contains two entities at different weights—a reduced state and an oxidized state–that, in turn, react differently with a metallic substrate. SERS spectra depend on the oxidizing properties of the metal surface, which involves an intermediate compound of the types Ag₂O and Au₂O₃ when N‐methyl‐2‐pyrrolidinone is used as the solvent. This article presents new results concerning the surface chemical effects that produce variations of the PAN SERS spectra. The SERS spectra of the PAN emeraldine base (PAN‐EB) layered on Au support are characterized by a semiquinoid structure that we believe is induced on the intermediate compound Au₂O₃. In the presence of H₂SO₄, the SERS spectra change gradually as the degree of acid protonation doping increases. The SERS spectra of the fully protonated PAN‐EB are identical to those obtained on PAN emeraldine salt (PAN‐ES) synthesized by cyclic voltammetry in an acid medium and are invariable with the type of metallic support. The SERS spectra show that the emeraldine salt can be partially or totally deprotonated with water or NH₄OH. The deprotonation is complete for the Ag support and partial for the Au support. The SERS spectra of the fully protonated PAN‐EB are characterized by a double band with maxima at about 1330 and 1370 cm⁻¹. Although the generation process of positive charge on the macromolecular chain of PAN‐EB doped in the presence of (C₄H₉)₄NBF₄ is similar to that due to protonic acid doping, involving cation addition (C₄H or H⁺ ions, respectively) in SERS spectra, the complex band situated at about 1330–1370 cm⁻¹ no longer appears. The doping of PAN‐EB with FeCl₃ produces two polymer forms: a salt type characterized by a protonated structure similar to that found for PAN‐ES and a base type similar to the leucoemeraldine form. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2599–2609, 2000     

Distance‐dependent Enhancement in Raman Spectroscopy Probed by Conjugated Molecules with Different Molecular Lengths

In this study, the distance‐dependent enhancement effect in surface‐enhanced Raman scattering (SERS) was explored with molecules bearing different lengths of conjugated double bonds. These conjugated molecules were synthesized utilizing the diazotization‐coupling reaction allowing a thio group on one end and a nitro group on the other end. The thiol group allows the probed molecule to chemisorb on the surface of silver nanoparticles (AgNPs). The opposite end of each molecule contains a nitro group, which gives an intense SERS signal to show a fair and accurate comparison of the effect of chain length. The obtained SERS intensities were correlated with the chain lengths of these synthesized molecules, which ranged from 0.6 to 2.0 nm between the nitro and thiol groups. Based on these results, the electromagnetic field effect was mainly responsible for the signal enhancements in SERS measurements. Also, the obtained signals were exponentially decayed due to the distances of the surface of AgNPs. Based on the SERS intensities of the conjugated molecules, the contribution of CT effect to SERS for these examined molecules were limited.     

Towards Reliable and Quantitative Surface‐Enhanced Raman Scattering (SERS): From Key Parameters to Good Analytical Practice

Experimental results obtained in different laboratories world‐wide by researchers using surface‐enhanced Raman scattering (SERS) can differ significantly. We, an international team of scientists with long‐standing expertise in SERS, address this issue from our perspective by presenting considerations on reliable and quantitative SERS. The central idea of this joint effort is to highlight key parameters and pitfalls that are often encountered in the literature. To that end, we provide here a series of recommendations on: a) the characterization of solid and colloidal SERS substrates by correlative electron and optical microscopy and spectroscopy, b) on the determination of the SERS enhancement factor (EF), including suitable Raman reporter/probe molecules, and finally on c) good analytical practice. We hope that both newcomers and specialists will benefit from these recommendations to increase the inter‐laboratory comparability of experimental SERS results and further establish SERS as an analytical tool.     

ZnGa2O4 Nanorod Arrays Decorated with Ag Nanoparticles as Surface‐Enhanced Raman‐Scattering Substrates for Melamine Detection

The availability of sensitive, reproducible, and stable substrates is critically important for surface‐enhanced Raman spectroscopy (SERS)‐based applications, but it presently remains a challenge. In this work, well‐aligned zinc gallate (ZnGa₂O₄) nanorod arrays grown on a Si substrate by chemical vapor deposition were used as templates to fabricate SERS substrates by deposition of Ag nanoparticles onto the ZnGa₂O₄ nanorod surfaces. The coverage of the Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces was easily controlled by varying the amount of AgNO₃. SERS measurements showed that the number density of Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces had a great effect on SERS activity. The SERS signals collected by point‐to‐point and SERS mapping images showed that as‐prepared SERS substrates exhibited good spatial uniformity and reproducibility. Detection of melamine molecules at low concentrations (1.0×10^?7 M ) was used as an example to show the possible application of such a substrate. In addition, the effect of benzoic acid on the detection of melamine was also investigated. It was found that the SERS signal intensity of melamine decreased greatly as the concentration of benzoic acid was increased.     

Aptamer‐Based SERS Assay of ATP and Lysozyme by Using Primer Self‐Generation

A simple bifunctional surface‐enhanced Raman scattering (SERS) assay based on primer self‐generation strand‐displacement polymerization (PS‐SDP) is developed to detect small molecules or proteins in parallel. Triphosphate (ATP) and lysozyme are used as the models of small molecules and proteins. Compared to traditional bifunctional methods, the method possesses some remarkable features as follows: 1) by virtue of the simple PS‐SDP reaction, a bifunctional aptamer assembly binding of trigger 1 and trigger 2 was used as a functional structure for the simultaneous sensing of ATP or lysozyme. 2) The concept of isothermal amplification bifunctional detection has been first introduced into SERS biosensing applications as a signal‐amplification tool. 3) The problem of high background induced by excess bio‐barcodes is circumvented by using magnetic beads (MBs) as the carrier of signal‐output products and massive of hairpin DNA binding with SERS active bio‐barcodes relied on Au nanoparticles (Au NPs), SERS signal is significantly enhanced. Overall, with multiple amplification steps and one magnetic‐separation procedure, this flexible biosensing system exhibited not only high sensitivity and specificity, with the detection limits of ATP and lysozyme of 0.05 nM and 10 fM , respectively.     

SERS Detection of Small Inorganic Molecules and Ions

Surface‐enhanced Raman scattering (SERS) is one of the most straightforward applications of the so‐called nanoplasmonics. This powerful molecular spectroscopy technique is based on the enhancement of the inelastic scattering from molecules located near nanostructured metallic surfaces when these are illuminated and surface plasmons are excited. The analytical applications of SERS are hindered when the Raman cross‐section of the analyte is too low, which is often the case in inorganic molecular species. This problem is even more serious when atomic species are to be identified, since these cannot display a vibrational signal. Herein we discuss the recent advancements toward the SERS detection of small inorganic compounds, including both molecular and atomic species.     

SERS Enhancement on the Basis of Temperature‐Dependent Chemisorption: Microcalorimetric Evidence

The mechanism of surface‐enhanced Raman spectroscopy (SERS) is not very clear in view of the magnitude of the contribution of electromagnetic factor as well as the chemical mechanism. This report presents the extent of adsorption at different temperatures in terms of signal enhancements in SERS employing silver nanoparticles (AgNPs) of various shapes as substrate and dye molecules, crystal violet or Rhodamine 6G, as model Raman probes. Initially, the SERS signal increases with increasing temperature until a maximum intensity is reached, before it gradually decreases with increasing temperature. This trend is independent of the shape of the Raman substrates and probes. However, the temperature at which maximum intensity is obtained may depend upon the nature of the Raman probe. The energetics involved in the chemisorption process between dye molecules and AgNPs were determined through isothermal titration calorimetry and their implications for the observed SERS signals were assessed. The maximum heat change occurred at the temperature at which the maximum signal enhancement in SERS was obtained and the enhanced interaction at optimum temperature was confirmed by absorption spectroscopy.     

Novel Bottom‐Up SERS Substrates for Quantitative and Parallelized Analytics

Surface‐enhanced Raman spectroscopy (SERS) is an emerging technology in the field of analytics. Due to the high sensitivity in connection with specific Raman molecular fingerprint information SERS can be used in a variety of analytical, bioanalytical, and biosensing applications. However, for the SERS effect substrates with metal nanostructures are needed. The broad application of this technology is greatly hampered by the lack of reliable and reproducible substrates. Usually the activity of a given substrate has to be determined by time‐consuming experiments such as calibration or ultramicroscopic studies. To use SERS as a standard analytical tool, cheap and reproducible substrates are required, preferably with a characterization technique that does not interfere with the subsequent measurements. Herein we introduce an innovative approach to produce low‐cost and large‐scale reproducible substrates for SERS applications, which allows easy and economical production of micropatterned SERS active surfaces on a large scale. This approach is based on an enzyme‐induced growth of silver nanostructures. The special structural feature of the enzymatically deposited silver nanoparticles prevents the breakdown of SERS activity even at high particle densities (particle density >60 %) that lead to a conductive layer. In contrast to other approaches, this substrate exhibits a relationship between electrical conductivity and the resulting SERS activity of a given spot. This enables the prediction of the SERS activity of the nanostructure ensemble and therewith the controllable and reproducible production of SERS substrates of enzymatic silver nanoparticles on a large scale, utilizing a simple measurement of the electrical conductivity. Furthermore, through a correlation between the conductivity and the SERS activity of the substrates it is possible to quantify SERS measurements with these substrates.