Synthesis,Structure, and Photoluminescence Properties of Novel KBaSc2(PO4)3:Ce3+/Eu2+/Tb3+ Phosphors for White‐Light‐Emitting Diodes

A series of novel KBaSc₂(PO₄)₃:Ce³⁺/Eu²⁺/Tb³⁺phosphors are prepared using a solid‐state reaction. X‐ray diffraction analysis and Rietveld structure refinement are used to check the phase purity and crystal structure of the prepared samples. Ce³⁺‐ and Eu²⁺‐doped phosphors both have broad excitation and emission bands, owing to the spin‐ and orbital‐allowed electron transition between the 4f and 5d energy levels. By co‐doping the KBaSc₂(PO₄)₃:Eu²⁺ and KBaSc₂(PO₄)₃:Ce³⁺ phosphors with Tb³⁺ ions, tunable colors from blue to green can be obtained. The critical distance between the Eu²⁺ and Tb³⁺ ions is calculated by a concentration quenching method and the energy‐transfer mechanism for Eu²⁺→Tb³⁺ is studied by utilizing the Inokuti–Hirayama model. In addition, the quantum efficiencies of the prepared samples are measured. The results indicate that KBaSc₂(PO₄)₃:Eu²⁺,Tb³⁺ and KBaSc₂(PO₄)₃:Ce³⁺,Tb³⁺ phosphors might have potential applications in UV‐excited white‐light‐emitting diodes.     

Tailoring of Deep‐Red Luminescence in Ca2SiO4:Eu2+

We report a new dicalcium silicate phosphor, Ca_2?xEu_xSiO₄, which emits red light in response to blue‐light excitation. When excited at 450 nm, deep‐red emission at 650 nm was clearly observed in Ca_1.2Eu_0.8SiO₄, the external and internal quantum efficiencies of which were 44 % and 50 %, respectively. The red emission from Ca_2?xEu_xSiO₄ was strongly related to the peculiar coordination environments of Eu²⁺ in two types of Ca sites. The red‐emitting Ca₂SiO₄:Eu²⁺ phosphors are promising materials for next‐generation, white‐light‐emitting diode applications.     

Synthesis and characterization of novel blue emitting Na2CaSiO4:Ce3+ phosphor

The blue phosphors Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ were synthesized by the sol–gel method and their luminescence characteristics were investigated for the first time. Structural information about prepared samples is obtained by analyzing the XRD patterns and SEM micrographs. The photoluminescence (PL) excitation spectra indicate that the Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ phosphors can be effectively excited by ultraviolet (360 nm) light. The PL emission spectra exhibit tunable blue broadband emission with the dominant wavelength of 427–447 nm under excitation of 360 nm by controlling the doping concentration of Ce³⁺. The concentration quenching effect for Ce³⁺ was found at the optimum doping concentration of 4 mol%. The Commission Internationale de l’Eclairage 1931 chromaticity coordinates of Na_1.96Ca_0.96SiO₄:0.04Ce³⁺ are (0.1447, 0.0787), which are better color purity compared to the commercial Eu²⁺-doped BaMgAl₁₀O₁₇ phosphor. Na_1.96Ca_0.96SiO₄:0.04Ce³⁺ composition shows intense blue emission (peak wavelength, 439 nm) with relative intensity versus commercial BaMgAl₁₀O₁₇:Eu²⁺ blue phosphor (Nichia) 65 and 158 % under 254 and 365 nm excitation, respectively. All the results indicate that Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ phosphors are potential candidate as a blue emitting phosphor for UV-converting white light-emitting diodes.     

Dual‐Shelled RbLi(Li3SiO4)2:Eu2+@Al2O3@ODTMS Phosphor as a Stable Green Emitter for High‐Power LED Backlights

The stability of luminescent materials is a key factor for the practical application in white light‐emitting diodes (LEDs). Poor chemical stability of narrow‐band green‐emitting RbLi(Li₃SiO₄)₂:Eu²⁺ (RLSO:Eu²⁺) phosphor hinders their further commercialization even if they have excellent stability against thermal quenching. Herein, we propose an efficient protection scheme by combining the surface coating of amorphous Al₂O₃ and hydrophobic modification by octadecyltrimethoxysilane (ODTMS) to construct the moisture‐resistant dual‐shelled RLSO:Eu²⁺@Al₂O₃@ODTMS composite. The growth mechanisms of both the Al₂O₃ inorganic layer and the silane organic layer on the phosphor surface are investigated. The results remarkably improve the water‐stability of this narrow‐band green emitter. The evaluation of the white LED by employing this composite as the green component demonstrates that RLSO:Eu²⁺@Al₂O₃@ODTMS is a promising candidate for the high‐performance display backlights, and this dual‐shelled strategy provides an alternative method to improve the moisture‐resistant property of humidity‐sensitive phosphors.     

Photoluminescence Properties of a Promising Red-emitting Phosphor CaNb2O6:EU3+for Trichromatic White Light Emitting Diodes Application

Motivated by the need for new phosphors of white light emitting diode (WLED) application, Ca_0.95Nb₂ O₆:Eu³⁺_0.05 phosphors were synthesized by high temperature solid‐state reaction. Increasing the content of doped‐Eu³⁺ and adding the co‐activator Bi³⁺ to improve the photoluminescence (PL) intensity of Ca_1?xNb₂ O₆Eu³⁺_x phosphors were investigated in detail. The effects of Eu³⁺ were better than that of Bi³⁺ on the PL intensity of Ca_1?xNb₂ O₆Eu³⁺_x phosphors. Compared with Y₂O₂ S:0.05Eu³⁺ the Ca_0.70Nb₂ O₆:Eu³⁺_0.03 phosphor could be excited efficiently by UV (395 nm) light and emit the red light at 614 nm with line spectra, which were coupled well with the characteristic emission from UV‐Near UV LED. The CIE (International Commission on Illumination) chromaticity coordinates (x?0.654, y?0.348) of Ca_0.70Nb₂O₆:Eu³⁺_0.03 were close to the NTSC (National Television Standard Committee) standard values. Therefore Ca_0.70Nb₂ O₆:Eu³⁺_0.03 might find application to UV‐Near UV InGaN chip‐based white light emitting diodes, which is further proved by the LED fabrication with the Ca_0.70Nb₂ O₆:Eu³⁺_0.03 phosphor.     

Enhancement of the photoluminescence and long afterglow properties of Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphor by Dy<Superscript>3+</Superscript> co-doping

The Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) techniques. The luminescence properties were investigated using thermoluminescence (TL), photoluminescence (PL), long afterglow, mechanoluminescence (ML), and ML spectra techniques. The crystal structure of sintered phosphors was an akermanite type structure, which belongs to the tetragonal crystallography. TL properties of these phosphors were investigated, and the results were also compared. Under the ultraviolet excitation, the emission spectra of both prepared phosphors were composed of a broad band peaking at 535 nm, belonging to the broad emission band. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co-doped with Dy³⁺, the PL, afterglow and ML intensity is strongly enhanced. The decay graph indicates that both the sintered phosphors contain fast decay and slow decay process. The ML intensities of Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were proportionally increased with the increase of impact velocity, which suggests that this phosphor can be used as sensors to detect the stress of an object.     

Alkali Lithosilicates: Renaissance of a Reputable Substance Class with Surprising Luminescence Properties

A hitherto unknown synthetic access to alkali lithosilicates, a substance class first described by Hoppe in the 1980s, is reported. With the synthesis and characterization of NaK₇[Li₃SiO₄]₈, a new representative has been discovered, expanding the family of known alkali lithosilicates. Astonishingly, NaK₇[Li₃SiO₄]₈ and the already established alkali lithosilicates Na[Li₃SiO₄] as well as K[Li₃SiO₄] display unforeseen luminescence properties, when doped with Eu²⁺. Na[Li₃SiO₄]:Eu²⁺ exhibits an ultra‐narrow blue, K[Li₃SiO₄]:Eu²⁺ a broadband, and NaK₇[Li₃SiO₄]₈:Eu²⁺ a yellow‐green double emission upon excitation with near‐UV to blue light. Consequently, all of the investigated substances of this class of compounds are highly interesting phosphors for application in phosphor converted LEDs.     

Synthesis,characterization, and photoluminescence of SrBPO5:R,Na+ (R = Eu3+, Tb3+) phosphor for solid state lighting

A series of phosphors SrBPO₅:R,Na⁺ (R = Eu³⁺, Tb³⁺) were prepared by high-temperature solid-state synthesis, and their phase purity, morphology, IR spectra, and UV-Vis photoluminescence properties were investigated. The f-f transitions of Eu³⁺ and Tb³⁺ ions in the host lattice were assigned and discussed. The excitation and emission spectra indicate that SrBPO₅:Eu³⁺,Na⁺ and SrBPO₅:Tb³⁺,Na⁺ can be effectively excited by ultraviolet (394 and 370 nm), and exhibit reddish orange emission and yellowish green emission, respectively. The influence of the doping concentration on the relative emission intensity of Eu³⁺/Tb³⁺ was investigated, and the critical distance R_c was estimated in term of the concentration quenching data. The present study suggests SrBPO₅:R,Na⁺ (R = Eu³⁺, Tb³⁺) phosphor can be a potential candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

A new disordered langbeinite‐type compound,K2Tb1.5Ta0.5P3O12, and Eu3+‐doped multicolour light‐emitting properties

For the first time, a new langbeinite‐type phosphate, namely potassium terbium tantalum tris(phosphate), K₂Tb_1.5Ta_0.5(PO₄)₃, has been prepared successfully using a high‐temperature flux method and has been structurally characterized by single‐crystal X‐ray diffraction. The results show that its structure can be described as a three‐dimensional open framework of [Tb_1.5Ta_0.5(PO₄)₃]_∞ interconnected by K⁺ ions. The Tb^III and Ta^V cations in the structure are disordered and occupy the same crystallographic sites. The IR spectrum, the UV–Vis spectrum, the morphology and the Eu³⁺‐activated photoluminescence spectroscopic properties were studied. A series of Eu³⁺‐doped phosphors, i.e. K₂Tb_1.5–xTa_0.5(PO₄)₃:xEu³⁺ (x = 0.01, 0.03, 0.05, 0.07, 0.10), were prepared via a solid‐state reaction and the photoluminescence properties were studied. The results show that under near‐UV excitation, the luminescence colour can be tuned from green through yellow to red by simply adjusting the Eu³⁺ concentration from 0 to 0.1, because of the efficient Tb³⁺→Eu³⁺ energy‐transfer mechanism.     

Hydrothermal synthesis of core-shell structured PS@GdPO<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> spherical particles and their luminescence properties

Non-aggregated spherical polystyrene (PS) particles were coated with GdPO₄:Tb³⁺/Ce³⁺ phosphor layers by a conventional hydrothermal synthesis using poly(vinylpyrrolidone) (PVP) as an additive without further annealing treatment. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL), as well as luminescence decay experiments were used to characterise the resulting core-shell structured PS@GdPO₄:Tb³⁺/Ce³⁺ samples. The results of XRD indicated that the PS particles were successfully coated with the GdPO₄:Tb³⁺/Ce³⁺ phosphor layers, which could be further verified by the images of FESEM. Under ultraviolet excitation, the PS@GdPO₄:Tb³⁺/Ce³⁺ phosphors show Tb³⁺ characteristic emission, i.e. ⁵D₄-⁷F_J (J = {6, 5, 4, 3}) emission lines with green emission ⁵D₄-⁷F₅ (543 nm) as the most prominent group. The core-shell phosphors so obtained have potential applications in field emission display (FED) and plasma display panels (PDP).     

Energy Transfer from Ce3+ to Tb3+/Dy3+/Mn2+ in Ca9Ga(PO4)7 Phosphors: Synthesis,Structure and Tunable Multicolor Luminescent Properties

A series of Ca₉Ga(PO₄)₇:Ce³⁺/Tb³⁺/Dy³⁺/Mn²⁺ phosphors with tunable color, in which Ce³⁺ acts as the sensitizer, was synthesized. Energy transfer (ET) from Ce³⁺ to Tb³⁺/Dy³⁺/Mn²⁺ was investigated in detail. Tb³⁺/Dy³⁺/Mn²⁺ single-doped Ca₉Ga(PO₄)₇ can exhibit green, yellow, and red emission, respectively. Incorporating Ce³⁺ into a Tb³⁺/Dy³⁺/Mn²⁺ single-doped Ca₉Ga(PO₄)₇ phosphor can remarkably promote the luminous efficiency of the Tb³⁺/Dy³⁺/Mn²⁺ ions. This enhancement originates from an efficient ET from Ce³⁺ to Tb³⁺/Dy³⁺/Mn²⁺. The ET was validated by luminescence spectra, decay dynamics, and schematic energy levels. Moreover, the intensity ratio of red emission of Mn²⁺ to violet emission of Ce³⁺ was analyzed based on energy-transfer and lifetime measurements. In Ce³⁺-Tb³⁺, Ce³⁺-Dy³⁺, and Ce³⁺-Mn²⁺ doped Ca₉Ga(PO₄)₇, the emitting color changed from violet to green, yellow, and red, respectively, which indicates the potential use of this new tunable phosphor in UV light-emitting diodes.     

Dual-Shelled RbLi(Li3SiO4)2:Eu2+@Al2O3@ODTMS Phosphor as a Stable Green Emitter for High-Power LED Backlights

The stability of luminescent materials is a key factor for the practical application in white light-emitting diodes (LEDs). Poor chemical stability of narrow-band green-emitting RbLi(Li₃SiO₄)₂:Eu²⁺ (RLSO:Eu²⁺) phosphor hinders their further commercialization even if they have excellent stability against thermal quenching. Herein, we propose an efficient protection scheme by combining the surface coating of amorphous Al₂O₃ and hydrophobic modification by octadecyltrimethoxysilane (ODTMS) to construct the moisture-resistant dual-shelled RLSO:Eu²⁺@Al₂O₃@ODTMS composite. The growth mechanisms of both the Al₂O₃ inorganic layer and the silane organic layer on the phosphor surface are investigated. The results remarkably improve the water-stability of this narrow-band green emitter. The evaluation of the white LED by employing this composite as the green component demonstrates that RLSO:Eu²⁺@Al₂O₃@ODTMS is a promising candidate for the high-performance display backlights, and this dual-shelled strategy provides an alternative method to improve the moisture-resistant property of humidity-sensitive phosphors.     

Improvement of the Water Resistance of a Narrow‐Band Red‐Emitting SrLiAl3N4:Eu2+ Phosphor Synthesized under High Isostatic Pressure through Coating with an Organosilica Layer

A SrLiAl₃N₄:Eu²⁺ (SLA) red phosphor prepared through a high‐pressure solid‐state reaction was coated with an organosilica layer with a thickness of 400–600 nm to improve its water resistance. The observed 4f⁶5d→4f⁷ transition bands are thought to result from the existence of Eu²⁺ at two different Sr²⁺ sites. Luminescence spectra at 10 K revealed two zero‐phonon lines at 15377 (for Eu(Sr1)) and 15780 cm^?1 (for Eu(Sr2)). The phosphor exhibited stable red emission under high pressure up to 312 kbar. The configurational coordinate diagram gave a theoretical explanation for the Eu^2+/3+ result. The coated samples showed excellent moisture resistance while retaining an external quantum efficiency (EQE) of 70 % of their initial EQE after aging for 5 days under harsh conditions. White‐light‐emitting diodes of the SLA red phosphor and a commercial Y₃Al₅O₁₂:Ce³⁺ yellow phosphor on a blue InGaN chip showed high color rendition (CRI=89, R9=69) and a low correlated color temperature of 2406 K.     

Learning from a Mineral Structure toward an Ultra‐Narrow‐Band Blue‐Emitting Silicate Phosphor RbNa3(Li3SiO4)4:Eu2+

Learning from natural mineral structures is an efficient way to develop potential host lattices for applications in phosphor converted (pc)LEDs. A narrow‐band blue‐emitting silicate phosphor, RbNa₃(Li₃SiO₄)₄:Eu²⁺ (RNLSO:Eu²⁺), was derived from the UCr₄C₄‐type mineral model. The broad excitation spectrum (320–440 nm) indicates this phosphor can be well matched with the near ultraviolet (n‐UV) LED chip. Owing to the UCr₄C₄‐type highly condensed and rigid framework, RNLSO:Eu²⁺ exhibits an extremely small Stokes shift and an unprecedented ultra‐narrow (full‐width at half‐maximum, FWHM=22.4 nm) blue emission band (λ_em=471 nm) as well as excellent thermal stability (96 %@150 °C of the initial integrated intensity at 25 °C). The color gamut of the as‐fabricated (pc)LEDs is 75 % NTSC for the application in liquid crystal displays from the prototype design of an n‐UV LED chip and the narrow‐band RNLSO:Eu²⁺ (blue), β‐SiAlON:Eu²⁺ (green), and K₂SiF₆:Mn⁴⁺ (red) components as RGB emitters.     

Waterproof Alkyl Phosphate Coated Fluoride Phosphors for Optoelectronic Materials

A facile approach for coating red fluoride phosphors with a moisture‐resistant alkyl phosphate layer with a thickness of 50–100 nm is reported. K₂SiF₆:Mn⁴⁺ particles were prepared by co‐precipitation and then coated by esterification of P₂O₅ with alcohols (methanol, ethanol, and isopropanol). This route was adopted to encapsulate the prepared phosphors using transition‐metal ions as cross‐linkers between the alkyl phosphate moieties. The coated phosphor particles exhibited a high water tolerance and retained approximately 87 % of their initial external quantum efficiency after aging under high‐humidity (85 %) and high‐temperature (85 °C) conditions for one month. Warm white‐light‐emitting diodes that consisted of blue InGaN chips, the prepared K₂SiF₆:Mn⁴⁺ phosphors, and either yellow Y₃Al₅O₁₂:Ce³⁺ phosphors or green β‐SiAlON: Eu²⁺ phosphors showed excellent color rendition.     

Synthesis and optical properties of novel red phosphors YNbTiO6:Eu3+ with highly enhanced brightness by Li+ doping

Highly luminescent euxenite phased YNbTiO₆:Eu³⁺ and Li⁺-doped YNbTiO₆:Eu³⁺ red phosphors have been prepared through a facile sol–gel combustion process and investigated for the first time. The introduction of Li⁺ ions into YNbTiO₆:Eu³⁺ is able to result in significant changes of the crystallinity and particle size, and bring a clear red-shift of absorption edge. A dominant red emission peak at 611 nm due to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ was observed from photoluminescence spectra of the YNbTiO₆:Eu³⁺ and Li⁺-doped YNbTiO₆:Eu³⁺ phosphors. In particular, the emission intensity of the optimal Li⁺-doped YNbTiO₆:Eu³⁺ was examined to be close to 400% of commercial Y₂O₃:Eu³⁺ phosphor. The mechanism of the enhanced emission by Li⁺ doping was discussed.     

Luminescence Tuning of Sr8MgCe(PO4)7:Eu2+,Mn2+ Phosphors: Structure Refinement,Site Occupancy,and Energy Transfer

Sr₈MgCe(PO₄)₇:Eu²⁺,Mn²⁺ phosphor with whitlockite‐type structure was prepared by a combustion‐assisted solid‐state reaction. The crystal structure and luminescence properties were investigated. Under UV radiation, Sr₈MgCe(PO₄)₇ host exhibits a violet‐blue emission band from Ce³⁺ ions. When Eu²⁺/Mn²⁺ are doped into the host, the samples excited with 270 nm UV radiation present multicolor emissions due to the energy transfer (ET) from Ce³⁺ to Eu²⁺/Mn²⁺. The emitting color of Sr₈MgCe(PO₄)₇:Eu²⁺ can be tuned from violet‐blue to yellow‐green, whereas Sr₈MgCe(PO₄)₇:Mn²⁺ can emit red light. Under excitation with long wavelength at 360 nm, Sr₈MgCe(PO₄)₇:Eu²⁺ phosphor shows a broadband emission from 390 to 700 nm, which is attributed to the 4f⁶5d¹→4f⁷ transition of Eu²⁺ without the contribution from Ce³⁺ emission. Tunable full‐color emitting light can be achieved in the Eu²⁺ and Mn²⁺‐codoped Sr₈MgCe(PO₄)₇ phosphor by ET_Eu–Mn through control of the levels of doped Eu²⁺ and Mn²⁺ ions. These results suggest that Sr₈MgCe(PO₄)₇:Eu²⁺,Mn²⁺ phosphor has potential applications in NUV chip pumped white LEDs.     

Mechanistic Insight into Energy-Transfer Dynamics and Color Tunability of Na4CaSi3O9:Tb3+,Eu3+ for Warm White LEDs

In this work, a latent energy-transfer process in traditional Eu³⁺,Tb³⁺-doped phosphors is proposed and a new class of Eu³⁺,Tb³⁺-doped Na₄CaSi₃O₉ (NCSO) phosphors is presented which is enabled by luminescence decay dynamics that optimize the electron-transfer energy process. Relative to other Eu³⁺,Tb³⁺-doped phosphors, the as-synthesized Eu³⁺,Tb³⁺-doped NCSO phosphors show improved large-scale tunable emission color from green to red upon UV excitation, controlled by the Tb³⁺/Eu³⁺ doping ratio. Detailed spectroscopic measurements in the vacuum ultraviolet (VUV)/UV/Vis region were used to determine the Eu³⁺–O²⁻ charge-transfer energy, 4f–5d transition energies, and the energies of 4f excited multiplets of Eu³⁺ and Tb³⁺ with different 4f^N electronic configurations. The Tb³⁺→Eu³⁺ energy-transfer pathway in the co-doped sample was systematically investigated, by employing luminescence decay dynamics analysis to elucidate the relevant energy-transfer mechanism in combination with the appropriate model simulation. To demonstrate their application potential, a prototype white-light-emitting diode (WLED) device was successfully fabricated by using the yellow luminescence NCSO:0.03Tb³⁺, 0.05Eu³⁺ phosphor with high thermal stability and a BaMgAl₁₀O₁₇:Eu²⁺ phosphor in combination with a near-UV chip. These findings open up a new avenue to realize and develop multifunctional high-performance phosphors by manipulating the energy-transfer process for practical applications.     

Research on Molecular Structure and Electronic Properties of Ln3+ (Ce3+, Tb3+, Pr3+)/Li+ and Eu2+ Co-Doped Sr2Si5N8 via DFT Calculation

We use density functional theory (DFT) to study the molecular structure and electronic band structure of Sr₂Si₅N₈:Eu²⁺ doped with trivalent lanthanides (Ln³⁺ = Ce³⁺, Tb³⁺, Pr³⁺). Li⁺ was used as a charge compensator for the charge imbalance caused by the partial replacement of Sr²⁺ by Ln³⁺. The doping of Ln lanthanide atom causes the structure of Sr₂Si₅N₈ lattice to shrink due to the smaller atomic radius of Ln³⁺ and Li⁺ compared to Sr²⁺. The doped structure’s formation energy indicates that the formation energy of Li⁺, which is used to compensate for the charge imbalance, is the lowest when the Sr2 site is doped. Thus, a suitable Li⁺ doping site for double-doped lanthanide ions can be provided. In Sr₂Si₅N₈:Eu²⁺, the doped Ce³⁺ can occupy partly the site of Sr₁²⁺ ([SrN₈]), while Eu²⁺ accounts for Sr₁²⁺ and Sr₂²⁺ ([SrN₁₀]). When the Pr³⁺ ion is selected as the dopant in Sr₂Si₅N₈:Eu²⁺, Pr³⁺ and Eu²⁺ would replace Sr₂²⁺ simultaneously. In this theoretical model, the replacement of Sr²⁺ by Tb³⁺ cannot exist reasonably. For the electronic structure, the energy level of Sr₂Si₅N₈:Eu²⁺/Li⁺ doped with Ce³⁺ and Pr³⁺ appears at the bottom of the conduction band or in the forbidden band, which reduces the energy bandgap of Sr₂Si₅N₈. We use DFT+U to adjust the lanthanide ion 4f energy level. The adjusted 4f-CBM of Ce_Sr1Li_Sr1-Sr₂Si₅N₈ is from 2.42 to 2.85 eV. The energy range of 4f-CBM in Pr_Sr1Li_Sr1-Sr₂Si₅N₈ is 2.75–2.99 eV and its peak is 2.90 eV; the addition of Ce³⁺ in Eu_Sr1Ce_Sr1Li_Sr1 made the 4f energy level of Eu²⁺ blue shift. The addition of Pr³⁺ in Eu_Sr2Pr_Sr2Li_Sr1 makes part of the Eu²⁺ 4f energy level blue shift. Eu²⁺ 4f energy level in Eu_Sr2Ce_Sr1Li_Sr1 is not in the forbidden band, so Eu²⁺ is not used as the emission center.     

Synthesis,Persistent Luminescence,and Thermoluminescence Properties of Yellow Sr3SiO5:Eu2+,RE3+ (RE=Ce,Nd, Dy,Ho, Er,Tm, Yb) and Orange‐Red Sr3−xBaxSiO5:Eu2+, Dy3+ Phosphor

Sunlight‐excitable orange or red persistent oxide phosphors with excellent performance are still in great need. Herein, an intense orange‐red Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ persistent luminescence phosphor was successfully developed by a two‐step design strategy. The XRD patterns, photoluminescence excitation and emission spectra, and the thermoluminescence spectra were investigated in detail. By adding non‐equivalent trivalent rare earth co‐dopants to introduce foreign trapping centers, the persistent luminescence performance of Eu²⁺ in Sr₃SiO₅ was significantly modified. The yellow persistent emission intensity of Eu²⁺ was greatly enhanced by a factor of 4.5 in Sr₃SiO₅:Eu²⁺,Nd³⁺ compared with the previously reported Sr₃SiO₅:Eu²⁺, Dy³⁺. Furthermore, Sr ions were replaced with equivalent Ba to give Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ phosphor, which shows yellow‐to‐orange‐red tunable persistent emissions from λ=570 to 591 nm as x is increased from 0 to 0.6. Additionally, the persistent emission intensity of Eu²⁺ is significantly improved by a factor of 2.7 in Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ (x=0.2) compared with Sr₃SiO₅:Eu²⁺,Dy³⁺. A possible mechanism for enhanced and tunable persistent luminescence behavior of Eu²⁺ in Sr_3?xBa_xSiO₅:Eu²⁺,RE³⁺ (RE=rare earth) is also proposed and discussed.