Tomographic-PIV measurement of the flow around a zigzag boundary layer trip

Tomographic-PIV was used to measure the boundary layer transition forced by a zigzag trip. The resulting instantaneous three-dimensional velocity distributions are used to quantitatively visualize the flow structures. They reveal undulating spanwise vortices directly behind the trip, which break up into individual arches and then develop into the hairpin-like structures typical of wall-bounded turbulence. Compared to the instantaneous flow structure, the structure of the average velocity field is very different showing streamwise vortices. Such streamwise vortices are often associated with the low-speed streaks occurring in bypass transition flows, but in this case clearly are an artifact of the averaging. Rather, the present streaks in the separated flow region directly behind the trip are resulting from the waviness in the spanwise vortices as introduced by the zigzag trip. Furthermore, these streaks and the separated flow region are observed to be related to a large-scale, spanwise uniform unsteadiness in the flow that contributes significantly to the velocity fluctuations over large downstream distances (up to at least the edge of the present measurement domain).     

Investigation of turbulence structures in a drag-reduced turbulent channel flow with surfactant additive by stereoscopic particle image velocimetry

In the present study, we employed stereoscopic particle image velocimetry (PIV) to investigate the characteristics of turbulence structures in a drag-reduced turbulent channel flow with addition of surfactant. The tested drag-reducing fluid was a CTAC/NaSal/Water (CTAC: cetyltrimethyl ammonium chloride; NaSal: sodium salicylate) system at 25°C. The weight concentration of CTAC was 30 ppm. Stereoscopic PIV measurement was performed for a water flow (Re=1.1×10⁴) and a CTAC solution flow (Re=1.5×10⁴ with 54% drag reduction) in both the streamwise–spanwise and wall-normal-spanwise planes, respectively. The three-dimensionality of hairpin vortex structures in the near-wall region for wall-bounded turbulent flow was reproduced by conditionally averaging the stereoscopic two-dimensional-three-component velocity fields. A series of wall-normal vortex cores were found to align with the near-wall low-speed streaks with opposite vorticity signals at both sides of the streaks and with the vorticity decreased on average by about one order of magnitude in CTAC solution flow compared with water flow; the spanwise spacing between the near-wall low-speed streaks in the solution flow is increased by about 46%. The streamwise vorticity of the vortex cores appearing in the wall-normal-spanwise plane was also decreased by the use of drag-reducing surfactant additives.     

Low- and high-speed structures in the outer region of an adverse-pressure-gradient turbulent boundary layer

Large- and very large-scale structures in the form of elongated regions of low and high streamwise momentum have been studied in the outer region of a turbulent boundary layer subjected to a strong adverse pressure gradient. Large sets of streamwise–spanwise instantaneous velocity fields are acquired by particle image velocimetry at three wall-normal positions (0.2δ, 0.5δ, 0.8δ) at three different streamwise locations and at 0.1δ at the last streamwise location which allows us to study the wall-normal and streamwise variations of the structures. Subsequently, a pattern-recognition method and a classification scheme are employed in order to detect, classify and characterize the structures in an efficient and rigorous manner. Like in the case of zero-pressure-gradient turbulent boundary layers, long meandering streaky regions of low and high momentum are observed in the outer region of the present flow but they appear less frequently; especially in the lower part (at 0.1δ and 0.2δ) of the large-velocity-defect zone, i.e. near detachment. The dimensions of these large structures scale on boundary-layer thickness (δ) and are generally comparable to those previously reported for such structures in the overlap region of zero-pressure-gradient turbulent boundary layers. Interestingly, the adverse pressure gradient does not significantly affect the dimensions and arrangement of the large-scale structures in the upper part (at 0.5δ and 0.8δ) a segment of the outer region where the scaled Reynolds stresses also remain fairly self-similar.     

Velocity measurements of streamwise roll cells in rotating plane Couette flow

For the first time, quantitative velocity measurements in rotating plane Couette flow are demonstrated. Particle image velocimetry is used at a low Reynolds number with anti-cyclonic, i.e. destabilising rotation, where the instability is expected to give rise to steady streamwise-oriented roll cells. The streamwise and spanwise velocities of the roll cells were measured on the centreplane of the flow and at two planes on either side. The streamwise velocity is spanwise periodic with an amplitude variation approximately ±42 % of half the velocity difference between the moving walls. The wall-normal velocity was estimated by assuming steady, laminar and streamwise-independent flow. Despite the large amplitude of the disturbance, both the spanwise wave length and amplitude ratio between the streamwise and wall-normal components were close to what is obtained from linear theory. A splitting event of a roll cell was also captured by the velocity measurements and its development followed in time.     

Experiments on localized disturbances in a flat plate boundary layer. Part 1. The receptivity and evolution of a localized free stream disturbance

The receptivity of a laminar boundary layer to free stream disturbances has been experimentally investigated through the introduction of deterministic localized disturbances upstream of a flat plate mounted in a wind tunnel. Hot-wire measurements indicate that the spanwise gradient of the normal velocity component (and hence the streamwise vorticity) plays an essential role in the transfer of disturbance energy into the boundary layer. Inside the laminar boundary layer the disturbances were found to give rise to the formation of longitudinal structures of alternating high and low streamwise velocity. Similar streaky structures exist in laminar boundary layers exposed to free stream turbulence, in which the disturbance amplitude increases in linear proportion to the displacement thickness. In the present study the perturbation amplitude of the streaks was always decaying for the initial amplitudes used, in contrast to the growing fluctuations that are observed in the presence of free stream turbulence. This points out the importance of the continuous influence from the free stream turbulence along the boundary layer edge.     

Streamwise Vortices and Velocity Streaks in a Locally Drag-Reduced Turbulent Boundary Layer

This work aims to understand the changes associated with the near-wall streaky structures in a turbulent boundary layer (TBL) where the local skin-friction drag is substantially reduced. The Reynolds number is R e _?? = 1000 based on the momentum thickness or R e _τ = 440 based on the friction velocity of the uncontrolled flow. The TBL is perturbed via a local surface oscillation produced by an array of spanwise-aligned piezo-ceramic (PZT) actuators and measurements are made in two orthogonal planes using particle image velocimetry (PIV). Data analyses are conducted using the vortex detection, streaky structure identification, spatial correlation and proper orthogonal decomposition (POD) techniques. It is found that the streaky structures are greatly modified in the near-wall region. Firstly, the near-wall streamwise vortices are increased in number and swirling strength but decreased in size, and are associated with greatly altered velocity correlations. Secondly, the velocity streaks grow in number and strength but contract in width and spacing, exhibiting a regular spatial arrangement. Other aspects of the streaky structures are also characterized; they include the spanwise gradient of the longitudinal fluctuating velocity and both streamwise and spanwise integral length scales. The POD analysis indicates that the turbulent kinetic energy of the streaky structures is reduced. When possible, our results are compared with those obtained by other control techniques such as a spanwise-wall oscillation, a spanwise oscillatory Lorentz force and a transverse traveling wave.     

Coherent Structures Formation During Wake-Boundary Layer Interaction on a LP Turbine Blade

Particle Image Velocimetry (PIV) measurements have been analyzed in order to characterize the dynamics of coherent structures (eddies and streaks) within the suction side boundary layer of a low pressure turbine cascade perturbed by impinging wakes. To this end, the instantaneous flow fields at low Reynolds number and elevated free-stream turbulence intensity level (simulating the real condition of the blade row within the engine) were investigated in two orthogonal planes (a blade-to-blade and a wall-parallel plane). Proper Orthogonal Decomposition (POD) has been employed to filter the instantaneous flow maps allowing a better visualization of the structures involved in the transition process of the boundary layer. For the unsteady case properly selected POD modes have been also used to sort the instantaneous PIV images in the wake passage period. This procedure allows computing phase-averaged data and visualizing structures size and intensity in the different parts of the boundary layer during the different wake passage phases. The contributions to the whole shear stress due to the largest spanwise oriented scales at the leading and trailing boundaries of the wake-jet structures and those associated with streaky structures observed in the bulk of the wake are discussed. Instantaneous images in the wall-parallel plane are filtered with POD and they allow us to further highlight the occurrence of low and high speed traveling streaks (Klebanoff mode). The periodic advection along the suction side of the high turbulent content regions carried by the wakes anticipates both formation and sinuous instability of the streaks inside the boundary layer as compared with the steady case. The dynamics driving the breakdown of the streaks and the consequent formation of nuclei with high wall-normal vorticity have been found to be almost the same in the steady and the unsteady cases. Auto-correlation of the instantaneous images are also presented in order to highlight analogies and differences in the size and spacing of streaks in the two cases. These results are also compared with the available literature concerning simplified geometries (i.e flat plate) operating under steady inflow.     

Observations of meandering superstructures in the roughness sublayer of a turbulent boundary layer

The existence of meandering superstructures in a turbulent boundary layer overlying irregular roughness is explored with high-frame-rate particle-image velocimetry measurements within the roughness sublayer at moderate Reynolds number. Elongated streamwise fields of view reconstructed from this data using a Taylor’s hypothesis approach revealed spanwise-meandering regions of low-streamwise-momentum fluid that extended several boundary-layer thicknesses in the streamwise direction. Such signatures are consistent with previous observations of superstructures in smooth-wall turbulence. Counter-rotating wall-normal vortex cores were found to reside along the spanwise boundaries of these superstructure patterns, consistent with the spatial characteristics of hairpin vortex packets.     

Turbulent transport dissimilarity with modulated turbulence structure in channel flow of viscoelastic fluid

This experimental study investigated the turbulent transport dissimilarity with a modulated turbulence structure in a channel flow of a viscoelastic fluid using simultaneous particle image velocimetry and planar laser-induced fluorescence measurements. An instantaneous dye concentration field with fluctuating velocity vectors showed that mass was transferred by hierarchically large-scale wavy motions with inclination. A co-spectral analysis showed that the spatial phase modulation of the streamwise velocity and dye concentration fluctuations for the wall-normal velocity fluctuation corresponded to the relaxation time. The occurrence of intense dye concentration fluctuation and small streamwise velocity fluctuation in a thin boundary layer caused dissimilar turbulent transport because of the non-zero negative correlation of the streamwise velocity and dye concentration fluctuations for the wall-normal velocity fluctuation only on large scales. This explains the turbulent transport dissimilarity which leads to the zero averaged Reynolds shear stress and non-zero wall-normal turbulent mass flux.     

Turbulence structure in non-equilibrium boundary layers with favorable and adverse pressure gradients

An experimental study was conducted to document the turbulence in boundary layers on smooth walls subject to a favorable pressure gradient followed by a zero pressure gradient recovery and an adverse pressure gradient. Two component velocity profiles were acquired along the spanwise centerline of the test section, and velocity fields were obtained at the same locations in streamwise wall-normal and streamwise–spanwise planes using PIV. The FPG was shown to reduce the turbulence in the outer part of the boundary layer, reducing the transport of this turbulence and the effect of sweeps toward the wall. This reduced the inclination angle of the large structures and increased their length scale, particularly in the streamwise and spanwise directions. Recovery from the FPG to a ZPG was rapid. The APG reduced the near wall shear, resulting in a reduced effect of ejections relative to sweeps. The APG had an opposite but smaller effect on the shape and size of structures compared to the FPG.     

Near-field measurements and development of a new boundary layer over a flat plate with localized suction

Suction on a turbulent boundary layer is applied through a narrow strip in order to understand the effects suction can have on the boundary layer development and turbulent structures in the flow. Detailed two-component laser Doppler velocimetry (LDV) and laser-induced fluorescence (LIF) based measurements have been undertaken in regions close to the suction strip and further downstream. The region close to the strip involves a flow reversal accompanied by a change in sign for the Reynolds shear stress and strong gradients in the flow variables. The mean streamwise velocity after suction remains larger than its corresponding no-suction value. Relative to the no-suction case, the velocity fluctuations first decrease with suction followed by a slow recovery which may involve a slight overshoot. LIF visualizations indicate that compared to the no-suction case, the low-speeds streaks stay closer to the wall and exhibit a smaller amount of spanwise and wall-normal oscillations with suction. The visualization results are consistent with two-point velocity correlation measurements. The streamwise and spanwise correlation measurements indicate that the structures are disrupted or removed from the boundary layer due to suction suggesting that the original boundary layer has been strongly influenced by suction. The results are explained by the development of a new inner layer that forms downstream of the suction strip.     

Transport and deposition of neutral particles in magnetohydrodynamic turbulent channel flows at low magnetic Reynolds numbers

The effect of Lorentz force on particle transport and deposition is studied by using direct numerical simulation of turbulent channel flow of electrically conducting fluids combined with discrete particle simulation of the trajectories of uncharged, spherical particles. The magnetohydrodynamic equations for fluid flows at low magnetic Reynolds numbers are adopted. The particle motion is determined by the drag, added mass, and pressure gradient forces. Results are obtained for flows with particle ensembles of various densities and diameters in the presence of streamwise, wall-normal or spanwise magnetic fields. It is found that the particle dispersion in the wall-normal and spanwise directions is decreased due to the changes of the underlying fluid turbulence by the Lorentz force, while it is increased in the streamwise direction. The particle accumulation in the near-wall region is diminished in the magnetohydrodynamic flows. In addition, the tendency of small inertia particles to concentrate preferentially in the low-speed streaks near the walls is strengthened with increasing Hartmann number. The particle transport by turbophoretic drift and turbulent diffusion is damped by the magnetic field and, consequently, particle deposition is reduced.     

Investigation of turbulence and skin friction modification in particle-laden channel flow using lattice Boltzmann method

Interaction between turbulence and particles is investigated in a channel flow. The fluid motion is calculated using direct numerical simulation (DNS) with a lattice Boltzmann (LB) method, and particles are tracked in a Lagrangian framework through the action of force imposed by the fluid. The particle diameter is smaller than the Kolmogorov length scale, and the point force is used to represent the feedback force of particles on the turbulence. The effects of particles on the turbulence and skin friction coefficient are examined with different particle inertias and mass loadings. Inertial particles suppress intensities of the spanwise and wall-normal components of velocity, and the Reynolds shear stress. It is also found that, relative to the reference particle-free flow, the overall mean skin-friction coefficient is reduced by particles. Changes of near wall turbulent structures such as longer and more regular streamwise low-speed streaks and less ejections and sweeps are the manifestation of drag reduction.     

Spatial characterization of the numerically simulated vorticity fields of a flow in a flume

The topology of large scale structures in a turbulent boundary layer is investigated numerically. Spatial characteristics of the large scale structure are presented through an original method, proper orthogonal decomposition (POD) of the three-dimensional vorticity fields. The DNS results, obtained by Tiselj et al. [23] for a fully developed turbulent flow in a flume, are used in the present work to analyze coherent structures with the proposed methodology. In contrast to the reconstruction methods that use instantaneous flow quantities, this approach utilizes the whole dataset of the numerical simulation. The analysis uses one thousand 3D vorticity fields from 50000 time steps of the simulation for the Reynolds number of 2600 (the turbulent Reynolds number Re^*=171). The computational domain is 2146×171×537 wall units and the grid resolution is 128×65×72 points (in streamwise, wall-normal and spanwise directions, respectively). Experimental results obtained by using particle image velocimetry (PIV) in a fully developed turbulent boundary layer in a flume, which were analyzed with the same statistical characterization method, are in agreement with the DNS analysis: the dominant vortical structure appears to have a longitudinal streamwise orientation, an inclination angle of about 8°, streamwise length of several hundred wall units, and a distance between the neighboring structures of about 100 wall units in the spanwise direction. PACS 47.27.Nz, 47.54+r     

Periodicity of large-scale coherence in turbulent boundary layers

This study examines the pronounced periodicity of large-scale coherent structures in turbulent boundary layers, which are of the order of the boundary layer thickness (δ) and reside in the logarithmic and wake regions. To this end, a series of multi-camera planar particle image velocimetry (PIV) measurements are conducted in a streamwise/spanwise and streamwise/wall-normal planes at a friction Reynolds number of Re_τ ≈ 2500. The experiments are configured to capture a large field-of-view with velocity fields that cover a streamwise extent in excess of 15δ. The resulting vector fields reveal large-scale streamwise and spanwise organisation instantaneously, which is often lost when only examining mean statistics. By extracting the dominant streamwise and spanwise Fourier modes of the large-scale motions, a clearer picture of these structural organisations and coherence is presented. A targeted inspection of these dominant modes reveal that these features remain coherent over a significant fraction of the boundary layer thickness in the wall-normal direction, but only a fraction of them have coherence that extends to the wall (wall-coherent). Further, the spatial extents and the population density of these wall-coherent and wall-incoherent modes are characterised, with the former conforming to the attached eddy arguments of Townsend (1976) and the subsequent attached eddy models. Collectively, through the evidence gathered here, we provide a conceptual picture of the representative large-scale structures in turbulent boundary layers, which are likely to have implications on the type of representative structures to be used in structure-based models for these flows.     

Direct numerical simulation of turbulent heat transfer over fully resolved anisotropic porous structures

Lattice Boltzmann direct numerical simulations of turbulent heat transfer over and inside anisotropic porous media are performed. This study considers turbulent plane channel flows whose bottom walls are made from the porous media at the bulk Reynolds number of 2900 with isothermal and conjugate heat transfer wall conditions. Four different porous walls are considered. They are walls with only the wall-normal permeability, with the wall-normal and spanwise permeabilities, with the wall-normal and streamwise permeabilities, and with the isotropic wall-normal, spanwise and streamwise permeabilities. The porosity of the porous walls ranges from 0.6 to 0.8. Discussions on the effects of the anisotropic permeability on turbulent thermal fields are carried out by the instantaneous flow visualizations and the statistical quantities. In particular, temperature fluctuations, turbulent and dispersion heat fluxes are examined both inside and outside the porous walls. Finally, the heat transfer performance is discussed considering the effects of the anisotropic permeability.     

The Effect of Pressure Gradient on Boundary Layer Receptivity

This paper presents numerical results for the receptivity of three laminar boundary layers with zero (ZPG), adverse (APG) and favourable (FPG) pressure gradients. Each boundary layer is subjected to a series of simple freestream waveforms which can be considered as constituent parts of either an isotropic or a non-isotropic turbulent freestream. Each freestream waveform has a single frequency in each spatial direction and is divided into two mutually perpendicular components. The first component has a zero spanwise velocity and hence lies in the streamwise normal plane whereas the second component lies in a plane which is perpendicular both to this plane and the spatial frequency vector. High boundary layer receptivities are only obtained for a minority of these waveforms and so only the resulting flow structures for these waveforms are considered in detail. The dominant flow structures are identified as either Tollmien Schlichting (T-S) waves or streaky structures. The streaky structures can be induced by both freestream components, but the response to the second component, which results in streamwise vortices in the freestream, is considerably stronger and occurs over a much larger streamwise frequency range. The boundary layer is only receptive to a relatively narrow band of spanwise wavelengths ranging from approximately one to four times the local boundary layer thickness. The APG leads to receptivities which are more than double those for the FPG case. The ratio of the freestream fluctuation streamwise wavelength to the distance from the plate leading edge is identified as an important influential parameter for receptivity leading to streaks. Significant T-S activity is only observed for APG, but is also detected for ZPG.     

Influence of local ultrasonic forcing on a turbulent boundary layer

An experimental study was carried out to investigate the effect of local ultrasonic forcing on a turbulent boundary layer. The ultrasonic forcing system was constructed by adhering six ultrasonic transducers to a flat plate over which water was flowed. In this system, the ultrasonic waves projected into the water by the transducers caused cavitation, giving rise to an enormous number of tiny water-vapor bubbles. Stereoscopic particle image velocimetry (SPIV) was used to probe the flow characteristics. The SPIV results showed that imposition of the ultrasonic forcing caused a substantial increase in the mean wall-normal velocity but a decrease in the mean streamwise velocity. The ultrasonic forcing reduced the skin friction coefficient by up to 60% immediately downstream of the transducers; this effect gradually dissipated with moving downstream. The streamwise turbulence intensity was reduced near the wall but increased away from the wall, whereas the wall-normal turbulence intensity was not much affected near the wall but increased away from the wall. The Reynolds shear stress and the production of turbulent kinetic energy were reduced near the wall. Imposition of the ultrasonic forcing shifted the streamwise vortical structures away from the wall, leading to a reduction in skin friction.     

Statistical scale of hairpin packets in the later stage of bypass transition induced by cylinder wake

The hairpin packet's structure and its statistical scale in the later stage of bypass transition induced by a cylinder wake are investigated by time-resolved particle image velocimetry from the side and top view, respectively. Linear stochastic estimation is used to achieve the conditionally averaged velocity fields. For the side view case, the conditionally averaged structure consists of a series of swirling motions located along a line inclining at a large angle (18°) from the wall and a low-speed region occupied by the cylinder wake appearing right above them. In the (x, z)-plane at the wall-normal height y/???=?0.2, the dominant structures are shown to be the large-scale regions of low momentum elongated almost over 3?? along the streamwise. The low-speed regions are consistently bordered by small-scale counter-rotating vortice pairs organized in the streamwise with a statistical spanwise width of 0.55??. The results suggest that in the later part of the transitional zone, the upward induction of the cylinder wake enhances both the wall-normal and spanwise extent of the hairpin packets.     

Numerical studies of the instability and breakdown of a boundary-layer low-speed streak

The experimental configuration in [M. Asai, M. Minagawa, M. Nishioka, The instability and breakdown of a near-wall low-speed streak, J. Fluid Mech. 455 (2002) 289–314] is numerically reproduced in order to examine the instability of a single low-speed streak in a laminar boundary layer and to investigate the resulting generation of coherent structures. Such a configuration is chosen since the experimental data show that the two instability modes, varicose and sinuous, are of comparable strength. The instability characteristics are retrieved from the simulation of the flow impulse response. The varicose instability is associated to higher frequencies and lower group velocities than those of the sinuous modes. The latter are less affected by the diffusion of the streak mean shear and are amplified for a longer streamwise distance. Analysis of the perturbation kinetic energy production reveals that both the varicose and the sinuous instability are driven by the work of the Reynolds stress against the wall-normal shear of the streak. The base flow considered here therefore presents an exception to the common knowledge, supported by several previous studies, that the sinuous instability is associated to the streak spanwise shear. The vortical structures at the late stage of the varicose breakdown are identified from the numerical data. By comparing them with those pertaining to other transition scenarios, it is confirmed that streaks and streamwise vortices are universal features of boundary layer transition.