PdNi- and Pd-coated electrodes prepared by electrodeposition from ionic liquid for nonenzymatic electrochemical determination of ethanol and glucose in alkaline media

Nonenzymatic electrochemical determination of ethanol and glucose was respectively achieved using PdNi- and Pd-coated electrodes prepared by electrodeposition from the novel metal-free ionic liquid (IL); N-butyl-N-methylpyrrolidinium dicyanamide (BMP-DCA). BMP-DCA provided an excellent environment and wide cathodic limit for electrodeposition of metals and alloys because many metal chlorides could dissolve in this IL where the reduction potentials of Pd(II) and Ni(II) indeed overlapped, leading to the convenience of potentiostatic codeposition. In aqueous solutions, the reduction potentials of Pd(II) and Ni(II) are considerably separated. The bimetallic PdNi coatings with atomic ratios of ∼80/20 showed the highest current for ethanol oxidation reaction (EOR). Ethanol was detected by either cyclic voltammetry (CV) or hydrodynamic amperometry (HA). Using CV, the dependence of EOR peak current on concentration was linear from 4.92 to 962 μM with a detection limit of 2.26 μM (σ = 3), and a linearity was observed from 4.92 to 988 μM using HA (detection limit 0.83 μM (σ = 3)). The Pd-coated electrodes prepared by electrodeposition from BMP-DCA showed electrocatalytic activity to glucose oxidation and CV, HA, and square-wave voltammetry (SWV) were employed to determine glucose. SWV showed the best sensitivity and linearity was observed from 2.86 μM to 107 μM, and from 2.99 mM to 10.88 mM with detection limits of 0.78 μM and 25.9 μM (σ = 3), respectively. For glucose detection, the interference produced from ascorbic acid, uric acid, and acetaminophen was significantly suppressed, compared with a regular Pt disk electrode.     

Electrodeposited nitrogen-doped graphene/carbon nanotubes nanocomposite as enhancer for simultaneous and sensitive voltammetric determination of caffeine and vanillin

A nitrogen-doped graphene/carbon nanotubes (NGR–NCNTs) nanocomposite was employed into the study of the electrochemical sensor via electrodeposition for the first time. The morphology and structure of NGR–NCNTs nanocomposite were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. Meanwhile, the electrochemical performance of the glassy carbon electrode (GCE) modified with electrodeposited NGR–NCNTs (ENGR–NCNTs/GCE) towards caffeine (CAF) and vanillin (VAN) determination was demonstrated by cyclic voltammetry (CV) and square wave voltammetry (SWV). Under optimal condition, ENGR–NCNTs/GCE exhibited a wide linearity of 0.06–50 μM for CAF and 0.01–10 μM for VAN with detection limits of 0.02 μM and 3.3 × 10⁻³ μM, respectively. Furthermore, the application of the proposed sensor in food products was proven to be practical and reliable. The desirable results show that the ENGR–NCNTs nanocomposite has promising potential in electrocatalytic biosensor application.     

Shape-controlled electrodeposition of silver using chitosan as structure-directing agent on disposable pencil graphite electrodes: low-cost electrocatalysts for the detection of hydrogen peroxide and hydrazine hydrate

A facile synthetic protocol for the electrodeposition of diverse morphologies of silver on disposable pencil graphite electrodes (Ag/PGE) in the presence of chitosan as structure-directing agent (SDA) is reported. The influence of various electrodeposition parameters on the morphology of Ag deposited has been studied and interpreted using electron microscopic techniques. Several impressive morphologies such as hexahedron, leaf and dendrites have been observed for Ag/PGE with respect to change in experimental conditions. Furthermore, the crucial role of chitosan in determining the morphology of Ag/PGE has been elucidated with the help of three-dimensional Scharifker-Hills nucleation and growth model. The electrocatalytic activities of various Ag/PGEs towards the reduction of hydrogen peroxide (HP) and oxidation of hydrazine hydrate (HH) have been studied in detail with the help of diverse electrochemical techniques. In comparison with PGE, the Ag hexahedron- (Ag-Hex/PGE) and Ag dendrite- (Ag-Dend/PGE) modified PGEs exhibited excellent electrocatalytic activity towards HP and HH, respectively. The Ag-Hex/PGE displayed a wide linear range of 0.1–20,000 μM with a limit of detection (LOD, 3σ/m) of 0.06 μM for HP reduction. On the other hand, a linear range of 25–20,000 μM with LOD of 1.8 μM for HH oxidation has been observed for Ag-Dend/PGE. Furthermore, the modified Ag/PGEs revealed remarkable reproducibility and long-term storage stability. The practical applicability of the Ag-Hex/PGE and Ag-Dend/PGE was demonstrated through the electrocatalytic detection of HP in milk and HH in tap water samples with satisfactory recovery results.

     

Graphene-polyaniline modified electrochemical droplet-based microfluidic sensor for high-throughput determination of 4-aminophenol

We report herein the first development of graphene-polyaniline modified carbon paste electrode (G-PANI/CPE) coupled with droplet-based microfluidic sensor for high-throughput detection of 4-aminophenol (4-AP) in pharmaceutical paracetamol (PA) formulations. A simple T-junction microfluidic platform using an oil flow rate of 1.8 μL/min and an aqueous flow rate of 0.8 μL/min was used to produce aqueous testing microdroplets continuously. The microchannel was designed to extend the aqueous droplet to cover all 3 electrodes, allowing for electrochemical measurements in a single droplet. Parameters including flow rate, water fraction, and applied detection potential (E_det) were investigated to obtain optimal conditions. Using G-PANI/CPE significantly increased the current response for both cyclic voltammetric detections of ferri/ferrocyanide [Fe(CN)₆]^3−/4− (10 times) and 4-AP (2 times), compared to an unmodified electrode. Using the optimized conditions in the droplet system, 4-AP in the presence of PA was selectively determined. The linear range of 4-AP was 50–500 μM (R² = 0.99), limit of detection (LOD, S/N = 3) was 15.68 μM, and limit of quantification (LOQ, S/N = 10) was 52.28 μM. Finally, the system was used to determine 4-AP spiked in commercial PA liquid samples and the amounts of 4-AP were found in good agreement with those obtained from the conventional capillary zone electrophoresis/UV–Visible spectrophotometry (CZE/UV–Vis). The proposed microfluidic device could be employed for a high-throughput screening (at least 60 samples h⁻¹) of pharmaceutical purity requiring low sample and reagent consumption.     

Sensor for traces of hydrogen peroxide using an electrode modified by multiwalled carbon nanotubes, a gold-chitosan colloid, and Prussian blue

An electrochemical sensor for trace levels of hydrogen peroxide (HP) was fabricated by the self-assembly of multi-walled carbon nanotubes, a gold-chitosan colloid, followed by electrodeposition of Prussian blue. The electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy and other methods. The electrode shows well-defined peaks at 101 mV and 193 mV, the reduction current is linearly related to the concentration of HP in the range from 4.0 to and 19.6 μM. The detection limit of 3.36 μM (at an S/N of 3).     

Single-walled carbon nanotube-arrayed microelectrode chip for electrochemical analysis

The development of a single-walled carbon nanotube (SWCNT)-arrayed microelectrode chip is reported here. SWCNT-arrayed electrodes were formed directly on Pt surfaces, and were also arrayed on the chip. The electrochemical characteristics of the devices were investigated using potassium ferricyanide, K₃[Fe(CN)₆] in connection with cyclic voltammetry (CV). The electrochemical signals of electro-active amino acids; L-Tyrosine (Tyr), L-Cysteine (Cys) and L-Tryptophan (Trp) were detected using differential pulse voltammetry (DPV). The chip operated at a lower oxidation potential (vs. Ag/AgCl) compared with conventional carbon and Pt disc electrodes in 50 mM phosphate buffer solution (PBS, pH 7.4). The linear response was observed between 0.1–1 μM and 100 μM for the amino acids with correlation coefficients higher than 0.99. The electrochemical measurements of K₃[Fe(CN)₆] and amino acids revealed that the peak current intensities using SWCNT-arrayed electrodes were about 100-fold higher than those using bare Pt-arrayed microelectrodes. Additionally, the surface area dependence of the peak current responses was plotted. We concluded that our chips with SWCNT-arrayed microelectrodes provided a promising platform for electrochemical applications.     

Immobilization of Ni–Pd/core–shell nanoparticles through thermal polymerization of acrylamide on glassy carbon electrode for highly stable and sensitive glutamate detection

The preparation of a persistently stable and sensitive biosensor is highly important for practical applications. To improve the stability and sensitivity of glutamate sensors, an electrode modified with glutamate dehydrogenase (GDH)/Ni–Pd/core–shell nanoparticles was developed using the thermal polymerization of acrylamide (AM) to immobilize the synthesized Ni–Pd/core–shell nanoparticles onto a glassy carbon electrode (GCE). The modified electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). Electrochemical data showed that the prepared biosensor had remarkably enhanced electrocatalytic activity toward glutamate. Moreover, superior reproducibility and excellent stability were observed (relative average deviation was 2.96% after continuous use of the same sensor for 60 times, and current responses remained at 94.85% of the initial value after 60 d). The sensor also demonstrated highly sensitive amperometric detection of glutamate with a low limit of detection (0.052 μM, S/N = 3), high sensitivity (4.768 μA μM⁻¹ cm⁻²), and a wide, useful linear range (0.1–500 μM). No interference from potential interfering species such as l-cysteine, ascorbic acid, and l-aspartate were noted. The determination of glutamate levels in actual samples achieved good recovery percentages.     

Modification of polypyrrole nanowires array with platinum nanoparticles and glucose oxidase for fabrication of a novel glucose biosensor

A novel glucose biosensor, based on the modification of well-aligned polypyrrole nanowires array (PPyNWA) with Pt nanoparticles (PtNPs) and subsequent surface adsorption of glucose oxidase (GOx), is described. The distinct differences in the electrochemical properties of PPyNWA–GOx, PPyNWA–PtNPs, and PPyNWA–PtNPs–GOx electrodes were revealed by cyclic voltammetry. In particular, the results obtained for PPyNWA–PtNPs–GOx biosensor showed evidence of direct electron transfer due mainly to modification with PtNPs. Optimum fabrication of the PPyNWA–PtNPs–GOx biosensor for both potentiometric and amperometric detection of glucose were achieved with 0.2 M pyrrole, applied current density of 0.1 mA cm⁻², polymerization time of 600 s, cyclic deposition of PtNPs from −200 mV to 200 mV, scan rate of 50 mV s⁻¹, and 20 cycles. A sensitivity of 40.5 mV/decade and a linear range of 10 μM to 1000 μM (R² = 0.9936) were achieved for potentiometric detection, while for amperometric detection a sensitivity of 34.7 μA cm⁻² mM⁻¹ at an applied potential of 700 mV and a linear range of 0.1–9 mM (R² = 0.9977) were achieved. In terms of achievable detection limit, potentiometric detection achieved 5.6 μM of glucose, while amperometric detection achieved 27.7 μM.     

Exploiting multi-function Metal-Organic Framework nanocomposite Ag@Zn-TSA as highly efficient immobilization matrixes for sensitive electrochemical biosensing

A novel multi-function Metal-Organic Framework composite Ag@Zn-TSA (zinc thiosalicylate, Zn(C₇H₄O₂S), Zn-TSA) was synthesized as highly efficient immobilization matrixes of myoglobin (Mb)/glucose oxidase (GOx) for electrochemical biosensing. The electrochemical biosensors based on Ag@Zn-TSA composite and ionic liquid (IL) modified carbon paste electrode (CPE) were fabricated successfully. Furthermore, the properties of the sensors were discussed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and amperometric current-time curve, respectively. The results showed the proposed biosensors had wide linear response to hydrogen peroxide (H₂O₂) in the range of 0.3–20,000 μM, to nitrite (NO₂⁻) for 1.3 μM–1660 μM and 2262 μM–1,33,000 μM, to glucose for 2.0–1022 μM, with a low detection limit of 0.08 μM for H₂O₂, 0.5 μM for NO₂⁻, 0.8 μM for glucose. The values of the apparent heterogeneous electron transfer rate constant (k_s) for Mb and GOx were estimated as 2.05 s⁻¹ and 2.45 s⁻¹, respectively. Thus, Ag@Zn-TSA was a kind of ideal material as highly efficient immobilization matrixes for sensitive electrochemical biosensing. In addition, this work indicated that MOF nanocomposite had a great potential for constructing wide range of sensing interface.     

Facile hydrothermal growth graphene/ZnO nanocomposite for development of enhanced biosensor

Graphene/zinc oxide nanocomposite was synthesised via a facile, green and efficient approach consisted of novel liquid phase exfoliation and solvothermal growth for sensing application. Highly pristine graphene was synthesised through mild sonication treatment of graphite in a mixture of ethanol and water at an optimum ratio. The X-ray diffractometry (XRD) affirmed the hydrothermal growth of pure zinc oxide nanoparticles from zinc nitrate hexahydrate precursor. The as-prepared graphene/zinc oxide (G/ZnO) nanocomposite was characterised comprehensively to evaluate its morphology, crystallinity, composition and purity. All results clearly indicate that zinc oxide particles were homogenously distributed on graphene sheets, without any severe aggregation. The electrochemical performance of graphene/zinc oxide nanocomposite-modified screen-printed carbon electrode (SPCE) was evaluated using cyclic voltammetry (CV) and amperometry analysis. The resulting electrode exhibited excellent electrocatalytic activity towards the reduction of hydrogen peroxide (H₂O₂) in a linear range of 1–15 mM with a correlation coefficient of 0.9977. The sensitivity of the graphene/zinc oxide nanocomposite-modified hydrogen peroxide sensor was 3.2580 μAmM⁻¹ with a limit of detection of 7.4357 μM. An electrochemical DNA sensor platform was then fabricated for the detection of Avian Influenza H5 gene based on graphene/zinc oxide nanocomposite. The results obtained from amperometry study indicate that the graphene/zinc oxide nanocomposite-enhanced electrochemical DNA biosensor is significantly more sensitive (P < 0.05) and efficient than the conventional agarose gel electrophoresis.     

Electrodeposited silver nanodendrites electrode with strongly enhanced electrocatalytic activity

Highly uniform dendritic silver nanostructures as a new electrode material, have been synthesized by electrodeposition on the glassy carbon (GC) electrode with assistance of polyethylene glycol 400 (PEG-400) as a soft template, to achieve a superior electrocatalyst with enhanced detection sensitivity in electroanalysis compared to conventional bulk Ag electrodes. The effects of the growth conditions such as concentrations of the reagents and applied potentials on the morphology and structure of as-prepared tree-like nanostructures have also been investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD). In the silver nanodendrites (AgNDs), the diameter of the trunk is around 100-200 nm with length up to 10-40 μm, and the length of its branches can reach 10 μm. In addition, the electrocatalytic behavior of this modified electrode was exploited as a sensitive detection system for the reduction of RDX high explosive, hydrogen peroxide and hexacyanoferrate (HCF) by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. Also, the obtained results were compared to multiwalled carbon nanotubes (MWCNTs) and bulk silver electrodes. These studies show that the nanodendritic silvers significantly increase the electron-transfer rate of the electrochemical reactions by as much as 1-2 orders of magnitude.     

Prussian blue modified glassy carbon electrodes-study on operational stability and its application as a sucrose biosensor

Stabilisation of electrochemically deposited Prussian blue (PB) films on glassy carbon (GC) electrodes has been investigated and an enhancement in the stability of the PB films is reported if the electrodes are treated with tetrabutylammonium toluene-4-sulfonate (TTS) in the electrochemical activation step following the electrodeposition. A multi-enzyme PB based biosensor for sucrose detection was made in order to demonstrate that PB films can be coupled with an oxidase system. A tri-enzyme system, comprising glucose oxidase, mutarotase and invertase, was crosslinked with glutaraldehyde and bovine albumin serum on the PB modified glassy carbon electrode. The deposited PB operated as an electrocatalyst for electrochemical reduction of hydrogen peroxide, the final product of the enzyme reaction sequence. The electrochemical response was studied using flow injection analysis for the determination of sucrose, glucose and H₂O₂. The optimal concentrations of the immobilisation mixture was standardised as 8 U of glucose oxidase, 8 U of mutarotase, 16 U of invertase, 0.5% glutaraldehyde (0.025 μl) and 0.5% BSA (0.025 mg) in a final volume of 5 μl applied at the electrode surface (0.066 cm²). The biosensor exhibited a linear response for sucrose (4-800 μM), glucose (2-800 μM) and H₂O₂ (1-800 μM) and the detection limit was 4.5, 1.5 and 0.5 μM for sucrose, glucose and H₂O₂, respectively. The sample throughput was ca. 60 samples h⁻¹. An increase in the operational and storage stability of the sucrose biosensor was also noted when the PB modified electrodes were conditioned in phosphate buffer containing 0.05 M TTS during the preparation of the PB films.     

On-chip multi-electrochemical sensor array platform for simultaneous screening of nitric oxide and peroxynitrite

In this work we report on the design, microfabrication and analytical performances of a new electrochemical sensor array (ESA) which allows for the first time the simultaneous amperometric detection of nitric oxide (NO) and peroxynitrite (ONOO(-)), two biologically relevant molecules. The on-chip device includes individually addressable sets of gold ultramicroelectrodes (UMEs) of 50 μm diameter, Ag/AgCl reference electrode and gold counter electrode. The electrodes are separated into two groups; each has one reference electrode, one counter electrode and 110 UMEs specifically tailored to detect a specific analyte. The ESA is incorporated on a custom interface with a cell culture well and spring contact pins that can be easily interconnected to an external multichannel potentiostat. Each UME of the network dedicated to the detection of NO is electrochemically modified by electrodepositing thin layers of poly(eugenol) and poly(phenol). The detection of NO is performed amperometrically at 0.8 V vs. Ag/AgCl in phosphate buffer solution (PBS, pH = 7.4) and other buffers adapted to biological cell culture, using a NO-donor. The network of UMEs dedicated to the detection of ONOO(-) is used without further chemical modification of the surface and the uncoated gold electrodes operate at -0.1 V vs. Ag/AgCl to detect the reduction of ONOOH in PBS. The selectivity issue of both sensors against major biologically relevant interfering analytes is examined. Simultaneous detection of NO and ONOO(-) in PBS is also achieved.     

Electrospun Pd nanoparticles loaded on Vulcan carbon/ conductive polymeric ionic liquid nanofibers for selective and sensitive determination of tramadol

In the present work a sensitive and selective electrochemical sensor was fabricated based on a glassy carbon electrode which has been modified with Pd nanoparticles loaded on Vulcan carbon/conductive polymeric ionic liquid composite nanofibers. The nanostructures were characterized by UV–Vis, FT-IR, FESEM, EDX and XRD techniques. The electrochemical study of the modified electrode, as well as its efficiency for the electrooxidation of tramadol was described in 0.1 M phosphate buffered solution (PBS) (pH 7.0) using cyclic voltammetry, linear sweep voltammetry, chronoamperometry and square wave voltammetry as diagnostic techniques. It has been found that application of the composite nanofibers result in a sensitivity enhancement and a considerable decrease in the anodic overpotential, leading to negative shifts about 200 mV in peak potential. The results exhibit a linear dynamic range from 0.05 μM to 200 μM and a detection limit of 0.015 μM for tramadol. Finally, the modified electrode was used for the determination of tramadol in pharmaceutical and biological samples.     

Total phenol analysis of weakly supported water using a laccase-based microband biosensor

The monitoring of phenolic compounds in wastewaters in a simple manner is of great importance for environmental control. Here, a novel screen printed laccase-based microband array for in situ, total phenol estimation in wastewaters and for water quality monitoring without additional sample pre-treatment is presented. Numerical simulations using the finite element method were utilized for the characterization of micro-scale graphite electrodes. Anodization followed by covalent modification was used for the electrode functionalization with laccase. The functionalization efficiency and the electrochemical performance in direct and catechol-mediated oxygen reduction were studied at the microband laccase electrodes and compared with macro-scale electrode structures. The reduction of the dimensions of the enzyme biosensor, when used under optimized conditions, led to a significant improvement in its analytical characteristics. The elaborated microsensor showed fast responses towards catechol additions to tap water – a weakly supported medium – characterized by a linear range from 0.2 to 10 μM, a sensitivity of 1.35 ± 0.4 A M⁻¹ cm⁻² and a dynamic range up to 43 μM. This enhanced laccase-based microsensor was used for water quality monitoring and its performance for total phenol analysis of wastewater samples from different stages of the cleaning process was compared to a standard method.     

Colorimetric detection of hydrogen peroxide and lactate based on the etching of the carbon based Au-Ag bimetallic nanocomposite synthesized by carbon dots as the reductant and stabilizer

In this report, carbon-based gold core silver shell Au-Ag bimetallic nanocomposite (Au-Ag/C NC) was synthesized using carbon dots (C-dots) as the reductant and stabilizer by a facile green sequential reduction approach. The structure and morphology of the nanocomposite are characterized by ultraviolet–visible spectroscopy (UV–Vis), Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). The as synthesized Au-Ag/C NC exhibits good optic response toward hydrogen peroxide (H₂O₂) without adding any other chromogenic agents. The characteristic surface plasmon resonance (SPR) absorbance peak of Au-Ag/C NC declined and red-shifted with the solution color changing from reddish orange to light pink when adding H₂O₂ owing to the etching effect of H₂O₂ towards Ag. Thus, a simple colorimetric and UV strategy for sensitive detection of H₂O₂ is proposed. It provides the wide linear range for detection of H₂O₂ from 0.8–90 μM and 90–500 μM, and the detection limit was as low as 0.3 μM (S/N = 3). In addition, this colorimetric strategy can also be applied to directly distinguish and detect of lactate by naked eye and UV–Vis. The linear range of colorimetric sensing towards lactate was 0.1–22 μM and 22–220 μM, which was successfully applied in the analysis of lactate in human serum.     

Electroactivity of nitriles on platinum electrodes and its use in chromatographic detection

Acetonitrile yields two oxidative peaks, first at ca. +0.30 and second at ca. +1.15 V vs. Ag/AgCl in cyclic voltammetry with platinum electrodes in 0.10 M methanesulfonic acid (MSA) containing 0.05–5 mM concentrations of acetonitrile. This electroactivity of the nitrile group was used for a direct detection of nitriles after their chromatographic separation. Three organic nitriles (acetonitrile, propionitrile and butanenitrile) were separated with an IonPac ICE-AS 1 column, eluted with 0.10 M MSA and detected on a platinum electrode via pulsed amperometric detection. Analytical performance was evaluated with a three potential waveform (+0.30 V, +1.15 V, −0.30 V vs. Ag/AgCl, current integration at +1.15 V). Numerical values of detection limits, linearity of calibration and reproducibility are reported for all three organic nitriles.     

Surface interrogation mode of scanning electrochemical microscopy for oxidation study of adsorbed CO generated from serine on platinum

We report a new method for detection and oxidation of adsorbed carbon monoxide(CO_（ads）) generated from serine on a polycrystalline platinum ultramicroelectrode（UME） by bromine（Br₂） using in situ surface interrogation（SI） mode of scanning electrochemical microscopy（SECM）.In the SI mode,tip and substrate are both Pt UMEs,and CO_（ads） on Pt substrate,generated from serine,can be oxidized by the tip-generated Br₂ giving a positive response.Dosing CO_（ads） from serine instead of purging CO gas expands the newly introduced reaction of Br₂ with CO_（ads） and further enhances the hope to get rid of CO_（ads） on Pt for fuel cells.     

One-step preparation of silver nanoparticle embedded amorphous carbon for nonenzymatic hydrogen peroxide sensing

Herein, we report a rapid and facile fabrication of Ag/C hybrid by anchoring Ag nanoparticles in amorphous carbon network for application in amperometric sensing of hydrogen peroxide. Ag/C hybrid was prepared by simply mixing silver nitrate aqueous solution with ethylene glycol and diphosphorus pentoxide in one step at room temperature. The embedding of Ag nanoparticles into the amorphous carbon support can greatly strengthen the stability of Ag nanoparticles, protecting them from oxidizing without loss of conductivity. The nanocomposite was investigated by transmission electron microscopy, energy dispersive X-ray analysis, X-ray diffraction technique, X-ray photoelectron spectroscopy and electrochemical measurements. The prepared Ag/C hybrid was fabricated onto the surface of glassy carbon electrode to investigate the sensing property towards hydrogen peroxide. The fabricated electrochemical sensor can determine hydrogen peroxide with a detection limit of 0.1 μM and up to 5.5 mM.     

Highly sensitive electrochemical determination of Sunset Yellow based on gold nanoparticles/graphene electrode

An electrochemical sensor was prepared using Au nanoparticles and reduced graphene successfully decorated on the glassy carbon electrode (Au/RGO/GCE) through an electrochemical method which was applied to detect Sunset Yellow (SY). The as-prepared electrode was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and electrochemical measurements. The results of cyclic voltammetry (CV) proved that Au/RGO/GCE had the highest catalytic activity for the oxidation of SY as compared with GCE, Au/GCE, and RGO/GCE. Differential pulse voltammetry (DPV) showed that the linear calibration curves for SY on Au/RGO/GCE in the range of 0.002 μM–109.14 μM, and the detection limit was estimated to be 2 nM (S/N = 3). These results suggested that the obtained Au/RGO/GCE was applied to detect SY with high sensitivity, low detection limit and good stability, which provided a promising future for the development of portable sensor in food additives.