A ratiometric fluorescent chemodosimeter for Cu(II) in water with high selectivity and sensitivity

Coumarin derivative 1 was synthesized as an efficient ratiometric chemodosimeter for the detection of Cu(II) in 99% water/DMSO (v/v) at pH 7.0. Mechanism studies suggested that 1 formed a complex with Cu(II) at 2:1 ratio accompanied by quenching of green fluorescence at 524 nm; when the solution was heated to 50 °C for 30 min, Cu(II)-promoted hydrolysis of coumarin lactone moiety of 1 occurred with bright blue fluorescence at 451 nm emerged. With fluorescence intensity ratio detection at 451 nm and 524 nm, 1 features an excellent sensitivity with the detection limit of 15 nmol L⁻¹ toward Cu(II) and a good selectivity over other metal ions.     

Doubly activated coumarin as a colorimetric and fluorescent chemodosimeter for cyanide

A new α,β-unsaturated nitro group and coumarin conjugate-based fluorescent chemodosimeter 1 was developed for the selective detection of cyanide anions. The chemodosimeter has shown a selective and sensitive response to cyanide anions over other various anions through a nucleophilic aromatic substitution reaction of the cyanide to 1. When cyanide anions were added, the enhanced fluorescence intensity as well as the color changes of 1 was observed so that micromolar concentrations of cyanides were detectable by the naked eye.     

A coumarin based chemodosimetric probe for ratiometric detection of hydrazine

A coumarin-based sensor containing trifluoroacetyl acetonate moiety was designed, synthesized, and applied for hydrazine detection. Hydrazinolysis of the chemodosimeter results in a prominent chromogenic and fluorescence ratiometric response toward hydrazine within 3 min. The probe is highly selective toward hydrazine over other important amines and other biologically and environmentally abundant analytes. The limit of detection (LOD) of the probe is in 10⁻⁶ M range. The sensing mechanism was supported by NMR and HRMS analysis. The experimentally observed change in structure and electronic properties of the sensor after reaction with hydrazine was modeled by Density Functional Theory (DFT) and Time Dependent Density Functional Theory (TDDFT) computational calculations, respectively.     

Development of a new fluorescence ratiometric switch for endogenous hypochlorite detection in monocytes of diabetic subjects by dye release method

Increased oxidative stress in metabolic complications like type 2 diabetes, dyslipidemia and cardiovascular disorders exerts potential health hazards in many facets. Enhanced production of reactive oxygen species (ROS) due to increased oxidative stress promotes the damage of many biologically important macromolecules. Hypochlorous acid (HOCl), a microbicidal agent is also known to be an important ROS sub-species. An enhanced generation of endogenous HOCl due to diseased condition therefore can be detrimental to health. In present work, a new quinoline-diaminomaleonitrile based probe (HQMN) has been designed for the selective detection of hypochlorite. The probe in hand shows a selective ratiometric emission change towards OCl^?. The probe behaves as a highly selective and sensitive tool for the detection of OCl^? over other analytes with a fast response time (within 100 s). Bioimaging study revealed that HQMN can detect endogenous OCl^? in human monocytes and an increase in endogenous HOCl concentration has been witnessed in diabetic condition compared to healthy control. Thus HQMN can be used as an excellent fluorescent probe for dynamic tracking of hypochorite in living biological cells especially to identify diabetic conditions.     

Highly selective sensing of cyanide by a benzochromene-based ratiometric fluorescence probe

Enone-functionalized benzochromene chemodosimeter (1) was prepared through the Baylis-Hillman condensation reaction and was utilized as a ratiometric fluorescence probe for cyanide anions in aqueous buffer. The probe has shown a selective and sensitive response to cyanides over other various anions through the Michael addition and a subsequent [1,3]-sigmatropic rearrangement reaction. When cyanide anions were added, a prominent ratiometric fluorescence change of 1 was observed thus allowing to detect the micromolar concentration of cyanides by the naked eye.     

Coumarinyl aldehyde as a Michael acceptor type of colorimetric and fluorescent probe for cyanide in water

A simple aldehyde-functionalized coumarin (1) was utilized as a doubly activated Michael acceptor type of chemodosimeter for cyanide in water. The probe has shown a selective and sensitive response to the cyanide anion over other various anions through the Michael addition reaction of the cyanide to 1. When cyanide anions were added, the prominent color changes as well as fluorescence changes of 1 were observed so that millimolar concentrations of cyanides were detectable by the naked eye.     

A new strategy for utilizing activated CH-group to construct a FRET platform for ratiometric sensing of cyanides

A fluorescent and colorimetric cyanide sensor (4-Br) based on the activated C-H group to conscruct a FRET platform has been described for the first time, along with demonstration of selective and reversible detection of cyanides through it. The sensing mechanism of 4-Br is an integration of ICT and FRET mechanisms, based on the deprotonation of the activated C-H group. Importantly, it is suitable for fluorescence imaging of cyanides in living cell.     

A highly selective and synthetically facile aqueous-phase cyanide probe

Disperse Orange 3 (4-(4-nitrophenylazo)aniline)-based chemosensor 1 has been prepared. This structurally simple receptor displays great selectivity for the cyanide anion over other common inorganic anions in aqueous environment and can detect cyanide in water sample at micromolar concentrations.     

Biosourced 3-formyl chromenyl-azo dye as Michael acceptor type of chemodosimeter for cyanide in aqueous environment

A simple water-soluble aldehyde functionalized chromone 5 was utilized as a doubly activated Michael acceptor type of chemodosimeter for cyanide in water. The water solubility of the probe 5 is due to the incorporation of two glycerol units on the starting prepared chemodosimeter. This sensory system is able to selectively distinguish cyanide among fluoride and many other anions at micromolar concentrations and instantly detect cyanide in water at ambient temperatures with a detection limit down to 1.0 mM. Thus, the chemodosimeter 5 was applied to the quantitative determination of cyanide anion in drinking water sample (drinking water from commence).     

A fluorescein-based fluorogenic and chromogenic chemodosimeter for the sensitive detection of sulfide anion in aqueous solution

A highly sensitive chromo- and fluorogenic chemodosimeter for sulfide anion was developed based on its nucleophilicity. 2,4-Dinitrobenzenesulfonyl-fluorescein (I) is a weakly fluorescent compound. Upon mixing with sulfide anion in aqueous acetone solution, the 2,4-dinitrobenzenesulfonyl group of I was efficiently removed and highly fluorescent fluorescein was released, hence leading to the dramatic increases in both fluorescence and absorbance of the reaction solution. The fluorescence increment is linear with sulfide anion concentration in the range 50-1000 nmol L⁻¹ with a detection limit of 4.3 nmol L⁻¹ (3σ). The proposed chemodosimeter showed excellent selectivity toward sulfide anion and was successfully applied to the determination of sulfide anion in synthetic wastewater samples.     

A selective quinoline-derived fluorescent chemodosimeter to detect cyanide in aqueous medium

A simple quinoline derived probe 3 has been described. Probe 3 having aldehyde function upon interaction with cyanide undergo nucleophilic addition reaction to form cyanohydrin derivative 4 in which fluorescence intensity enhances significantly, ‘turn-on’ by photoinduced electron transfer (PET) OFF–ON mechanism. The color of probe solution switched-on to fluorescent blue which is visible to the naked-eye. Job’s plot analysis revealed a 1:1 stoichiometry for an interaction between 3 and cyanide along with detection limit 0.058 μM (1.5 ppb). The mode of interaction to detect cyanide in aqueous medium through a reaction based chemodosimeter approach has been confirmed by NMR, mass, FTIR, and DFT data analysis.     

Cu nanoclusters-based ratiometric fluorescence probe for ratiometric and visualization detection of copper ions

Copper is a highly toxic environmental pollutant with bioaccumulative properties. Therefore, sensitive detection of Cu²⁺ is very important to prevent over-ingestion, and visual detection is preferred for practical applications. In this work, we developed a simple and environmental friendly approach to synthesize hyperbranched polyethyleneimine-protected copper nanoclusters (hPEI-Cu NCs) with great stability against extreme pH, high ionic strength, thiols etching and light illumination, which were then conjugated to the surface of silica coated CdSe quantum dots (QDs) to design a ratiometric fluorescence probe. In the presence of different amounts of Cu²⁺ ions, the fluorescence of Cu NCs can be drastically quenched, while the emission from QDs stayed constant to serve as a reference signal and the color of the probe changed from yellow-green to red, resulting in ratiometric and visualization detection of Cu²⁺ ion with high accuracy. The detection limit for Cu²⁺ was estimated to be 8.9 nM, much lower than the allowable level of Cu²⁺ in drinking water (∼20 μM) set by U.S. Environmental Protection Agency. Additionally, this probe can be also applied for the determination of Cu²⁺ ion in complex real water samples.     

A highly sensitive fluorogenic chemodosimeter for rapid visual detection of phosgene

A highly sensitive chemodosimeter was identified from a panel of rhodamine derivatives for rapid and visual detection of phosgene with a detection limit of 50 nM triphosgene. Visual detection of gaseous phosgene with chemodosimeter absorbed paper strips was demonstrated.     

Colorimetric and ratiometric fluorescent detection of bisulfite by a new HBT-hemicyanine hybrid

A novel HBT-hemicyanine hybrid was prepared. This hybrid not only displays a large red-shifted (Δλ = 125 nm) emission compared to the well known ESIPT dye HBT, but also can be used as a new probe for rapid, colorimetric and ratiometric fluorescent detection of bisulfite with high selectivity and sensitivity in aqueous solution. The detection limit of this probe for HSO₃⁻ was calculated to be about 56 nM with a linear range of 0–25 μM. The potential application of this probe was exampled by detection of bisulfite in real food samples and living cells. Overall, this work not only provided a new ratiometric sensing platform, but also provided a new promising colorimetric and ratiometric fluorescent probe for bisulfite.     

A rapid responsive and highly selective probe for cyanide in the aqueous environment

A colorimetric and fluorescent cyanide probe based on 7-(trifluoroacetamino)coumarin has been prepared. This structurally simple probe displays rapid response and high selectivity for cyanide over other common anions in the aqueous solution. The sensing of cyanide was performed via the nucleophilic attack of cyanide anion to carbonyl of the probe with a 1:1 binding stoichiometry, which could be confirmed by Job’s plot, ¹H NMR, and MS studies. DFT/TDDFT calculations support that the fluorescence enhancement of the probe is mainly due to the ICT process improvement. The detection limit of the fluorescent assay for cyanide is as low as 0.3 μM in a rapid response of less than 30 s. Thus, the present probe should be applicable as a practical system for the monitoring of cyanide concentrations in aqueous samples.     

A new colorimetric chemodosimeter for Hg2+ based on charge-transfer compound of N-methylpyrrole with TCNQ

Reaction of N-methylpyrrole and 7,7,8,8-tetracyanoquinodimethane (TCNQ) furnishes an intense blue unsymmetrical charge-transfer compound through regioselective attachment of tricyanoquinodimethane at the 2-position of N-methylpyrrole which was found to be selective chemodosimeter for Hg²⁺ ions in CH₃CN:H₂O mixture (1:1 v/v, pH = 7.0, 0.01 M HEPES, 0.15 M NaCl) as well as in the solid state when supported on silica, over a variety of metal ions. A plausible mechanism for the sensing process has been proposed and supported through the characterization of the resulting Hg²⁺ complex and the density functional theory (DFT) studies.     

A boronate-based ratiometric fluorescent probe for fast selective detection of peroxynitrite

Given that peroxynitrite (ONOO^?) is profoundly associated with health and diseases, a new fluorescent probe ABT was designed and synthesized for detection of ONOO^?. ABT manifested not only ratiometric fluorescence signals simultaneously in response to concentrations of ONOO^? (within 10?s), but high selectivity and sensitivity towards ONOO^? over other physiological relevant species (detection limit?=?26.3?nM). Moreover, ABT worked in a broad pH range with biological relevance. Thus, ABT could be used to quantitative detection of ONOO^? concentration and has the potential to efficiently monitor ONOO^? in living organisms.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.