甲基叔丁基醚装置未反应C4组分中微量含氧化合物的测定

对几种高分子聚合物色谱固定相分离性能进行比较研究,选择了一种较好的混合固定相,适用于甲基叔丁基醚装置未反应碳四（C4）组分中微量二甲醚、甲醇、甲基叔丁基醚、叔丁醇等含氧化合物的气相色谱测定.以内标法进行计算.检测下限可达到10×10-6（W/W）,其它化合物不干扰测定.     

A Review of Ionic Liquids in Chromatographic and Electromigration Techniques

Although there have been numerous studies on the use of ionic liquids (IL) as solvents for synthesis and catalysis, there are many potential new fields for their application. The number of studies dealing with the use of ILs as additives to the mobile phase in LC and CZE and as a stationary phases in GC is constantly increasing. The main goal of the present paper is to gather together studies concerning the use of ILs in chromatographic techniques. The application of these substances as stationary phases, mobile phase additives and electroosmotic flow modifiers is discussed. Conversely, the application of separation methods in the analysis of ILs is also the subject of this review.     

Sensitive determination of verticine and verticinone in Bulbus Fritillariae by ionic liquid assisted capillary electrophoresis-electrochemiluminescence system

CE/Ru(bpy)₃²⁺ electrochemiluminescence (ECL) system with the assistance of ionic liquids (ILs) was successfully established for sensitive determination of verticine and verticinone in Bulbus Fritillariae for the first time. Migration behavior of alkaloid largely relies on the hydrogen bonding interactions between alkyl imidazolium cations in ILs and the alkaloids. Running buffer containing 40 mmol/L 1-butyl-3-methylimidazolium tetrafluoroborate (BMImBF₄) IL-8 mmol/L phosphate resulted in significant changes in separation selectivity for alkaloids with similar structures. The highest sensitivity of the detection was obtained by maintaining the detection potential at 1.2 V. Under the optimized conditions, relative standard derivations of the ECL intensity and the migration time were 3.27 and 2.84% for verticine and 4.42 and 1.69% for verticinone, respectively. The standard curves were linear between 1 × 10⁻⁸ and 1 × 10⁻⁶ mol/L for verticine and between 5 × 10⁻⁸ and 1 × 10⁻⁶ mol/L for verticinone, respectively. Detection limits of 1.25 × 10⁻¹⁰ mol/L for verticine and 1 × 10⁻¹⁰ mol/L for verticinone were obtained (S/N = 3). Developed method was successfully applied to determine the amounts of alkaloids in Bulbus Fritillariae.     

The role of the dual nature of ionic liquids in the reversed-phase liquid chromatographic separation of basic drugs

The cationic nature of basic drugs gives rise to broad asymmetrical chromatographic peaks with conventional C18 columns and hydro-organic mixtures, due to the ionic interaction of the positively charged solutes with the free silanol groups on the alkyl-bonded reversed-phase packing. Ionic liquids (ILs) have recently attracted some attention to reduce this undesirable silanol activity. ILs are dual modifiers (with a cationic and anionic character), which means that both cation and anion can be adsorbed on the stationary phase, giving rise to interesting interactions with the anionic free silanols and the cationic basic drugs. A comparative study of the performance of four imidazolium-based ILs as modifiers of the chromatographic behaviour of a group of β-blockers is shown. The ILs differed in the adsorption capability of the cation and anion on C18 columns. Mobile phases without additive and containing a cationic (triethylamine, TEA) or anionic (sodium dodecyl sulphate, SDS) additive were used as references for the interpretation of the behaviours. The changes in the nature of the chromatographic system, at increasing concentration of the additives, were followed based on the changes in retention and peak shape of the β-blockers. The silanol suppressing potency of the additives, and the association constants between the solutes and modified stationary phase or additive in the mobile phase, were estimated. The study revealed that SDS and the ionic liquid 1-hexyl-3-methylimidazolium tetrafluoroborate are the best enhancers of chromatographic peak shape among those studied.     

Ionic liquids as additives for separation of benzoic acid and chlorophenoxy acid herbicides by capillary electrophoresis

Ionic liquids (ILs) were tested as additives to phosphate-acetate buffer for the separation of chlorophenoxy and benzoic herbicide acids. The effects of buffer concentration, buffer pH, IL concentration, and concentration of organic solvent were investigated. It was found that in the presence of 40 mM phosphate-acetate containing 10% acetonitrile at pH 4.5, addition of 10 mM 1-butyl-3-methylimidazoium could reverse EOF. The shoulder-merged peaks of two herbicide acids, 2,4-dichlorobenzoic acid and 3,5-dichlorobenzoic acid, were successfully resolved by the addition of IL cation. Apart from these, results showed different IL cations had different influences on the migration behavior of some of the analytes, while IL anions did not lead to obvious difference on the separation.     

Extension of the Ye and Shreeve group contribution method for density estimation of ionic liquids in a wide range of temperatures and pressures

An extension of the Ye and Shreeve group contribution method [C. Ye, J.M. Shreeve, J. Phys. Chem. A 111 (2007) 1456–1461] for the estimation of densities of ionic liquids (ILs) is here proposed. The new version here presented allows the estimation of densities of ionic liquids in wide ranges of temperature and pressure using the previously proposed parameter table. Coefficients of new density correlation proposed were estimated using experimental densities of nine imidazolium-based ionic liquids. The new density correlation was tested against experimental densities available in literature for ionic liquids based on imidazolium, pyridinium, pyrrolidinium and phosphonium cations. Predicted densities are in good agreement with experimental literature data in a wide range of temperatures (273.15–393.15 K) and pressures (0.10–100 MPa). For imidazolium-based ILs, the mean percent deviation (MPD) is 0.45% and 1.49% for phosphonium-based ILs. A low MPD ranging from 0.41% to 1.57% was also observed for pyridinium and pyrrolidinium-based ILs.     

Reversed-phase liquid chromatographic separation of antiretroviral drugs on a monolithic column using ionic liquids as mobile phase additives

The use of 3-methylimidazolium cation-based ionic liquids (ILs) was evaluated as mobile phase additives for separation of antiretroviral drugs on a monolithic column by RP-HPLC. Separation of eight commonly used antiretroviral drugs was achieved on a Chromolith Flash, RP-18e column (25 × 4.6 mm, porous material) using water (pH 4.0 adjusted with acetic acid)/methanol v/v as a mobile phase containing ILs in a gradient elution mode. The effects of concentrations of ILs on retention, resolution and peak shape were studied and a regression equation correlating the interactions between stationary phase and the ILs was established. The retention of all the drugs was decreased notably by using 1-butyl-3-methylimidazolium tetrafluoroborate, while 1-ethyl-3-methylimidazolium methylsulfate reduced gradient drift drastically when compared to triethylamine.     

Simultaneous determination of fangchinoline and tetrandrine in Stephania tetrandra S. Moore by using 1-alkyl-3-methylimidazolium-based ionic liquids as the RP-HPLC mobile phase additives

A reversed phase high performance liquid chromatography (RP-HPLC) method for simultaneous determination of fangchinoline (FAN) and tetrandrine (TET) in Stephania tetrandra S. Moore was established by using 1-hexyl-3-methylimidazolium tetrafluoroborate as the mobile phase additives in this paper. Four types of 1-alkyl-3-methylimidazolium-based ionic liquids (ILs) were used as additives of the mobile phase to separate FAN and TET by RP-HPLC. The effects of the length of the alkyl group on the imidazolium ring and its counterion, the concentrations of IL and the pH of the mobile phase, which influenced the chromatographic behaviors of FAN and TET, were investigated in detail. The linearity, sensitivity, accuracy and repeatability of the proposed method were also investigated. The probable mechanism of the separation with ILs as the mobile phase additives was explored and discussed.     

Effect of ionic liquid additives to mobile phase on separation and system efficiency for HPLC of selected alkaloids on different stationary phases

The silica-based stationary phases with favorable physical characteristics are the most popular in liquid chromatography. However, there are several problems with silica-based materials: severe peak tailing in the chromatography of basic compounds, non-reproducibility for the same chemistry columns, and limited pH stability. Ionic liquids (ILs) as mobile phase components can reduce peak tailing by masking residual free silanol groups. The chromatographic behavior of some alkaloids from different classes was studied on C18, phenyl, and pentafluorophenyl columns with different kinds and concentrations of ionic liquids as additives to aqueous mobile phases. Ionic liquids with different alkyl substituents on different cations or with different counterions as eluent additives were investigated. The addition of ionic liquids has great effects on the separation of alkaloids: decrease in band tailing, increase in system efficiency, and improved resolution. The retention, separation selectivity, and sequence of alkaloid elution were different when using eluents containing various ILs. The increase of IL concentration caused an increase in silanol blocking, thus conducted to decrease the interaction between alkaloid cations and free silanol groups, and caused a decrease of alkaloids retention, improvement of peak symmetry, and increase of theoretical plate number in most cases. The effect of ILs on stationary phases with different properties was also examined. The different properties of stationary phases resulted in differences in analyte retention, separation selectivity, peak shape, and system efficiency. The best shape of peaks and the highest theoretical plate number for most investigated alkaloids in mobile phases containing IL was obtained on pentafluorophenyl (PFP) phase.     

Gas chromatographic and NMR spectroscopic study of the interactions between the tris β-diketone chelates of europium and aliphatic nucleophiles

Summary The aim of this work was to study the utilisation of coordinative europium compounds as stationary phase additives in gas chromatography. The following series of aliphatic nucleophilic compounds were used as solutes: n-alcohols, carboxylic acid methyl esters, ketones, ethers and 1-alkenes. A correlation was established between the chromatographic retention values and the NMR chemical shift changes induced by interactions of the organic molecules with the europium chelate. The agglomerate formation between the europium chelates and nucleophilic compounds involves changes in the NMR spectra and selective increases in the GC retention values when adding europium chelates to the stationary phases. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Partitioning behaviour of organic compounds between ionic liquids and supercritical fluids

Applications and prospects of two-phase, tuneable solvent systems composed of ionic liquids (ILs) and supercritical fluids with an emphasis on supercritical carbon dioxide (scCO(2)) are reviewed. The IL-scCO(2) biphasic systems have increasingly been used in diverse fields of chemistry and technology, and some examples of these applications are mentioned here. Rational design of such applications can obviously benefit from pertinent data on phase equilibria including the partition coefficients of the prospective products and reactants between the two phases. Therefore, a reliable technique to measure the limiting partition coefficients would be of value. Here, the pros and cons of supercritical fluid chromatography in this respect are discussed. An overview of methods for predictive thermodynamic modelling of binary (IL-scCO(2)) and ternary (solute-IL-scCO(2)) systems is also included.     

High performance liquid chromatography with cyclodextrin and calixarene macrocycle bonded silica stationary phases for separation of steroids

β-Cyclodextrin, p-tert-butyl-calix[8]arene and chloropropyl bonded silica stationary phases have been prepared and were applied at the same time to develop a chromatographic procedure to separate steroids. In order to select the best type of stationary phase for the analysis, similar preparation processes of the two kinds of macrocycle stationary phases with the same spacer were adopted respectively. The chromatographic behaviors and retention mechanisms of the two kinds of macrocycle stationary phases for steroids were systematically studied and compared with those of chloropropyl bonded silica and ODS. The effect of mobile phase variables, such as methanol content, pH value of buffer, ionic strength and buffer composition on chromatographic behaviors was investigated. The results showed that the retention mechanisms of the four stationary phases for steroids were obviously different, and excellent separation was achieved on β-cyclodextrin bonded silica stationary phase (β-CD-BS), as a consequence of the structure and the properties of the stationary phase. The retention process on β-CD-BS exhibited inclusion complexation, hydrogen-bonding and weak hydrophobic interaction, while for p-tert-butyl-calix[8]arene bonded silica stationary phase (CBS), π-π and hydrogen-bonding besides hydrophobic interaction played an important role.     

High performance liquid chromatography of aromatic carboxylic acids on p-tert-butyl-calix[8]arene-bonded silica gel stationary phase

A new p-tert-butyl-calix[8]arene-bonded silica gel stationary phase (CABS) was used for the separation of some aromatic carboxylic acids by HPLC. The chromatographic behaviour of the solutes on CABS was studied in comparison with conventional ODS. The results show that the calix[8]arene-bonded phase exhibits a stronger retention and better selectivity than ODS for the aromatic carboxylic acids. The different elution order of the analytes was also observed on both packings, which show the existence of distinct retention mechanisms. According to chromatographic data, it can be concluded that the high selectivity of CABS for aromatic carboxylic acids ascribes to various interactions between CABS and the analytes, such as hydrophobic interaction, hydrogen bonding interaction, π-π interaction and inclusion interaction.     

Supercritical fluid chromatographic solvatochromic modifier polarity studies

To understand the chromatographic process as a whole, whether it be for gas chromatography (GC), liquid chromatography (LC), or supercritical fluid chromatography (SFC), one needs to know the chemical and physical nature of the mobile and stationary phases and also the interactions that take place between analytes (solutes) and the two phases. An approach towards Investigating the ways that stationary and mobile phases contribute to chromatographic retention Involves exploring the effects of solvent polarity on the strength of the mobile phase. In SFC this could involve determining the polarity of several different modifier/carbon dioxide mobile phases. In this paper, the use of a solvatochromic indicator to learn more about the effects of SFC modifier/mobile phase polarity will be investigated and discussed using several different modifiers and a diolmodified silica column.     

Suitability of ionic liquids as mobile‐phase additives in HPLC with fluorescence and UV detection for the determination of heterocyclic aromatic amines

The effects of several ionic liquids (ILs) as mobile‐phase additives in HPLC with fluorescence and UV–Vis detection for the determination of six heterocyclic aromatic amines were evaluated using two different C₁₈ stationary phases with moderate silanol activity. The studied ILs were 1‐butyl‐3‐methylimidazolium tetrafluoroborate, 1‐hexyl‐3‐methylimidazolium tetrafluoroborate and 1‐methyl‐3‐octylimidazolium tetrafluoroborate. The optical behaviour of heterocyclic aromatic amines in presence of ILs was studied and the silanol‐suppressing potency of ILs was evaluated for the two stationary phases studied. Several chromatographic parameters were evaluated in the presence or absence of ILs, or using triethylamine, the most common mobile‐phase additive. The best results were achieved using 1 mM 1‐butyl‐3‐methylimidazolium tetrafluoroborate as mobile‐phase additive and NovaPak^® column. In these conditions and with 18% of ACN in the mobile phase, analytical performance of the chromatographic methods using fluorescence and UV–Vis were evaluated, obtaining good precision in all cases (RSD lower than 6.6%) and low LOD (0.001–0.147 μg/mL with UV–Vis and 0.001–0.006 ng/mL with fluorescence detection).     

Binary ionic liquid mixtures as gas chromatography stationary phases for improving the separation selectivity of alcohols and aromatic compounds

Binary mixtures of two ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride (BMIM-Cl) and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMIM-NTf2), have been studied for the first time as gas chromatographic stationary phases. The two ILs differ only in the nature of the associated anion. The solvation parameter model was used to examine the change of solvation interactions with the IL stationary phase composition. The hydrogen bond basicity increased linearly as the stationary phase was enriched with the BMIM-Cl IL. The retention factor of short-chained alcohols increased by as much as 1100% when performing the separation on a column containing an IL mixture of 25% BMIM-NTf2/75% BMIM-Cl compared to that of the neat BMIM-NTf2 IL column. By tuning the composition of the IL-stationary phase, the separation selectivity and resolution factors of alcohols and aromatic compounds were improved. A reversal of elution order was observed for specific classes of analytes with enhancements in the stationary phase hydrogen bond basicity.     

Thermo-responsive polymer brush-grafted porous polystyrene beads for all-aqueous chromatography

Poly(N-isopropylacrylamide) (PIPAAm) brush-grafted porous polystyrene beads with variable grafted polymer densities were prepared using surface-initiated atom transfer radical polymerization (ATRP) for applications in thermo-responsive chromatography. Utilization of these grafted beads as a stationary phase in aqueous chromatographic analysis of insulin provides a graft density-dependent analyte retention behavior. The separations calibration curve on PIPAAm-grafted polystyrene was obtained using pullulan standards and exhibited inflection points attributed to analyte diffusion into bead pores and partitioning into grafted PIPAAm brush surfaces. Presence of these inflection points supports a separation mechanism where insulin penetrates pores in polystyrene beads and hydrophobically interacts with PIPAAm brushes grafted within the pores. Control of PIPAAm brush graft density on polystyrene facilitates effective aqueous phase separation of peptides based on thermally modulated hydrophobic interactions with grafted PIPAAm within stationary phase pores. These results indicated that PIPAAm brush-grafted porous polystyrene beads prepared by surface-initiated ATRP was effective stationary phase of thermo-responsive chromatography for aqueous phase peptide separations.     

Void volume markers in reversed-phase and biomimetic liquid chromatography

A comparative investigation of 15 void volume marker candidates was carried out on two reversed-phase (RP), two immobilized artificial membrane (IAM) and two immobilized protein columns, namely Human Serum Albumin (HSA) and α₁-acid-glycoprotein (AGP), using different mobile phases in respect to pH and buffer composition. Pycnometric analysis of the 6 chromatographic columns was also employed for reasons of comparison. The results revealed the possible overestimation of stationary phase void volume if a general void volume marker is used under different chromatographic conditions. In particular, overestimation of the investigated columns’ void volumes was a common phenomenon when using acidic eluents or High Purity Water (HPW) as mobile phase. For this purpose, a classification of the recommended chemicals according to the column type or the pH of the mobile phase is suggested for the accurate determination of retention factors.     

Temperature-responsive chromatography for the separation of biomolecules

Temperature-responsive chromatography for the separation of biomolecules utilizing poly(N-isopropylacrylamide) (PNIPAAm) and its copolymer-modified stationary phase is performed with an aqueous mobile phase without using organic solvent. The surface properties and function of the stationary phase are controlled by external temperature changes without changing the mobile-phase composition. This analytical system is based on nonspecific adsorption by the reversible transition of a hydrophilic-hydrophobic PNIPAAm-grafted surface. The driving force for retention is hydrophobic interaction between the solute molecules and the hydrophobized polymer chains on the stationary phase surface. The separation of the biomolecules, such as nucleotides and proteins was achieved by a dual temperature- and pH-responsive chromatography system. The electrostatic and hydrophobic interactions could be modulated simultaneously with the temperature in an aqueous mobile phase, thus the separation system would have potential applications in the separation of biomolecules. Additionally, chromatographic matrices prepared by a surface-initiated atom transfer radical polymerization (ATRP) exhibit a strong interaction with analytes, because the polymerization procedure forms a densely packed polymer, called a polymer brush, on the surfaces. The copolymer brush grafted surfaces prepared by ATRP was an effective tool for separating basic biomolecules by modulating the electrostatic and hydrophobic interactions. Applications of thermally responsive columns for the separations of biomolecules are reviewed here.