Regulating Frozen Electrolyte Structure with Colloidal Dispersion for Low Temperature Aqueous Batteries

Electrolyte freezing under low temperatures is a critical challenge for the development of aqueous batteries (ABs). While lowering the freezing point of the electrolyte has caught major research efforts, limited attention has been paid to the structural evolution during the electrolyte freezing process and regulating the frozen electrolyte structure for low temperature ABs. Here, we reveal the formation process of interconnected liquid regions for ion transport in frozen electrolytes with various in situ variable-temperature technologies. More importantly, the low-temperature performance of ABs was significantly improved with the colloidal electrolyte design using graphene oxide quantum dots (GOQDs), which effectively inhibits the growth of ice crystals and expands the interconnected liquid regions for facial ion transport. This work provides new insights and a promising strategy for the electrolyte design of low-temperature ABs.     

Parcel model for peak shapes in chromatography numerical verification of the temporal distortion effect to peak asymmetry

The traditional plate concept has been reassessed and improved to a parcel matrix model, which can be used to imitate the chromatographic behavior of a hypothetic column on a computer worksheet. Under programmed conditions, various peak shapes (nearly Gaussian, and with prolonged or fronting tails) are generated. The peak tailing has been separated into two major fractions: spatial and temporal. The former fraction is caused by the retention nature of a column, whereas the latter is induced by the observer's relative position and the changing of the zone broadening rate. The temporal distortion effect can be identified qualitatively and quantitatively through a normalized peak-overlapping process. In general, a chromatographic peak may carry a prolonged (or normal type) tail under linear isotherms, while both prolonged and fronting tails will appear under non-linear conditions. The temporal distortion is proved to be significant, and may be regarded as the major cause of peak asymmetry in most cases. This is in contrast to the conclusions of many previous studies. The model is also eligible to simulate chromatographic peaks for various injection sizes.     

Structure of low-density nanoporous dielectrics revealed by low-vacuum electron microscopy and small-angle X-ray scattering

Aerogels (AGs) are ultralow-density nanoporous solids that have numerous potential applications. However, as most AGs are strong insulators with poor mechanical properties, direct studies of the complex nanoporous structure of AGs by methods such as atomic force and conventional scanning electron microscopy (SEM) have not proven feasible. Here, we use low-vacuum SEM to image directly the ligament and pore size and shape distributions of representative AGs over a wide range of length scales (approximately 100-105 nm). The structural information obtained is used for unambiguous, real-space interpretation of small-angle X-ray scattering curves for these complex nanoporous systems. Low-vacuum SEM permits imaging of both cross-sections and skin layers of AG monoliths. Images of skin layers reveal the presence of microcracks, which alter the properties of cast monolithic AGs.     

混合型离子交换液相色谱-串联质谱法检测鸡蛋中10种氨基糖苷类药物残留

该研究系统地优化了样品前处理过程及仪器分析中影响氨基糖苷残留分析准确度与灵敏度的各主要因素,建立了鸡蛋中10种氨基糖苷类药物(链霉素、双氢链霉素、潮霉素B、卡那霉素、阿米卡星、妥布霉素、安普霉素、大观霉素、新霉素、庆大霉素)残留量的混合型离子交换液相色谱-串联质谱分析方法。样品经10 mmol/L乙酸铵缓冲溶液(含0.4 mmol/L EDTA和50 g/L三氯乙酸)超声提取,调节pH至6~7后,经PRiME HLB固相萃取柱富集净化,采用SIELC Obelisc R色谱柱分离,以乙腈和1.0%(v/v)甲酸水溶液(含1 mmol/L甲酸铵)为流动相进行梯度洗脱,在正离子、多反应监测模式下经串联质谱仪测定,外标法定量。该方法在5~200 μg/L质量浓度范围内线性关系良好,相关系数(r²)均大于0.99;方法的检出限(LOD, S/N≥3)为2~5 μg/kg,定量限(LOQ, S/N≥10)为5~10 μg/kg。在空白鸡蛋中进行LOQ、20 μg/kg、100 μg/kg 3个水平的加标回收实验,方法的平均回收率(n=6)为68.1%~111.3%,相对标准偏差为1.2%~12.3%。利用该方法对市售的20批次鸡蛋样品进行测定,均未检出目标物。本方法简单、灵敏、准确,可实现鸡蛋中10种氨基糖苷类药物残留的批量检测。     

A light scattering and fluorescence emission coupled ratiometry using the interaction of functional CdS quantum dots with aminoglycoside antibiotics as a model system

Any signals, if their intensities have simple functional relationship with analyte concentration, can be applied to analytical purposes. Rayleigh light scattering signals and fluorescence signals are twins in flurospectroscopy, so the light scattering signals are the major interference when the Stokes shift is small. Herein, we propose a light scattering and fluorescence emission (LS-FL) coupled ratiometry using CdS quantum dots (QDs) as a fluorescence probe to detect aminoglycoside antibiotics (AGs). As model analytes, AGs, when attached to the surface of CdS-QDs via electrostatic interaction in aqueous medium, result in strong enhanced light scattering (LS) emission characterized at 376 nm and fluorescence quenching of CdS-QDs at 500 nm. Thus, a ratiometry using the coexistent light scattering and fluorescent emission signals has been proposed. Based on the linear relationship between logarithm of light scattering and fluorescence emission ratio (R) and logarithm of AGs concentration, a novel assay of AGs is established with the limits of detection (3σ) being 58-190 nmol l⁻¹, and applied successfully to detect AGs injection and serum samples.     

Assembly of bionanostructures onto beta-cyclodextrin molecular printboards for antibody recognition and lymphocyte cell counting

The assembly of complex bionanostructures onto beta-cyclodextrin (betaCD) monolayers has been investigated with the aims of antibody recognition and cell adhesion. The formation of these assemblies relies on host-guest, protein-ligand, and protein-protein interactions. The buildup of a structure consisting of a divalent bis(adamantyl)-biotin linker, streptavidin (SAv), biotinylated protein A (bt-PA), and an Fc fragment of a human immunoglobin G (IgG-Fc) was studied with surface plasmon resonance (SPR) spectroscopy. Patterns of this bionanostructure were obtained via microcontact printing of the divalent linker at the molecular printboard, followed by the subsequent attachment of the proteins. Fluorescence microscopy showed that the buildup of these bionanostructures on the betaCD monolayers is highly specific. On the basis of these results, bionanostructures were made in which whole antibodies (ABs) were used instead of the IgG-Fc. These ABs were bound to the SAv layer via biotinylated protein G (bt-PG) or via a biotinylated AB. These constructions yielded specifically bound ABs with a less than maximal density, as shown by SPR spectroscopy and atomic force microscopy (AFM). Finally, the immobilization of ABs to the molecular printboard was used to create platforms for lymphocyte cell count purposes. Monoclonal ABs (MABs) were attached to the SAv layer using bt-PG, an engineered biotin functionality, or through nonspecific adsorption. The binding specificity of the immobilized cells was the highest on the buildup made from bt-PG, which is attributed to an optimized orientation of the antibodies. An approximately linear relationship between the numbers of seeded cells and counted cells was demonstrated, rendering the platform potentially suitable for lymphocyte cell counting.     

Simultaneous characterization of isoflavonoids and astragalosides in two Astragalus species by high-performance liquid chromatography coupled with atmospheric pressure chemical ionization tandem mass spectrometry

A method was developed for the simultaneous identification of astragalosides (AGs) and isoflavonoids (IFs) in the roots of Astragalus membranaceus and Astragalus mongholicus by HPLC coupled with atmospheric pressure chemical ionization MS/MS (HPLC-APCI-MS/MS). Diagnostic fragment ions of AGs and different group of IFs were obtained with one AG and eight IF standards analyzed by CID-MS, which were adopted as characteristic MS/MS fingerprints for further identification of these compounds in the two Astragalus species by using HPLC-APCI-MS/MS. A total of 20 IFs and 10 AGs were identified or tentatively identified. Among them, six IFs were detected in A. membranaceus for the first time and five IFs were firstly identified in A. mongholicus. The results indicate that HPLC-APCI-MS/MS is a powerful tool for the simultaneous characterization of IFs and AGs in complex matrix.     

Detection of Fraudulent use of Zeranol and Natural Occurence of Zearalenone in Cattle Urine by High Performance Liquid Chromatography

Abstract

Zeranol, fraudulently used for the purpose of cattle fattening can be differentiated from the natural presence of zearalenone resulting from food animal contamination. High performance liquid chromatography and ultraviolet spectrophotometric detection are proposed to separate and to quantify these two substances and their main metabolities. Veal urine sampoes containing zeranol have been analyzed. A mathematical solution is suggested to overcome the difficulty of an inevitable chromatographic interference.     

Chromatographic fingerprinting: An innovative approach for food 'identitation' and food authentication – A tutorial

Fingerprinting methods describe a variety of analytical methods that provide analytical signals related to the composition of foodstuffs in a non-selective way such as by collecting a spectrum or a chromatogram. Mathematical processing of the information in such fingerprints may allow the characterisation and/or authentication of foodstuffs. In this context, the particular meaning of 'fingerprinting', in conjunction with 'profiling', is different from the original meanings used in metabolomics. This fact has produced some confusion with the use of these terms in analytical papers. Researchers coming from the metabolomic field could use 'profiling' or 'fingerprinting' on a different way to researchers who are devoted to food science. The arrival of an eclectic discipline, named 'foodomics' has not been enough to allay this terminological problem, since the authors keep on using the terms with both meanings. Thus, a first goal of this tutorial is to clarify the difference between both terms. In addition, the chemical approaches for food authentication, i.e., chemical markers, component profiling and instrumental fingerprinting, have been described. A new term, designated as 'food identitation', has been introduced in order to complete the life cycle of the chemical-based food authentication process. Chromatographic fingerprinting has been explained in detail and some strategies which could be applied has been clarified and discussed. Particularly, the strategies for chromatographic signals acquisition and chromatographic data handling are unified in a single framework. Finally, an overview about the applications of chromatographic (GC and LC) fingerprints in food authentication using different chemometric techniques has been included.     

Infrared methods for high throughput screening of metabolites: food and medical applications

Chemical and physiological properties are related to individual or bioactive compounds such as essential oils, terpenoids, flavonoids, volatile compounds and other chemicals which are present in natural products in low concentrations (e.g. ppm or ppb). For many years, classical separation, chromatographic and spectrometric techniques such as high performance liquid chromatography (HPLC), gas chromatography (GC), liquid chromatography (LC) and mass spectrometry (MS) have been used for the elucidation of isolated compounds from different matrices. Hence, the use of standard separation, chromatographic and spectrometric methods was found useful in chemical and both plant and animal physiology studies, for fingerprinting and comparing natural and synthetic samples, as well as to identify single active compounds. It has been generally accepted that a single analytical technique will not provide sufficient visualization of the metabolome, hence holistic techniques are needed for comprehensive analysis. In the last 40 years near infrared (NIR) spectroscopy became one of the most attractive and used methods of analyzing agricultural related products and plant materials which provide simultaneous, rapid and non-destructive quantitation of major. This technique has been reported to determine other minor compounds in plant materials such as volatile compounds and elements. The aim of this short review is to describe some recent applications of NIR spectroscopy combined with multivariate data analysis for high throughput screening of metabolites with an emphasis on food and medical applications.     

Three-way principal component analysis of the volatile fraction by HS-SPME/GC of aceto balsamico tradizionale of modena

The present research is aimed at monitoring the evolution of the volatile organic compounds of different samples of aceto balsamico tradizionale of modena (ABTM) during ageing. The flavouring compounds, headspace fraction, of the vinegars of four batterie were sampled by solid phase microextraction technique (SPME), and successively analysed by gas chromatography. Obtaining a data set characterized by different sources of variability such as, different producers, samples of different age and chromatographic profile. The gas chromatographic signals were processed by a three-way data analysis method (Tucker3), which allows an easy visualisation of the data by furnishing a distinct set of graphs for each source of variability. The obtained results indicate that the samples can be separated according to their age highlighting the chemical constituents, which play a major role for their differentiation. The present study represents an example of how the application of Tucker3 models, on gas chromatographic signals may help to follow the transformation processes of food products.     

Anionic groups on cellulosic fiber surfaces investigated by XPS, FTIR-ATR, and different sorption methods

Anionic groups (AGs) on different cellulosic fiber surfaces were investigated by methylene blue (MB) and polyelectrolyte (PE) sorption, X-ray photoelectron spectroscopy (XPS), and total attenuated reflectance infrared spectrometry (FTIR-ATR). The MB sorption isotherms fitted well the Langmuir equation that gave consistent estimations of sorption capacities. FTIR-ATR showed that MB molecules had extensive accessibility to the fiber wall pores. Estimation of surface AGs by PE sorption gave much higher values than a new method combining MB sorption and XPS measurements (MB-XPS). The surface AGs in different cellulosic fibers accounted for 1-3% of the total AG content as revealed by MB-XPS. It was suggested that PE molecules can penetrate the fiber wall and form loops or unattached segments at external fiber surfaces that disrupt the PE sorption stoichiometry. The competition of MB and PE for the anionic sites in papermaking was assessed and it was shown that MB ions have a much stronger affinity to AGs than PE molecules.     

Pyrene‐Based Fluorescent Ambidextrous Gelators: Scaffolds for Mechanically Robust SWNT–Gel Nanocomposites

With the rapid progress in the development of supramolecular soft materials, examples of low‐molecular‐weight gelators (LMWGs) with the ability to immobilise both water and organic solvents by the same structural scaffold are very limited. In this paper, we report the development of pyrene‐containing peptide‐based ambidextrous gelators (AGs) with the ability to efficiently gelate both organic and aqueous solvents. The organo‐ and hydrogelation efficiencies of these gelators are in the range 0.7–1.1 % w/v in various organic solvents and 0.5–5 % w/v in water at certain acidic pH values (pH 2.0–4.0). Moreover, for the first time, AGs have been utilised to prepare single‐walled carbon‐nanotube (SWNT)‐included soft nanocomposites in both hydro‐ and organogel matrices. The influence of different non‐covalent interactions such as hydrogen bonding, hydrophobic, π–π and van der Waals interactions in self‐assembled gelation has been studied in detail by circular dichroism, FTIR, variable‐temperature NMR, 2D NOESY and luminescence spectroscopy. Interestingly, the presence of the pyrene moiety in the structure rendered these AGs intrinsically fluorescent, which was quenched upon successful integration of the SWNTs within the gel. The prepared hydro‐ and organogels along with their SWNT‐integrated nanocomposites are thermoreversible in nature. The supramolecular morphologies of the dried gels and SWNT–gel nanocomposites have been studied by transmission electron microscopy, fluorescence microscopy and polarising optical microscopy, which confirmed the presence of three‐dimensional self‐assembled fibrillar networks (SAFINs) as well as the integrated SWNTs. Importantly, rheological studies revealed that the inclusion of SWNTs within the ambidextrous gels improved the mechanical rigidity of the resulting soft nanocomposites up to 3.8‐fold relative to the native gels.     

Chromatographic methods for the determination of toxicants in faeces.

Modern chromatographic techniques and their application in the determination of toxic compounds in faeces are reviewed. Faecal analysis may be of importance in toxicokinetic studies of xenobiotics in order to determine factors such as metabolism, body burden and major routes of elimination. Compounds of interest include various food constituents, drugs and occupational or environmental factors. Further, various mutagenic or carcinogenic compounds which are excreted by faeces have been indicated to represent risk factors for colorectal cancer. In this context, the chromatographic determination of the endogenously generated fecapentaenes and bile acids, both postulated etiological factors in colorectal carcinogenesis, is reviewed. For fecapentaene determination, several high-performance liquid chromatographic (HPLC) methods are available; however, the applicability of some of these methods is limited owing to insufficient separation of various isomeric forms or discrimination between fecapentaenes and their precursors. For the determination of bile acids in faeces, many chromatographic procedures have been reported, and the characteristics of the most relevant methods are compared and discussed. It is concluded that separation by gas chromatography (GC) in combination with mass spectrometry provides the highest selectivity and sensitivity. A relatively rapid alternative analysis for the determination of total and aqueous faecal bile acids is proposed. Further, methods for the determination of polycyclic aromatic hydrocarbons (PAHs) are reviewed. Although the use of radiolabelled PAHs in animal studies has many advantages, it cannot be applied for human biological monitoring and HPLC and GC provide sensitive alternatives. An HPLC method for the determination of non-metabolized PAHs in faeces is described.     

Aminoglycoside analysis in food of animal origin with a zwitterionic stationary phase and liquid chromatography–tandem mass spectrometry

In this study, fourteen highly polar aminoglycoside (AGs) antibiotics were selected. Various stationary phases were tested, including Obelisc R, ZIC-HILIC, BEH amide and aminopropyl. The nature of the stationary phase, mobile phase (water or buffer solutions and acetonitrile), pH (percentage of formic acid), gradient conditions and injection solvents were systematically studied as relevant parameters for tuning retention selectivity and detectability of AGs in liquid chromatography electrospray tandem mass spectrometry (LC–(ESI)–MS/MS). Only the two zwitterionic phases (Obelisc R and ZIC-HILIC) achieved a proper chromatographic separation considering interferences due to the crosstalk effect in low resolution mass spectrometers. The water/acetonitrile mobile phase containing 1% formic acid used with Obelisc R provided more sensitivity than the highly concentrated buffered mobile phases required for ZIC-HILIC. A solid phase extraction (SPE) clean-up procedure with polymeric weak cation exchange (WCX) cartridges was optimized for honey, milk and liver samples. Different brands of cartridges and elution solvents were tested, and the Taurus WCX offered the best recovery rate with a buffer elution at pH 3. The final optimized method was validated in these matrices according to Decision 2002/657/EC. A monitoring campaign for sixty honey, milk and liver samples was carried out at the Food Authority Control in Geneva. The concentration of dihydrostreptomycin (DSTP) found in one ovine liver exceeded the established maximum residue levels (MRLs) within the European and Swiss legislations but it was compliant taking into account the validation data.     

Determination of mycotoxins in human foods

This tutorial review deals with the analytical methods available for the determination of mycotoxins in food commodities. As the secondary metabolites of a range of fungal species, mycotoxins possess diverse chemical structures, presenting analytical chemists with a unique set of challenges in the microg kg(-1) (ppb) range. A number of analytical methods have been applied to mycotoxin analysis. These include widely applicable HPLC methods with UV or fluorimetric detection, which are extensively used both in research and for legal enforcement of food safety legislation and for regulations in international agricultural trade. Other chromatographic methods, such as TLC and GC, are also employed for the determination of mycotoxins, whereas recent advances in analytical instrumentation have highlighted the potential of LC-MS methods, especially for multi-toxin determination and for confirmation purposes. Conventional chromatographic methods are generally time consuming and capital intensive, and hence a range of methods, mostly based on immunological principles, have been developed and commercialised for rapid analysis. These methods include, among others, enzyme-linked immunosorbent analysis (ELISA), direct fluorimetry, fluorescence polarization, and various biosensors and strip methods.     

Applications of a copper microparticle-modified carbon fiber microdisk array electrode for the simultaneous determination of aminoglycoside antibiotics by capillary electrophoresis

A copper microparticle-modified carbon fiber microdisk array electrode was fabricated and employed in capillary electrophoresis for the simultaneous determination of the five aminoglycoside antibiotics (AGs) including netilmicin, tobramycin, lincomycin, kanamycin and amikacin. The array electrode exhibited high catalytic activity for AGs, good reproducibility and stability. Under the optimum separation conditions (separation voltage of 6.2 kV, electrophoretic medium of 125 mM NaOH), the five AGs above were baseline separated within 20 min. At a working electrode potential of 0.7 V (versus saturated calomel electrode), the calibration curves were linear over two orders of magnitude of concentration, and the detection limits (SIN=3) were below 2 microM except for lincomycin (6.7 microM). The developed method was successfully employed for the simultaneous determination of the five AGs studied in pharmaceutical injections. The feasibility of this method for the simultaneous determination of lincomycin, kanamycin and amikacin in urine sample was also demonstrated.     

Preparative enrichment and separation of astragalosides from Radix Astragali extracts using macroporous resins

The enrichment and separation of astragalosides I–IV (AGs I–IV) were studied on eight macroporous resins in the present study. SA‐3 resin offered the best adsorption and desorption capacities for AGs I–IV than other resins. The models of adsorption kinetics were investigated in order to elucidate the mechanism of adsorption. The pseudo‐second‐order model was the better choice than the pseudo‐first‐order model to describe the adsorption behavior of AGs I–IV onto SA‐3 resin. The equilibrium experimental data were well fitted to Langmuir and Freundlich isotherms. SA‐3 resin adsorption chromatography tests were carried out to optimize the separation process of AGs I–IV from Radix Astragali extracts. With the optimum parameters for adsorption and desorption, the contents of AGs I–IV were 8.78‐, 11.60‐, 10.52‐ and 11.28‐fold increased with the recovery yields being 65.88, 90.92, 84.25 and 94.17%, respectively. The preparative enrichment and separation of AGs I–IV from Radix Astragali extracts can be easily and effectively achieved by SA‐3 resin adsorption chromatography. The developed methodology can also be referenced for the separation of other active constituents from herbal materials and manufacture of Radix Astragali products.     

High‐performance liquid chromatography/mass spectrometric and proton nuclear magnetic resonance spectroscopic studies of the transacylation and hydrolysis of the acyl glucuronides of a series of phenylacetic acids in buffer and human plasma

The use of high‐performance liquid chromatography/mass spectrometry (HPLC/MS) and proton nuclear magnetic resonance (¹H NMR) spectroscopy for the kinetic analysis of acyl glucuronide (AG) isomerisation and hydrolysis of the 1‐β‐O‐acyl glucuronides (1‐β‐O‐AG) of phenylacetic acid, (R)‐ and (S)‐α‐methylphenylacetic acid and α,α‐dimethylphenylacetic acid is described and compared. Each AG was incubated in both aqueous buffer, at pH 7.4, and control human plasma at 37°C. Aliquots of these incubations, taken throughout the reaction time‐course, were analysed by HPLC/MS and ¹H NMR spectroscopy. In buffer, transacylation reactions predominated, with relatively little hydrolysis to the free aglycone observed. In human plasma incubations the calculated rates of reaction were much faster than for buffer and, in contrast to the observations in buffer, hydrolysis to the free aglycone was a significant contributor to the overall reaction. A diagnostic analytical methodology based on differential mass spectrometric fragmentation of 1‐β‐O‐AGs compared to the 2‐, 3‐ and 4‐positional isomers, which enables selective determination of the former, was confirmed and applied. These findings show that HPLC/MS offers a viable alternative to the more commonly used NMR spectroscopic approach for the determination of the transacylation and hydrolysis reactions of these AGs, with the major advantage of having the capability to do so in a complex biological matrix such as plasma. Copyright © 2010 John Wiley & Sons, Ltd.