Determination of dissolved organic nitrogen in natural waters using high-temperature catalytic oxidation

Studies on nitrogen in natural waters have generally focussed on dissolved inorganic nitrogen (DIN), primarily because of relative ease of analysis and the important influence of DIN on water quality. Advances in analytical techniques now permit the systematic study of dissolved organic nitrogen (DON), and this work has shown that DON is quantitatively significant in many waters. This article describes the sampling and analytical protocols required for rapid, precise and reliable determinations of DON, involving high-temperature catalytic oxidation (HTCO), coupled to chemiluminescence detection. This approach simultaneously determines dissolved organic carbon (DOC) and total dissolved nitrogen (TDN), and DON is derived by subtraction of DIN measured by colorimetry. The DON determination is simple to perform, exhibits excellent precision (<1% for C and 1.5% for N) and is applicable to a wide range of natural waters.     

Determination of dissolved inorganic phosphorus in natural waters at nanomolar concentrations using a long capillary cell detector

A high sensitivity spectrophotometric system using a long capillary cell (LCC) detector was developed to determine dissolved inorganic phosphorus (DIP) at nanomolar concentrations in natural waters. The colorimetric chemistry used is based on the classical molybdophosphate blue technique. The radiation source is a near-infrared light-emitting diode and a silicon phototransistor is used as a detector. Method parameters were optimized for the final LCC design. With a 600-mm LCC, a detection limit (twice the standard deviation of the blank) of 1 nmol l^?1 was obtained with a relative standard deviation of 6%. The working range of the instrument is 1–500 nmol l^?1 DIP, and a sample volume of 10 ml is required for each analysis. The technique was applied to both fresh and marine water. The instrument is compact, relatively simple and easy to use in the laboratory and the field.     

Determination of mono- to octachlorobiphenyls in fish oil using florisil adsorption followed by headspace solid-phase microextraction and gas chromatography with time-of-flight mass spectrometric detection

A simple and reliable method for the determination of polychlorinated biphenyls (PCBs) from mono- to octachlorobiphenyls in fish oil for dietary supplement is described. The method combines Florisil clean up and headspace solid-phase microextraction on 65 microm polydimethylsiloxane-divinylbenzene (PDMS-DVB). Analyte detection was carried out using GC-time-of-flight mass spectrometry (GC-TOF-MS). Fifty three PCB congeners including the seven indicator PCBs (IUPAC Nos. 28, 52, 101, 118, 138, 153 and 180) were analyzed. Under optimal conditions, the method detection limit (MDL) of each congener in the range from 0.8 to 31 ng/g was found. A certified reference material (BCR-349) was analyzed and it showed good agreement with the certified data.     

Speciation of dissolved inorganic antimony in natural waters using liquid phase semi-microextraction combined with electrothermal atomic absorption spectrometry

Liquid-liquid extraction preconcentration technique which allows the achievement of extremely high ratio between the aqueous and organic phase was specified as semi-microextraction. A modified highly effective liquid phase semi-microextraction (LSME) procedure was developed for preconcentration and determination of ultra trace levels of inorganic antimony species in environmental waters using electrothermal atomic absorption spectrometry (ETAAS) for quantification. Antimony(III) species were selectively extracted as dithiocarbamate complexes from 100 mL aqueous phase into 250 μL xylene at pH range of 5-8. Total Sb was determined using the same extraction system over a sample acidity range of pH 0-1.2 without the need for pre-reduction of Sb(V) to Sb(III). The concentration of Sb(V) was obtained as the difference between that of total antimony and Sb(III). With an 8 min extraction an enrichment factor of 400 was achieved. The limit of detection (3 s) was 2 ng L⁻¹ Sb. The method was not affected by the presence of up to 0.01% humic acid, 0.025 mol L⁻¹ EDTA, 0.01 mol L⁻¹ tartaric acid and 0.001 mol L⁻¹ F⁻. Recoveries of spiked Sb(III) and Sb(V) in river, tap, and sea water samples ranged from 93 to 108%. The results for total antimony concentration in the river water reference material SLRS-5 were in good agreement with the information value. The procedure was applied to the determination and quantification of dissolved antimony species in natural waters.     

Determination of methylmercury in natural waters by headspace gas chromatography with microwave-induced plasma detection after preconcentration on a resin containing dithiocarbamate groups

A method for the determination of methylmercury at ng l^?1 levels in natural waters is described. Methylmercury present in a sample is first preconcentrated on a column of a resin containing dithiocarbamate groups and eluted quantitatively with acidic thiourea solution. Methylmercury in the effluent is then converted to the iodide by addition of sulphuric acid and iodoacetic acid and determined by headspace gas chromatography with microwave-induced plasma detection. The adsorption properties of the resin are discussed.     

Determination of pKa values of some novel benzimidazole salts by using a new approach with 1H NMR spectroscopy

Benzimidazoles and their derivatives including imidazole are studied widely because they exist in the structure of natural products and different drugs. pK_a values are extremely important for drug discovery and improvement in order to determine pharmacokinetic and pharmacodynamic features such as permeation through biological barriers, interactions with the target area or side effects. Acid–base features (pK_a) have great importance not only for physiological characteristics but also for being used as a ligand or changing physico‐chemical features by turning benzimidazoles into salts. Within the scope of this study, a variety of new benzimidazole salts were synthesized, and their characterizations were made by NMR spectroscopy, FTIR spectroscopy and element analysis techniques. The pK_a values of synthesized benzimidazole salts were determined by inflection point approach using integration values obtained with ¹H NMR spectroscopy and Henderson–Hasselbalch analysis. pK_a values of some benzimidazole salts were also determined by potentiometric methods in order to compare those of NMR spectroscopy results. Copyright © 2015 John Wiley & Sons, Ltd.     

Determination of poisonous metals in wastewater collected from paint manufacturing plant using laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy (LIBS) system was developed for determination of toxic metals in wastewater collected from local paint manufacturing plant. The plasma was generated by focusing a pulsed Nd:YAG laser at 1064 nm on the solid residue from wastewater collected from paint industry. The concentration of different elements of environmental significance like, lead, copper, chromium, calcium, sulphur, magnesium, zinc, titanium, strontium, nickel, silicone, iron, aluminum, barium, sodium, potassium and zirconium, in paint wastewater were 6, 3, 4, 301, 72, 200, 20, 42, 4, 1, 35, 120, 133, 119, 173, 28 and 12 mg kg⁻¹, respectively. The evaluation of potential and capabilities of LIBS as a rapid tool for paint industry effluent characterization is discussed in detail. Optimal experimental conditions were evaluated for improving the sensitivity of our LIBS system through parametric dependence study. The laser-induced breakdown spectroscopy (LIBS) results were compared with the results obtained using standard analytical technique such as inductively coupled plasma emission spectroscopy (ICP). The relative accuracy of our LIBS system for various elements as compared with ICP method is in the range of 0.03-0.6 at 2.5% error confidence. Limits of detection (LOD) of our LIBS system were also estimated for the above mentioned elements.     

Determination of Zn(II) in natural waters by ICP-OES with on-line preconcentration using a simple solid phase extraction system

An on-line zinc preconcentration and determination system implemented with inductively coupled plasma optical emission spectrometry (ICP-OES) was developed. The zinc was precipitated and retained on a minicolumn filled with ethyl vinyl acetate (EVA) at pH 9.0, without using any complexing reagent. The zinc ions were eluted from the minicolumn with 10% (v/v) hydrochloric acid. Experimental conditions including pH and sample loading and eluting variables were evaluated and established.An enrichment factor (EF) of 44 was obtained for Zn²⁺ with a preconcentration time of 120 s. Under the optimal conditions, the value of the limit of detection (3σ) for the preconcentration of 10 mL of sample was 0.08 μg L^{− 1}. The sampling frequency was about 24 h^{− 1}. The precision for six replicate determinations (repeatability conditions) at 50 μg L^{− 1} Zn level was 3.94% relative deviation standard (RSD), calculated from the peak heights obtained. The methodology was successfully applied to the determination of zinc in tap water samples and in a certified VKI reference material QC Metal LL1 DHI (Water & Environment) Denmark.     

Quantitative analysis of isoprene units in natural rubber and synthetic polyisoprene using 1H-NMR spectroscopy with an internal standard

Isoprene units in natural rubber (NR) and its synthetic analogues were quantified by ¹H-NMR spectroscopy using polyethylene glycol (PEG) as an internal standard. The effect of PEG and rubber concentrations, molar ratio of rubber/PEG, measuring temperature and scan number on the quantification was investigated to establish the respective working range. Analysis of commercial grades of NR revealed that the differences in 1,4 isoprene content is caused by the production process and feedstock, in which proteins and lipids were found to be the major impurity in NR. Gel fraction of NR has insignificant effect on the measurement of 1,4 isoprene content. Furthermore, the new method was found to produce good results for the quantification of 1,4 and 3,4 units of synthetic polyisoprenes.     

Comparison between different data pre-treatment methods in the analysis of forage samples using near-infrared diffuse reflectance spectroscopy and partial least-squares multivariate calibration method

Moisture and protein content of alfalfa samples from Catalonia (Spain) have been analyzed by near-infrared (NIR) diffuse reflectance spectroscopy and multivariate calibration methods. In order to remove systematic variation in experimental data, such as base-line and multiplicative scatter effects, the evaluation of different data pre-processing methods is performed. Different figures of merit are used for quality assessment and comparison of these pre-treatment methods.     

Determination of benzo[a]pyrene in cigarette mainstream smoke by using mid-infrared spectroscopy associated with a novel chemometric algorithm

Determination of benzo[a]pyrene (BaP) in cigarette smoke can be very important for the tobacco quality control and the assessment of its harm to human health. In this study, mid-infrared spectroscopy (MIR) coupled to chemometric algorithm (DPSO-WPT-PLS), which was based on the wavelet packet transform (WPT), discrete particle swarm optimization algorithm (DPSO) and partial least squares regression (PLS), was used to quantify harmful ingredient benzo[a]pyrene in the cigarette mainstream smoke with promising result. Furthermore, the proposed method provided better performance compared to several other chemometric models, i.e., PLS, radial basis function-based PLS (RBF-PLS), PLS with stepwise regression variable selection (Stepwise-PLS) as well as WPT-PLS with informative wavelet coefficients selected by correlation coefficient test (rtest-WPT-PLS). It can be expected that the proposed strategy could become a new effective, rapid quantitative analysis technique in analyzing the harmful ingredient BaP in cigarette mainstream smoke.     

Determination of nanomolar concentrations of phosphate in natural waters using flow injection with a long path length liquid waveguide capillary cell and solid-state spectrophotometric detection

A flow injection manifold incorporating a 1 m liquid waveguide capillary cell and a miniature fibre-optic spectrometer for the determination of low phosphorus concentrations in natural waters is reported. The limit of detection (blank + 3 S.D.) was 10 nM using the molybdenum blue chemistry with tin(II) chloride reduction. The sensitivity of the flow injection manifold was improved by 100-fold compared with a conventional 1 cm flow cell. The response was measured at 710 nm and background corrected by subtracting the absorbance at 447 nm. Interference from silicate was effectively masked by the addition of 0.1% (m/v) tartaric acid and results were in good agreement (P = 0.05) with a segmented flow analyser reference method for freshwater samples containing 1 μM phosphate.     

Determination of the percentage of milk (cow's, ewe's and goat's) in cheeses with different ripening times using near infrared spectroscopy technology and a remote reflectance fibre-optic probe

In the present work we studied the use of near infrared spectroscopy (NIRS) technology employing a remote reflectance fibre-optic probe (with a 5 cm × 5 cm quartz window) for the analysis of the percentage of milk (cow's, ewe's and goat's) used in the elaboration of cheeses with different ripening times. To do so, cheeses with known and varying percentages of cow's, ewe's and goat's milk were elaborated (112 samples with milk collected in winter and 112 samples with milk collected in summer) and used as reference material, and ripening controls were performed over 6 months. The method allows immediate control of the cheese without prior sample treatment or destruction by direct application of the fibre-optic probe to the sample. The regression method employed was modified partial least squares (MPLS). Of all the samples (224), 200 formed to so-called calibration set and the other 24 were used for external validation. The calibration results obtained using 200 samples of cheese allowed the percentage of cow's, ewe's and goat's milk to be measured. The multiple correlation coefficients (RSQ) and prediction corrected standard errors (SEP(C)) obtained were respectively, 0.834 and 11.6% for cow's milk; 0.871 and 9.8% for goat's milk; 0.880 and 10.6% for ewe's milk. The ratio performance deviation (RPD) values obtained indicate that the NIRS equations can be applied to unknown samples.     

Simultaneous screening and quantification of aminoglycoside antibiotics in honey using mixed‐mode liquid chromatography with quadrupole time‐of‐flight mass spectroscopy with heated electrospray ionization

An analytical method based on liquid chromatography with quadrupole time‐of‐flight mass spectrometry has been developed for the simultaneous determination of six aminoglycoside antibiotics in honey. The sample pretreatment included extraction with aqueous trichloroacetic acid followed by solid‐phase extraction on Strata‐X polymeric reversed phase cartridges. Liquid chromatography separation was performed on an Obelisc R zwitterionic type mixed‐mode column. An ionBooster™ heated electrospray source was used and showed enhanced ionization efficiency in comparison to a conventional electrospray source. The observed signal enhancement ranged from 3‐ (neomycin) to 16‐fold (gentamicin C1). A data‐dependent mass spectrometry acquisition approach was employed, in which the full mass spectrometry dataset provided quantification and a scheduled precursor list was used to trigger an alternating data‐dependent acquisition of MS² spectra for confirmation purposes. The described method was validated in accordance to CD 2002/657/EC. Decision limit values were in the range 11.2–33.6 ng/g, and satisfactory performance characteristics were obtained for recovery (65–76%), repeatability (3.8–7.3%), and linearity (≥0.995). The method was applied to the analysis of 49 real honey samples from the country of Georgia. Streptomycin was detected in two samples at 117 and 35 ng/g, and gentamicin C1 was detected in one sample at 32 ng/g.