Langmuir-Blodgett film of p-tert-butylthiacalix[4]arene modified glassy carbon electrode as voltammetric sensor for the determination of Hg(II)

The π-A isotherms and UV-vis spectra of the transferred films suggested that the monolayer of p-tert-butylthiacalix[4]arene can coordinate with Hg²⁺ at the air-water surface. From these observations, a glassy carbon electrode coated with Langmuir-Blodgett film of p-tert-butylthiacalix[4] arene as a new voltammetric sensor is designed for the determination of trace amounts of Hg²⁺. Compared with bare glassy carbon electrode and modified glassy carbon electrode using direct coating method, the Langmuir-Blodgett film-modified electrode can greatly improve the measuring sensitivity of Hg²⁺. Under the selected conditions, the Langmuir-Blodgett film-modified electrode in 0.1 mol L⁻¹ H₂SO₄ + 0.01 mol L⁻¹ KCl solution shows a linear voltammetric response for Hg²⁺ in the range of 5.0 × 10⁻¹⁰ to 1.5 × 10⁻⁷ mol L⁻¹, with a detection limit of 2.0 × 10⁻¹⁰ mol L⁻¹. The proposed method was also applied to determine Hg²⁺ in water samples (tap, lake and river water). In addition, the fabricated electrode exhibited a distinct advantage of simple preparation, non-toxicity, good reproducibility and good stability.     

Bulk optode sensors for batch and flow-through determinations of lead ion in water samples

A sensitive optode consisting of highly lead-selective ionophore (Lead IV), proton-selective chromoionophore (ETH 5294) and lipophilic anionic sites (KTpClPB) in plasticized polyvinyl chloride (PVC) membrane was fabricated. The optode membranes were used for determination of Pb²⁺ by absorption spectrophotometry in batch and flow-through systems. The influence parameters such as pH, type of buffer solution, response time and concentration of regenerating solution were optimized. The membrane responded to Pb²⁺ by changing its color from blue to pinkish purple in Tris buffer containing different concentration of Pb²⁺ at pH 7.0. The optode provided the response range of 3.16 × 10⁻⁸ to 5.00 × 10⁻⁵ mol L⁻¹ Pb²⁺ with the detection limit of 2.49 × 10⁻⁸ mol L⁻¹ in the batch system within the response time of 30 min. The dynamic range of 1.26 × 10⁻⁸ to 3.16 × 10⁻⁵ mol L⁻¹ Pb²⁺ with detection limit of 8.97 × 10⁻⁹ mol L⁻¹ were obtained in the flow-through system within the response time of 15 min. Moreover, the proposed optode sensors showed good selectivity towards Pb²⁺ over Na⁺, K⁺, Mg²⁺, Cd²⁺, Hg²⁺ and Ag⁺. It was successfully applied to determine Pb²⁺ in real water samples and the results were compared with well-established inductively coupled plasma optical emission spectrometry (ICP-OES). No significant different value (t_critical = 4.30 > t_exp = 1.00-3.42, n = 3 at 95% of confidence level) was found.     

An optical sensor for mercury ion based on the fluorescence quenching of tetra(p-dimethylaminophenyl)porphyrin

An optical sensor for mercury ion (Hg²⁺), based on quenching the fluorescence of the sensing reagent porphyrin immobilized in plasticized poly(vinyl chloride) (PVC) membrane, has been developed. The responses to mercury ion were compared for the sensors modified with three porphyrin compounds including 5,10,15,20-tetraphenylporphyrin (TPP), tetra(p-dimethylaminophenyl)porphyrin (TDMAPP) and tetra(N-phenylpyrazole) porphyrin (TPPP). Among them, TDMAPP showed the most remarkable response to Hg²⁺. The drastic decrease of the TDMAPP fluorescence intensity was attributed to the formation of a complex between TDMAPP and Hg²⁺, which has been utilized as the fabrication basis of a Hg²⁺-sensitive fluorescence sensor. The analytical performance characteristics of the TDMAPP modified sensor was investigated. The response mechanism, especially involving the response difference of three porphyrin compounds, was discussed in detail. The sensor can be applied to the quantification of Hg²⁺ with a linear range covering from 4.0 × 10⁻⁸ mol L⁻¹ to 4.0 × 10⁻⁶ mol L⁻¹. The limit of detection was 8.0 × 10⁻⁹ mol L⁻¹. The sensor exhibited excellent reproducibility, reversibility and selectivity. Also, the TDMAPP-based sensor was successfully used for the determination of Hg²⁺ in environmental water samples.     

A highly selective pyrene based fluorescent sensor toward Hg detection

A new pyrene-containing fluorescent sensor has been synthesized from 2,3,3-trimethylindolenine. Spectroscopic and photophysical properties of sensor are presented. The large change in fluorescence intensity (I/I₀ = 0.13) at 381 nm and affinity to Hg²⁺ over other cations such as K⁺, Na⁺, Ca²⁺, Mg²⁺, Pb²⁺, and Cu²⁺ make this compound a useful chemosensor for Hg²⁺ detection in hydrophilic media. The sensor (6.0 × 10⁻⁶ M) displays significant fluorescence quenching upon addition of Hg²⁺ in pH 7.4 HEPES buffer without excimer formation. Job’s plot analysis shows the binding stoichiometry to be 2:1 (host/guest).     

Characterization of a carbon paste electrode modified with tripolyphosphate-modified kaolinite clay for the detection of lead

We report about the use of carbon paste electrode modified with kaolinite for analytical detection of trace lead(II) in domestic water by differential pulse voltammetry. Kaolinite clay was modified with tripolyphosphate (TPP) by impregnation method. The results show that TPP in kaolinite clay plays an important role in the accumulation process of Pb(II) on the modified electrode surface. The electroanalytical procedure for determination of Pb(II) comprised two steps: chemical accumulation of the analyte under open-circuit conditions, followed by electrochemical detection of the pre-concentrated species using differential pulse voltammetry. The analytical performance of this system has been explored by studying the effects of preconcentration time, carbon paste composition, pH, supporting electrolyte concentration, as well as interferences due to other ions. The calculated detection limit based on the variability of a blank solution (3s_b criterion) for 10 measurements was 8.4 × 10⁻⁸ mol L⁻¹, and the sensitivity determined from the slope of the calibration graph was 0.910 mol L⁻¹. The reproducibility (RSD) for five replicate measurements at 1.0 mg L⁻¹ lead level was 1.6%. The results indicate that this electrode is sensitive and effective for the determination of Pb²⁺.     

Determination of Hg on poly(vinylferrocenium) (PVF)-modified platinum electrode

A new surface based on poly(vinylferrocenium) (PVF⁺)-modified platinum electrode was developed for determination of Hg²⁺ ions in aqueous solutions. The polymer was electrodeposited on platinum electrode by constant potential electrolysis as PVF⁺ClO₄⁻. Cl⁻ ions were then attached to the polymer matrix by anion exchange and the modified electrode was dipped into Hg²⁺ solution. Hg²⁺ was preconcentrated at the polymer matrix by adsorption and also complexation reaction with Cl⁻. Detection of Hg²⁺ was carried out by differential pulse anodic stripping voltammetry (DPASV) after reduction of Hg²⁺. Mercury ions as low as 5 × 10⁻¹⁰ M could be detected with the prepared electrode and the relative standard deviation was calculated as 6.35% at 1 × 10⁻⁶ M concentration (n = 6). Interferences of Ag⁺, Pb²⁺ and Fe³⁺ ions were also studied at two different concentration ratios with respect to Hg²⁺. The developed electrode was applied to the determination of Hg²⁺ in water samples.     

Construction of a new Cu2+ coated wire ion selective electrode based on 2-((2-(2-(2-(2-hydroxy-5-methoxybenzylidene amino)phenyl)disufanyl)phenylimino)methyl)-4-methoxyphenol Schiff base

In this article a new coated platinum Cu²⁺ ion selective electrode based on 2-((2-(2-(2-(2-hydroxy-5-methoxybenzylideneamino)phenyl)disufanyl)phenylimino) methyl)-4-methoxyphenol Schiff base (L₁) as a new ionophore is described. This sensor has a wide linear range of concentration (1.2 × 10⁻⁷-1.0 × 10⁻¹ mol L⁻¹) and a low detection limit of 9.8 × 10⁻⁸ mol L⁻¹of Cu(NO₃)₂. It has a Nernstian response with slope of 29.54 ± 1.62 mV decade⁻¹ and it is applicable in the pH range of 4.0-6.0 without any divergence in potentioal. The coated electrode has a short response time of approximately 9 s and is stable at least for 3.5 months. The electrode shows a good selectivity for Cu²⁺ ion toward a wide variety of metal ions. The proposed sensor was successfully applied for the determination of Cu²⁺ ion in different real and environmental samples and as indicator electrode for potentiometric titration of Cu²⁺ ion with EDTA.     

A new Hg-selective fluorescent sensor based on a dansyl amide-armed calix[4]-aza-crown

A new fluorescent chemosensor for Hg²⁺ based on a dansyl amide-armed calix[4]-aza-crown was reported. It exhibits high sensitivity and selectivity toward Hg²⁺ over a wide range of metal ions in MeCN-H₂O (4:1, v/v). The association constant of the 1:1 complex formation for 2-Hg²⁺ was calculated to be 1.31 × 10⁵ M⁻¹, and the detection limit for Hg²⁺ was found to be 4.1 × 10⁻⁶ mol L⁻¹.     

An acyclic,dansyl based colorimetric and fluorescent chemosensor for Hg(II) via twisted intramolecular charge transfer (TICT)

An efficient fluorescent chemosensor for Hg²⁺ ion, based on 5-(dimethylamino)-N-(2-mercaptophenyl)naphthalene-1-sulfonamide, has been developed. It exhibits Hg²⁺-selective on–off fluorescence quenching behavior via twisted intramolecular charge transfer (TICT) mechanism, which is rationalized by time dependent density functional theory (TD-DFT) calculations. The system exhibits visible color change from colorless to gray upon Hg²⁺ binding with very high selectivity and sensitivity (as low as 5.0 × 10⁻¹⁰ mol L⁻¹) over other metal ions such as K⁺, Na⁺, Ag⁺, Mn²⁺, Ca²⁺, Ba²⁺, Fe²⁺, Zn²⁺, Pb²⁺, Cu²⁺, Sn²⁺, Cd²⁺, Ni²⁺ and Co²⁺. The present sensing system is also successfully applied for the detection of Hg²⁺ ion in real samples.     

Improved sensitivity for some [corrected] metal ions by use of sulfide in the Belousov-Zhabotinskii oscillating reaction

A highly sensitive method for the determination of trace amounts of transition metal ions by use of sulfide in the Belousov-Zhabotinskii (B-Z) oscillating chemical reaction is proposed. The use of sulfide increased strongly the sensitivity of the B-Z reaction for transition metal ions, such as Ag⁺, Pb²⁺, Hg²⁺, Cd²⁺, Cu²⁺,and Bi³⁺. Results showed that the variational ratio of oscillating period (P_R) is linearly proportional to the negative logarithm of concentration of metal ions. The detection limit is down to 10⁻¹² mol L⁻¹. Various influencing factors on the determination were also examined.     

Electrochemical determination of iodide on a vanadium oxide-polypropylene carbonate coated glassy carbon electrode

A vanadium oxide-modified glassy carbon electrode was simply and conveniently fabricated by casting vanadium tri(isoproxide) oxide (VO(OC₃H₇)₃) and poly(propylene carbonate) (PPC) onto the glassy carbon electrode surface. The electrochemical properties of iodide at the VO(OC₃H₇)₃-PPC film-modified glassy carbon electrode were investigated by cyclic voltammetry, and an anodic peak was observed at approximately +0.71 V (vs. SCE). Based on this, a sensitive and convenient electrochemical method was proposed for the determination of iodide. Flow injection amperometry (FIA) exhibited a good linear relationship with the concentration of iodide in the range of 5 × 10⁻⁷ mol L⁻¹ and 1 × 10⁻³ mol L⁻¹, and the detection limit was 1 × 10⁻⁷ mol L⁻¹. Quantitative recovery of iodide in synthetic samples has been obtained and the interferences from different cations and anions have been studied. The method has been successfully applied to the determination of iodide in dry edible seaweed. The concentrations of iodide measured by this method are in good agreement with those obtained by spectrophotometric method.     

Simultaneous determination of cadmium (II) and lead (II) with clay nanoparticles and anthraquinone complexly modified glassy carbon electrode

An anthraquinone (AQ) improved Na-montmorillonite nanoparticles (nano-SWy-2) chemically modified electrode (CME) has been developed for the simultaneous determination of trace levels of cadmium (II) and lead (II) by differential pulse anodic stripping voltammetry (DPASV). This method is based on a non-electrolytic preconcentration via ion exchange model, followed by an accumulation period via the complex formation in the reduction stage at −1.2 V, and then by an anodic stripping process. The mechanism of this design was proposed and the analytical performance was evaluated with several variables. Under the optimized working conditions, the detection limit was 3 and 1 nM for Cd²⁺ and Pb²⁺, respectively. The calibration graphs were linear in the concentration ranges of 8×10⁻⁹ to 1×10⁻⁶ mol L⁻¹ (Cd²⁺) and of 2×10⁻⁹ to 1×10⁻⁶ mol L⁻¹ (Pb²⁺). Many inorganic species did not interfere with the assay significantly; the high sensitivity, selectivity, and stability of this nano-SWy-2-AQ CME were demonstrated. The applications for the detection of trace levels of Cd²⁺ and Pb²⁺ in milk powder and lake water samples indicate that it is an economical and potent method.     

Construction of a novel molecularly imprinted sensor for the determination of O,O-dimethyl-(2,4-dichlorophenoxyacetoxyl)(3′-nitrophenyl)methinephosphonate

A novel voltammetric sensor for O,O-dimethyl-(2,4-dichlorophenoxyacetoxyl)(3′-nitrophenyl)methinephosphonate (Phi-NO₂) based on molecularly imprinted polymer (MIP) film electrode is constructed by using sol-gel technology. The sensor responds linearly to Phi-NO₂ over the concentration range of 2.0 × 10⁻⁵ to 1.0 × 10⁻⁸ mol L⁻¹ and the detection limit is 1.0 × 10⁻⁹ mol L⁻¹ (S/N = 3). This sensor provides an efficient way for eliminating interferences from coexisting substances in the solution. The high sensitivity, selectivity and stability of the sensor demonstrates its practical application for a simple and rapid determination of Phi-NO₂ in cabbage samples.     

Simultaneous determination of Mn(II), Cu(II) and Fe(III) as 2-(5′-bromo-2′-pyridylazo)-5-diethylaminophenol complexes by adsorptive cathodic stripping voltammetry at a carbon paste electrode

A simple and precise square-wave adsorptive cathodic stripping voltammetry (SW-AdCSV) method has been described for simultaneous determination of Mn(II), Cu(II) and Fe(III) in water samples using a carbon paste electrode. In 0.1 mol L⁻¹ acetate buffer (pH 5) containing 50 μmol L⁻¹ of 2-(5′-bromo-2′-pyridylazo)-5-diethylaminophenol (5-Br-PADAP), Mn(II), Cu(II) and Fe(III) were simultaneously determined as metal-complexes with 5-Br-PADAP following preconcentration onto the carbon paste electrode by adsorptive accumulation at +1.0 V (vs. Ag/AgCl/3 M KCl). Insignificant interference from various cations (K⁺, Na⁺, Mg²⁺, Ca²⁺, Al³⁺, Bi³⁺, Sb³⁺, Se⁴⁺, Zn²⁺, Ni²⁺, Co²⁺, Cd²⁺, Pb²⁺, V⁵⁺, Ti⁴⁺ and NH₄⁺), anions (HCO₃⁻, Cl⁻, NO³⁻, SO₄²⁻ and PO₄³⁻) and ascorbic acid was noticed. Limits of detection of 0.066, 0.108 and 0.093 μg L⁻¹ and limits of quantitation of 0.22, 0.36 and 0.31 μg L⁻¹ Mn(II), Cu(II) and Fe(III), respectively, were achieved by the described method. The described stripping voltammetry method was successfully applied for simultaneous determination of Mn(II), Cu(II) and Fe(III) in ground, tap and bottled natural water samples.     

Triethanolamine-capped CdSe quantum dots as fluorescent sensors for reciprocal recognition of mercury (II) and iodide in aqueous solution

Water-soluble luminescent CdSe quantum dots surface-modified with triethanolamine (TEA-CdSe-QDs) were prepared with high stability. The fluorescence of the TEA-CdSe-QDs was greatly quenched only when Hg²⁺ and I⁻ coexisted in the solution, whereas addition of either Hg²⁺ or I⁻ individually has no noticeable effect on the fluorescence emission. Such a unique quenching effect could be used for reciprocal recognition of mercury (II) ions and/or iodide anions in aqueous solution with rather high selectivity and sensitivity. The detection limits of Hg²⁺ or I⁻ ion were 1.9 × 10⁻⁷ mol L^-1 or 2.8 × 10⁻⁷ mol L⁻¹, respectively. The adequate experiments showed that iodine (I) anions could bridge between TEA-CdSe-QDs and Hg²⁺ to form a stable complex (QDs-I⁻-Hg²⁺) and the following effective electron transfer from the QDs to the Hg²⁺ could be responsible for the fluorescence quenching of QDs.     

Calix[2]furano[2]pyrrole and related compounds as the neutral carrier in silver ion-selective electrode

The performance of calix[2]furano[2]pyrrole and related compounds used as neutral carriers for silver selective polymeric membrane electrode was investigated. The silver ion-selective electrode based on calix[2]furano[2]pyrroles gave a good Nernstian response of 57.1 mV per decade for silver ion in the activity range 1×10⁻⁶ to 1×10⁻² M. The present silver ion-selective electrode displayed very good selectivity for Ag⁺ ion against alkali and alkaline earth metal ions, NH₄⁺, and H⁺. In particular, the present Ag⁺-selective electrode exhibited very low responses towards Hg²⁺ and Pb²⁺ ions. The potentiometric selectivity coefficients of the silver ion-selective electrode exhibited a strong dependence on the solution pH. In particular, the response of the electrode to the Hg²⁺ activity was greatly diminished at pH 2.5 compared to that at pH 5.0. Overall, the performance of the present silver ion-selective electrode based on the ionophore, calix[2]furano[2]pyrrole, is very comparable to that of the electrode prepared with the commercially available neutral carrier in terms of slope, linear range, and detection limits.     

Highly sensitive and selective detection of biothiols using graphene oxide-based “molecular beacon”-like fluorescent probe

A fluorometric method for quantity analysis of biothiols was developed using a graphene oxide (GO)-based “molecular beacon”-like probe, which consisted of FITC labeled thymine (T)-rich single-stranded DNA (ssDNA), GO and Hg²⁺ ions. The labeled ssDNA containing T–T mismatches would self-hybridize to duplex in the presence of Hg²⁺, which can avoid its adsorption on GO and the fluorescence of this GO-based probe was recovered. The fluorescence of the probe quenched after the addition of biothiols such as glutathione (GSH) and cysteine (Cys) owing to thiol groups can selectively competitive ligation of Hg²⁺ ions with T–T mismatches. In the present work, the GO-based probe was used for the determination of GSH and Cys. Under the optimal conditions, a linear correlation was established between fluorescence intensity ratio I₀/I and the concentration of GSH in the range of 2.0 × 10⁻⁹–5.0 × 10⁻⁷ mol L⁻¹ with a detection limit of 1.0 × 10⁻⁹ mol L⁻¹. The linear range for Cys is from 5.0 × 10⁻⁹ to 4.5 × 10⁻⁷ mol L⁻¹ with a detection limit of 2.0 × 10⁻⁹ mol L⁻¹. The proposed method was applied to the determination of GSH in human serum and cell extract samples with satisfactory results.     

Electrical detection of deoxyribonucleic acid hybridization based on carbon-nanotubes/nano zirconium dioxide/chitosan-modified electrodes

A novel and sensitive electrochemical DNA biosensor based on nanoparticles ZrO₂ and multi-walled carbon nanotubes (MWNTs) for DNA immobilization and enhanced hybridization detection is described. The MWNTs/nano ZrO₂/chitosan-modified glassy carbon electrode (GCE) was fabricated and oligonucleotides were immobilized to the GCE. The hybridization reaction on the electrode was monitored by differential pulse voltammetry (DPV) analysis using electroactive daunomycin as an indicator. Compared with previous DNA sensors with oligonucleotides directly incorporated on carbon electrodes, this carbon nanotube-based assay with its large surface area and good charge-transport characteristics increased DNA attachment quantity and complementary DNA detection sensitivity. The response signal increases linearly with the increase of the logarithm of the target DNA concentration in the range of 1.49 × 10⁻¹⁰ to 9.32 × 10⁻⁸ mol L⁻¹ with the detection limit of 7.5 × 10⁻¹¹ mol L⁻¹ (S/N = 3). The linear regression equation is I = 32.62 + 3.037 log C_DNA (mol L⁻¹) with a correlation coefficient value of 0.9842. This is the first application of carbon nanotubes combined with nano ZrO₂ to the fabrication of an electrochemical DNA biosensor with a favorable performance for the rapid detection of specific hybridization.     

Facile synthesis of N-acetyl-L-cysteine capped ZnS quantum dots as an eco-friendly fluorescence sensor for Hg2+

This paper described an investigation of a novel eco-friendly fluorescence sensor for Hg²⁺ ions based on N-acetyl-l-cysteine (NAC)-capped ZnS quantum dots (QDs) in aqueous solution. By using safe and low-cost materials, ZnS QDs modified by NAC were easily synthesized in aqueous medium via a one-step method. The quantitative detection of Hg²⁺ ions was developed based on fluorescence quenching of ZnS QDs with high sensitivity and selectivity. Under optimal conditions, its response was linearly proportional to the concentration of Hg²⁺ ions in a range from 0 to 2.4 × 10⁻⁶ mol L⁻¹ with a detection limit of 5.0 × 10⁻⁹ mol L⁻¹. Most of common physiologically relevant cations and anions did not interfere with the detection of Hg²⁺. The proposed method was applied to the trace determination of Hg²⁺ ions in water samples. The possible quenching mechanism was also examined by fluorescence and UV-vis absorption spectra.     

Sensitive pseudobienzyme electrocatalytic DNA biosensor for mercury(II) ion by using the autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification

Herein, a novel sensitive pseudobienzyme electrocatalytic DNA biosensor was proposed for mercury ion (Hg²⁺) detection by using autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification. Thiol functionalized capture DNA was firstly immobilized on a nano-Au modified glass carbon electrode (GCE). In presence of Hg²⁺, the specific coordination between Hg²⁺ and T could result in the assembly of primer DNA on the electrode, which successfully triggered the HCR to form the hemin/G-quadruplex DNAzyme nanowires with substantial redox probe thionine (Thi). In the electrolyte of PBS containing NADH, the hemin/G-quadruplex nanowires firstly acted as an NADH oxidase to assist the concomitant formation of H₂O₂ in the presence of dissolved O₂. Then, with the redox probe Thi as electron mediator, the hemin/G-quadruplex nanowires acted as an HRP-mimicking DNAzyme that quickly bioelectrocatalyzed the reduction of produced H₂O₂, which finally led to a dramatically amplified electrochemical signal. This method has demonstrated a high sensitivity of Hg²⁺ detection with the dynamic concentration range spanning from 1.0 ng L⁻¹ to 10 mg L⁻¹ Hg²⁺ and a detection limit of 0.5 ng L⁻¹ (2.5 pM) at the 3S_blank level, and it also demonstrated excellent selectivity against other interferential metal ions.