Effects of N2 addition on nanocrystalline diamond films by HFCVD in Ar/CH4 gas mixture

Nanocrystalline diamond (NCD) films were grown on silicon substrates by hot filament chemical vapor deposition in Ar/N₂/CH₄ gas mixtures. The effects of seeding process prior to deposition, the total gas pressure, and concentration of nitrogen on the grain size, morphology and bonding nature in HFCVD technique were investigated. The results indicated that a low total gas pressure is favorable for nanosized diamond crystallites. Films micrograph obtained from scanning electron microscopy showed diamond nanograins elongated with the addition of nitrogen in the plasma. Crystal structure investigations were carried out by X-ray diffraction measurements for deposited films. An increase in the size of crystallite is also observed from XRD measurements in NCD film when nitrogen was added in plasma. From Raman spectra, it was observed that the relative intensity of G peak increases indicating more graphite content after nitrogen added in the plasma. The effects of the nitrogen incorporation in nanocrystalline films in HFCVD are discussed.     

Hydrogenated amorphous carbon thin films deposited by plasma-assisted chemical vapor deposition enhanced by electrostatic confinement: structure,properties, and modeling

Hydrogenated amorphous carbon (a-C:H) is a state-of-the-art material with established properties such as high mechanical resistance, low friction, and chemical inertness. In this work, a-C:H thin films were deposited by plasma-assisted chemical vapor deposition. The deposition process was enhanced by electrostatic confinement that leads to decrease the working pressure achieving relative high deposition rates. The a-C:H thin films were characterized by elastic recoil detection analysis, Rutherford backscattering spectroscopy, scanning electron microscopy, Raman spectroscopy, and nanoindentation measurements. The hydrogen content and hardness of a-C:H thin films vary from 30 to 45 at% and from 5 to 15 GPa, respectively. The hardness of a-C:H thin films shows a maximum as a function of the working pressure and is linearly increased with the shifting of the G-peak position and I _D/I _G ratio. The structure of a-C:H thin films suffers a clustering process at low working pressures. A physical model is proposed to estimate the mean ion energy of carbonaceous species arriving at the surface of a-C:H thin films as a function of processing parameters as pressure and voltage and by considering fundamentals scattering events between ion species and neutral molecules and atoms.     

Reactive sputter deposition and metal–semiconductor transition of FeS films

FeS polycrystalline films were prepared on float glass by radio-frequency reactive sputtering. X-ray diffraction, scanning electron microscopy, Rutherford backscattering, and secondary ion mass spectroscopy were used to characterize the films. The effects of the deposition parameters, such as sputter power and substrate temperature, on the morphological structure and on the metal–semiconductor phase transition of FeS films were investigated. It has been found that the films show a substrate temperature dependent preferential orientation and phase-transition temperature. PACS 81.15.Cd; 68.55.Jk     

脉冲偏压电弧离子镀CNx薄膜研究

用脉冲偏压电弧离子镀通过控制不同的氮流量在(100)单晶Si基片上制备了不同成分的CN_x薄膜.用光学显微镜,XPS,XRD,激光Raman和Nanoindenter等方法研究了薄膜的形貌、成分、结构和性能.结果表明,薄膜表面平整致密、氮含量随着氮流量的降低而降低、结构为非晶且为类金刚石薄膜;随着氮含量从18.9%降低到5.3%(摩尔百分比,全文同),薄膜的硬度和弹性模量单调增加而且增幅较大,其中硬度从15.0 GPa成倍增加到30.0 GPa;通过氮流量的调整能够敏感地改变薄膜中的sp³键的含量,是CN_x薄膜的硬度和弹性模量获得大幅度调整的本质原因. 关键词： x薄膜')" href="#">CN_x薄膜 脉冲偏压 电弧离子镀 硬度     

Characteristics of N-doped TiO2 thin films grown on unheated glass substrate by inductively coupled plasma assisted dc reactive magnetron sputtering

N-doped TiO₂ thin films have been deposited on unheated glass substrates by an inductively coupled plasma (ICP) assisted direct current (dc) reactive magnetron sputtering. All films were produced in the metallic mode of sputtering in order to achieve a high deposition rate. The structures and properties of the N-doped TiO₂ films were studied by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, field emission scanning electron microscopy and UV–Vis spectrophotometer. Experimental results show that we can obtain well crystallized N-doped anatase phase TiO₂ thin films at low deposition temperature and at high deposition rate by using the ICP assisted dc reactive magnetron sputtering process. The doping of nitrogen into TiO₂ lattices leads to a smooth shift of the absorption band toward visible light regions.     

Effects of nitrogen doping on optical properties of TiO2 thin films

The potential for extending the optical absorption range of TiO₂ by doping with nonmetallic elements was examined in nitrogen-containing TiO₂ thin films. Thin films of TiO_2-xN_x were synthesized on glass and silicon substrates by ion-beam-assisted deposition to obtain a wide range of nitrogen concentrations. The compositions of the films were determined by Rutherford backscattering spectrometry and X-ray photoelectron spectroscopy. The structures of the films were analyzed by X-ray diffraction, transmission electron microscopy, and atomic force microscopy. The optical properties of the films were measured by UV-Vis spectroscopy and ellipsometry. A characteristic decreasing trend in band-gap values of the films was observed within a certain range of increasing dopant concentrations. As the nitrogen concentration increased, the structure of the films evolved from a well-defined anatase to deformed anatase. The reduced band gaps are associated with the N 2p orbital in the TiO_2-xN_x films. PACS 78.66.-w; 78.20.Ci     

RF-plasma assisted pulsed laser deposition of nitrogen-doped SrTiO3 thin films

Perovskite-type nitrogen substituted SrTiO₃ thin films were deposited with a one-step process by RF-plasma assisted pulsed laser deposition from a SrTiO₃ target using a N₂ plasma, while deposition with a NH₃ plasma yields films with almost no incorporated nitrogen. The deposited films exhibit a cubic perovskite-type crystal structure and reveal oriented growth on MgO(100) substrates. The unit cell parameters of the studied N-doped SrTiO₃ films range within 3.905<a<3.918 Å, which is slightly larger than for SrTiO₃ (a=3.905 Å). The nitrogen content in the deposited films varies from 0.2 to 0.7 atom%. The amount of incorporated nitrogen in the films decreases with increasing RF-power, while the N₂ flow rate does not have any pronounced influence on the N content. Nitrogen incorporation results in an increased optical absorption at 400–600 nm, which is associated with N(2p) energy states that have a higher energy level than the valence band in strontium titanate. The optical band gap energies in the studied N-doped SrTiO₃ films are at 3.2–3.3 eV, which is very similar to that of pure strontium titanate (～3.2 eV). Films deposited with NH₃ for the RF-plasma exhibit a lower degree of crystallinity and reveal almost no nitrogen incorporation into the crystal lattice.     

Electrosynthesis and characterization of CdSe thin films: Optimization of preparative parameters by photoelectrochemical technique

CdSe thin films have been electrodeposited potentiostatically onto stainless-steel and fluorine-doped tin oxide-coated glass substrates from an aqueous acidic bath using cadmium acetate ((CH₃COO)₂Cd·2H₂O) as a Cd ion source. Preparative parameters such as deposition potential, solution concentration, bath temperature, pH of the electrolytic bath and deposition time have been optimized by using photoelectrochemical (PEC) technique to obtain well adherent and uniform thin films. The electrodeposits were dark brown in colour. The films have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical absorption techniques. XRD studies reveal that films are polycrystalline, with hexagonal crystal structure. SEM shows that the films are compact, with spherical grains. Optical absorption studies reveal that the material exhibits a direct optical transition having band gap energy ∼1.72 eV. PEC study shows that the films are photoactive.     

辉光放电等离子体辅助XeCl准分子激光溅射沉积碳氮薄膜

利用直流辉光放电等离子体辅助的脉冲激光沉积技术在Si衬底上生长了碳氮薄膜.通过扫描电子显微镜、X射线衍射、X射线光电子能谱、俄歇电子能谱等多种手段,对薄膜的形貌、成分、晶体结构、价键状态等特性进行了分析和确定.结果表明,沉积薄膜为含有非晶SiN和晶态氮化碳颗粒结构,晶态成分呈多晶态,主要为α-C₃N₄相、β-C₃N₄相,晶粒大小为40—60nm.碳氮之间主要以C-N非极性共价键形式相结合. 关键词： 脉冲激光沉积 直流辉光放电 碳氮薄膜     

One-step preparation of N-doped strontium titanate films by pulsed laser deposition

Perovskite-type oxynitrides exhibit promising electrical and optical properties and can possibly be used in the future as functional materials for electrical, photo-, and electrochemical applications. Continuous heterovalent substitution of oxygen ions by nitrogen ions allows tuning of the desired optical and/or electronic properties to the application specifications. In the present work deposition of SrTiO₃:N films by pulsed reactive crossed beam laser ablation was studied in order to examine the influence of different deposition parameters on the film crystallinity and composition. The deposited films exhibit a perovskite-type crystal structure and reveals epitaxial growth on MgO(100) substrates. The unit cell parameters of the deposited SrTiO₃:N films range within , which is slightly larger than for polycrystalline SrTiO₃ (a=3.905). The studied films reveal an oxygen content in the range of (2.70-2.98)±0.15. The relative N content (vs. O) can be tuned within the range of 1.0–3.0% by adjusting the deposition parameters. The N:O concentration ratio increases with increasing laser fluence and target-to-substrate distances, while the substrate temperature has a more complex influence on the nitrogen concentration. In the range of 580–650 °C the [N]/[O] ratio increases while further heating results in a gradual decrease of the N content. PACS  81.15.Fg; 68.55.-a; 81.05.Zx     

Optical and structural studies on Ba(Mg1/3Ta2/3)O3 thin films obtained by radiofrequency assisted pulsed plasma deposition

Single-phase Ba(Mg_1/3Ta_2/3)O₃ thin films were prepared by radiofrequency plasma beam assisted pulsed laser deposition (RF-PLD) starting from a bulk ceramic target synthesized by solid state reaction. Atomic force microscopy, X-ray diffraction and spectroscopic ellipsometry were used for morphological, structural and optical characterization of the BMT thin films. The X-ray diffraction spectra show that the films exhibit a polycrystalline cubic structure. From spectroscopic ellipsometry analysis, the refractive index varies with the thin films deposition parameters. By using the transmission spectra and assuming a direct band to band transition a band gap value of ≈4.72 eV has been obtained.     

Metal vapor vacuum-arc ion implantation effects on the adhesion and hardness of ion-beam deposited Cr/Cu films

Two groups of Cr/Cu multilayer films were deposited on surfaces of Si (1 0 0) crystal and Al₂O₃ ceramic, respectively. One group was prepared by both metal vapor vacuum-arc (MEVVA) ion implantation and ion beam assistant deposition (IBAD) technologies with different sputtering ion densities and deposition times. The other group was prepared only by IBAD. The morphologies of the Cr/Cu films and cross-section micrographs were observed by scanning electron microscopy (SEM). Nanohardness, modulus, and adhesive strength of the Cr/Cu films were measured by a nano-indenter. Continuous stiffness measurement (CSM) was used while measuring nanohardness and modulus of the samples. The experimental data indicate that the adhesive strength of the samples prepared with MEVVA ion implantation was about 3-3.5 times higher than one of the corresponding samples prepared without MEVVA ion implantation. The nanohardness and modulus of the Cr/Cu films were obviously affected by the test parameters and substrate kind.     

A study of structural, compositional and optical properties of spray-deposited non-stoichiometric (Zn,Fe)S thin films

Non-stoichiometric ternary chalcogenides (Zn,Fe)S were prepared in the film form by pyrolytic spray deposition technique, using air/nitrogen as the carrier gas. The precursor solution comprised of ZnCl₂, FeCl₂ and thiourea. The depositions were carried out under optimum conditions of experimental parameters viz. carrier gas (air/nitrogen) flow rate, concentration of precursor constituents, nozzle substrate distance and temperature of quartz substrate. The deposited thin films were later sintered in argon at 1073 K for 120 min.The structural, compositional and optical properties of the sintered thin films were studied. X-ray diffraction studies of the thin films indicated the presence of (Zn,Fe)S solid solution with prominent cubic sphalerite phase while surface morphology as determined by scanning electron microscopy (SEM) revealed a granular structure.The chemical composition of the resulting thin films as analyzed by energy dispersive X-ray analysis (EDAX) reflected the composition of the precursor solutions from which the depositions were carried out with Fe at% values ranging from 0.4 up to 33.SEM micrographs of thin films reveal that the grain sizes of the thin films prepared using air as carrier gas and N₂ as carrier gas are in the vicinity of 300 and 150 nm, respectively.The diffuse transmittance measurements for thin films, as a function of wavelength reveal the dependence of direct optical band gap on Fe content and type of phase.     

Effect of deposition method on the optical and microstructural properties of vacuum-deposited MgF2 thin films

The optical and structural properties of magnesium fluoride films deposited by conventional e-beam evaporation and sputtering have been investigated herein. Deposition processes were carried out on the glass substrates in the absence of any reactive gases. The results show that the deposition method has a considerable effect on the optical and microstructural properties MgF₂ film. Also, the results show that the deposition parameters of the sputtered MgF₂ films can be easily controlled to yield the desired layer. The optical, chemical, and structural properties of the deposited MgF₂ films were characterized by using spectrophotometer, X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy, and atomic force microscopy.     

Direct ion beam deposition of polymeric styrene films and in situ characterization by electron spectroscopy

Polymeric styrene films with thicknesses ranging from about one nm up to a few m have been deposited by means of a direct ion beam deposition (IBD) technique. The deposition energy, which can be chosen independently of the parameters which govern the plasma conditions, has been varied between few eV and 1000 eV. The correlation between the deposition parameters and the resulting film properties in terms of the electronic structure is discussed. The in situ characterization by electron spectroscopy has proved to be a very useful characterization method and ultraviolet photoelectron spectroscopy in particular revealed an extremely high sensitivity to structural differences in the deposited films. The polymeric films have also been characterized by scanning electron microscopy and optical spectroscopy. These techniques have also served to compare films prepared by the direct IBD technique with films obtained by standard rf plasma polymerization (RFPP) in a tubular reactor. Significant differences have been found which are dependent on the deposition parameters; these are discussed in detail.Department of Chemical Engineering, Beijing Institute of Technology, P.O. Box 327 Beijing, 100081 Beijing, P.R. China     

离子束溅射制备Nb2O5光学薄膜的特性研究

研究了离子束溅射(IBS)制备的Nb₂O₅薄膜的光学特性、应力、薄膜微结构等特性,系统地分析了辅助离子源的离子束能量和离子束流对薄膜特性的影响.结果显示,在辅助离子源不同参数情况下,折射率在波长550 nm处为2.310—2.276,应力值为-281—-152 MPa.在合适的工艺参数下,消光系数可小于10^-4,薄膜具有很好的表面平整度.与用离子辅助沉积(IAD)制备的薄膜相比,IBS制备的薄膜具有更好的光学特性和薄膜微结构. 关键词： 2O₅薄膜')" href="#">Nb₂O₅薄膜 离子束溅射 光学特性 应力     

Pulsed laser deposition of semiconducting crystalline double-doped barium titanate thin films on nickel substrates

We synthesized by pulsed laser deposition (Ba,Sr,Y)TiO₃ and (Ba,Pb,Y)TiO₃ thin films on mechanically polished nickel substrates.The synthesized thin films were analyzed for: crystalline structure by X-ray diffractometry, morphology and surface topography by atomic force microscopy, optical and scanning electron microscopy, and elemental composition by energy dispersive X-ray spectroscopy and electrical properties by electrical measurements.We have shown that film properties were determined by the dopants, target composition, and deposition parameters (oxygen pressure, substrate temperature and incident laser fluence). All films exhibited a semiconducting behavior, as proved by the decrease of electrical resistance with heating temperature.     

Growth and structural characterization of YMnO3 thin films grown by pulsed liquid injection MOCVD on Si and SrTiO3 substrates

Optimum parameters for the growing of YMnO₃ films by pulsed liquid injection metalorganic chemical vapor deposition have been studied. Si substrates were used for the optimization of the deposition process. X-ray diffraction (XRD) and transmission electron microscopy (TEM) results show that polycrystalline single phase YMnO₃ films can be obtained for an optimal ratio of Y and Mn on the injected solution and either amorphous, metastable orthorhombic, and/or hexagonal YMnO₃ phases can be obtained depending on the deposition temperature and precursors ratio. In a second stage, YMnO₃ films were grown on SrTiO₃ substrates. Pure epitaxial orthorhombic YMnO₃ phase was confirmed by XRD. The films microstructure, characterized by scanning electron microscopy and TEM, shows a columnar growth. Each columnar grain grows epitaxially with three possible orientations.     

Growth and structure of Bi0.5(Na0.7K0.2Li0.1)0.5TiO3 thin films prepared by pulsed laser deposition technique

Bi_0.5(Na_0.7K_0.2Li_0.1)_0.5TiO₃ (BNKLT) thin films were prepared on Pt/Ti/SiO₂/Si substrates by pulsed laser deposition (PLD) technique. The films prepared were examined by using X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The effects of the processing parameters, such as oxygen pressure, substrate temperature and laser power, on the crystal structure, surface morphology, roughness and deposition rates of the thin films were investigated. It was found that the substrate temperature of 600 °C and oxygen pressure of 30 Pa are the optimized technical parameters for the growth of textured film, and all the thin films prepared have granular structure, homogeneous grain size and smooth surfaces.     

Growth and characterization of nanostructured anatase phase TiO<Subscript>2</Subscript> thin films prepared by DC reactive unbalanced magnetron sputtering

Titanium dioxide thin films were deposited on three different unheated substrates by unbalanced magnetron sputtering. The effects of the sputtering current and deposition time on the crystallization of TiO₂ thin films were studied. The TiO₂ thin films were deposited at three sputtering current values of 0.50, 0.75, and 1.00 A with different deposition times of 25, 35, and 45 min, respectively. The surface morphology of the films was investigated by atomic force microscopy (AFM). The structure was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The film thickness was determined by field emission scanning electron microscopy (FE-SEM), and the optical property was evaluated with spectroscopic ellipsometry. The results show that polycrystalline anatase films were obtained at a low sputtering current value. The crystallinity of the anatase phase increases as the sputtering current increases. Furthermore, nanostructured anatase phase TiO₂ thin films were obtained for all deposition conditions. The grain size of TiO₂ thin films was in the range 10–30 nm. In addition, the grain size increases as the sputtering current and deposition time increase.