A novel strategy for synthesis of amphiphilic π-shaped copolymers by RAFT polymerization

The amphiphilic π-shaped copolymers with narrow molecular weight distribution (M_w/M_n = 1.04-1.09) based on polystyrene (PSt) and poly(ethylene glycol) have been synthesized successfully. The reversible addition-fragmentation transfer (RAFT) polymerization of St in the presence of dibenzyl trithiocarbonate and N,N′-azobis(isobutyronitrile) (AIBN) yielded macro RAFT agent PSt-SC(S)S-PSt, subsequent reaction with excess maleic anhydride (MAh) at 80 °C in tetrahydrofuran afforded the PSt-MAh-SC(S)S-MAh-PSt. It was used as RAFT agent in the RAFT polymerization of St, and finally the amphiphilic π-shaped copolymers were obtained by the reaction of MAh with hydroxyl-terminated poly(ethylene glycol methyl ether) at 90 °C for 48 h. Their structures were confirmed by FT-IR and ¹H NMR spectra, and their molecular weight and molecular weight distribution were measured by gel permeation chromatography.     

Combining Steric and Electrostatic Stabilization Using Hydrophilic MacroRAFT Agents in an Ab Initio Emulsion Polymerization of Styrene

Hydrophilic (co)polymers carrying a thiocarbonyl thio end group such as poly(dimethylaminoethyl methacrylate), poly(ethylene oxide), and poly(ethylene oxide)‐block‐poly(dimethylaminoethyl methacrylate) have been evaluated as precursors of stabilizers in batch ab initio emulsion polymerization of styrene under acidic conditions to form electrosterically stabilized polystyrene latex particles. As a mixture of P(DMAEMA/H⁺Cl⁻)‐RAFT and PEO‐RAFT failed to give satisfactory results, PEO‐RAFT was used as a control agent for the RAFT polymerization of DMAEMA, and the resulting block copolymer was successfully used in ab initio styrene emulsion polymerization.

     

Ab initio Emulsion Polymerization by RAFT (Reversible Addition–Fragmentation Chain Transfer) through the Addition of Cyclodextrins

A novel process to produce homo‐ and copolymers by RAFT polymerization in emulsion is presented. It is known that RAFT‐controlled radical polymerization can be conducted in emulsion polymerization without disturbing the radical segregation characteristic of this process, thus leading to polymerization rates identical to those encountered in the corresponding nonliving systems. However, RAFT agents are often characterized by very low water solubility and, therefore, they diffuse very slowly from the monomer droplets, where they are initially solubilized, to the reaction loci, i.e., the polymer particles. Accordingly, when used in emulsion polymerization, they are practically excluded from the reaction. In this work, we show that cyclodextrins, well‐known for their ability to form water‐soluble complexes with hydrophobic molecules, facilitate the transport across the H₂O phase of the RAFT agent to the polymer particles. Accordingly, chains grow through the entire process in a controlled way. This leads to the production of low‐polydispersity polymers with well‐defined structure and end functionalities as well as to the possibility of synthesizing block copolymers by a radical mechanism.     

RAFT‐mediated emulsion polymerization of styrene using brush copolymer as surfactant macro‐RAFT agent: Effect of the brush copolymer sequence and chemical composition

The nonionic amphiphilic brush polymers such as poly[poly(ethylene oxide) methyl ether vinylphenyl‐co‐styrene] trithiocarbonate [P(mPEGV‐co‐St)‐TTC] and poly[poly(ethylene oxide) methyl ether vinylphenyl‐b‐styrene‐b‐poly(ethylene oxide) methyl ether vinylphenyl] trithiocarbonate [P(mPEGV‐b‐St‐b‐mPEGV)‐TTC] with different monomer sequence and chemical composition are synthesized and their application as macro‐RAFT agent in the emulsion RAFT polymerization of styrene is explored. It is found that the monomer sequence in the brush polymers exerts great influence on the emulsion RAFT polymerization kinetics, and the fast polymerization with short induction period in the presence of P(mPEGV‐co‐St)‐TTC is demonstrated. Besides, the chemical composition in the brush polymer macro‐RAFT agent effect on the emulsion RAFT polymerization is investigated, and the macro‐RAFT agent with high percent of the hydrophobic PS segment leads to fast and well controlled polymerization. The growth of triblock copolymer colloids in the emulsion polymerization is checked, and it reveals that the colloidal morphology is ascribed to the hydrophobic PS block extension, and the P(mPEGV‐co‐St) block almost have no influence just on the size of the colloids. This may be the first example to study the monomer sequence and the chemical composition in the macro‐RAFT agent on emulsion RAFT polymerization, and will be useful to reveal the block copolymer particle growth. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Synthesis characterizations and properties of a new fluoro-maleimide polymer

Novel 4-(4-trifluoromethyl)phenoxy N-phenyl-maleimide (FPMI) was synthesized. The free radical-initiated polymerization of FPMI was carried out in 1,4-dioxane solution using azobisisobutyronitrile as initiator. The monomer was investigated by FTIR, ¹H NMR, ¹³C NMR and elemental analysis, while the polymer was investigated by FTIR, ¹H NMR and ¹³C NMR. The effect of the monomer concentration, initiator concentration and temperature on the rate of polymerization (R_p) was studied. The activation energy of the polymerization was calculated (ΔE = 48.94 kJ/mol). The molecular weight of PFPMI and polydispersity index of the polymer were determined by gel permeation chromatography and were equal to 73,500, 16,700 and 2.27, respectively. The properties of PFPMI, including thermal behavior, thermal stability, the glass transition temperature (T_g = 236 °C), photo-stability, solubility and solution viscosity were studied.     

Rate Optimization in Controlled Radical Emulsion Polymerization Using RAFT

Summary: Means of improving rates in RAFT‐mediated radical emulsion polymerizations are developed, by setting out strategies to minimize the inhibition and retardation that always are present in these systems. These effects arise from the RAFT‐induced exit of radicals, the desorption of the RAFT‐reinitiating radical from the particles, and the specificity of the reinitiating radical to the RAFT agent. Methods for reducing the inhibition period such as using a more hydrophobic reinitiating radical are predicted to show a significant improvement in the inhibition periods. The time‐dependent behavior of the RAFT adduct to the entering radical and the RAFT‐induced exit (loss) of radicals from particles are studied using a previously described Monte Carlo model of RAFT/emulsion particles. It is shown that an effective way of reducing the rate coefficient for the exit of radicals from the particles is to use a less active RAFT agent. Techniques for improving the rate of polymerization of RAFT/emulsion systems are suggested based upon the coherent understanding contained in these models: the use of an oligomeric adduct to the RAFT agent, a less water‐soluble RAFT re‐initiating group, and a less active RAFT agent.

Populations of the different types of particles (left axis) along with the concentration of the initial RAFT agent, D_R (right axis), as a function of time.     

Synthesis of new substituted cyclopentadienyl titanium monomethoxydifluorides with BF3 · OEt2 as fluorinating reagent and their use in syndiotactic polymerization of styrene

Five substituted cyclopentadienyl titanium trimethoxide complexes, RCpTi(OMe)₃ (R=Me (2b), ⁱPr (2c), Me₃Si (2d), allyl (2e), PhCH₂ (2f)), were prepared. By reacting RCpTi(OMe)₃ with BF₃OMe₂, six RCpTiF₂(OMe) (R=H (3a), Me (3b), ⁱPr (3c), Me₃Si (3d), allyl (3e), PhCH₂ (3f)) were obtained. When activated with methylaluminoxane (MAO), the activities of RCpTiF₂(OMe) system were less than those of RCpTi(OMe)₃ system in solution polymerization of styrene, but the polymers made by RCpTiF₂(OMe) exhibited higher Mw and melting point than those by RCpTi(OMe)₃. Both systems produced polymers with similar syndiotacticities in the range 92.4-97.6%. Introduction of a substituent group into the Cp-ligand enhanced the melting points of the polymers, and meanwhile decreased the catalytic activities of RCpTi(OMe)₃/MAO and RCpTiF₂(OMe)/MAO systems, where the order of activity was RCp=Cp > MeCp > ⁱPrCp > Me₃SiCp > CH₂CHCH₂Cp > PhCH₂Cp. Complexes 2a (CpTi(OMe)₃) and 3a showed the highest activities respectively for both systems, and are three to four times more active than CpTiCl₃. In bulk polymerization, the difference of activities between RCpTi(OMe)₃/MAO and RCpTiF₂(OMe)/MAO systems became small, where complexes 2e and 3e exhibited remarkably higher activities compared with their solution polymerization activities. The maximum polymerization activities were found at the polymerization temperature of 50 °C for most of the complexes. The influence of the polymerization time (t_P), polymerization temperature (T_P) and Al/Ti ratio on the activities of complexes 2b and 3b were investigated. It was observed that the initial rate of propagation of complex 2b was higher than that of complex 3b and the highest activities of both catalysts were reached at the relatively low Al/Ti ratio of 150 and decrease for larger ratios.     

End‐Functionalized Palladium SCS Pincer Polymers via Controlled Radical Polymerizations

A direct and facile route toward semitelechelic polymers, end‐functionalized with palladated sulfur–carbon–sulfur pincer (Pd^II‐pincer) complexes is reported that avoids any post‐polymerization step. Key to our methodology is the combination of reversible addition‐fragmentation chain‐transfer (RAFT) polymerization with functionalized chain‐transfer agents. This strategy yields Pd end‐group‐functionalized materials with monomodal molar mass dispersities (Đ ) of 1.18–1.44. The RAFT polymerization is investigated using a Pd^II‐pincer chain‐transfer agent for three classes of monomers: styrene, tert‐butyl acrylate, and N‐isopropylacrylamide. The ensuing Pd^II‐pincer end‐functionalized polymers are analyzed using ¹H NMR spectroscopy, gel‐permeation chromatography, and elemental analysis. The RAFT polymerization methodology provides a direct pathway for the fabrication of Pd^II‐pincer functionalized polymers with complete end‐group functionalization.

     

Controlled/living cationic polymerization of styrene with BF3OEt2 as a coinitiator in the presence of water: Improvements and limitations

The controlled/living cationic polymerization of styrene using R-OH/BF₃OEt₂ (R-OH = 1-phenylethanol (1), 2-phenyl-2-propanol (2) and 1-(4-methoxyphenyl)ethanol (3)) at 0 °C in CH₂Cl₂ and in the presence of water was investigated. With 1/BF₃OEt₂, the poor control over molecular weight and molecular weight distribution was ascribed to a competitive protonic initiation induced by water. The molecular weight of the polymers obtained with 2/BF₃OEt₂ and 3/BF₃OEt₂ at low water content ([H₂O] ? 0.11 M) increased in direct proportion to the monomer conversion in agreement with the calculated values, assuming that one initiator molecule generates one polymer chain, but the molecular weight distribution was found relatively broad (M_w/M_n ∼ 1.8). ¹H NMR analyses confirmed that polymerization proceeds via reversible activation of C-OH terminus, but some loss of hydroxyl functionality was revealed. Some trials using high water contents in the recipe ([H₂O] ? 1.6 M) produced only traces of polymer due to catalyst decomposition.     

Synthesis and structures of adamantyl-substituted constrained geometry cyclopentadienyl-phenoxytitanium complexes and their catalytic properties for olefin polymerization

A number of new constrained geometry titanium complexes, [η⁵: η¹-2-C₅Me₄-4-R-6-Ad-C₆H₂O]TiCl₂ [Ad = adamantyl, R = Me (8), ^tBu (9)] and [η⁵: η¹-C₅H₂Ph₂-4-^tBu-6-Ad-C₆H₂O]TiCl₂ (10), were synthesized from reactions of TiCl₄ either directly with corresponding free ligands, 2-C₅Me₄H-4-R-6-Ad-C₆H₂OH [R = Me (5), ^tBu (6)], or with the dilithium salt of the free ligand 2-C₅H₃Ph₂-4-^tBu-6-Ad-C₆H₂OH (7). These new titanium complexes were fully characterized by ¹H and ¹³C NMR spectroscopy and elemental analyses, and the molecular structures of 8 and 9 were determined by single-crystal X-ray crystallography. Upon activation with AlⁱBu₃ and Ph₃CB(C₆F₅)₄ (TIBA/B), these complexes exhibit high catalytic activity for 5-ethylidene-2-norbornene (ENB) polymerization as well as ethylene/1-hexene and ethylene/ENB copolymerization with good tacticity-control ability for the ENB polymerization and high comonomer incorporation ability for the copolymerization reactions. It was found that the bulky adamantyl substituent at the ortho position of the phenoxy group in the ligands of these complexes apparently influences the molecular weight and the microstructure of the resultant polymers.     

Photoenzymatic RAFT Emulsion Polymerization with Oxygen Tolerance

Photoenzymatic reversible addition-fragmenatation chain transfer(RAFT) emulsion polymerization, surfactant-free or ab initio, of various monomers is reported with oxygen tolerance. In surfactant-free emulsion polymerizatoin, poly(N,N-dimethylacrylamide)s were used as stabilizer blocks for emulsion polymerization of methyl acrylate, n-butyl acrylate and styrene, producing well-defined amphiphilic block copolymers, including those with an ultrahigh molecular weight, at quantitative conversions. The controlled character of surfactant-free emulsion polymerization was confirmed by kinetic studies, chain extension studies and GPC analyses. Temporal control was demonstrated by light ON/OFF experiments. In ab initio emulsion polymerization of methyl acrylate and methyl methacrylate, low-dispersity hydrophobic polymers were synthesized with predictable molecular weights. This study extends the monomer scope suitable for photoenzymatic RAFT polymerization from hydrophilic to hydrophobic monomers and demonstrates that oxygen-tolerance can be equally achieved for emulsion polymerization with excellent RAFT control.     

An Emulsifier‐Free RAFT‐Mediated Process for the Efficient Synthesis of Cerium Oxide/Polymer Hybrid Latexes

Hybrid latexes based on cerium oxide nanoparticles are synthesized via an emulsifier‐free process of emulsion polymerization employing amphiphatic macro‐RAFT agents. Poly(butyl acrylate‐co‐acrylic acid) random oligomers of various compositions and chain lengths are first obtained by RAFT copolymerization in the presence of a trithiocarbonate as controlling agent. In a second step, the seeded emulsion copolymerization of styrene and methyl acrylate is carried out in the presence of nanoceria with macro‐RAFT agents adsorbed at their surface, resulting in a high incorporation efficiency of cerium oxide nanoparticles in the final hybrid latexes, as evidenced by cryo‐transmission electron microscopy.     

Vinyl addition polymerization of norbornene catalyzed by β-iminoamine Ni(II) complexes/methylaluminoxane systems

Two nickel(II) complexes (A and B) bearing β-iminoamine ligands, [2-(ArNCH)-C₆H₄-NMe₂] (La, Ar = 2,6-i-Pr₂C₆H₃; Lb, Ar = 2,6-Me₂C₆H₃), were synthesized and characterized by elemental analyses and ¹H NMR. X-ray crystal structure of complex B reveals that the six-membered chelate ring adopts a envelope conformation, with nickel(II) atom deviating from the plane of backbone aromatic ring by 1.164 Å. In the presence of methylaluminoxane (MAO), both complexes showed moderate activities of 10⁵ g mol_Ni⁻¹ h⁻¹ for norbornene polymerization. β-iminoamine Ni(II)/MAO catalysts gave unimodal polymers (M_w, 3.16-8.02 × 10⁵ g/mol) with a relatively narrow MWD (M_w/M_n, 1.59-2.14), indicative of single-site catalyst behavior. The obtained polymers are vinyl-type polynorbornenes (PNBs), which are soluble in common solvents such as toluene, cyclohexane and dichlorobenzene.     

Carbazyl RAFT agents synthesized by an improved aqueous phase method and their applications in RAFT polymerization

A series of carbazyl dithiocarbamates as RAFT agents, i.e. benzyl 9H-carbazole-9-carbodithioate (B), 1-phenylethyl 9H-carbazole-9-carbodithioate (C), cumyl 9H-carbazole-9-carbodithioate (D) and tert-butyl 9H-carbazole-9-carbodithioate (E), were successfully synthesized by an improved aqueous phase method based on a nucleophilic substitution reaction between sodium carbazole-9-carbodithioate (A) and alkyl halides at room temperature. Furthermore, the optimum reaction conditions and synthetic technology were sought. Compared with the traditional oil-phase method, the expected high-purity RAFT agents were obtained in the form of crystal that was precipitated and separated from the aqueous solution, so that vast organic solvents for purification were avoided. The activities of the carbazyl dithiocarbamates obtained as RAFT agents for the polymerizations of both styrene and methyl methacrylate were determined. The results show that all of the RAFT agents above mentioned are of significant activity in the RAFT polymerization of styrene, but only D has obvious activity in the RAFT polymerization of methyl methacrylate. Therefore, both the novel synthetic method and the carbazyl dithiocarbamates obtained possess potential application in the RAFT polymerization.     

Synthesis of poly(vinyl acetate) with fluorescence via a combination of RAFT/MADIX and “click” chemistry

A novel ω-azido-functionalized RAFT reagent, O-(2-azido-ethyl) S-benzyl dithiocarbonate (AEBDC), was synthesized and subsequently employed to mediate the reversible addition-fragmentation chain transfer (RAFT) polymerization of vinyl acetate (VAc) to prepare end-functionalized polymers. The polymerization results showed that the RAFT polymerizations of VAc could be well controlled using AEBDC as the RAFT agent. Number-average molecular weights (M_n GPC) increased linearly with monomer conversion, and molecular weight distributions were relatively narrow. ¹H NMR spectrum of the poly(vinyl acetate) (PVAc) confirmed the existence of functional azido group at the end of the polymers chains. The ω-azido-terminated polymers were coupled by “click” chemistry with a fluorescent alkyne, 7-propinyloxy coumarin, to prepare fluorescent PVAc. The fluorescence properties of the PVAc homopolymers before and after coupling with 7-propinyloxy coumarin in CH₂Cl₂ solution were investigated.     

Synthesis and properties of thermally cross-linkable main-chain azobenzene polymers containing diacetylene moieties

A series of main chain azobenzene polymers containing diacetylene moieties with different lengths of the spacer {-[CC-CH₂-O-C₆H₄-OCO-(CH₂)_m-O-C₆H₄-NN-C₆H₄-O-(CH₂)_m-OCO-C₆H₄-O-CH₂-CC]_n-, where m = 3, 6, 11} were synthesized by oxidative coupling polymerization. These polymers had molecular weights of 17,600-68,600 and polydispersity indices of 1.2-1.8 as determined by gel permeation chromatography using polystyrene as a standard. Their structures and properties were characterized and evaluated with NMR, FT-IR, X-ray diffraction (XRD), thermogravimetry (TG), differential scanning calorimetry (DSC) and nonlinear optical (NLO) analyses. All the polymers could be cross-linked at the elevated temperatures due to the polymerization reactions of the diacetylene groups in the polymer backbone, and the cross-linked polymers showed dramatically modified properties, such as thermal stability and solvent resistance. The third-order nonlinear susceptibilities of the cross-linked polymers were evaluated by means of the Z-scan technique and calculated to be 3.60 × 10⁻⁹, 2.73 × 10⁻⁹, 2.28 × 10⁻⁹ esu, respectively, whereas the un-cross-linked polymers showed no obvious NLO property.     

Cationic η-allyl sulfide complexes of nickel(II) for the polymerization of butadiene in aqueous emulsion

Reaction of the dimeric allyl-nickel(II) chloro complex [Ni(η³-C₃H₅)(μ-Cl)]₂ (5) with sulfur donor ligands (L = L₁₀-L₁₃) in the presence of ( = 3,5-(CF₃)₂C₆H₃) gives the corresponding cationic mononuclear complexes of the type [Ni(η³-C₃H₅)(L)₂]⁺ (1-4) [L = L₁₀ = diphenyl sulfide (1); L = L₁₁ = 4,4′-thiodiphenol (2); L = L₁₂ = 4,4′-thio-bis(6-tert-butyl-o-cresol) (3); L = L₁₃ = 4,4′-thio-bis (6-tert-butyl-m-cresol) (4)]. All of these complexes were characterized by elemental analysis and NMR spectroscopy, as well as the representative complex 3 additionally by single-crystal X-ray analysis. In comparison to the known complex [Ni(η³-C₃H₅)(η⁶-BHT)][B] (BHT = 3,5-di-tert-butyl-4-hydroxytoluene), the herein described cationic complexes show an increased stability towards water. The activity of the complexes for butadiene polymerization in aqueous emulsions was studied.     

Highly active polymerization of methyl methacrylate catalyzed by Pd-based β-ketoiminato complexes/MAO systems

The substituted β-ketoiminato palladium(II) complexes, Pd[CH₃C(O)CHC(NAr)CH₃](Pph₃)(Me) (1 Ar = α-napthyl, 2 Ar = fluorenyl), when was activated by methylaluminoxane (MAO), were used as highly active catalysts for methyl methacrylate (MMA) polymerization. The effects of temperature, co-catalyst to catalyst molar ratio and polymerization time on catalyst activities were reported. Structural analyses of the polymers by ¹H NMR spectra indicated that polymerization yielded poly(methyl methacrylate) (PMMA) with moderate syndiotactic microstructures. The polymerization results showed that PMMAs obtained using these complexes possibly arose from a coordination-insertion mechanism rather than a radical mechanism.     

Synthesis of multi-arm star polystyrene with hyperbranched polyether core

Multi-arm star polystyrenes with hyperbranched poly(3-ethyl-3-oxetanemethanol) (PEOM, 3) core were synthesized by atom transfer radical polymerization (ATRP) method. The structures of polymers were confirmed by FT-IR and ¹H NMR. GPC results showed that the resultant polymers had relatively low polydispersity indices (PD = 1.47-2.03). DSC analysis indicated that polystyrene star polymers had a glass transition temperature (T_g = 42.2-91.5 °C) that changed with the amount of the polystyrene in the polymers. In addition, the aggregation behavior of the multi-arm star polystyrenes in a selective solvent (THF/cyclohexane) was probed with polystyrene arms that encapsulated in the aggregates and PEOM cores hidden in the center of the micelles.